Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “AIRFOILS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

An Exploratory Investigation of a Slotted, Natural-Laminar-Flow Airfoil

A 15-percent-thick, slotted, natural-laminar-flow (SNLF) airfoil, the S103, for general aviation applications has been designed and analyzed theoretically and verified experimentally in the Langley Low-Turbulence Pressure Tunnel. The two primary objectives of high maximum lift and low profile drag have been achieved. The constraints on the pitching moment and the airfoil thickness have been satisfied. The airfoil exhibits a rapid stall, which does not meet the design goal. Comparisons of the theoretical and experimental results show good agreement. Comparison with the baseline, NASA NLF(1)-0215F airfoil confirms the achievement of the objectives.

Somers, Dan M.↗

Experimental Study of Tip Vortex Flow from a Periodically Pitched Airfoil Section

An experimental investigation of a tip vortex from a NACA0012 airfoil is conducted in a low-speed wind tunnel at a chord Reynolds number of 4x10(exp 4). Initially, data for a stationary airfoil held at various angles-of-attack (alpha) are gathered. Detailed surveys are done for two cases: alpha=10 deg with attached flow and alpha=25 deg with massive flow separation on the upper surface. Distributions of various properties are obtained using hot-wire anemometry. Data include mean velocity, streamwise vorticity and turbulent stresses at various streamwise locations. For all cases, the vortex core is seen to involve a mean velocity deficit. The deficit apparently traces to the airfoil wake, part of which gets wrapped by the tip vortex. At small alpha, the vortex is laminar within the measurement domain. The strength of the vortex increases with increasing alpha but undergoes a sudden drop around alpha (is) greater than 16 deg. The drop in peak vorticity level is accompanied by transition and a sharp rise in turbulence within the core. Data are also acquired with the airfoil pitched sinusoidally. All oscillation cases pertain to a mean alpha=15 deg while the amplitude and frequency are varied. An example of phase-averaged data for an amplitude of +/-10 deg and a reduced frequency of k=0.2 is discussed. All results are compared with available data from the literature shedding further light on the complex dynamics of the tip vortex.

vortex flows↗

Influence of Airfoil Angle of Attack on Ice Accretion Roughness

The influence of airfoil angle attack on roughness evolution and spatial variation was investigated in the Icing Research Tunnel (IRT) at the NASA Glenn Research Center. Two airfoil models were used for the study: a 53.34-cm (21-in.) NACA 0012 model and a 152.4-cm (60-in.) HAARP-II model. For the NACA 0012, the angle of attack was varied from 0° to 3°, and the ice accretion roughness was characterized while keeping the other icing parameters such as freestream velocity, freestream stagnation temperature, accumulation parameter, and median volumetric diameter (MVD) constant. For the HAARP-II, the angle of attack was varied from -1.9°, which is the non-lifting angle of attack for the airfoil, to 3°. A series of accumulation time progression cases for the HAARP-II at 2.3° angle of attack was also performed in Appendix C and Appendix O conditions and compared to the measurements presented by McClain et al. (2018) for the non-lifting angle of attack condition. The results demonstrate the strong influence of the changing local static pressure along the surface influencing the roughness characteristics. A correlation approach for the maximum equivalent sand-grain roughness along the surface of an airfoil is presented and considers the scaled accumulation time, the stagnation point freezing fraction, and the surface pressure relative to the static and stagnation pressures of the flow. Finally, an attempt to relate the maximum roughness quantities to local pressure coefficients and local icing quantities is presented and discussed.

Icing↗

Wavy flow cooling concept for turbine airfoils

An airfoil including an outer wall and a cooling cavity formed therein. The cooling cavity includes a leading edge flow channel located adjacent a leading edge of the airfoil and a trailing edge flow channel located adjacent a trailing edge of the airfoil. Each of the leading edge and trailing edge flow channels define respective first and second flow axes located between pressure and suction sides of the airfoil. A plurality of rib members are located within each of the flow channels, spaced along the flow axes, and alternately extending from opposing sides of the flow channels to define undulating flow paths through the flow channels.

Liang, George↗

Nonlinear power flow feedback control for improved stability and performance of airfoil sections

A computer-implemented method of determining the pitch stability of an airfoil system, comprising using a computer to numerically integrate a differential equation of motion that includes terms describing PID controller action. In one model, the differential equation characterizes the time-dependent response of the airfoil's pitch angle, .alpha.. The computer model calculates limit-cycles of the model, which represent the stability boundaries of the airfoil system. Once the stability boundary is known, feedback control can be implemented, by using, for example, a PID controller to control a feedback actuator. The method allows the PID controller gain constants, K.sub.I, K.sub.p, and K.sub.d, to be optimized. This permits operation closer to the stability boundaries, while preventing the physical apparatus from unintentionally crossing the stability boundaries. Operating closer to the stability boundaries permits greater power efficiencies to be extracted from the airfoil system.

97 MATHEMATICS AND COMPUTING↗

Damping element for reducing the vibration of an airfoil

An airfoil (10) is provided with a tip (12) having an opening (14) to a center channel (24). A damping element (16) is inserted within the opening of the center channel, to reduce an induced vibration of the airfoil. The mass of the damping element, a spring constant of the damping element within the center channel, and/or a mounting location (58) of the damping element within the center channel may be adjustably varied, to shift a resonance frequency of the airfoil outside a natural operating frequency of the airfoil.

42 ENGINEERING↗

Turbine airfoil to shroud attachment method

Bi-casting a platform (50) onto an end portion (42) of a turbine airfoil (31) after forming a coating of a fugitive material (56) on the end portion. After bi-casting the platform, the coating is dissolved and removed to relieve differential thermal shrinkage stress between the airfoil and platform. The thickness of the coating is varied around the end portion in proportion to varying amounts of local differential process shrinkage. The coating may be sprayed (76A, 76B) onto the end portion in opposite directions parallel to a chord line (41) of the airfoil or parallel to a mid-platform length (80) of the platform to form respective layers tapering in thickness from the leading (32) and trailing (34) edges along the suction side (36) of the airfoil.

17 WIND ENERGY↗

Turbine airfoil with controlled area cooling arrangement

A gas turbine airfoil includes a serpentine cooling path with a plurality of channels fluidly interconnected by a plurality of turns for cooling the airfoil wall material. A splitter component is positioned within at least one of the channels to bifurcate the channel into a pressure-side channel passing in between the outer wall and the inner wall of the pressure side and a suction-side channel passing in between the outer wall and the inner wall of the suction side longitudinally downstream of an intermediate height. The cross-sectional area of the pressure-side channel and suction-side channel are thereby controlled in spite of an increasing cross-sectional area of the airfoil along its longitudinal length, ensuring a sufficiently high mach number to provide a desired degree of cooling throughout the entire length of the airfoil.

42 ENGINEERING↗

An Integrated Design Approach for Infill Patterning of Fused Deposition Modeling and its Application to an Airfoil

We present a new approach to incorporate an internal stress distribution into the design of infill via fused deposition modeling of additive manufacturing (AM). This design approach differs from topology optimization, since the topology optimization of AM focuses on changing the overall shape of the product, whereas the approach we propose in this research focuses on the porous infill and remains the overall shape of the product intact. The approach presented here is effective if the overall shape is an important functioning aspect of a product and the stress is applied to the entire body, not to given localized points. As an application, we demonstrate an airfoil with its infill densities optimized based on the pressure applied during operation. Specifically, the stress of an airfoil is analyzed with operational loading conditions. The local density of the infill pattern is determined based on the computational stress analysis. The infill geometry is mathematically generated using a circle packing algorithm. Test results show that the airfoil with the optimized infill outperforms the same shape with the traditional uniform infill pattern of an airfoil having the same weight.

Kim, Pum↗

Internal cooling system with converging-diverging exit slots in trailing edge cooling channel for an airfoil in a turbine engine

An airfoil (10) is disclosed for a gas turbine engine in which the airfoil (10) includes an internal cooling system (14) with one or more converging-diverging exit slots (20) configured to increase the effectiveness of the cooling system (14) at the trailing edge (34) of the airfoil (10) by increasing the contact of cooling fluids with internal surfaces (24, 30) of the pressure and suction sides (36, 38) of the airfoil (10). In at least one embodiment, the trailing edge cooling channel (18) may include one or more converging-diverging exit slots (20) to further pressurize the trailing edge cooling channel (18) and may be formed by a first and second ribs (80, 82) extending between an outer walls (13, 12) forming the pressure and suction sides (36, 38). The converging-diverging exit slot (20) may be formed from a first converging section (84) having an inlet (86) with a larger cross-sectional area than an outlet (88) and is formed from a second diverging section (90) having an inlet (92) with a smaller cross-sectional area than an outlet (94).

42 ENGINEERING↗

Airfoil with CMC liner and multi-piece monolithic ceramic shell

An airfoil includes an airfoil section that has an airfoil wall that surrounds a cavity. The airfoil wall includes an exterior monolithic ceramic shell and an interior CMC liner that has CMC plies. An outermost ply of the CMC plies forms tabs that are raised from an underlying ply so as to define a slot. The exterior monolithic ceramic shell includes an underlapping shell piece and an overlapping shell piece. The underlapping shell piece has a portion disposed in the slot and bonded with the tabs. The overlapping shell piece extends over the tabs and is bonded to the tabs. There are channels bounded by adjacent ones of the tabs, the underlapping shell piece, and the overlapping shell piece. Channel orifices through the CMC liner connect the cavity and the channels.

Martin, Thomas J.↗

On the design of airfoils in which the transition of the boundary layer is delayed

A method is presented for designing suitable thickness distributions and mean camber lines for airfoils permitting extensive chordwise laminar flow. Wind tunnel and flight tests confirming the existence of laminar flow; possible maintenance of laminar flow by area suction; and the effects of wind tunnel turbulence and surface roughness on the promotion of premature boundary layer transition are discussed. In addition, estimates of profile drag and scale effect on maximum lift of the derived airfoils are made.

BOUNDARY LAYER CONTROL - AIRFOILS↗

Topology optimization of an airfoil fin microchannel heat exchanger using artificial intelligence

High-performance microchannel heat exchangers are needed to supply heat for power conversion for nuclear microreactors. An airfoil fin microchannel design, constructed of Alloy 617 with helium as the working fluid, is analyzed and optimized using a design of experiments with artificial intelligence techniques. The use of airfoil fins offers the potential to reduce pressure drop across the heat exchanger, as compared to other types of channel configurations. A framework for topology optimization of airfoil fin printed circuit heat exchangers (PCHEs) has been developed that can be readily extended to different fin sizes and shapes, as well as different inlet and operating conditions, materials of construction, and working fluids. An optimization procedure is developed that employs computational fluid dynamics for a set of design points identified using Latin hypercube sampling. Computational fluid dynamics is used to analyze a simplified two-channel configuration where five design parameters are varied – inlet angle, fin scale, extent of staggering, transverse and longitudinal pitches. Two methods (a 5D polynomial and a regression neural network) are compared for generating surrogate models and the resulting response surface approximation is input to a genetic algorithm that is used to identify a set of optimal parameters. The optimal geometries are found across six channel Reynolds numbers ranging from 1000 to 5000, since inlet conditions affect flow through the heat exchanger. Additionally, a set of optimal designs that maximizes heat transfer and minimizes pressure drop is identified, and a thermal stress analysis is performed on the optimal design. Correlations for the Nusselt number and Darcy friction factor are developed that can be useful for thermal hydraulic analyses using system codes. Thermal stresses are analyzed and a brief discussion of the status of code cases of PCHEs for nuclear applications is given. Testing and thermomechanical modeling is needed to facilitate future code compliance of PCHEs for high pressure and high temperature applications.

42 ENGINEERING↗

Vapor deposition on doublet airfoil substrates: Control of coating thickness and microstructure

Gas jet assisted vapor deposition processes for depositing coatings are conducted at higher pressures than conventional physical vapor deposition methods, and have shown promise for coating complex shaped substrates including those with non-line-of-sight (NLS) regions on their surface. These regions typically receive vapor atoms at a lower rate and with a wider incident angular distribution than substrate regions in line-of-sight (LS) of the vapor source. To investigate the coating of such substrates, the thickness and microstructure variation along the inner (curved) surfaces of a model doublet airfoil containing both LS and NLS regions has been investigated. Results from atomistic simulations and experiments confirm that the coating's thickness is thinner in flux-shadowed regions than in other regions for all the coating processes investigated. They also indicated that the coatings columnar microstructure and pore volume fraction vary with surface location through the LS to NLS transition zone. A substrate rotation strategy for optimizing the thickness over the entire doublet airfoil surface was investigated, and led to the identification of a process that resulted in only small variation of coating thickness, columnar growth angle, and pore volume fraction on all doublet airfoil surfaces.

42 ENGINEERING↗

The aerodynamic characteristics of six commonly used Airfoils over a large range of positive and negative angles of attack

This paper presents the results of tests of six commonly used airfoils: the CYH, the N-22, the C-72, the Boeing 106, and the Gottingen 398. The lifts, drags, and pitching moments of the airfoils were measured through a large range of positive and negative angles of attack. The tests were made in the variable density wind tunnel of the National Advisory Committee for Aeronautics at a large Boeing 106, and the Gottingen 398 airfoils, the negative maximum lift coefficients were found to be approximately half the positive; but for the M-6 and the CYH, which have less effective values were, respectively, 0.8 and 0.6 of the positive values.

AIRFOILS - GOETTINGER 398 - CHAR , C P & ORDINATES↗

Characteristics of an Airfoil as Affected by Fabric Sag

This report presents the results of tests made at a high value of the Reynolds Number in the N.A.C.A. variable-density wind tunnel to determine the aerodynamic characteristics of an airfoil as affected by fabric sag. Tests were made of two Gottingen 387 airfoils, one having the usual smooth surface and the other having a surface modified to simulate two types of fabric sag. The results of these tests indicate that the usual sagging of the wind covering between ribs has a very small effect on the aerodynamic characteristics of an airfoil.

AIRFOILS - GOTETTINGEN 387 - CHAR , C P & ORDINATE↗

Experiments with an Airfoil from which the Boundary Layer Is Removed by Suction

Our attempts to improve the properties of airfoils by removing the boundary layer by suction, go back to 1922. The object of the suction is chiefly to prevent the detachment of the boundary layer from the surface of the airfoil. At large angles of attack, such detachment prevents the attainment of the great lift promised by the theory, besides greatly increasing the drag, especially of thick airfoils. This report gives results of those experiments.

BOUNDARY LAYER REMOVAL - SUCTION↗

LPV Modeling and Control for Active Flutter Suppression of a Smart Airfoil

In this paper, a novel technique of linear parameter varying (LPV) modeling and control of a smart airfoil for active flutter suppression is proposed, where the smart airfoil has a groove along its chord and contains a moving mass that is used to control the airfoil pitching and plunging motions. The new LPV modeling technique is proposed that uses mass position as a scheduling parameter to describe the physical constraint of the moving mass, in addition the hard constraint at the boundaries is realized by proper selection of the parameter varying function. Therefore, the position of the moving mass and the free stream airspeed are considered the scheduling parameters in the study. A state-feedback based LPV gain-scheduling controller with guaranteed H infinity performance is presented by utilizing the dynamics of the moving mass as scheduling parameter at a given airspeed. The numerical simulations demonstrate the effectiveness of the proposed LPV control architecture by significantly improving the performance while reducing the control effort.

Smart Airfoil↗