SEARCH · Engineering Papers

Results for “zero emission”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

All sources NASA NTRS DOE OSTI

DOE OSTI2024

Provincial-scale assessment of direct air capture to meet China’s climate neutrality goal under limited bioenergy supply

China has large, estimated potential for direct air carbon capture and storage (DACCS) but its deployment locations and impacts at the subnational scale remain unclear. This is largely because higher spatial resolution studies on carbon dioxide removal (CDR) in China have focused mainly on bioenergy with carbon capture and storage. This study uses a spatially detailed integrated energy-economy-climate model to evaluate DACCS for 31 provinces in China as the country pursues its goal of climate neutrality by 2060. We find that DACCS could expand China’s negative emissions capacity, particularly under sustainability-minded limits on bioenergy supply that are informed by bottom-up studies. But providing low-carbon electricity for multiple GtCO 2 yr -1 DACCS may require over 600 GW of additional wind and solar capacity nationwide and comprise up to 30% of electricity demand in China’s northern provinces. Investment requirements for DACCS range from 330 to 530 billion dollars by 2060 but could be repaid manyfold in the form of avoided mitigation costs, which DACCS deployment could reduce by up to $6 trillion over the same period. Enhanced efforts to lower residual CO 2 emissions that must be offset with CDR under a net-zero paradigm reduce but do not eliminate the use of DACCS for mitigation. For decision-makers and the energy-economy models guiding them, our results highlight the value of expanding beyond the current reliance on biomass for negative emissions in China.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2025

Co-Firing Switchgrass and Waste Coal in A Power Plant: A Techno-Economic and Life Cycle Evaluation for The Ohio River Valley (SWITCH) (Final Technical Report for Ohio State/FE0032204)

Abandoned coal mine lands (AMLs) represent one of the most persistent environmental challenges in the United States. Prior to the enactment of the Surface Mining Control and Reclamation Act (SMCRA) in 1977, coal mining operations were not legally required to reclaim disturbed lands, leaving behind approximately 500,000 AML sites nationwide. These sites pose severe environmental and health risks, including acid mine drainage, soil and water contamination, and spontaneous combustion of waste coal piles. Millions of Americans live within one mile of these AMLs, underscoring the urgency of remediation. Traditional reclamation practices, such as planting cool-season grasses, often fail to fully restore ecological function or leverage the economic potential of these lands. This project addressed these challenges by developing integrated strategies for resource recovery, land reclamation, and sustainable energy production. This project evaluated an integrated strategy to convert this liability into an opportunity by recovering waste coal and co-firing it with switchgrass (Panicum virgatum L.) cultivated on reclaimed or marginal AML areas in existing coal-fired power plants. Switchgrass not only provides a renewable feedstock but also aids in land reclamation and carbon sequestration. 1) Remote Sensing and Machine Learning for Waste Coal Identification Using Sentinel-2 satellite imagery and supervised classification, we applied four machine learning models to detect historical waste coal piles. Random Forest achieved the highest accuracy (precision: 86%, recall: 77%). Time-series analysis revealed gradual vegetation recovery since 1986, indicating natural reclamation processes in historical sites, while active mining areas showed ongoing disturbance. This workflow enables scalable monitoring and prioritization of reclamation efforts. 2) UAS-Based Stockpile Volume Estimation To quantify recoverable waste coal, we evaluated Unmanned Aerial Systems (UAS) equipped with Light Detection and Ranging (LiDAR) and multispectral sensors. Structure-from-Motion (SfM) photogrammetry combined with interpolated Digital Terrain Models (DTMs) achieved strong agreement with LiDAR reference volumes (Root Mean Square Error (RMSE) ≈147 m 3 , Mean Absolute Percentage Error (MAPE) ≈2%). Sensitivity analysis confirmed that spatial resolution significantly influences accuracy, emphasizing the need for high-resolution data for precise volume estimation. This approach offers a scalable, cost-effective, and accurate alternative to conventional ground-based surveys. 3) Switchgrass Cultivation for Bioenergy and Water Quality Improvement We assessed the hydrological and water quality impacts of converting AMLs to switchgrass production areas using the Soil and Water Assessment Tool (SWAT). Results showed that converting 10% of the watershed area into the switchgrass production zone reduced streamflow by 3.1%, total suspended solids by 18.1%, total nitrogen by 7.6%, and total phosphorus by 6.2%, while achieving biomass yields of 8.6–9.2 metric tons per hectare. These findings highlight switchgrass as a dual-benefit strategy for land reclamation and bioenergy feedstock production. 4) Integrated Co-Firing and CCS for Carbon-Negative Power Generation We modeled co-firing scenarios using the Power Plant Flexible Model (PPFM) to evaluate plant efficiency, greenhouse gas (GHG) emissions, and levelized cost of electricity (LCOE). Without carbon capture and storage (CCS), increasing switchgrass co-firing ratios reduced LCOE from $\$$150/MWh at 0% biomass to $\$$110/MWh at full substitution. Under CCS, costs remained higher (~$\$$250/MWh at 0% biomass) but decreased to $\$$200/MWh at 100% biomass, while enabling net-zero or carbon-negative electricity due to switchgrass sequestration benefits. Although CCS introduced efficiency penalties, pairing it with biomass co-firing offset these impacts and maximized climate benefits. Overall, optimizing co-firing ratios between 60-100%, supported by reliable logistics and storage strategies, emerged as a practical pathway to balance affordability, sustainability, and net-zero or negative GHG emissions while promoting productive reuse of AMLs.

01 COAL, LIGNITE, AND PEAT↗

DOE OSTI2023

Idaho national laboratory to demonstrate collaboration first versus competition to accelerate achieving a secure clean energy future by 2031

Idaho National Laboratory (INL) announced at COP27 it would reach net zero greenhouse gas (GHG) emissions by 2031. As a Nuclear, Energy and Environment, and National Homeland Security laboratory, the predominant solution to closing the clean energy gap will include nuclear as a safe, clean, reliable and affordable electricity source with the additional benefit of producing heat and hydrogen to fuel INL’s large transportation fleet. INL’s collaboration first vs. competition is essential to the program’s success. The focused actions in INL’s Nuclear Roadmap include: Infrastructure, Licensing/Regulatory, Financial, Time to Market, Fuel Cycle and Public Confidence/Communications. The roadmap also includes nuclear technology innovations and creative partnerships with utility providers, regulators, businesses, community members, and Indigenous Peoples to accelerate deployment of advanced reactors. Through development of the Net-Zero Nuclear Roadmap, INL will offer a model to provide safe and secure energy for the nation and the world by: (1) establishing the necessary infrastructure on its 890-square mile site to support demonstration, (2) showing proven pathways through the licensing and regulation process, (3) partnering with utilities to ensure commercial application, and (4) collaborating with industry to site new technologies.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2020

Data from: No‐till establishment improves the climate benefit of bioenergy crops on marginal grasslands

Expanding biofuel production is expected to accelerate the conversion of unmanaged marginal lands to meet biomass feedstock needs. Greenhouse gas production during conversion jeopardizes ensuing climate benefits, but most research to date has focused only on conversion to annual crops and only following tillage. Here we report the global warming impact of converting USDA Conservation Reserve Program (CRP) grasslands to three types of bioenergy crops using no-till (NT) versus conventional tillage (CT). In three CRP fields planted to continuous corn, switchgrass, or restored prairie we established replicated NT and CT plots. For the two years following an initial soybean year in all fields, we found that, on average, NT conversion reduced nitrous oxide (N2O) emissions by 50% and carbon dioxide (CO2) emissions by 20% compared to CT conversion. Differences were higher in year 1 than in year 2 in the continuous corn field, and in the two perennial systems the differences disappeared after year 1. In all fields net CO2 emissions (as measured by eddy covariance) were positive for the first two years following CT establishment, but following NT establishment net CO2 emissions were close to zero or negative, indicating net C sequestration. Overall, NT improved the global warming impact of biofuel crop establishment following CRP conversion by over 20-fold compared to CT (-6.01 Mg CO2e ha-1 yr-1 for NT vs. -0.25 Mg CO2e ha-1 yr-1 for CT, on average). We also found that IPCC estimates of N2O emissions (as measured by static chambers) greatly underestimated actual emissions for converted fields regardless of tillage. Policies should encourage adoption of NT for converting marginal grasslands to perennial bioenergy crops in order to reduce carbon debt and maximize climate benefits.

09 BIOMASS FUELS↗

DOE OSTI2020

No–till establishment improves the climate benefit of bioenergy crops on marginal grasslands

Expanding biofuel production is expected to accelerate the conversion of unmanaged marginal lands to meet biomass feedstock needs. Greenhouse gas production during conversion jeopardizes the ensuing climate benefits, but most research to date has focused only on conversion to annual crops and only following tillage. Here we report the global warming impact of converting USDA Conservation Reserve Program (CRP) grasslands to three types of bioenergy crops using no–till (NT) vs. conventional tillage (CT). We established replicated NT and CT plots in three CRP fields planted to continuous corn, switchgrass, or restored prairie. For the 2 yr following an initial soybean year in all fields, we found that, on average, NT conversion reduced nitrous oxide (N 2 O) emissions by 50% and CO 2 emissions by 20% compared with CT conversion. Differences were higher in Year 1 than in Year 2 in the continuous corn field, and in the two perennial systems the differences disappeared after Year 1. In all fields net CO 2 emissions (as measured by eddy covariance) were positive for the first 2 yr following CT establishment, but following NT establishment net CO 2 emissions were close to zero or negative, indicating net C sequestration. Overall, NT improved the global warming impact of biofuel crop establishment following CRP conversion by over 20–fold compared with CT (–6.01 Mg CO 2 e ha –1 yr –1 for NT vs. –0.25 Mg CO 2 e ha –1 yr –1 for CT, on average). We also found that Intergovernmental Panel on Climate Change estimates of N 2 O emissions (as measured by static chambers) greatly underestimated actual emissions for converted fields regardless of tillage. Policies should encourage adoption of NT for converting marginal grasslands to perennial bioenergy crops to reduce C debt and maximize climate benefits.

54 ENVIRONMENTAL SCIENCES↗

NASA NTRS2002

Ferroelectric Emission Cathodes for Low-Power Electric Propulsion

Low- or no-flow electron emitters are required for low-power electric thrusters, spacecraft plasma contactors, and electrodynamic tether systems to reduce or eliminate the need for propellant/expellant. Expellant-less neutralizers can improve the viability of very low-power colloid thrusters, field emission electric propulsion devices, ion engines, Hall thrusters, and gridded vacuum arc thrusters. The NASA Glenn Research Center (GRC) is evaluating ferroelectric emission (FEE) cathodes as zero expellant flow rate cathode sources for the applications listed above. At GRC, low voltage (100s to approx. 1500 V) operation of FEE cathodes is examined. Initial experiments, with unipolar, bipolar, and RF burst applied voltage, have produced current pulses 250 to 1000 ns in duration with peak currents of up to 2 A at voltages at or below 1500 V. In particular, FEE cathodes driven by RF burst voltages from 1400 to 2000 V peak to peak, at burst frequencies from 70 to 400 kHz, emitted average current densities from 0.1 to 0.7 A/sq cm. Pulse repeatability as a function of input voltage has been initially established. Reliable emission has been achieved in air background at pressures as high as 10(exp -6) Torr.

Kovaleski, Scott D.↗

DOE OSTI2021

Experimental investigation of fuel temperature effects on transient needle motion and injection velocity of solenoid type diesel injector

Real driving emission (RDE) test conducted in sub-zero temperature conditions has been acting as a severe emission regulation over the existing test methods for diesel engines. In order to cope with this tightened regulation, many studies have been conducted to interpret the factors causing the deteriorated diesel engine combustion in cold operation conditions. The deteriorated fuel injection performance has been regarded as one of the key contributing factors but the governing mechanisms are not thoroughly understood so far. This study aims to provide a comprehensive understanding of the effects of fuel temperature including sub-zero conditions on fuel injection performance by measuring the transient needle motion and injection velocity of a diesel injector using synchrotron X-ray imaging techniques. Here, the factors causing the deteriorated injector performance and their contributions are discussed thoroughly based on the results. The results showed that the injection duration was shortened as the fuel temperature decreased as a result of decreased needle opening speed and increased needle closing speed. The increase of fuel viscosity and bulk modulus was discussed as the main factors associated with these results. The total injection mass was reduced by lowering the fuel temperature not only by the shortened injection duration but also by the decreased injection velocity. These factors exerted near equivalent contribution to the reduced injection mass at low fuel temperatures.

42 ENGINEERING↗

DOE OSTI2022

Catalytic Processes to Accelerate Decarbonization in a Net-Zero Carbon World

Reducing carbon dioxide emissions is one of the critical challenges to mitigate global climate change, which is having detrimental impacts on society and the environment. Fossil fuel combustion in transportation, power generation, and industrial processes is the dominant contributor to carbon emissions. Over the past decades, sustainable solutions and strategies have been investigated and developed to enable decarbonization. Catalysis plays an essential role to address this global challenge by increasing energy efficiency, reducing carbon emissions, capturing carbon dioxide, and utilizing clean energy sources to displace fossil fuels. In this Review, the role of catalysis in reducing energy demand was discussed, enhancing process efficiency, displacing carbon-intensive feedstocks and products, and therefore, reducing carbon emissions. Here, recent advances in catalyst development were summarized, focusing on applications to enhance industrial processes efficiency and enable utilization of clean energy sources. Emerging approaches in catalysis were reviewed, including the manufacture of iron and steel, direct air capture of CO 2 , production of ethylene, ammonia, and sustainable aviation fuels, plastic recycling, and the synthesis of biobased plastics. The Review was concluded with suggested research directions to achieve a carbon net-zero world.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Assessing the cost-effectiveness of carbon neutrality for light-duty vehicle sector in China

China’s progress in decarbonizing its transportation, particularly vehicle electrification, is notable. However, the economically effective pathways are underexplored. To find out how much cost is necessary for carbon neutrality for the light-duty vehicle (LDV) sector, this study examines twenty decarbonization pathways, combining the New Energy and Oil Consumption Credit model and the China-Fleet model. We find that the 2060 zero-greenhouse gas (GHG) emission goal for LDVs is achievable via electrification if the battery pack cost is under CNY483/kWh by 2050. However, an extra of CNY8.86 trillion internal subsidies is needed under pessimistic battery cost scenarios (CNY759/kWh in 2050) to eliminate 246 million tonnes of CO 2 -eq by 2050 ensuring over 80% market penetration of battery electric vehicles (BEVs) in 2050. Moreover, the promotion of fuel cell electric vehicles is synergy with BEVs to mitigate the carbon abatement difficulties, decreasing up to 34% of the maximum marginal abatement internal investment.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2026

Responsibility for emissions and mitigation capability should guide use of carbon removal offsets

M Gidden conducted this work prior to joining PNNL and no DOE OFFICE OF SCIENCE, OTHER DOE, OTHER FEDERAL, OR PNNL OVERHEAD FUNDING is being used. Stabilizing and then drawing down global temperature requires achieving net-negative CO2 emissions globally. Carbon removal is needed to offset “hard-to-abate” sectors that remain sources of emissions at net-zero and beyond. We argue the use of scarce carbon removal resources should be guided by the principles enshrined in the Paris Agreement.

Gidden, Matthew↗

DOE OSTI2024

Waste management strategies for military-generated waste in the United States

Sustainable and energy efficient municipal solid waste (MSW) management is vital for the health and performance of deployed soldiers, as they play an important role in the safety and dignity of a country. As the United States targets net-zero carbon-free emission goals, research and development are essential to surpassing current practices for management of MSW at military installations, both at home and abroad. To achieve this, it is important to act upon and implement the policies and instructions set by government agencies such as the Environmental Protection Agency (EPA), the Department of Energy (DOE), and the Department of Defense (DoD). Understanding the composition of waste and disposal methods that are in use at military installations is a crucial step to success. Here, the authors show this through analyzed data from trusted sources, such as government agencies, reports, magazines, journals, and other publications on MSW management techniques. By defining these challenges, possible solutions can be better understood for improved management of MSW at military installations in the United States. Finally, an integrated approach with deployable units capable of waste-to-energy technology using waste reduction, diversion, and recycling strategies shows to be an effective pathway for MSW conversion into energy and other useful products.

09 BIOMASS FUELS↗

DOE OSTI2022

Economic and biophysical limits to seaweed farming for climate change mitigation

Net-zero greenhouse gas (GHG) emissions targets are driving interest in opportunities for biomass-based negative emissions and bioenergy, including from marine sources such as seaweed. Yet the biophysical and economic limits to farming seaweed at scales relevant to the global carbon budget have not been assessed in detail. We use coupled seaweed growth and technoeconomic models to estimate the costs of global seaweed production and related climate benefits, systematically testing the relative importance of model parameters. Under our most optimistic assumptions, sinking farmed seaweed to the deep sea to sequester a gigaton of CO 2 per year costs as little as US$\$$480 per tCO 2 on average, while using farmed seaweed for products that avoid a gigaton of CO 2 -equivalent GHG emissions annually could return a profit of $\$$50 per tCO 2 -eq. However, these costs depend on low farming costs, high seaweed yields, and assumptions that almost all carbon in seaweed is removed from the atmosphere (that is, competition between phytoplankton and seaweed is negligible) and that seaweed products can displace products with substantial embodied non-CO 2 GHG emissions. Moreover, the gigaton-scale climate benefits we model would require farming very large areas (>90,000 km 2 )—a >30-fold increase in the area currently farmed. Our results therefore suggest that seaweed-based climate benefits may be feasible, but targeted research and demonstrations are needed to further reduce economic and biophysical uncertainties.

60 APPLIED LIFE SCIENCES↗

DOE OSTI2020

Mathematical Modeling of Hydroxide-Exchange-Membrane Water Electrolyzer

Water electrolyzers can transform intermittent renewable energy like solar energy and wind energy into the chemical energy of hydrogen with zero greenhouse-gas emissions. The hydroxide-exchange membrane electrolyzer (HEME) combines the capability to produce pressurized hydrogen with the advantage of being able to use low or non-platinum group metal (PGM) electrocatalysts in the alkaline environment.1 Hydroxide salts, for example, KOH, are added to the HEME water feed on both anode and cathode to improve its performance. However, the specific mechanism of performance improvement still needs to be further understood. In addition, at high current densities, bubble evolution can result in mass-transport limitations, a less well studied phenomena. Mathematical modeling is ideal to explore these issues as it is cost and time efficient and can deconvolute the physics, processes, and observed phenomena and study the applied-voltage breakdown. In this work, we extend our previously developed 1D two-phase continuum model2 to study the varies processes in the HEME and provide insights on performance optimizations. First, the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) kinetics at different hydroxide concentrations have been studied by rotating disk electrodes (RDE) and implemented in the model. Then, the model is calibrated and validated against experimental HEME polarization curves for different KOH concentrations as a liquid electrolyte. The model clearly shows a performance increase with increasing KOH concentrations, which is consistent with the experimental results. The reduced ohmic resistance and increased electrochemical active surface area (ECSA) are the two main reasons for performance increase. The large amount of hydroxide in the liquid electrolyte not only helps to distribute the reactant hydroxide throughout the catalyst layer (CL), which reduces ohmic loss, but also enables reaction at the interface between the liquid electrolyte and electrocatalyst, which increases the ECSA. Applied-voltage breakdown demonstrates that the electrolyzer performance is dominated by anode kinetics and ohmic loss. A comparison with the DI water feed shows a more uniform current distribution in the anode CL when KOH is added, which indicates a higher utilization of the CL. Second, we present modeling on the effects of bubble coverage. As gas evolves, part of the ECSA is minimized due to bubble coverage. To account for this effect, an empirical relationship between the fractional bubble coverage and the current density is implemented in the model.3 The model shows this bubble coverage effect is more pronounced at large current densities with DI water feed. Acknowledgements This work was funded under the HydroGEN Consortium by the Energy Efficiency and Renewable Energy, Hydrogen and Fuel Cell Technologies Office, of the U. S. Department of Energy under contract number DE-AC02-05CH11231. References R. Abbasi, B. P. Setzler, S. Lin, J. Wang, Y. Zhao, H. Xu, B. Pivovar, B. Tian, X. Chen, G. Wu and Y. Yan, 31, 1805876 (2019). L. N. Stanislaw, M. R. Gerhardt and A. Z. Weber, ECS Transactions, 92, 767 (2019). H. Vogt and R. J. Balzer, Electrochimica Acta, 50, 2073 (2005).

Liu, Jiangjin↗

DOE OSTI2024

Practical low-temperature gasoline combustion for very high efficiency off-road, medium- and heavy-duty engines

Low-temperature gasoline combustion (LTGC) with additive-mixing fuel injection (AMFI) is a new combustion strategy that has been demonstrated to deliver 9%–25% better brake thermal efficiency than similar-sized market-leading diesel engines over the operating map. Moreover, the LTGC-AMFI engine shows near-zero smoke, and NOx emissions are 4–100 times lower than those of a diesel, sufficiently low that no aftertreatment, or only passive NOx aftertreatment, would be sufficient (diesel exhaust fluid is not required). LTGC-AMFI combustion is based on kinetically controlled compression ignition of a dilute charge with a variable amount of low-to-moderate fuel stratification. Fast combustion control is provided by adding minute amounts of an ignition-enhancing additive into the fuel each engine cycle to control its reactivity. This strategy was used to operate a medium-duty (MD) LTGC-AMFI engine at loads from idle to 16.3 bar BMEP and speeds from 600 to 2400 rpm with regular E10 gasoline, which covers nearly the entire operating map of a typical MD engine. Turbine-out temperatures were sufficient for an oxidation catalyst to control hydrocarbon and CO emissions. Autonomie simulations over the GEM ARB Transient and the GEM 55 mph Cruise driving cycles for class-6 trucks using this technology showed fuel economies of 8.1 and 11.4 mpg-gasoline-equivalent, respectively, corresponding to 18.6% and 13.4% improvements over a similar-size diesel engine. Engine-out NOx emissions were 0.024 and 0.01 g/bhp-h, respectively, well below current U.S. emission standards. These results show that switching from diesel to LTGC-AMFI engines would greatly reduce greenhouse gas (GHG) emissions for off-road, MD and HD applications, which will continue to rely on combustion engines because electrification is not practical in the foreseeable future. Finally, with their reduced fuel consumption, the lower cost of gasoline compared to diesel fuel, and much lower aftertreatment costs, LTGC-AMFI engines also offer a significantly lower total cost of ownership.

33 ADVANCED PROPULSION SYSTEMS↗

DOE OSTI2021

Used Plug-in Electric Vehicles as a Means of Transportation Equity in Low-Income Households

This report examines improving the equity of low-income households through access to reliable means of transportation. Used plug-in electric vehicles (PEVs) can serve as a low-cost and low-maintenance means of transport for low-income households. Zero tail-pipe emissions from PEVs is also a benefit of these drivetrain compared to internal combustion engine vehicles (ICEVs). Barriers to the adoption of the used PEVs, and incentives that may address these barriers were reviewed.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2024

Biogeochemical Responses and Microbial Community Dynamics Responding to Experimental Hydrogen Storage Conditions

Hydrogen has been identified as a flexible energy carrier with zero or negative carbon emission across multiple energy sectors. There is tremendous capacity for deep geologic storage of H2 but many aspects of feasibility, reliability, safety and the potential for unintended consequences need to be examined. As part of a larger programmatic effort to address the knowledge gaps, we aim to gain a better understanding of reservoir microbial communities and their metabolic and biogeochemical responses to hydrogen storage conditions. In this study we collected and characterized reservoir brine from candidate hydrogen storage sites in the southwestern U.S. for use in a temporal reactor series under blended storage conditions (40% H2, 40% CH4, 20% CO2) at reservoir temperature (60°C).

hydrogen storage↗

NASA NTRS1977

A search for ultraviolet OH emission from meteors

Observations of hydroxyl (OH) emission from meteors were made during the late summers of 1975 and 1976 from altitudes of 10,600 and 14,200 feet (3.2 km and 4.45 km). The observations were made with OH meteor photometers developed at the NASA-Langley Research Center. Two of the meteors were Perseids, and one was an Alpha Capricornid. The Perseid meteors produced a peak irradiance at a distance of 100 km from the meteors of about 0.00005 erg/sq cm per sec in the OH emission region. The zero-magnitude Alpha Capricornid meteor produced a spectral irradiance at 3100 A of 23 hundred-millionths erg/sq cm per A per sec. This may be indicative of significant amounts of H2O in these meteors.

Harvey, G. A.↗

NASA NTRS1982

Statistics of cold cumulonimbus anvils based on enhanced infrared photographs

Infrared photographs from the Atlantic Geosynchronous Satellite, enhanced to resolve cold anvil temperatures of tropical clouds, are analyzed statistically to determine their spatial-temporal variability during the NASA-U2 Flight Experiment of 1980. Diurnal dependence varies regionally, indicating topographic control via low level convergence and release of convective instability. Anvil growth rates, area covered and duration are discussed for individual and merging anvil systems. Gradients of anvil temperatures implied by infrared photographs are shown to be caused, in part, by radial decrease in anvil depth, i.e., to emissivities less than 1. An error in cloud top temperature of 10C is caused by 10% reduction in emissivity. Errors are near zero in dense, actively growing portions of the anvil.

Danielsen, E. F.↗