Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ARCS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

Vacuum arc melting of tungsten-hafnium-carbon alloy

The vacuum arc casting of tungsten alloys, which contain carbon as an alloy addition, require special melting procedures in order to produce melts of consistent controlled levels of alloy content. A melting procedure will be described in which elemental components of a tungsten 0.35% HfC alloy are assembled to form an electrode for ac vacuum arc melting to produce 3-in.-diam ingots. Melting procedures and analytical chemistry are discussed and compared with data for ingots produced by other techniques.

Ammon, R. L.↗

Use of ballistic arcs for low thrust navigation enhancement in the 1980 Encke slow flyby

A technique is presented for improving navigation accuracy in the Solar Electric Encke Slow Flyby Mission proposed to encounter the comet Encke during its 1980 apparition. The effect of the dominant navigation error source, the high level thruster noise, is reduced through the introduction of a ballistic coast arc for the purpose of orbit determination enhancement. The placement and duration of the arc is investigated with respect to its impact on final delivery error and on control effort required for trajectory correction. Also examined are the changes in delivery accuracy and control effort as a result of the time lag between the state estimation process and the thrust control program update.

Jacobson, R. A.↗

Grain refinement control in TIG arc welding

A method for controlling grain size and weld puddle agitation in a tungsten electrode inert gas welding system to produce fine, even grain size and distribution is disclosed. In the method the frequency of dc welding voltage pulses supplied to the welding electrode is varied over a preselected frequency range and the arc gas voltage is monitored. At some frequency in the preselected range the arc gas voltage will pass through a maximum. By maintaining the operating frequency of the system at this value, maximum weld puddle agitation and fine grain structure are produced.

Iceland, W. F.↗

Emission spectrometric arcing procedure with minimal effect of chemical form of sample

Matrix effects related to the chemical form of analyzed materials were studied. An arc in argon was used which was buffered with silver chloride. The effect of chemical form was minimal for a variety of metals, oxides, and carbides representing the most refractory compounds and thermally stable metal-containing molecules. Only four of the most refractory materials known showed significant emission depressions due to incomplete volatilization in the arc system. These results are discussed in terms of vapor pressures of the solid materials placed on the anodes and dissociation reactions of the molecules in the gaseous environment.

Gordon, W. A.↗

A new arc heater shroud test technique for thermo-structural testing of full-scale, nose-tip skirt materials

An arc heater shroud test technique was developed for thermostructural testing of full-scale, missile nose tip-skirt assemblies. Reentry trajectory simulation is provided by changing the arc heater operation in a prescribed manner through manual and automatic controls. Excellent test repeatability allows screening of materials by direct comparison of test results. Continuous recordings of model surface temperature, pressure, heat flux, and model internal temperatures are made at several locations during the test.

Williams, R. R.↗

Model of Birkeland currents associated with an auroral arc

The ionospheric configuration of the vertical Birkeland currents associated with an auroral arc is calculated from a model based on the assumption that the auroral electrons constitute a net current into the ionosphere. It is further assumed that the return vertical current out of the ionosphere is impeded along the field lines which connect the arc to the magnetosphere. The magnitude, location, and structure of the return Birkeland current calculated from the model agree well with measurements of these parameters by a rocket-borne experiment.

Vondrak, R. R.↗

Sensitivity analysis of short-arc station coordinate determinations from range data

The accurate determination of the geocentric coordinates of a tracking station is essential for most geodetic and geophysical satellite applications. Since most of these satellites are close to the earth, the geopotential model is a dominant source of error which significantly influences station coordinate determinations. Other sources, such as GM error and drag, also influence the accuracy of the station coordinate determination. One technique for reducing the effect of these errors is to use short-arcs consisting of a few passes of the satellite over the tracking station. This paper analyzes the sensitivity of short-arc station coordinate estimates to various errors in the physical model, to the number of observations, and to the station-satellite geometry using simulated as well as real data.

Schutz, B. E.↗

Emission spectrometric arcing procedure with minimal effect of chemical form of sample

This paper describes a study of matrix effects related to the chemical form of materials analyzed. The study was made using an arc in argon buffered with silver chloride. The effect of chemical form was minimal for a variety of metals, oxides, and carbides representing the most refractory compounds and thermally stable metal-containing molecules. Among these, only four of the most refractory materials known showed significant emission depressions due to incomplete volatilization in the arc system. These results are discussed in terms of vapor pressure of the solid materials placed on the anodes and dissociation reactions of the molecules in the gaseous environment.

Gordon, W. A.↗

Spherical harmonic representation of the gravity field of Mars using a short-arc technique

Planetary gravity fields are primarily determined from Doppler tracking of orbiting spacecraft which are typically in high eccentricity orbits. Thus, the non-central gravitational components perturb the orbit primarily in the vicinity of periapsis. To find a computationally efficient technique and to reduce the influence of unmodeled forces on the spacecraft, an analysis has been performed of the effectiveness of processing only data in the vicinity of periapsis using multiple short arcs. Mariner 9 data are processed for the study, using 1, 2, 3 and 4 hour arcs and estimating gravity fields from 4th through 7th degree. The resulting gravity fields are inter-compared and also compared with previously published results.

Daniels, E. F.↗

Sensitivity analysis of short-arc station coordinate determinations from range data

The accurate determination of the geocentric coordinates of a tracking station is essential for most geodetic and geophysical satellite applications. Since most of these satellites are close to the earth, the geopotential model is a dominant source of error which significantly influences station coordinate determinations. Other sources, such as GM error and drag, also influence the accuracy of the station coordinate determination. One technique for reducing the effect of these errors is to use short-arcs consisting of a few passes of the satellite over the tracking station. This paper analyzes the sensitivity of short-arc station coordinate estimates to various errors in the physical model, to the number of observations, and to the station-satellite geometry using simulated as well as real data.

Schutz, B. E.↗

Rocket measurements of electrons in a system of multiple auroral arcs

A Nike-Tomahawk rocket was launched into a system of auroral arcs northward of Poker Flat Research Range, Fairbanks, Alaska. The pitch-angle distribution of electrons was measured at 2.5, 5, and 10 keV and also at 10 keV on a separating forward section of the payload. The auroral activity appeared to be the extension of substorm activity centered to the east. The rocket crossed a westward-propagating fold in the brightest band. The electron spectrum was relatively hard through most of the flight, showing a peak in the range from 2.5 to 10 keV in the weaker aurora and below 5 keV in the brightest arc. The detailed structure of the pitch-angle distribution suggested that, at times, a very selective process was accelerating some electrons in the magnetic field direction, so that a narrow field-aligned component appeared superimposed on a more isotropic distribution. It is concluded that this process could not be a near-ionosphere field-aligned potential drop, although the more isotropic component may have been produced by a parallel electric field extending several thousand kilometers along the field line above the ionosphere.

Boyd, J. S.↗

On the computational cost of approximating and recognizing noise-perturbed straight lines and quadratic arcs in the plane

Recognition of underlying straight lines and quadratic arcs in line drawings, and approximation of very noisy data by such line/curve segments, is addressed as a subproblem of the more general problem of optimum recognition of complicated line/curve drawings. Some specific algorithms are presented with extensions and interpretations for more complicated applications, and a data generation model is developed for the problem. Data are generated as a perturbation of a single underlying straight line or an elliptic or hyperbolic arc. Recursive estimation techniques, minimization of central processing unit time, decision making with controlled error probabilities, and modeling and recognition of pictures consisting of noisy curves are dealt with. Applications envisaged include: picture data compression, contour line representation in maps, intelligent data searches, and ballistic missile decoy tracking.

Cooper, D. B.↗

Observations of intense velocity shear and associated electrostatic waves near an auroral arc

Simultaneous measurements of energetic particles and ac electric fields made by the javelin sounding rocket NASA 8:56 during the late expansion phase of a magnetic storm have revealed an intense shear in plasma flow of magnitude 20 (m/s)/m at the edge of an auroral arc. Structure with two characteristic scales sizes is displayed in the region of shear. Larger structures are of the order of several kilometers in size. Intense irregularities with characteristic wavelengths smaller than the scale size of the shear have also been detected. The large-scale changes in the orientation of the charge sheet at the edge of the arc may be due to the Kelvin-Helmholtz branch; shorter-wavelength modes may be related to the shear driven resistive drift wave. Observations are consistent with the suggestion that velocity shear instabilities may play a role in the formation of high-latitude irregularities.

Kelley, M. C.↗

Low arc drop hybrid mode thermionic converter

The hybrid mode operation for the reduction of plasma drops is being investigated. This report discusses the results obtained from two molybdenum emitter converters. One converter had a molybdenum collector and the other a nickel collector. The molybdenum collector converter was operated in a hybrid mode (at an interelectrode distance of 1.7 mm) and produced a minimum barrier index of 1.96 eV at an emitter temperature of 1500 K. The arc drop was calculated to be 0.14 eV, using the published results for a molybdenum collector. On the other hand, the nickel collector converter was operated in a conventional ignited mode (at an interelectrode distance of 0.5 mm) and produced a minimum barrier index of 2.1 eV at an emitter temperature of 1700 K. It is tentatively concluded that a large-gap operation of the hybrid mode converter permits the diffusion of cesium ions to a distance in the order of one millimeter for an effective neutralization of electron space charge. By employing a low work function collector (1.55 eV) in a hybrid mode converter with an arc drop of 0.14 eV, it appears that a barrier index as low as 1.69 eV could be achieved.

Shimada, K.↗

A sustained-arc ignition system for internal combustion engines

A sustained-arc ignition system was developed for internal combustion engines. It produces a very-long-duration ignition pulse with an energy in the order of 100 millijoules. The ignition pulse waveform can be controlled to predetermined actual ignition requirements. The design of the sustained-arc ignition system is presented in the report.

Birchenough, A. G.↗

Nonlinear singularly perturbed optimal control problems with singular arcs

A third order, nonlinear, singularly perturbed optimal control problem is considered under assumptions which assure that the full problem is singular and the reduced problem is nonsingular. The separation between the singular arc of the full problem and the optimal control law of the reduced one, both of which are hypersurfaces in state space, is of the same order as the small parameter of the problem. Boundary layer solutions are constructed which are stable and reach the outer solution in a finite time. A uniformly valid composite solution is then formed from the reduced and boundary layer solutions. The value of the approximate solution is that it is relatively easy to obtain and does not involve singular arcs. To illustrate the utility of the results, the technique is used to obtain an approximate solution of a simplified version of the aircraft minimum time-to-climb problem. A numerical example is included.

Ardema, M. D.↗

Short arc reduction of radar altimetry computer program

The Air Force Geophysics Laboratory computer program SARRA (Short Arc Reduction of Radar Altimetry) has been used for geoid determination with altimetric observations from the GEOS-3 satellite. An important feature of SARRA is the simultaneous recovery of the orbit parameters and the surface coefficients as defined by covariance function weights. Orbits good to approximately 20 meters are adequate for precise geoid determinations by virtue of the orbital adjustment in the reductions. Altimetric data over a portion of the North Atlantic Ocean have been processed to derive the regional geoid and gravity field. Analyses of altimeter residuals resulting from the short arc adjustment show that the residuals can be used to define the neglected higher order geoidal undulations with high fidelity and continuity.

Hadgigeorge, G.↗

On the emission mechanism in high current hollow cathode arcs

Large hollow cathodes have been operated in a magnetoplasmadynamic arc over wide ranges of current and mass flow, with orifice current densities and mass fluxes encompassing those encountered in low current steady state hollow cathode arcs. Detailed cathode interior measurements of current and potential distributions show that maximum current penetration into the cathode is about one diameter axially upstream from the tip, with peak inner surface current attachment up to one cathode diameter upstream of the tip. The spontaneous attachment of peak current upstream of the cathode tip is suggested as a criterion for characteristic hollow cathode operation. This empirical criterion was verified by experiment.

Krishnan, M.↗