Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ACTIVATION ENERGY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

Desorption and sublimation kinetics for fluorinated aluminum nitride surfaces

The adsorption and desorption of halogen and other gaseous species from surfaces is a key fundamental process for both wet chemical and dry plasma etch and clean processes utilized in nanoelectronic fabrication processes. Therefore, to increase the fundamental understanding of these processes with regard to aluminum nitride (AlN) surfaces, temperature programmed desorption (TPD) and x-ray photoelectron spectroscopy (XPS) have been utilized to investigate the desorption kinetics of water (H{sub 2}O), fluorine (F{sub 2}), hydrogen (H{sub 2}), hydrogen fluoride (HF), and other related species from aluminum nitride thin film surfaces treated with an aqueous solution of buffered hydrogen fluoride (BHF) diluted in methanol (CH{sub 3}OH). Pre-TPD XPS measurements of the CH{sub 3}OH:BHF treated AlN surfaces showed the presence of a variety of Al-F, N-F, Al-O, Al-OH, C-H, and C-O surfaces species in addition to Al-N bonding from the AlN thin film. The primary species observed desorbing from these same surfaces during TPD measurements included H{sub 2}, H{sub 2}O, HF, F{sub 2}, and CH{sub 3}OH with some evidence for nitrogen (N{sub 2}) and ammonia (NH{sub 3}) desorption as well. For H{sub 2}O, two desorption peaks with second order kinetics were observed at 195 and 460 °C with activation energies (E{sub d}) of 51 ± 3 and 87 ± 5 kJ/mol, respectively. Desorption of HF similarly exhibited second order kinetics with a peak temperature of 475 °C and E{sub d} of 110 ± 5 kJ/mol. The TPD spectra for F{sub 2} exhibited two peaks at 485 and 585 °C with second order kinetics and E{sub d} of 62 ± 3 and 270 ± 10 kJ/mol, respectively. These values are in excellent agreement with previous E{sub d} measurements for desorption of H{sub 2}O from SiO{sub 2} and AlF{sub x} from AlN surfaces, respectively. The F{sub 2} desorption is therefore attributed to fragmentation of AlF{sub x} species in the mass spectrometer ionizer. H{sub 2} desorption exhibited an additional high temperature peak at 910 °C with E{sub d} = 370 ± 10 kJ/mol that is consistent with both the dehydrogenation of surface AlOH species and H{sub 2} assisted sublimation of AlN. Similarly, N{sub 2} exhibited a similar higher temperature desorption peak with E{sub d} = 535 ± 40 kJ/mol that is consistent with the activation energy for direct sublimation of AlN.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Non-isothermal crystallization kinetics of Fe{sub 2}O{sub 3}–CaO–SiO{sub 2} glass containing nucleation agent P{sub 2}O{sub 5}/TiO{sub 2}

Fe{sub 2}O{sub 3}–CaO–SiO{sub 2} glass ceramics containing nucleation agent P{sub 2}O{sub 5}/TiO{sub 2} were prepared by sol-gel method. The samples were characterized by X-ray diffraction (XRD) and differential scanning calorimetry (DSC). The activation energy and kinetic parameters for crystallization of the samples were calculated by the Johnson-Mehi-Avrami (JMA) model and Augis-Bennett method according to the results of DSC. The results showed that the crystallization mechanism of Fe{sub 2}O{sub 3}–CaO–SiO{sub 2} glass, whose non-isothermal kinetic parameter n = 2.3, was consistent with surface crystallization of the JMA model. The kinetics model function of Fe{sub 2}O{sub 3}–CaO–SiO{sub 2} glass, f(α) = 2.3(1–α)[–ln(1–α)]{sup 0.57}, was also obtained. The addition of nucleation agent P{sub 2}O{sub 5}/TiO{sub 2} could reduce the activation energy, which made the crystal growth modes change from onedimensional to three-dimensional.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of Mn addition on deformation behaviour of 23% Cr low nickel duplex stainless steel

Highlights: • Increasing Mn content obviously affects dynamic softening behaviour of flow curves. • More complete austenite DRX occurred with middle Mn addition of 10.3% at 1 s{sup −1}. • The constitutive equations for different Mn addition alloys are developed. • The values of activation energy and Z parameter are lowest with middle Mn addition. • Different Mn addition processing maps with increasing strain were established. - Abstract: Isothermal compression testing of 23% Cr low nickel duplex stainless steels, with different Mn concentrations, was investigated in the temperature range of 1173–1423 K, the strain rate range of 0.01–10 s{sup −1} and with a height reduction of 70%. Increasing the Mn content from 6.3 to 14.1% affected the deformation dynamic softening behaviour of flow curves at lower temperature and higher strain rate. It was also observed that increasing the deformation stain rate contributed to flow softening, and was caused by dynamic recrystallization (DRX) as a function of Mn addition. Deformation microstructure analysis demonstrated that more complete austenite phase DRX occurred with 10.3% Mn addition than that with 6.3% Mn addition at 1 s{sup −1}, but an excessive Mn content of 14.1% was unfavourable due to the increase of austenite fraction and stacking fault energy enhancement. Increasing the strain rate to 10 s{sup −1} promoted austenite phase DRX at 1323 K with the Mn addition under large strain. Meanwhile, the ferrite phase DRX occurred at 1173 K/1–10 s{sup −1} with 6.3% Mn, and was weakened with higher Mn addition. Compared to the 6.3% and 14.1% Mn, continuous DRX occurred at 1323 K/1 s{sup −1} with 10.3% Mn, due to the larger fraction of high angle misorientations. The values for the activation energy and Zener–Hollomon parameter decreased with Mn addition from 6.3 to 10.3%, and then increased with a higher Mn addition of 14.1%, indicating that a proper content of Mn addition can reduce the thermal deformation resistance and promote DRX. The constitutive equations for different Mn addition alloys were developed using a hyperbolic sine equation. Processing maps with different Mn addition for the strains of 0.3, 0.6 and 1.2 were established. The 10.3% Mn content sample corresponded to the lowest instability region, implying that the workability was improved with the middle Mn addition.

36 MATERIALS SCIENCE↗

Crystal structure, thermal expansion and high-temperature electrical conductivity of A-site deficient La{sub 2−z}Co{sub 1+y}(Mg{sub x}Nb{sub 1−x}){sub 1−y}O{sub 6} double perovskites

New La-deficient double perovskites with P2{sub 1}/n symmetry, La{sub ∼1.90}(Co{sup 2+}{sub 1−x}Mg{sup 2+}{sub x})(Co{sup 3+}{sub 1/3}Nb{sup 5+}{sub 2/3})O{sub 6} with x=0, 0.13 and 0.33, and La{sub 2}(Co{sup 2+}{sub 1/2}Mg{sup 2+}{sub 1/2}) (Co{sup 3+}{sub 1/2}Nb{sup 5+}{sub 1/2})O{sub 6} were prepared by solid state reaction at 1450 °C. Their crystal structures were refined using time-of-flight neutron powder diffraction data. Our results show that certain cations such as Nb{sup 5+}, with very strong B–O bonds in the perovskite structure, can induce A-site vacancies in double perovskites. Upon heating in N{sub 2} gas atmosphere at 1200 °C ∼1% O atom vacancies are formed together with a partial reduction of the Co{sup 3+} content. The average thermal expansion coefficient between 25 and 900 °C of La{sub 1.90}(Co{sup 2+}{sub 2/3}Mg{sup 2+}{sub 1/3})(Co{sup 3+}{sub 1/3}Nb{sup 5+}{sub 2/3})O{sub 6} was determined to be 17.4 ppm K{sup −1}. Four-point electronic conductivity measurements showed that the compounds are semiconductors, with conductivities varying between 3.7·10{sup −2} and 7.7·10{sup −2} S cm{sup −1} at 600 °C and activation energies between 0.77 and 0.81 eV. Partial replacement of La{sup 3+} with Sr{sup 2+} does not lead to any increase of conductivity, while replacement of Mg{sup 2+} with Cu{sup 2+} in La{sub 1.9}CoCu{sub 1/3}Nb{sub 2/3}O{sub 6} and La{sub 1.8}CoCu{sub 1/2}Nb{sub 1/2}O{sub 6} leads to ∼100 times larger conductivities at 600 °C, 0.35 and 1.0 S cm{sup −1}, respectively, and lower activation energies, 0.57 and 0.73 eV, respectively. - Highlights: • Double perovskites, P2{sub 1}/n, La{sub 2−z}(Co{sup 2+}{sub 1−x}Mg{sup 2+}{sub x})(Co{sup 3+}{sub 1/3}Nb{sup 5+}{sub 2/3})O{sub 6} have been synthesized. • Crystal structures have been refined using neutron powder diffraction data. • Strong Nb–O bond and size ordering of Mg{sup 2+}/Co{sup 2+} and Nb{sup 5+}/Co{sup ~3+} leads to La-deficiency. • The compounds are semi conductors (~10{sup −2} S cm{sup −1}) at 600 °C. • Replacement of Mg{sup 2+} with Cu{sup 2+} leads to higher conductivity (~1.0 S cm{sup −1}) at 600 °C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Growth kinetics and electronic properties of unintentionally doped semi-insulating GaN on SiC and high-resistivity GaN on sapphire grown by ammonia molecular-beam epitaxy

Growth of unintentionally doped (UID) semi-insulating GaN on SiC and highly resistive GaN on sapphire using the ammonia molecular-beam epitaxy technique is reported. The semi-insulating UID GaN on SiC shows room temperature (RT) resistivity of 10{sup 11} {Omega} cm and well defined activation energy of 1.0 eV. The balance of compensation of unintentional donors and acceptors is such that the Fermi level is lowered to midgap, and controlled by a 1.0 eV deep level defect, which is thought to be related to the nitrogen antisite N{sub Ga}, similar to the ''EL2'' center (arsenic antisite) in unintentionally doped semi-insulating GaAs. The highly resistive GaN on sapphire shows RT resistivity in range of 10{sup 6}-10{sup 9} {Omega} cm and activation energy varying from 0.25 to 0.9 eV. In this case, the compensation of shallow donors is incomplete, and the Fermi level is controlled by levels shallower than the 1.0 eV deep centers. The growth mechanisms for the resistive UID GaN materials were investigated by experimental studies of the surface kinetics during growth. The required growth regime involves a moderate growth temperature range of 740-780 deg. C, and a high ammonia flux (beam equivalent pressure of 1x10{sup -4} Torr), which ensures supersaturated coverage of surface adsorption sites with NH{sub x} radicals. Such highly nitrogen rich growth conditions lead to two-dimensional layer by layer growth and reduced oxygen incorporation.

36 MATERIALS SCIENCE↗

Microstructure evolution of Ag–8Au–3Pd alloy wire during electromigration

As the continuous shrinkage of the interconnect line width in microelectronics devices, there is a growing concern about the electromigration (EM) failure of bonding wire. In addition, an innovative Ag–8Au–3Pd alloy wire has shown promise as an economical substitute for gold wire interconnects due to the cost pressure of gold in the last decade. In present study of the Ag–8Au–3Pd alloy wire, the surface diffusion occupied the dominant position during EM failure, and the activation energy was found to be 0.61 eV. In order to reveal the failure mechanism, the cross-sections of the Ag–8Au–3Pd alloy wire during EM were prepared by focused ion beam (FIB) micro-machining for electron backscatter diffraction (EBSD) analysis. The microstructure evolution of the Ag–8Au–3Pd alloy wire was characterized by the grain size and grain boundary. As a result, the EM failure originates in the atom transportation, which causes grain size increasing and atom diffusion on the wire surface. - Highlights: • The activation energy of Ag–8Au–3Pd alloy wire was obtained as 0.61 eV. • During EM, the silver atoms diffused from negative to the positive terminal on the wire surface. • The microstructure (grain size and grain boundary) was characterized by FIB-EBSD. • During EM, the atom transportation was found to cause grain size growth and atom diffusion on the wire surface.

36 MATERIALS SCIENCE↗

Development of nano-structured duplex and ferritic stainless steels by pulverisette planetary milling followed by pressureless sintering

Nano-structured duplex and ferritic stainless steel powders are prepared by planetary milling of elemental Fe, Cr and Ni powder for 40 h and then consolidated by conventional pressureless sintering. The progress of milling and the continuous refinement of stainless steel powders have been confirmed by means of X-ray diffraction and scanning electron microscopy. Activation energy for the formation of duplex and ferritic stainless steels is calculated by Kissinger method using differential scanning calorimetry and is found to be 159.24 and 90.17 KJ/mol respectively. Both duplex and ferritic stainless steel powders are consolidated at 1000, 1200 and 1400 °C in argon atmosphere to study microstructure, density and hardness. Maximum sintered density of 90% and Vickers microhardness of 550 HV are achieved for duplex stainless steel sintered at 1400 °C for 1 h. Similarly, 92% sintered density and 263 HV microhardness are achieved for ferritic stainless steel sintered at 1400 °C. - Highlights: • Synthesized duplex and ferritic stainless steels by pulverisette planetary milling • Calculated activation energy for the formation of duplex and ferritic stainless steels • Studied the effect of sintering temperature on density, hardness and microstructure • Duplex stainless steel exhibits 90% sintered density and microhardness of 550 HV. • Ferritic stainless steel shows 92% sintered density and 263 HV microhardness.

36 MATERIALS SCIENCE↗

The U{sup 5+} compound Ba{sub 9}Ag{sub 10}U{sub 4}S{sub 24}: Synthesis, structure, and electronic properties

Black crystals of Ba{sub 9}Ag{sub 10}U{sub 4}S{sub 24} have been made by direct combination of BaS, Ag, U, and S at 1273 K. This compound crystallizes in a new structure type in the space group C{sub 4v}{sup 10}−I4cm of the tetragonal system with four formula units in a cell with lattice constants a=13.9189(6) Å and c=23.7641(11) Å (V=4604(5) Å{sup 3}). Multiphoton Luminescence Spectroscopy measurements are consistent with the noncentrosymmetric nature of the structure. In the structure each U atom is octahedrally coordinated by six S atoms, whereas three of the five crystallographically independent Ag atoms are tetrahedrally coordinated to four S atoms, another has a seesaw coordination to four S atoms, and the last has a triangular coordination to three S atoms. The overall structure consists of the three-dimensional stacking of the US{sub 6}, AgS{sub 4}, and AgS{sub 3} polyhedra to leave channels in which Ba atoms reside. Based on the values of the U–S interatomic distances, the compound Ba{sub 9}Ag{sub 10}U{sub 4}S{sub 24} contains U{sup 5+} and charge balance is achieved with the formal oxidation states of 9 Ba{sup 2+}, 10 Ag{sup 1+}, 4 U{sup 5+} and 24 S{sup 2−}. DFT calculations predict an antiferromagnetic ground state and a band gap of 2.1 eV. Resistivity measurements indicate that the compound is a semiconductor with a complex activation mechanism and activation energies ranging from 0.03(1) eV to 0.08(1) eV. - Graphical abstract: General view of the Ba{sub 9}Ag{sub 10}U{sub 4}S{sub 24} structure. - Highlights: • Black crystals of Ba{sub 9}Ag{sub 10}U{sub 4}S{sub 24} have been made by direct combination of BaS, Ag, U, and S at 1273 K. • Ba{sub 9}Ag{sub 10}U{sub 4}S{sub 24} contains U{sup 5+} and charge balance is achieved with 9 Ba{sup 2+}, 10 Ag{sup 1+}, 4 U{sup 5+}, and 24 S{sup 2−}. • DFT calculations predict an antiferromagnetic ground state and a band gap of 2.1 eV. • The compound is a semiconductor with activation energies ranging from 0.03(1) eV to 0.08(1) eV.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Spark Plasma Sintering of high-density fine-grained Y2.5Nd0.5Al5O12+SiC composite ceramics

Highlights: • YAG + (10, 20) wt.% α-SiC high-density ceramics obtained by SPS. • YAG + α-SiC ceramics have a more fine-grained structure than pure garnet. • The optimal sintering temperature of YAG + SiC ceramics is lower than that of garnet. • Introduction of α-SiC particles creates internal stress fields in garnet. • Introduction of α-SiC particles results in lower sintering activation energy of garnet. - Abstract: Spark Plasma Sintering (SPS) has been used to produce samples of fine-grained composites Y{sub 2.5}Nd{sub 0.5}Al{sub 5}O{sub 12} + x wt.% α-SiC (x = 1020) with ∼98–99% density. The microstructure of the composites has been studied, as well as the impact of α-SiC particles on the mechanical properties and kinetics of composite sintering. The introduction of the α-SiC part has been demonstrated to form a more fine-grained structure and under the given SPS conditions change the sintering mechanism in ceramics. The study has also demonstrated that introduction of α-SiC particles into garnet results in formation of internal stress fields, which, in turn, leads to a decrease in the activation energy of sintering of fine-grained composites at high temperatures.

36 MATERIALS SCIENCE↗

Hydrothermal synthesis and electrical properties of NaNbO{sub 3}

Graphical abstract: Display Omitted Highlights: ► Crystalline rhombohedral sodium niobate (r-NaNbO{sub 3}) were synthesized. ► Conductivity goes from 5.5 × 10{sup −6} Ω{sup −1} cm{sup −1} at 280 °C to 7.61 × 10{sup −4} Ω{sup −1} cm{sup −1} at 780 °C. ► Activation energies are in the order of 0.893, 0.507, 0.819 and 0.105 eV. -- Abstract: Triangular prism-like of crystalline rhombohedral sodium niobate (r-NaNbO{sub 3}) were prepared from Nb{sub 2}O{sub 5} in the presence of NaOH via a hydrothermal method at 180 °C for 6 h. Techniques X-ray diffraction, scanning electron microscopy, Fourier transform infrared, Raman and impedance spectroscopy have been used to characterize the structure, morphology, composition and electrical properties of the material. Electrical conductivity measurements showed that the as synthesized r-NaNbO{sub 3} triangular prism has a conductivity value which goes from 5.5 × 10{sup −6} Ω{sup −1} cm{sup −1} at 280 °C to 7.61 × 10{sup −4} Ω{sup −1} cm{sup −1} at 780 °C. The Arrhenius diagram is not linear; it presents four regions of conductivity. The corresponding activation energies are, respectively, in the order of 0.893, 0.507, 0.819 and 0.105 eV, deduced from the Arrhenius relation.

36 MATERIALS SCIENCE↗

Rietveld refinement and dielectric relaxation of a new rare earth based double perovskite oxide: BaPrCoNbO{sub 6}

A new rare earth based double perovskite oxide barium praseodymium cobalt niobate, BaPrCoNbO{sub 6} (BPCN) is synthesized by solid-state reaction technique. Rietveld analysis of X-ray diffraction (XRD) data shows that the compound crystallizes in a perovskite like tetragonal structure which belongs to the I4/mmm space group with lattice parameters a=b=5.6828(9) Å, c=8.063(2) Å. Structural analysis reveals 1:1 ordered arrangement for the Co{sup 2+} and Nb{sup 5+} cations over the six-coordinate B-sites of BPCN. The superlattice line (1 0 1) at 2θ=19.10° arising from the alternate ordering of Co{sup 2+} and Nb{sup 5+} sites is observed in the XRD pattern which confirms the presence of cation ordering in BPCN. Fourier transform infrared spectrum shows two phonon modes of the sample due to the antisymmetric NbO{sub 6} stretching vibration. The relaxation dynamics of the conductive process in BPCN is investigated in the temperature range 303 to 503 K and in the frequency range 100 Hz to 1 MHz using impedance spectroscopy. The relaxation mechanism of the sample in the framework of electric modulus formalism is modeled by Davidson–Cole model (DCM). The values of α (distribution of relaxation time) for the DCM varies from 0.1 to 0.3 which suggests the asymmetric distribution of relaxation time for BPCN. The activation energy of the sample, calculated from both conductivity and modulus spectra, are found to be almost the same ∼0.4 eV, which indicates that the conduction mechanism for BPCN is polaron hopping. The scaling behaviour of the imaginary part of electric modulus suggests that the relaxation follows the same mechanism at various temperatures. - Graphical abstract: Rietveld refinement plot for BPCN. Inset shows the schematic presentation of the BPCN tetragonal unit cell. The Co{sup 2+} atoms are located at the centers of the CoO{sub 6} (blue) octahedra. The Nb{sup 5+} atoms are located at the centers of the NbO{sub 6} (green) octahedra. Display Omitted - Highlights: • BaPrCoNbO{sub 6} is synthesized for the first time. • Rietveld refinement of XRD data confirms tetragonal phase. • XRD confirms the presence of cation ordering in BaPrCoNbO{sub 6}. • The activation energy is ∼0.4 eV. • The conduction mechanism for BPCN is due to polaron hopping.

36 MATERIALS SCIENCE↗

Time temperature transformation diagram for secondary crystal products of Co-based Co-Fe-B-Si-Nb-Mn soft magnetic nanocomposite

Secondary crystallization is the subject of much investigation in magnetic amorphous and nanocomposites (MANCs) as it limits the long term and thermal stability of their operation in device applications, including power electronics, sensors, and electric motors. Secondary crystal products [Blazquez et al., Philos. Mag. Lett. 82(7), 409–417 (2002); Ohodnicki et al., Phys. Rev. B 78, 144414 (2008); Willard et al., Metall. Mater. Trans. A 38, 725 (2007)], nanostructure and crystallization kinetics [Hsiao et al., IEEE Trans. Magn. 38(5), 3039 (2002); McHenry et al., Scr. Mater. 48(7), 881 (2003)], and onset temperatures and activation energies [Ohodnicki et al., Acta. Mater. 57, 87 (2009); Long et al., J. Appl. Phys. 101, 09N114 (2007)] at constant heating have been reported for similar alloys. However, a time-temperature-transformation (TTT) diagram for isothermal crystallization, more typical of application environments, has not been reported in literature. Here, a TTT diagram for the Co based, Co-Fe-Si-Nb-B-Mn MANC system is presented, along with a method for determining such. The method accounts for the presence of primary crystal phases and yields crystal fraction of secondary phase(s) by using a novel four stage heating profile. The diagram, affirmed by Kissinger activation energy analysis, reports thermal stability of the MANC for millennia at conventional device operating temperatures, and stability limits less than a minute at elevated temperatures. Both extremes are necessary to be able to avoid secondary crystalline products and establish operating limits for this mechanically attractive, high induction soft magnetic nanocomposite.

36 MATERIALS SCIENCE↗

Dielectric relaxation of NdMnO{sub 3} nanoparticles

Graphical abstract: (a) TEM image of particle distribution of NMO. (b) HRTEM image of a single NMO particle under 4,000,000× magnification. (c) SAED pattern of a single NMO nanoparticle. - Highlights: • NdMnO{sub 3} nanoparticles are synthesized by sol–gel process. • TEM micrograph shows a granular characteristic with an average particle size of ∼50 nm. • HRTEM is consistent with the spacing between the (2 0 0) planes of the orthorhombic NdMnO{sub 3}. • Band gap is found to be 4.4 eV. • Cole–Cole model has been used to explain the dielectric relaxation in the material. • The activation energy of the material is found to be ∼0.43 eV. - Abstract: The neodymium manganate (NdMnO{sub 3}) nanoparticles are synthesized by the sol–gel process. The phase formation and particle size of the sample are determined by X-ray diffraction analysis and transmission electron microscopy. The band gap of the material is obtained by UV–visible absorption spectroscopy using Tauc relation. Dielectric properties of the sample have been investigated in the frequency range from 42 Hz to 1 MHz and in the temperature range from 303 K to 573 K. The dielectric relaxation peaks are observed in the frequency dependent dielectric loss spectra. The Cole–Cole model is used to explain the dielectric relaxation mechanism of the material. The complex impedance plane plot confirms the existence of both the grain and grain-boundary contribution to the relaxation. The temperature dependence of both grain and grain-boundary resistances follow the Arrhenius law with the activation energy of 0.427 and 0.431 eV respectively. The frequency-dependent conductivity spectra follow the power law.

36 MATERIALS SCIENCE↗

Magnetic Field Dependence of Magnetotransport Properties of MgB{sub 2}/CrO{sub 2} Bilayer Thin Films

In this work, we comparatively investigated two MgB{sub 2} films: one (F1) was typically fabricated using the PLD method, while the other (F2) was fabricated using the same method but on top of a 100-nm-thick CrO{sub 2} layer. Both films had a thickness of 300 nm and were annealed ex situ at 700 °C for 30 min before being investigated under an external magnetic field of up to ± 7 T. The activation energy (U{sub o}), upper critical field (H{sub C2}), irreversibility field (H{sub irr}), magnetoresistance (MR), and I-V characteristics for the two films were studied in detail, and the results were compared with theoretical models. XRD analysis showed that both films are c-axis-oriented, while the RRR values for the films were found to be 1.6 and 1.89, respectively. Experimental data showed a broadening of the R-T transitions for an increasing magnetic field, with such broadening observed to be wider for F2 due to surface superconductivity. The activation energy under magnetic fields ranging from 0 to 7 T was calculated using our data and compared with a theoretical model. In both films, U{sub o} followed a parabolic curve but was higher for F2 up to 6 T before sharply decreasing, while it continued to follow the same trend for F1 up to 7 T. The theoretical model was in good agreement with F1 for the full span of magnetic fields used. H{sub C2} and H{sub irr} were estimated and fitted using Ginzburg–Landau theory, but although the fitting was very good for F1, some modification in fitting parameters was required to obtain the same fitting for F2. Magnetoresistance and I-V characteristics confirm that the CrO{sub 2} layer in F2 leads to faster damage to the superconductivity property for high magnetic fields and temperatures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Alternating-current conductivity and dielectric relaxation of bulk iodoargentate

Graphical abstract: The electric modulus shows single dielectric relaxation process in the measured frequency range. - Highlights: • The conduction mechanism is described by quantum mechanical tunneling model. • The applications of dielectric modulus give a simple method for evaluating the activation energy of the dielectric relaxation. • The [Ag{sub 2}I{sub 4}]{sup 2−}1-D chain and [Cu(en){sub 2}]{sup 2+} cation column form the layered stacks by hydrogen bond interactions. - Abstract: An inorganic-organic hybrid compound Cu(en){sub 2}Ag{sub 2}I{sub 4} (en = ethylenediamine) (1) was synthesized and single crystal structurally characterized. Along the [001] direction, the inorganic parts form an infinite 1-D chain and [Cu(en){sub 2}]{sup 2+} cations are separated by inorganic chain. The electrical conductivity and dielectric properties of 1 have been investigated over wide ranges of frequency. The alternating-current conductivities have been fitted to the Almond–West type power law expression with use of a single value of S. It is found that S values for 1 are nearly temperature-independent, which indicates that the conduction mechanism could be quantum mechanical tunneling (QMT) model. The dielectric loss and electric modulus show single dielectric relaxation process. The activation energy obtained from temperature-dependent electric modulus compare with the calculated from the dc conductivity plots.

36 MATERIALS SCIENCE↗

Characterization of carrier states in CuWO₄ thin-films at elevated temperatures using conductometric analysis

CuWO₄ thin-films were deposited by pulsed laser deposition onto an insulating substrate. The temperature dependence of the electronic conductivity of CuWO₄ thin-films was determined over 100–500 °C temperature range in a synthetic air atmosphere. Additionally, variations of conductivity at 300 °C and 500 °C have been measured for oxygen partial pressures (0.1 atm<p(O₂)<0.9 atm) in nitrogen. The apparent activation energy ΔE{sub a} for the electrical conduction has been estimated. The study of the temperature effect on the electron transport properties of CuWO₄ thin-films reveals the operation of two temperature-dependent oxygen states. The effect of varying oxygen concentration on the electronic properties is discussed in detail. The electrochemical nature of the operating oxygen states for 100–500 °C temperature range is deduced using a physicochemical model that relates electronic conductivity with oxygen partial pressure and temperature. - Graphical abstract: Formation of oxygen states in n-type semiconducting metal-oxides and its effect on the surface electrochemical potential and electron transport. Highlights: • The study of surface species in CuWO₄ thin-films was carried using conductometry. • The determination of the apparent activation energy of conduction with temperature is outlined. • Temperature and O₂ concentration effects on the oxygen states was established. • For the ranges of temperature studied, the identified operating oxygen states were O₂⁻ and O⁻.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Decrease of the surface resistance in superconducting niobium resonator cavities by the microwave field

Measurements of the quality factor, Q, of Nb superconducting microwave resonators often show that Q increases by ≃10%–30% with increasing radio-frequency (rf) field, H, up to ∼15–20 mT. Recent high temperature heat treatments can amplify this rf field-induced increase of Q up to ≃50%–100% and extend it to much higher fields ≃100 mT, but the mechanisms of the enhancement of Q(H) remain unclear. Here, we suggest a method to reveal these mechanisms by measuring temperature dependencies of Q at different rf field amplitudes. We show that the increase of Q(H) does not come from a field dependent quasi-particles activation energy or residual resistance, but rather results from the smearing of the density of state by the rf field.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural and electrical properties of Ce{sub 0.75}(Gd{sub 0.95−x}Sr{sub x}Ca{sub 0.05}){sub 0.25}O{sub 2−δ} thick film electrolyte

Graphical abstract: - Highlights: • Effects of Sr doping on electrical properties and structure were investigated. • The samples have higher conductivity and low activation energy. • Cause of increase oxygen vacancy concentration in the grain boundary. - Abstract: The effects of Sr doping on the electrical properties of Ce{sub 0.75}(Gd{sub 0.95−x}Sr{sub x}Ca{sub 0.05}){sub 0.25}O{sub 2−δ} (x = 0, 0.01, 0.02, 0.03, 0.04, 0.05 mol%) electrolytes thick films were investigated. The samples sintered at 1400 °C for 8 h. X-ray diffraction (XRD) showed typical XRD patterns of a cubic fluorite structure, and the ionic conductivity was examined by AC impedance spectroscopy. From the experimental results, it was observed that Ce{sub 0.75}(Gd{sub 0.95−x}Sr{sub x}Ca{sub 0.05}){sub 0.25}O{sub 2−δ} (x = 0.04 mol%) electrolytes thick film have higher conductivity and minimum activation energy at 600 °C. This is explained in terms of the increased in the oxygen vacancy concentration at the grain boundary.

36 MATERIALS SCIENCE↗