Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ADSORPTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

Effective Zinc Adsorption Driven by Electrochemical Redox Reactions of Birnessite Nanosheets Generated by Solar Photochemistry

The surface properties, chemical compositions, and crystal structures of manganese oxides can be altered by redox reactions, which affect their heavy metal ion adsorption capacities. Here, birnessite nanosheets (δ-MnO 2 ) were synthesized from the photochemical reaction of Mn 2+ aq and nitrate under solar irradiation, and Zn 2+ was electrochemically adsorbed using the as-obtained birnessite nanosheets by galvanostatic charge–discharge. The effects of current density and electrochemical techniques (symmetric electrode and three-electrode systems) on Zn 2+ adsorption capacity were also investigated. The results showed that the maximum Zn 2+ adsorption capacity of the birnessite in the presence of electrochemical redox reactions could reach 383.2 mg g –1 (589.0 mmol mol –1 ) and 442.6 mg g –1 (680.3 mmol mol –1 ) in the symmetric electrode and three-electrode system, respectively; however, the Mn 2+ release capacity in the three-electrode system was higher than that in the symmetric electrode system. With increasing current density, the Zn 2+ adsorption capacity decreased. In addition, the system for heavy metal ion removal driven by electrochemical redox reactions could also be used as a supercapacitor for power storage. Here, the present work proposes a “green” and sustainable approach for preparing nanosized birnessite, and it clarifies the adsorption mechanism of birnessite for Zn 2+ in the presence of electrochemical redox reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Molecular dynamics simulations of H{sub 2} adsorption in tetramethyl ammonium lithium phthalocyanine crystalline structures.

Tetramethyl ammonium lithium phthalocyanine is explored as a potential material for storage of molecular hydrogen. Density functional theory calculations are used to investigate the molecular structure and the dimer conformation. Additional scans performed to determine the interactions of a H{sub 2} molecule located at various distances from the molecular sites are used to generate a simple force field including dipole-induced-dipole interactions. This force field is employed in molecular dynamics simulations to calculate adsorption isotherms at various pressures. The regions of strongest adsorption are quantified as functions of temperature, pressure, and separation between molecules in the adsorbent phase, and compared to the regions of strongest binding energy as given by the proposed force field. It is found that the total adsorption could not be predicted only from the spatial distribution of the strongest binding energies; the available volume is the other contributing factor even if the volume includes regions of much lower binding energy. The results suggest that the complex anion is primarily involved in the adsorption process with molecular hydrogen, whereas the cation serves to provide access for hydrogen adsorption in both sides of the anion molecular plane, and spacing between the planes.

08 HYDROGEN↗

Adsorption of hydrogen on boron-doped graphene: A first-principles prediction

The doping effects of boron on the atomic adsorption of hydrogen on graphene have been investigated using density functional theory calculations. The hydrogen adsorption energies and electronic structures have been considered for pristine and B-doped graphene with the adsorption of hydrogen on top of carbon or boron atom. It is found that the B-doping forms an electron-deficient structure, and decreases the hydrogen adsorption energy dramatically. For the adsorption of hydrogen on top of other sites, similar results also have been found. These results indicate that the hydrogen storage capacity is improved by the doping of B atom.

08 HYDROGEN↗

Thermodynamic formalism of water uptakes on solid porous adsorbents for adsorption cooling applications

This Letter presents a thermodynamic formulation to calculate the amount of water vapor uptakes on various adsorbents such as zeolites, metal organic frameworks, and silica gel for the development of an advanced adsorption chiller. This formalism is developed from the rigor of the partition distribution function of each water vapor adsorptive site on adsorbents and the condensation approximation of adsorptive water molecules and is validated with experimental data. An interesting and useful finding has been established that the proposed model is thermodynamically connected with the pore structures of adsorbent materials, and the water vapor uptake highly depends on the isosteric heat of adsorption at zero surface coverage and the adsorptive sites of the adsorbent materials. Employing the proposed model, the thermodynamic trends of water vapor uptakes on various adsorbents can be estimated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Elucidating the effects of adsorbent flexibility on fluid adsorption using simple models and flat-histogram sampling methods

Using flat-histogram Monte Carlo methods, we investigate the adsorptive behavior of the square-well fluid in two simple slit-pore-like models intended to capture fundamental characteristics of flexible adsorbent materials. Both models require as input thermodynamic information about the flexible adsorbent material itself. An important component of this work involves formulating the flexible pore models in the appropriate thermodynamic (statistical mechanical) ensembles, namely, the osmotic ensemble and a variant of the grand-canonical ensemble. Two-dimensional probability distributions, which are calculated using flat-histogram methods, provide the information necessary to determine adsorption thermodynamics. For example, we are able to determine precisely adsorption isotherms, (equilibrium) phase transition conditions, limits of stability, and free energies for a number of different flexible adsorbent materials, distinguishable as different inputs into the models. While the models used in this work are relatively simple from a geometric perspective, they yield non-trivial adsorptive behavior, including adsorption-desorption hysteresis solely due to material flexibility and so-called “breathing” of the adsorbent. The observed effects can in turn be tied to the inherent properties of the bare adsorbent. Some of the effects are expected on physical grounds while others arise from a subtle balance of thermodynamic and mechanical driving forces. In addition, the computational strategy presented here can be easily applied to more complex models for flexible adsorbents.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Molecular Simulations of Adsorption and Diffusion of RDX in IRMOF-1

In order to test the feasibility of using metal-organic frameworks (MOFs) to pre-concentrate explosive molecules for detection, molecular simulations of hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX) within IRMOF-1 were performed. Grand canonical Monte Carlo (GCMC) simulations were used to generate adsorption isotherms for pure RDX, RDX in dry air, and RDX in wet air. In addition to the isotherms, the GCMC simulations provide adsorption energies and density distributions of the adsorbates within the MOF. Molecular dynamics simulations calculate diffusivities and provide a detailed understanding of the change in conformation of the RDX molecule upon adsorption. The presence of dry air has little influence on the amount of RDX that adsorbs. The presence of wet air increases the amount of RDX that adsorbs due to favorable interactions between RDX and water. We found a Henry's law constant of 21.2 mol/kg/bar for both pure RDX and RDX in dry air. The RDX adsorption sites are located (i) in big cages, (ii) near a vertex, and (iii) between benzene rings. The energy of adsorption of RDX at infinite dilution was found to be - 9.2 kcal/mol. The distributions of bond lengths, bond angles and torsion angles in RDX are uniformly slightly broader in the gas phase than in the adsorbed phase, but not markedly so. The self-diffusivity of RDX in IRMOF-1 is a strong function of temperature, with an activation energy of 6.0 kcal/mol.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The development and potential uses of an Adsorption Water Collection System for the Trash Compaction Processing System designed for operation in the International Space Station Express Rack

The use of adsorption as an alternative to current state of the art water collection and phase separation methods for human space flight is being investigated at NASA Ames Research Center. A system called the Adsorption Water Recovery System was designed to work with the Trash Compaction Processing System. The system uses modular adsorption columns that can be combined both in parallel and series and allow for relatively easy system sizing. The system is intended to be a standalone system that may also be adapted for other applications that involve adsorption. This paper describes the design and potential operating parameters and configurations of the Adsorption Water Recovery System.

trash↗

The Anisotropic Adsorption of De Novo Allosteric Two‐Component Protein Fibers on Mica Surfaces

Protein adsorption at solid–liquid interfaces underlies many biomedical and materials applications, yet the mechanisms governing adsorption of proteins and their assemblies remain poorly understood. Here we investigate de novo–designed proteins that self-assemble into three fibrillar morphologies — small (S), large (L), and helical (H)—on muscovite mica. S-fibers are metastable, forming first but diminishing as L- and H-fibers develop and deposit. Adsorption of both fibers and monomers depends on fiber morphology and solvent environment, which is modulated by the substrate. The anisotropic surface features of the fiber types—long axis of S- and L-fibers and helical grooves of H-fibers—correlate with specific crystallographic directions on mica (001). S- and L-fibers align along the unique lattice axis, while the substrate-facing groove of H-fibers preferentially aligns along the remaining symmetry-related directions. Increasing potassium chloride (KCl) concentrations to molar levels alters adsorption, decreasing monomer coverage relative to fibers. These observations, interpreted through the effect of interfacial interface, indicate that ion-mediated modulation of hydration layers governs electrostatic interactions and alignment. This study reveals how coupling between protein topography, substrate crystallography, and hydration structure dictates selective adsorption and orientation of protein assemblies, offering insights for rational biomolecular material design.

AFM↗

Monte Carlo simulations for water adsorption in porous materials: Best practices and new insights

Technologies based on water adsorption such as water harvesting from air have tremendous potential in mitigating important global crises such as water scarcity. An important challenge to the deployment of such technologies is finding optimal adsorbent materials. Given the large materials space of available adsorbents, large-scale computational screening can be extremely helpful for this task. This work explores the methods and details associated with such screening procedures and recommends best practices. We also shed light on the limitations of traditionally used and inexpensive to compute prescreening approaches involving geometric and energetic features to predict water adsorption behavior of porous materials. Such approaches can provide general trends to predict adsorption behavior but may lead to the overlook of potentially important structures due to the complex nature of water adsorption. Finally, this study offers insights for future water adsorption simulations to facilitate the development of optimal water adsorbents.

42 ENGINEERING↗

Response surface methodology guided adsorption and recovery of free fatty acids from oil using resin

The presence of free fatty acids interferes with the conversion of plant oils to biodiesel. In this work, four strong and weak base resins were evaluated for the removal of free fatty acids (FFA) from oil. Amberlite FPA 51 showed the highest adsorption capacity of FFA. A resin concentration above 3% could enable a higher percentage FFA adsorption. The adsorption process fitted a pseudo-first-order kinetic model and achieved equilibrium in approximately 8 h. A full factorial design was used to optimize the resin and FFA concentrations at a fixed temperature (40°C). A ratio of resin to fatty acid concentrations above 1.875 was sufficient for 70% adsorption and the amount adsorbed continued to increase with further added resin. A two-step washing of resin using hexane and ethanol recovered approximately 67.55%±4.05% of the initially added fatty acid. The resin that was used was regenerated with 5% NaOH and re-used for a minimum of three consecutive cycles. However, the adsorption capacity diminished to 75% of the initial cycle in cycles 2 and 3. Thus, the work presents a resin-based process for deacidification of oil to reduce fatty acid content of oil for biodiesel production.

09 BIOMASS FUELS↗

Adsorption of Zn(II) and Pb(II) Ions from Aqueous Solution Using Chitosan Cross-Linked Formaldehyde Adsorbent to Protect the Environment

Synthesis of chitosan cross-linked formaldehyde was successfully prepared from shrimp chitosan. Characterization of the adsorbent using functional properties such as Fourier transform infrared spectroscopy and scanning electron microscope shows the present of amide and hydroxyl groups at their respective position, also the morphological structure of the adsorbent. Adsorption study of the above adsorbent was carry out for the removal of Zn(II) and Pb(II) from aqueous solution. The effect of cross-linked chitosan dosage, initial concentration, contact time, temperature and pH of the solution for the removal of Zn(II) and Pb(II) were discussed. The optimum dosage required for the removal of Zn(II) and Pb(II) were found to be at 0.4 g at the maximum temperature of 25 °C and the percentage removal were 20.34 and 13.54% respectively. The time required for equilibrium to be reached was 50 min. Effectiveness of the cross-linked adsorbent was observed to increase by increase in contact time. Further studies were also done on isotherms and kinetics of Zn(II) and Pb(II) removal from aqueous solution using chitosan cross-linked formaldehyde. Adsorption Isotherm study conducted from the cross-linked absorbent, shows that the Langmuir plot for the removal of Zn(II) was best fitted with R{sup 2} value of 0.9934, and the adsorption process follows the pseudo second order kinetics with an R{sup 2} value of 0.996. This adsorption process was established to be reversible with an R{sub L} values of zinc (0.8232) and lead (0.8853) respectively. Therefore this implies a successfully reduction in the adsorption of zinc and lead ions from cross-linked formaldehyde solution to protect our environment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Molecular Dynamics Simulation of Pore-Size Effects on Gas Adsorption Kinetics in Zeolites

Strong gas-mineral interactions or slow adsorption kinetics require a molecular-level understanding of both adsorption and diffusion for these interactions to be properly described in transport models. In this combined molecular simulation and experimental study, noble gas adsorption and mobility is investigated in two naturally abundant zeolites whose pores are similar in size (clinoptilolite) and greater than (mordenite) the gas diameters. Simulated adsorption isotherms obtained from grand canonical Monte Carlo simulations indicate that both zeolites can accommodate even the largest gas (Rn). However, gas mobility in clinoptilolite is significantly hindered at pore-limiting window sites, as seen from molecular dynamics simulations in both bulk and slab zeolite models. Further, experimental gas adsorption isotherms for clinoptilolite confirm the presence of a kinetic barrier to Xe uptake, resulting in the unusual property of reverse Kr/Xe selectivity. Finally, a kinetic model is used to fit the simulated gas loading profiles, allowing a comparison of trends in gas diffusivity in the zeolite pores.

74 ATOMIC AND MOLECULAR PHYSICS↗

Enhanced adsorption removal of arsenic from mining wastewater using birnessite under electrochemical redox reactions

Manganese oxides have been extensively investigated for arsenic (As) adsorption from aqueous solution. However, the effect of electrochemical redox reactions on the adsorption performance and underlying mechanism remain elusive. Herein, birnessite was used for electrochemical adsorption of As from mining wastewater at a constant cell voltage, and the effect of cell voltage and the continuous use (without desorption) performance of birnessite electrode were also evaluated. We report that at 1.2 V for 24 h, the concentrations of total As (As(T)) and As(III) in wastewater decreased from 3808.7 to 73.7 μg L -1 and 682.8 to 21.4 μg L -1 , respectively. The As(T) removal ratio increased with increasing cell voltage and reached 98.1% at 1.2 V, which was higher than that at open circuit (84.1%). The Mn 2+ concentration also significantly decreased in wastewater during As adsorption. The high potential of birnessite anode and the generation of H 2 O 2 on cathode facilitated As(III) oxidation, and the electrochemical redox reactions of birnessite contributed to the enhancement of As(T) removal. The application of cell voltage reversal could improve the utilization rate of birnessite electrodes by dissolution-recrystallization during continuous use, and the As(T) removal ratio was increased from 73.5% to 85.1% after five cycles of voltage alteration. The present work indicates that birnessite is a promising absorbent for the electrochemical adsorption of As from real wastewaters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Screening of transition metals for PFAS adsorption: A comparative DFT investigation

Transition metals are promising candidates for catalytic destruction of per- and polyfluoroalkyl substances (PFAS). This study employed density functional theory (DFT) calculations to systematically investigate the adsorption of PFAS, which is a critical step in the catalytic process, onto a group of transition metals, namely Cu, Pd, Pt, and Rh. The investigation considered the influence of different PFAS characteristics, including chain length, functional group (i.e., sulfonic vs. carboxylic), and protonation state (i.e., protonated, anionic, and deprotonated radical) on the adsorption mechanism. Overall, the findings indicated that the adsorption of PFAS on transition metals exhibited thermodynamically favorable energetics, with Rh showing the most favorable adsorption for PFAS. However, the adsorption strength was significantly dependent on the protonation state of PFAS. Cu was the highest electron donor, while Pt was the highest electron acceptor. Results were compared to experimental studies in the literature for qualitative validation.

Adsorption↗

A spectroscopic study of the effects of a microbial siderophore on Pb adsorption to kaolinite

Batch adsorption experiments were combined with X-ray Absorption Spectroscopy (XAS) analysis to determine the mechanism(s) whereby the microbial trihydroxamate siderophore ligand desferrioxamine-B (DFO-B) affects Pb sorption to kaolinite at pH 4, 6, and 7.5 (in 0.1 M NaClO{sub 4}, 22 C; Pb:DFO-B ratio 120:240 {micro}M). In the absence of DFO-B, Pb adsorbs only slightly to kaolinite at pH 4, by a combination of inner- and outer-sphere complexation. Adsorption increases at pH 6, and sorption (adsorption/surface precipitation) further increases at pH 7.5. At pH 4, DFO-B does not bind Pb in solution appreciably, and the Pb adsorption mechanism(s) is unchanged by the presence of DFO-B. At pH 6, DFO-B slightly enhances Pb adsorption, due at least in part to formation of a DFO-B-Pb-kaolinite type A ternary surface complex. At pH 7.5, DFO-B decreases Pb sorption and Pb adsorption is dominated by a DFO-B-Pb-kaolinite type A ternary surface complex. Although XAS and thermodynamic speciation modeling indicate that Pb is bound by multiple DFO-B functional groups in solution at pH 7.5, the DFO-B-Pb-kaolinite surface complex appears to involve only a single hydroxamate group. This study thus demonstrates that the detailed structure of a ternary surface complex cannot necessarily be predicted from the structure of the solution organic-metal complex.

36 MATERIALS SCIENCE↗

Adsorption of terbium (III) on DGA and LN resins: Thermodynamics, isotherms, and kinetics

Two commercially available extraction chromatography (EXC) resins containing N,N,N’,N’-tetra-n-octyldiglycolamide (DGA Resin, Normal, 50 – 100 μm) and Bis(2-ethylhexyl) phosphate (LN Resin, 100 – 150 μm) were used as adsorbents to study fundamental adsorption properties such as thermodynamic values, equilibrium isotherms, and kinetic uptake models for terbium(III) adsorption. Weight distribution ratios (D w ) for terbium on DGA and LN resins were measured using a [ 160 Tb]Tb 3+ radiometric tracer in nitric acid as a function of acidity, temperature, initial analyte concentration, and equilibrium time. The D w values showed increasing binding affinity for DGA resin at high nitric acid concentrations and decreasing binding affinity for LN resins. Thermodynamic studies for DGA and LN resins revealed that the Gibbs free energy (ΔG) increased consistently with temperature. To model equilibrium data, increasingly higher parameter equilibrium isotherm models (Henry (1) < Langmuir, Freundlich (2) < Redlich-Peterson (3) < Fritz-Schluender (4)) were compared on their root mean squared errors (RMSE) and adjusted determination coefficients to determine the most applicable model. In all cases, the empirical four-parameter Fritz-Schluender isotherm demonstrated a superior fit. Similar comparisons for reaction-based kinetic models (Pseudo-first-order < Pseudo-second-order < Pseudo-n-order) revealed that the higher-order PNO model yielded a superior fit of kinetic data for both resins. Furthermore, in some cases, adsorption isotherms and kinetic models could also be modeled by a lower-order model with minimal change in error parameters. Weber-Morris plots revealed that two linear sections are observed for each resin, where the first linear segment is attributed to fast (film diffusion) adsorption of terbium, followed by slower intraparticle diffusion of terbium through the pores as the rate-limiting step. Based on the Weber-Morris plot, both film and intraparticle diffusion are involved in controlling the kinetic rate of adsorption for DGA and LN resins.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

A study of rare earth ion-adsorption clays: The speciation of rare earth elements on kaolinite at basic pH

Synthesized rare earth ion-adsorption clays (La, Ce, Nd, Dy and Y, ~ 400 ppm each) were prepared from kaolinite at various basic pH in open-air conditions. X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and inductively coupled plasma mass spectrometry (ICP-MS) were used to characterize the effect of pH on the adsorption mechanism of rare earth elements (REEs) on kaolinite. The crystal structure of kaolinite by XRD analysis is not altered after REE adsorption, suggesting that REEs are bound to the surface of kaolinite. Elemental analysis by XPS and ICP-MS show that the surface concentration of REEs on kaolinite is pH dependent, and a local maximum of the surface concentration is achieved at pH 10. Three characteristics of the La 3d 5/2 XPS photoemission feature were measured and compared to those of standard La compounds to probe the speciation of REEs, and electrostatically bound hydroxides such as REE(OH) 2 + are identified as the primary species on the surface of kaolinite. Finally, compared to the typical ion-adsorption clays with intrinsic acidic pH, clays synthesized at basic pH exhibit similarly high rare earth ion-exchange efficiency with ammonium sulfate (AS), suggesting that rare earth ion-adsorption clays can exist in both acidic and basic environments.

36 MATERIALS SCIENCE↗

Numerical modeling of ion transport and adsorption in porous media: A pore-scale study for capacitive deionization desalination

In this report a pore-scale model is presented to simulate the dynamic ion transport and adsorption processes in porous electrodes used for capacitive deionization (CDI). The Stokes equation governing water flow is solved using the lattice Boltzmann method and Nernst-Planck equation describing ion transport is solved using the finite volume method. The ion adsorption process is considered at the surface of carbon electrodes. After validation against analytical solutions and published results, the model is used to study the coupled water flow, ion transport and adsorption in both two-dimensional and three-dimensional porous CDI electrodes at the pore scale. The effect of electrode microstructure, electrical potential and flow velocity on the adsorption processes is quantitatively investigated, and the relative importance of various parameters is determined. The presented model can be a powerful numerical tool to quantitatively analyze ion transport and adsorption in porous electrodes, and may provide useful information for the design and optimization of CDI electrodes and operating conditions for desired desalination efficiency, water throughput and cost.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗