Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ABLATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33

Self-limiting and complete oxidation of silicon nanostructures produced by laser ablation in water

Oxidized Silicon nanomaterials produced by 1064 nm pulsed laser ablation in deionized water are investigated. High-resolution transmission electron microscopy coupled with energy dispersive X-ray spectroscopy allows to characterize the structural and chemical properties at a sub-nanometric scale. This analysis clarifies that laser ablation induces both self-limiting and complete oxidation processes which produce polycrystalline Si surrounded by a layer of SiO{sub 2} and amorphous fully oxidized SiO{sub 2}, respectively. These nanostructures exhibit a composite luminescence spectrum which is investigated by time-resolved spectroscopy with a tunable laser excitation. The origin of the observed luminescence bands agrees with the two structural typologies: Si nanocrystals emit a μs-decaying red band; defects of SiO{sub 2} give rise to a ns-decaying UV band and two overlapping blue bands with lifetime in the ns and ms timescale.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Impact of environmental oxygen on nanoparticle formation and agglomeration in aluminum laser ablation plumes

Here, the role of ambient oxygen gas (O 2 ) on molecular and nanoparticle formation and agglomeration was studied in laser ablation plumes. As a lab-scale surrogate to a high explosion detonation event, nanosecond laser ablation of an aluminum alloy (AA6061) target was performed in atmospheric pressure conditions. Optical emission spectroscopy and two mass spectrometry techniques were used to monitor the early to late stages of plasma generation to track the evolution of atoms, molecules, clusters, nanoparticles, and agglomerates. The experiments were performed under atmospheric pressure air, atmospheric pressure nitrogen, and 20% and 5% O 2 (balance N 2 ), the latter specifically with in situ mass spectrometry. Electron microscopy was performed ex situ to identify crystal structure and elemental distributions in individual nanoparticles. We find that the presence of ≈20% O 2 leads to strong AlO emission, whereas in a flowing N 2 environment (with trace O 2 ), AlN and strong, unreacted Al emissions are present. In situ mass spectrometry reveals that as O 2 availability increases, Al oxide cluster size increases. Nanoparticle agglomerates formed in air are found to be larger than those formed under N 2 gas. High-resolution transmission electron microscopy demonstrates that Al 2 O 3 and AlN nanoparticle agglomerates are formed in both environments; indicating that the presence of trace O 2 can lead to Al 2 O 3 nanoparticle formation. The present results highlight that the availability of O 2 in the ambient gas significantly impacts spectral signatures, cluster size, and nanoparticle agglomeration behavior. These results are relevant to understanding debris formation in an explosion event, and interpreting data from forensic investigations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Surface nanotexturing of tantalum by laser ablation in water

Surface nanotexturing of tantalum by ablation with short laser pulses in water has been studied experimentally using three ablation sources: a neodymium laser with a pulse duration of 350 ps, an excimer laser (248 nm) with a pulse duration of 5 ps and a Ti:sapphire laser with a pulse duration of 180 fs. The morphology of the nanotextured surfaces has been examined using a nanoprofilometer and field emission scanning electron microscope. The results demonstrate that the average size of the hillocks produced on the target surface depends on the laser energy density and is {approx}200 nm at an energy density approaching the laser-melting threshold of tantalum and a pulse duration of 350 ps. Their surface density reaches 10{sup 6} cm{sup -2}. At a pulse duration of 5 ps, the average hillock size is 60-70 nm. Nanotexturing is accompanied by changes in the absorption spectrum of the tantalum surface in the UV and visible spectral regions. The possible mechanisms of surface nanotexturing and potential applications of this effect are discussed. (nanostructures)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Formation of nanoparticles during laser ablation of an iron target in a liquid

Formation of nanoparticles during laser ablation of a bulk iron target in water and isopropyl alcohol by pulsed near-IR laser radiation has been experimentally investigated. The experiments were performed using a 3-ns neodymium laser and a 100-ns ytterbium fibre laser. A size distribution function is obtained for the nanoparticles, which is peaking near 15 nm. The diffraction patterns of the nanoparticles exhibit pronounced peaks of metallic iron. An analysis of the nanoparticles by transmission electron microscopy shows that in some cases they have a core - shell structure. The nanoparticles formed by laser ablation have pronounced magnetic properties. The absorption spectra of colloids with iron nanoparticles contain peaks, which presumably correspond to the electron plasmon resonance in these particles.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Ablation and nanostructuring of metals by femtosecond laser pulses

Using an interferometric continuous monitoring technique, we have investigated the motion of the surface of an aluminium target in the case of femtosecond laser ablation at picosecond time delays relative to the instant of laser exposure. Measurements of the temporal target dispersion dynamics, molecular dynamics simulation results and the morphology of the ablation crater have demonstrated a thermomechanical (spall) nature of the disruption of the condensed phase due to the cavitation-driven formation and growth of vapour phase nuclei upon melt expansion, followed by the formation of surface nanostructures upon melt solidification. The tensile strength of heated aluminium in a condensed state has been determined experimentally at an expansion rate of ∼10{sup 9} s{sup -1}. (extreme light fields and their applications)

36 MATERIALS SCIENCE↗

Optical, structural and morphological properties of zirconia nanoparticles prepared by laser ablation in liquids

Absorption, fluorescence and Raman spectra, the structural composition and morphology of zirconia nanoparticles synthesised via the laser ablation of a metal in water and aqueous solutions of the sodium dodecyl sulphate (SDS) surfactant have been studied using absorption spectroscopy, Raman spectroscopy, X-ray diffraction and scanning electron microscopy. The results demonstrate that, exposing zirconium to intense nanosecond laser pulses at a high repetition rate in these liquids, one can obtain stable cubic, tetragonal and monoclinic crystalline phases of nanozirconia with a particle size in the range 40 – 100 nm and a Zr – SDS organic – inorganic composite. The absorption and fluorescence of the synthesised zirconia strongly depend on the SDS concentration in the starting solution. The gas – vapour bubbles forming during ablation are shown to serve as templates for the formation of hollow nanoand microstructures. (nanostructures)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optical transmission and laser ablation of pathologically changed eye lens capsule

Optical transmission and ablation mechanisms in the secondary cataract films under the impact of 1.06-mm laser radiation are studied. The comparison of incident and transmitted (paraxial) radiation power at different values of the power density is carried out for two types of the eye lens capsule tissue (hard and soft) possessing different optical and mechanical properties. It is found that the effective attenuation coefficient for soft films is almost five times as large as that for the hard ones. The obtained measurement data on the transparency variation in the process of laser action allow the temperature evaluation and the determination of dominant mechanism of laser ablation, as well as the development of recommendations, providing the prevention or reduction of possible side effects. The obtained results can be used to optimise the regimes of laser impact in the process of the opacified lens capsule removal.

36 MATERIALS SCIENCE↗

Pulsed laser ablation of Ni in vacuum and N{sub 2} atmosphere at various fluences

Mechanisms of Ni ablation in vacuum and N{sub 2} atmosphere at various fluences ranging from 2.1 J cm{sup -2} to 3.4 J cm{sup -2} are studied by using a KrF excimer laser. The formation of various conical microstructures, ripples, large-sized irregular shaped cavities and pits is found. It is shown that no new phases are formed in the case of Ni ablation in vacuum, while new phases of nitrides and nitrooxides appear in the N{sub 2} environment. The microhardness analysis of targets irradiated in vacuum shows a decreasing trend with increasing fluence, whereas in the case of the N{sub 2} environment, a monotonic increase in hardness with increasing fluence is observed. (interaction of laser radiation with matter. laser plasma)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Condensation of ablation plumes in the irradiation of metals by high-intensity nanosecond laser pulses at atmospheric pressure

The Anisimov–Luk'yanchuk model is adapted for describing the condensation of vapour-plasma plumes produced in the irradiation of metal targets by high-intensity (10{sup 8} – 10{sup 10} W cm{sup -2}) nanosecond (10 – 100 ns) pulses at atmospheric pressure. The resultant data suggest that the initial stages of the development of metal ablation plumes correspond with a high degree of accuracy to the Zel'dovich–Raizer theory of dynamic condensation; however, at the stage of the ablation plume decay, the liquid-droplet phase is formed primarily by coalescence of 'nuclei'. (interaction of laser radiation with matter. laser plasma)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of nanoparticle sizes on the extinction spectrum of colloidal solutions produced by laser ablation of gold in water

We have measured the extinction spectra of colloidal solutions of gold nanoparticles synthesised by nanosecond laser ablation in water for the conditions of a bimodal particle size distribution. The extinction spectra are analysed by using the Mie theory and the contribution of particles of different sizes to the radiation attenuation is established. A method is proposed for determining the concentrations of individual populations of particles in a solution on the basis of the spectral dependence of the extinction coefficient. Mechanisms of the nanoparticle formation during laser ablation of metals in liquids are discussed. (nanoparticles)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ablation of hexagonal boron nitride by UV laser radiation

We report an experimental study of ablation of hexagonal boron nitride ceramics irradiated by 193- and 248-nm laser pulses. The dependences of the material removal rate and the crater wall slope on the energy density in the irradiation spot are obtained. An ablation regime is found, when the material removal rate reaches 5 mm per pulse, which is not typical of nanosecond laser radiation. It is shown that at relatively low radiation intensities (about 5–10 J cm{sup −2}), the slope angle of the formed crater wall does not exceed 20°. (interaction of laser radiation with matter)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Modeling ultrashort-pulse laser ablation of dielectric materials

An approach to modeling ablation thresholds and depths in dielectric materials is proposed. The model is based on the multiple-rate-equation description suggested by Rethfeld [Phys. Rev. Lett. 92, 187401 (2004)]. This model has been extended to include a description of the propagation of the light into the dielectric sample. The generic model is based on only a few experimental quantities that characterize the native material. A Drude model describing the evolution of the dielectric constant owing to an excitation of the electrons in the material is applied. The model is compared to experimental ablation data for different dielectric materials from the literature.

74 ATOMIC AND MOLECULAR PHYSICS↗

Material swelling as the first step in the ablation of metals by ultrashort laser pulses

The ablation from a single-crystal Al(111) surface with single ultrashort near-infrared laser pulses has been investigated under ultrahigh vacuum conditions. Scanning-electron and atomic-force microscopy of the irradiated surface reveal a surprising development of the material response at increasing fluence: at low fluence, swelling exceeding one hundred nanometers dominates. At higher fluences, a hole is gradually formed in the swollen material, which eventually reaches below the original surface level. The observations indicate the significance of mechanical effects during ablation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of Mass Ablation on the Scaling of X-Ray Power with Current in Wire-Array Z Pinches

X-ray production by imploding wire-array Z pinches is studied using radiation magnetohydrodynamics simulation. It is found that the density distribution created by ablating wire material influences both x-ray power production, and how the peak power scales with applied current. For a given array there is an optimum ablation rate that maximizes the peak x-ray power, and produces the strongest scaling of peak power with peak current. This work is consistent with trends in wire-array Z pinch x-ray power scaling experiments on the Z accelerator.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Lithography-Free Mesa Isolation of III–V Solar Cells Through Laser Ablation

Eliminating photolithography from solar cell processing is a significant opportunity for cost reduction for III-V solar cells. Here, in this work, we explore femtosecond laser ablation as an alternative to contact photolithography and wet chemical etching for mesa isolation. We demonstrate both GaAs and GaInP solar cells mesa-isolated by femtosecond laser ablation with minimal to no loss in solar cell performance. We show the best results with a 400 fs UV pulsed laser and a short clean-up etch that also serves as a contact layer removal etch.

14 SOLAR ENERGY↗

Lithography-Free Mesa Isolation by Laser Ablation for Multijunction III-V Photovoltaic Space Power Generation

Eliminating photolithography from photovoltaic device processing is a significant opportunity for cost reduction and increased manufacturing throughput. In this work, we test femtosecond laser ablation and scribing as an alternative to contact photolithography and wet chemical etching for mesa isolation of multijunction devices. We demonstrate that upright multijunction devices isolated by using the laser as a scribe to cleave through the substrate had virtually no performance loss when compared to a baseline device processed with photolithography. By contrast, devices isolated by laser ablating through the active layers have performance losses that cannot be fully eliminated with postprocess etching. This demonstration of photolithography-free mesa isolation with no performance losses is promising as a pathway to less expensive and higher throughput III-V device manufacturing.

14 SOLAR ENERGY↗

Angular distribution of atoms emitted from a SrZrO{sub 3} target by laser ablation under different laser fluences and oxygen pressures

Angular distributions of atoms emitted by laser ablation of perovskite-type oxide SrZrO{sub 3} have been investigated using electron probe microanalysis with wavelength-dispersive spectroscopy and charge-coupled device photography with an interference filter. Each constituent element has been analyzed as a two-modal distribution composed of a broad cos{sup m} {theta} distribution and a narrow cos{sup n} {theta} distribution. The exponent n characterizes the component of laser ablation while the exponent m characterizes that of thermal evaporation, where a larger n or m means a narrower angular distribution. In vacuum, O (n=6) showed a broader distribution than those of Sr (n=16) and Zr (n=17), and Sr{sup +} exhibited a spatial distribution similar to that of Sr. As the laser fluence was increased from 1.1 to 4.4 J/cm{sup 2}, the angular distribution of Sr became narrower. In the laser fluence range of 1.1-4.4 J/cm{sup 2}, broadening of the angular distribution of Sr was observed only at the fluence of 1.1 J/cm{sup 2} under the oxygen pressure of 10 Pa. Monte Carlo simulations were performed to estimate approximately the energy of emitted atoms, focusing on the broadening of the angular distribution under the oxygen pressure of 10 Pa. The energies of emitted atoms were estimated to be 1-20 eV for the laser fluence of 1.1 J/cm{sup 2}, and more than 100 eV for 2.2 and 4.4 J/cm{sup 2}.

36 MATERIALS SCIENCE↗

Fabrication of freestanding LiNbO{sub 3} thin films via He implantation and femtosecond laser ablation

The authors report using a combination of ion-implantation exfoliation and femtosecond laser ablation to fabricate thin (micrometers-thick) single-crystal films of a complex oxide, LiNbO{sub 3}. The process physics for the method is bounded by the threshold for ablation and the onset of laser thermal outdiffusion of the implanted He used in exfoliation selective etching.

36 MATERIALS SCIENCE↗