Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ACOUSTICS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Bat Acoustic Survey Data Collected June 2024 in and near Self Sufficiency Parcel-2 (SSP2) on the Oak Ridge Reservation (ORR)

The US Department of Energy (DOE) Oak Ridge Reservation (ORR) is located in Anderson and Roane Counties, Tennessee. A portion of the ORR, known as Self-Sufficiency Parcel 2 (SSP2) is planned for transfer for private use. The SSP2 Site is approximately 670 acres (Figure 1-1), although the current plan is to only clear and develop a portion of this acreage. Any inquiries about the land transfer and future development should be directed to DOE Oak Ridge Environmental Management, as this is beyond the scope of the Natural Resources Management Team (NRMT). NRMT records bat data for the entire ORR, including acoustic monitoring, mist netting and cave surveys. A few surveys have previously been conducted for small land transfers adjacent to SSP2 (See Appendix A), but not for the entire SSP2 area. Since bats have a large range, it was decided that collecting data while SSP2 was still accessible would be beneficial for the NRMT dataset. Acoustic data was therefore collected within and near SSP2 during the summer of 2024. This write-up is not a Biological Assessment (BA). However, the data and information provided can be used during the creation of a BA and consultations with US Fish and Wildlife Service (USFWS) in order to comply with federal directives of the Endangered Species Act of 1973 (16 U. S. C. 153 et seq.). The SSP2 site was surveyed during summer roosting/maternity season of 2024 using ultrasonic acoustic monitors to record calls from all bat species whose home ranges include the ORR. Special note was taken for presence of Federally listed Endangered and Threatened (T&E) bat species, as well as bat species which are Proposed for Federal listing, Candidate for federal listing, and state listed. Summer roosting season, from May 15 to August 15, is crucial to forest-dwelling T&E bat species for rearing young and foraging. Results of these surveys indicate the presence of three Federally listed bat species: Gray bat (Myotis grisescens--Endangered), Indiana bat (Myotis sodalis--Endangered), and Northern long-eared bat (Myotis septentrionalis--Endangered). Two additional bat species were present on the SSP2 Site: Tricolored bat (Perimyotis subflavus--Proposed for Federal listing) and Little brown bat (Myotis lucifugus—Candidate for Federal listing).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Evaluation of Howard A. Hanson Dam Juvenile Fish Passage and Survival Study: Downstream Passage and Survival (Acoustic Telemetry) (Task Final Report)

The Downstream Passage and Survival (Acoustic Telemetry) task was one of several tasks for the Evaluation of Howard A. Hanson Dam (HAHD) Juvenile Fish Passage and Survival study. For this task, a juvenile fish passage and survival study was conducted at HAHD from March 10, 2024 through June 27, 2024 for arrays in the HAHD Reservoir and Green River, and through July 9, 2024 for the arrays in the Duwamish River. Fish releases occurred over four times from March through May. Active tag (acoustic telemetry) technology was used to provide biological baseline information for the passage and survival of juvenile Puget Sound (PS) Chinook salmon (Oncorhynchus tshawytscha). Results will be used by biologists, engineers, resource managers, and regional decision-makers to inform the engineering design of the new fish passage facility (FPF) at HAHD. However, hatchery sub-yearling PS Chinook salmon of the appropriate size for tag implantation during the study period (> 95 mm in fork length, Geist et al. 2018) were unavailable. Therefore, yearling Coho salmon (O. kisutch) were used as a surrogate species for this acoustic telemetry study.

13 HYDRO ENERGY↗
DOE OSTI2019

Integrating Hybrid-Clustering and Localized Regression for Time Synchronization of a Hierarchical Underwater Acoustic Sensor Array

Time synchronization is a critical requirement for the application of underwater acoustic sensor network (UWSN). Although a number of time synchronization protocols have been proposed for UWSN, none of them can be directly applied to autonomous acoustic receivers due to lack of hardware platform to communicate with each other. In this paper, we propose a machine learning-based time synchronization framework for autonomous receiver arrays, using the Juvenile Salmon Acoustic Telemetry System as a case study. The proposed framework consists of array partition and time synchronization. Using detections of receiver attached beacons as input, this framework synchronizes all receiver clocks to a root receiver clock. The framework has been successfully used in a field study at Trevallyn Dam forebay in Tasmania, Australia.

Fu, Tao↗
DOE OSTI2018

Modeling Premixed Flame Response to Transverse Acoustic Modes

During a thermoacoustic instability, the flame is disturbed by both the “direct” acoustic waves, as well as the “indirect” vortical structures excited by the acoustic disturbances. For lower frequency axial modes, there is significant evidence that the “indirect” vortical disturbances are much larger in magnitude and dominate the heat release excitation. This paper provides an analysis of the “direct” velocity coupled flame response to transverse modes; it was motivated by phenomenological arguments by prior researchers showing that these modes always have positive Rayleigh indices, because of the nature of the phasing between pressure, velocity, and unsteady heat release. This paper presents a modeling framework using the G-equation that captures the direct acoustic excitation of the flame with the effects of convective transport of wrinkles, flame displacement and flame propagation. Calculations for the Rayleigh index associated with direct excitation are shown for the first set of purely radial (0, m) and mixed radial-tangential (l, m) modes. Consistent with the results from prior phenomenological arguments, these results show that the Rayleigh index is always greater than zero for some modes – namely (0,1), (1,2) and (2,1), but others have zones of both positive and negative Rayleigh index, such as (1,1). The results also showed that the Rayleigh index decreases considerably much faster with increases in the azimuthal mode number than the radial mode number. This indicates a general tendency for flames to be relatively less unstable in higher azimuthal modes than in higher radial modes.

Acharya, Vishal S.↗
DOE OSTI2019

Premixed Flame Response to High-Frequency Transverse Acoustic Modes: Mean Flame Asymmetry Effects

This paper describes work to understand the direct response of flames to transverse acoustic velocity disturbances. Prior work by Sattelmayer’s group and our group have shown that certain transverse acoustic modes are intrinsically unstable- i.e., they are unstable for all flame configuration parameters. This behavior is quite different from axial instabilities, which show instabilities in “islands” for different flame parameters, some being stable and others unstable. This prior work was performed for axisymmetric flames that were located in the center of the round duct. A key effect of these assumptions is that purely azimuthal velocity disturbances, which dominate the kinetic energy of transverse acoustic modes, do not introduce any flame wrinkling. If the axisymmetric flames are not centered in the duct, then both the radial and azimuthal component of the modal disturbance influences the flame. This effect was explored by the authors in earlier work, showing that such flame offsets have important impacts on stability. In this paper, we evaluate a second mechanism through which the azimuthal motions can influence the flame - mean flame non-axisymmetry effects. Similar to offsets, we show that mean flame asymmetries had very important effects on thermoacoustic stability. For axial, purely-radial modes which are intrinsically unstable when the axisymmetric flame is centered in the duct, can be destabilized.

Acharya, Vishal S.↗
DOE OSTI2020

Theoretical Optimization of Trapped-Bubble-Based Acoustic Metamaterial Performance

Acoustic metamaterials have proven to be a versatile tool for the precise control and manipulation of sound waves. One of the promising designs of acoustic metamaterials employ the arrays of bubbles and find applications for soundproofing, blast mitigation, and many others. An obvious advantage of bubble-based metamaterials is their ability to be relatively thin while absorbing low-frequency sound waves. The vast majority of theories developed to predict resonant behavior of bubble-based metamaterials capitalize on Minnaert frequency. Here, we propose a novel theoretical approach to characterize bubble-based metamaterials that are based on our previous findings for a single bubble trapped in circular cavity modeled as a thin clamped plate. We obtain analytical expressions for resonant frequencies of bubble metascreens using self-consistent approximation. Two geometry factors, distance between bubble centers and distance between bubble center and interface of acoustic impedance change, are taken into account. We demonstrate the existence of multiple bandgaps and possibility of switching between them via adjustment of geometry parameters and reflector properties.

Gritsenko, Dmitry (ORCID:0000000248181512)↗
DOE OSTI2020

Applying Two Active Acoustic Technologies to Document Presence of Large Marine Animal Targets at a Marine Renewable Energy Site

Coastal regions are highly used by humans. The growing marine renewable energy (MRE) industry will add to existing anthropogenic pressures in these regions. Regulatory bodies require animal risk assessment before new industrial activities can progress, and MRE is no exception. Preliminary data of marine mammal use of an MRE device deployment location could be informative to permitting. A combination of downlooking hydroacoustics using an echosounder and acoustic camera (imaging sonar) was used to provide a number of large targets (proxy for large fish and marine mammals) in an area of interest for MRE tidal turbine deployment in Western Passage, Maine, USA. Data were collected in May, June, August, and September of 2010 and 2011. Of the nine large targets confirmed to be animals, eight were porpoises and one was a shark. Few large targets were observed in May and June, with the majority (90%) being present in August and September of both years. The most large targets were observed when tidal current speed was less than 1 m·s−1. These data provide a preliminary assessment of large targets in a single location over sixteen 24-h surveys. The aforementioned methodology could be used for future pre- and post-installation assessments at MRE device deployment locations. Their use in concert with visual and passive acoustic monitoring can provide water depth usage by marine mammals, which is a metric that is difficult to assess with passive acoustic and visual techniques.

Staines, Garrett↗
DOE OSTI2023

Acoustic and Thermoacoustic Jet Propulsion

This manuscript bridges the fields of jet propulsion, synthetic jets and thermoacoustic engines. We introduce the case that synthetic jets in air can be considered a consistent approach for propulsion systems. To date, studies on synthetic jet propulsion have been scattered and rather subsidiary. Furthermore, investigating the perspective of propulsion can provide new insights into the field of synthetic jets and the physics of propulsion. In this work, synthetic jet propulsion in air is demonstrated and studied for acoustic and thermoacoustic cases. We developed synthetic jet systems and characterized the resulting propulsion regarding several relevant parameters such as geometric factors and the frequency and power of acoustic jets electromechanically and thermally produced. We demonstrated the 10.4-mN and 2.7-mN thrust in the acoustic and thermoacoustic modes, respectively, using compact tabletop assemblies. The physical mechanism of the jets has been modeled, simulated, verified with Schlieren imaging and laid in the perspective of adherent literature. Similarities and differences regarding traditional jet propulsion systems are discussed. Synthetic jet propulsion in air using a thermal cycle is experimentally demonstrated for the first time.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2017

Assessing the accuracy of microwave radiometers and radio acoustic sounding systems for wind energy applications

To assess current remote-sensing capabilities for wind energy applications, a remote-sensing system evaluation study, called XPIA (eXperimental Planetary boundary layer Instrument Assessment), was held in the spring of 2015 at NOAA's Boulder Atmospheric Observatory (BAO) facility. Several remote-sensing platforms were evaluated to determine their suitability for the verification and validation processes used to test the accuracy of numerical weather prediction models. The evaluation of these platforms was performed with respect to well-defined reference systems: the BAO's 300 m tower equipped at six levels (50, 100, 150, 200, 250, and 300 m) with 12 sonic anemometers and six temperature ( T ) and relative humidity (RH) sensors; and approximately 60 radiosonde launches. In this study we first employ these reference measurements to validate temperature profiles retrieved by two co-located microwave radiometers (MWRs) as well as virtual temperature ( T v ) measured by co-located wind profiling radars equipped with radio acoustic sounding systems (RASSs). Results indicate a mean absolute error (MAE) in the temperature retrieved by the microwave radiometers below 1.5 K in the lowest 5?km of the atmosphere and a mean absolute error in the virtual temperature measured by the radio acoustic sounding systems below 0.8 K in the layer of the atmosphere covered by these measurements (up to approximately 1.6-2 km). We also investigated the benefit of the vertical velocity correction applied to the speed of sound before computing the virtual temperature by the radio acoustic sounding systems. We find that using this correction frequently increases the RASS error, and that it should not be routinely applied to all data. Water vapor density (WVD) profiles measured by the MWRs were also compared with similar measurements from the soundings, showing the capability of MWRs to follow the vertical profile measured by the sounding and finding a mean absolute error below 0.5 g m -3 in the lowest 5 km of the atmosphere. However, the relative humidity profiles measured by the microwave radiometer lack the high-resolution details available from radiosonde profiles. Furthermore, an encouraging and significant finding of this study was that the coefficient of determination between the lapse rate measured by the microwave radiometer and the tower measurements over the tower levels between 50 and 300 m ranged from 0.76 to 0.91, proving that these remote-sensing instruments can provide accurate information on atmospheric stability conditions in the lower boundary layer.

17 WIND ENERGY↗
DOE OSTI2013

Lateral acoustic wave resonator comprising a suspended membrane of low damping resonator material

A very high-Q, low insertion loss resonator can be achieved by storing many overtone cycles of a lateral acoustic wave (i.e., Lamb wave) in a lithographically defined suspended membrane comprising a low damping resonator material, such as silicon carbide. The high-Q resonator can sets up a Fabry-Perot cavity in a low-damping resonator material using high-reflectivity acoustic end mirrors, which can comprise phononic crystals. The lateral overtone acoustic wave resonator can be electrically transduced by piezoelectric couplers. The resonator Q can be increased without increasing the impedance or insertion loss by storing many cycles or wavelengths in the high-Q resonator material, with much lower damping than the piezoelectric transducer material.

47 OTHER INSTRUMENTATION↗
DOE OSTI2016

Synthesis of soluble conducting polymers by acoustic mixing

A method including combining an aniline monomer, an oxidant, water and an organic solvent; subjecting the combination to acoustic mixing to form an emulsion; and recovering a polyaniliine from the combination. A method including combining a aniline monomer, an oxidant, water and an organic solvent; forming a polyaniline by acoustic mixing the combination; and recovering the polyaniliine from the combination. A method including forming a combination of an aniline monomer, an oxidant, water and an organic solvent in the absence of an emulsifier; acoustic mixing the combination for a time period to form a polyaniline; and recovering a polyaniliine from the combination.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Resonant surface acoustic wave chemical detector

Apparatus for chemical detection includes a pair of interdigitated transducers (IDTs) formed on a piezoelectric substrate. The apparatus includes a layer of adsorptive material deposited on a surface of the piezoelectric substrate between the IDTs, where each IDT is conformed, and is dimensioned in relation to an operating frequency and an acoustic velocity of the piezoelectric substrate, so as to function as a single-phase uni-directional transducer (SPUDT) at the operating frequency. Additionally, the apparatus includes the pair of IDTs is spaced apart along a propagation axis and mutually aligned relative to said propagation axis so as to define an acoustic cavity that is resonant to surface acoustic waves (SAWs) at the operating frequency, where a distance between each IDT of the pair of IDTs ranges from 100 wavelength of the operating frequency to 400 wavelength of the operating frequency.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Acoustic transmission devices and process for making and using same

Acoustic tags and a process for fabrication are disclosed for identifying and tracking various hosts including inanimate and animate objects in up to three dimensions. The acoustic tags may be powered by a single power source. Tags can have an operation lifetime of up to 90 days or longer at a transmission rate of 3 seconds. The acoustic tags have an enhanced signal range that enhances detection probability when tracking the hosts.

47 OTHER INSTRUMENTATION↗
DOE OSTI2018

Injectable acoustic transmission devices and process for making and using same

Injectable acoustic tags and a process of making are described for tracking host animals in up to three dimensions. The injectable acoustic tags reduce adverse biological effects and have a reduced cost of manufacture compared with conventional surgically implanted tags. The injectable tags are powered by a single power source with a lifetime of greater than 30 days. The injectable tags have an enhanced acoustic signal transmission range that enhances detection probability for tracking of host animals.

47 OTHER INSTRUMENTATION↗
DOE OSTI2018

Acoustic camera

Apparatus for generating accurate 3-dimensional images of objects immersed in liquids including optically opaque liquids which may also have significant sound attenuation, is described. Sound pulses are caused to impinge on the object, and the time-of-flight of the reflected sound is used to create a 3-dimensional image of the object in almost real-time. The apparatus is capable of creating images of objects immersed in fluids that are optically opaque and have high sound attenuation at resolutions less than about 1 mm. The apparatus may include a piezoelectric transducer for generating the acoustic pulses; a high-density polyethylene compound acoustic lens, a 2-dimensional segmented piezoelectric detecting array positioned behind the lens for receiving acoustic pulses reflected by the object, the electric output of which is directed to digital signal processing electronics for generating the image.

47 OTHER INSTRUMENTATION↗
DOE OSTI2018

Acoustic transmission device and process for tracking selected hosts

A new acoustic tag and process are disclosed for identifying and tracking underwater hosts in up to three dimensions. The acoustic tag has an operation lifetime up to a year or longer at a pulse rate interval of about 15 seconds. The acoustic tag has a signal detection range up to at least about 500 meters that enhances detection probability.

47 OTHER INSTRUMENTATION↗
DOE OSTI2019

Acoustic manipulation of fluids based on eigenfrequency

An acoustic resonator device includes a fluid chamber with a carrier surface and a reflector surface. The fluid chamber is filled with a volume of a fluid that includes a phase-separate material such as algae. The carrier surface is coupled to a transducer, which may be a lead zirconate titanate (PZT) transducer. The transducer, when supplied with electricity, emits an acoustic wave-based output of an output frequency (e.g., ultrasound). A sensor may be used to track one or more eigenfrequencies of the volume of fluid, the acoustic resonator device, or some combination thereof. A controller may receive tracking data from the sensor and control the voltage source, the transducer, or some combination thereof to ensure that the output frequency matches one of the tracked eigenfrequencies, thereby maximizing excitation of the fluid to improve efficiency of mixing, stimulation, and separation of materials from fluid (e.g., for algal biocrude production).

09 BIOMASS FUELS↗
DOE OSTI2019

Detection and monitoring of changes in metallic structures using multimode acoustic signals

Methods for detecting and monitoring changes in mechanical structures and in walls of pipes, vessels and storage tanks, using muitimode acoustic signal propagation and detection, are described. Acoustic signals having chosen amplitude-time-frequency characteristics excite multiple modes in the structure under investigation, are generated and received at a small number of accessible locations, such as the ends of pipes and the tops and bottoms of vessels and storage tanks, with the inspection region between transmit and receive transducers. Small mechanical changes lead to acoustic scattering and attenuation among the various modes, which are detectable as changes in received signal intensity. Such changes may include material loss, material conversion and material addition. Once the structure is characterized in a known condition, the present method may be used to monitor the structure at a later time to determine whether changes have taken place. Methods for effective temperature compensation are also described. In addition, various pipe geometries and complex pipe geometries involving elbows, flanges, and the like can be monitored.

42 ENGINEERING↗