Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “wave interference”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Capabilities and limitations of the Jicamarca radar as an MST radar

The Jicamarca radar (Long. 76.52W, Lat. 11.56S), located at 20 km from Lima at approximately 500 meters over sea level, is surrounded by mountains which provide a good shield from man-made interference. The radio horizon goes from a few hundred meters, across the dry valley where it is located, to 15 km, along the valley in the direction of the continental divide. This limits the clutter to 15 km, except for one high peak at 21 km. It is the most equatorial of all existing MST radars. Its proximity to the Andes, makes its location unique for the study of lee waves and orographic-induced turbulence. Vertical as well as horizontal projections of MST velocities are obtained by simultaneously pointing with different sections of the antenna into three or four different directions. The transmitters, receivers, and systems for data acquisition, processing, and control are included.

Woodman, R. F.↗
NASA NTRS2007

Development of a Rayleigh Scattering Diagnostic for Time-Resolved Gas Flow Velocity, Temperature, and Density Measurements in Aerodynamic Test Facilities

A molecular Rayleigh scattering technique is developed to measure time-resolved gas velocity, temperature, and density in unseeded turbulent flows at sampling rates up to 32 kHz. A high power continuous-wave laser beam is focused at a point in an air flow field and Rayleigh scattered light is collected and fiber-optically transmitted to the spectral analysis and detection equipment. The spectrum of the light, which contains information about the temperature and velocity of the flow, is analyzed using a Fabry-Perot interferometer. Photomultiplier tubes operated in the photon counting mode allow high frequency sampling of the circular interference pattern to provide time-resolved flow property measurements. An acoustically driven nozzle flow is studied to validate velocity fluctuation measurements, and an asymmetric oscillating counterflow with unequal enthalpies is studied to validate the measurement of temperature fluctuations. Velocity fluctuations are compared with constant temperature anemometry measurements and temperature fluctuations are compared with constant current anemometry measurements at the same locations. Time-series and power spectra of the temperature and velocity measurements are presented. A numerical simulation of the light scattering and detection process was developed and compared with experimental data for future use as an experiment design tool.

Mielke, Amy F.↗
NASA NTRS2008

Time-Resolved Rayleigh Scattering Measurements in Hot Gas Flows

A molecular Rayleigh scattering technique is developed to measure time-resolved gas velocity, temperature, and density in unseeded gas flows at sampling rates up to 32 kHz. A high power continuous-wave laser beam is focused at a point in an air flow field and Rayleigh scattered light is collected and fiber-optically transmitted to the spectral analysis and detection equipment. The spectrum of the light, which contains information about the temperature and velocity of the flow, is analyzed using a Fabry-Perot interferometer. Photomultipler tubes operated in the photon counting mode allow high frequency sampling of the circular interference pattern to provide time-resolved flow property measurements. Mean and rms velocity and temperature fluctuation measurements in both an electrically-heated jet facility with a 10-mm diameter nozzle and also in a hydrogen-combustor heated jet facility with a 50.8-mm diameter nozzle at NASA Glenn Research Center are presented.

Mielke, Amy F.↗
NASA NTRS1976

Interference-free wind-tunnel flows by adaptive-wall technology

The adaptive-wall or self-correcting wind tunnel has been proposed for such regimes as transonic and V/STOL where wall effects are large and cannot be corrected for. The power and generality of the concept are pointed out. In a two-dimensional transonic embodiment in the Calspan One-Foot Tunnel, the scheme has been shown to work at lower transonic Mach numbers. Several practical problems are cited, including instrumentation, the nature of the wall modification, and convergence of the iterative procedure. Moreover, questions of shock-wave neutralization at the wall and probable configuration of three-dimensional embodiments are discussed.

Sears, W. R.↗
DOE OSTI2024

Low-energy electronic structure in the unconventional charge-ordered state of ScV6Sn6

Abstract Kagome vanadates A V 3 Sb 5 display unusual low-temperature electronic properties including charge density waves (CDW), whose microscopic origin remains unsettled. Recently, CDW order has been discovered in a new material ScV 6 Sn 6 , providing an opportunity to explore whether the onset of CDW leads to unusual electronic properties. Here, we study this question using angle-resolved photoemission spectroscopy (ARPES) and scanning tunneling microscopy (STM). The ARPES measurements show minimal changes to the electronic structure after the onset of CDW. However, STM quasiparticle interference (QPI) measurements show strong dispersing features related to the CDW ordering vectors. A plausible explanation is the presence of a strong momentum-dependent scattering potential peaked at the CDW wavevector, associated with the existence of competing CDW instabilities. Our STM results further indicate that the bands most affected by the CDW are near vHS, analogous to the case of A V 3 Sb 5 despite very different CDW wavevectors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Evidence for chiral superconductivity on a silicon surface

Tin adatoms on a Si(111) substrate with a one-third monolayer coverage form a two-dimensional triangular lattice with one unpaired electron per site. These electrons order into an antiferromagnetic Mott-insulating state, but doping the Sn layer with holes creates a two-dimensional conductor that becomes superconducting at low temperatures. Although the pairing symmetry of the superconducting state is currently unknown, the combination of repulsive interactions and frustration inherent in the triangular adatom lattice opens up the possibility of a chiral order parameter. Here we study the superconducting state of Sn/Si(111) using scanning tunneling microscopy, scanning tunneling spectroscopy and quasiparticle interference imaging. Here we find evidence for a doping-dependent superconducting critical temperature with a fully gapped order parameter, the presence of time-reversal symmetry breaking and a strong enhancement in zero-bias conductance near the edges of the superconducting domains. Although each individual piece of evidence could have a more mundane interpretation, our combined results suggest the possibility that Sn/Si(111) is an unconventional chiral d-wave superconductor.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1973

Interference patterns of a horizontal electric dipole over layered dielectric media.

Interference patterns for electromagnetic fields due to a subsurface reflector below a layered lossy dielectric are calculated with the geometrical optics approximation for use in interpreting data to be collected on the moon by Apollo 17 as well as data currently being obtained on terrestrial glaciers. The radiating antenna lies on the surface. All six field components are calculated and studied. For the endfire solutions, the peak of the first reflected wave is found to be different from that of the broadside ones. To facilitate a physical discussion, we plotted the radiation patterns due to the antenna on the surface.

Tsang, L.↗
NASA NTRS1980

Scannable beam forming interferometer antenna array system

An antenna array is described which comprises three interferometer pairs of antenna elements with selected spacings made to form a single beam which is readily scannable. All spatial frequencies generated by a signal and intercepted by the array are derived from a signal processing technique applied to the array. The array samples space in the spatial frequency domain while the signal processing technique utilizes real time convolution of functions in the spectral frequency domain. Summation of the appropriate spatial frequencies is equilvalent to a Fourier transform operation, yielding the location of the signal source in space. Resolution and freedom from interference of the interferometer system is equal to that of a fully filled array of the same aperture size containing element spacings of one half wavelength. An antenna array system comprising four antenna elements forming six interferometer pairs with a resolution equal to that of a sixteen element array with spacings of one half wavelength is described, as well as other multiples of one quarter wavelength of partial multiples of a wave length.

Kaiser, J. A., Jr.↗
DOE OSTI2025

In Situ MOF Pyrolysis Construction of Hierarchical Porous Co‐Nanoparticles/Carbon Cloth Composites for Enhanced Electromagnetic Wave Shielding and Absorption

The development of high-performance electromagnetic protection materials integrating broadband absorption and effective shielding capabilities is hindered by challenges in simultaneously optimizing multiple electromagnetic properties through conventional material designs. This study pioneers a hierarchical porous Co nanoparticle/carbon cloth (Co/CC) composite via controlled annealing of a Co-MOF precursor on carbon cloth. The Co-MOF served a dual role as both magnetic source and pore-forming agent, enabling in situ generation of uniformly dispersed Co nanoparticles and creation of abundant pores/interfaces on the CC fibers during pyrolysis. This unique architecture synergistically enhanced dielectric loss (via interfacial/dipolar polarization) and magnetic loss (via natural resonance, exchange interactions, and eddy currents), significantly improving impedance matching. The hierarchical pores further functioned as integrated “absorption–reflection” units for efficient electromagnetic energy attenuation. Consequently, the Co/CC composite annealed at 800°C (Co/CC-800) achieves minimum reflection loss (−40.69 dB) and 120% effective absorption bandwidth extension (6.16 GHz) as a filler, and exhibits superior electromagnetic interference shielding effectiveness (46.66 dB) as an integrated component. Significantly, Co/CC-800 demonstrated robust photothermal and electrothermal conversion capabilities, ensuring operational stability in ice-covered and humid harsh environments. This work pioneers a pore-structure-mediated strategy to harmonize dielectric–magnetic synergy, providing a new paradigm for designing advanced multifunctional electromagnetic protection materials.

dielectric‐magnetic synergy↗
NASA NTRS2014

Crude Oil Remote Sensing, Characterization and Cleaning with CW and Pulsed Lasers

For detection, identification and characterization of crude oil we combine several optical methods of remote sensing of crude oil films and emulsions (coherent fringe projection illumination (CFP), holographic in-line interferometry (HILI), and laser induced fluorescence). These methods allow the three-dimensional characterization of oil spills, important for practical applications. Combined methods of CFP and HILI are described in the frame of coherent superposition of partial interference patterns. It is shown, that in addition to detection/identification laser illumination in the green-blue region can also degrade oil slicks. Different types of surfaces contaminated by oil spills are tested: oil on the water, oil on the flat solid surfaces and oil on the curved surfaces of pipes. For the detection and monitoring of the laser-induced oil degradation in pipes, coherent fiber bundles were used. Both continuous-wave (CW) and pulsed lasers are tested using pump-probe schemes. This finding suggests that properly structured laser clean-up can be an alternative environmentally-friendly method of decontamination, as compared to the currently used chemical methods that are dangerous to environment.

Kukhtareva, Tatiana↗
DOE OSTI2023

Transverse structure of the pion beyond leading twist with basis light-front quantization

We investigate the twist-3transverse-momentum-dependent parton distribution functions (TMDs) of the pion with basis light-front quantization. The twist-3 TMDs are not independent and can be decomposed into twist-2and genuine twist-3 terms from the equations of motion (EOM). We compute the TMDs from the resulting light-front wave functions obtained by diagonalizing the light-front QCD Hamiltonian, determined for pion’s constituent quark-antiquark and quark-antiquark-gluon Fock sectors, with three-dimensional confinement. We also obtain the twist-3 parton distribution functions (PDFs) and show that they preserve the sum rule, which affirms the robustness of our approach. This is the first time that theoretical predictions are made for subleading twist structures of the pion containing interference terms between two light-front Fock sectors.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS1982

Solar atmospheric dynamics. II - Nonlinear models of the photospheric and chromospheric oscillations

The one-dimensional, nonlinear dynamics of the solar atmosphere is investigated, and models of the observed photospheric (300 s) and chromospheric (200 s) oscillations are described. These are resonances of acoustic wave cavities formed by the variation of the temperature and ionization between the subphotospheric, hydrogen convection zone and the chromosphere-corona transition region. The dependence of the oscillations upon the excitation and boundary conditions leads to the conclusion that for the observed amplitudes, the modes are independently excited and, as trapped modes, transport little if any mechanical flux. In the upper photosphere and lower chromosphere, where the two modes have comparable energy density, interference between them leads to apparent vertical phase delays which might be interpreted as evidence of an energy flux.

Leibacher, J.↗
NASA NTRSDate not supplied

Analysis of the Amplitude Response of a Two-Point and a Two-Line/Multi-Point Focused Laser Differential Interferometer

Experiments were performed with two different focused laser differential interferometer (FLDI) instruments to assess the amplitude response of each instrument to a traveling shock-wave generated by a laser spark. The first FLDI instrument generated two measurement points, with each measurement point providing sensitivity to density fluctuations induced by the shockwave. By performing a cross-correlation between the signals obtained from each measurement point, the phase velocity of density fluctuations can be obtained. The second FLDI instrument generated two measurement lines that are oriented either parallel or orthogonal to the shockwave direction of travel with the resulting interference pattern sampled at multiple equally-spaced points along each line. As a result, this instrument provides density fluctuation measurement capability at multiple points simultaneously. When the measurement lines are oriented parallel to the shockwave direction of travel, the phase velocity, rate of change of the phase velocity, and acceleration of density fluctuations traveling along each line can be obtained by performing a cross-correlation between points along a single line. When the measurement lines are oriented orthogonal to the shockwave direction of travel, the spatially-varying phase velocity can be obtained by performing a cross-correlation between points at the same relative location on each measurement line. Computations of the shockwave generated by the laser spark are used to simulate the response of each instrument and are compared to the experimental results. High-speed Schlieren imaging has also been performed and is compared with the FLDI measurements and computational results.

Focused Laser Differential Interferometer↗
NASA NTRS1990

Shock interference heating in scramjet engines

Experimental and analytical research sponsored by the NASA Langley Research center and the NASP Structures Technology Maturation Program to define critical aerothermal loads for the NASP engine is summarized. Presented is a review of (1) shock-shock interaction on the engine cowl leading edge that results in a supersonic jet impinging on the leading edge surface and causes the heat transfer rate to be amplified by a factor of 30 or more over the undisturbed (no shock interaction) flow stagnation point heat transfer rate, (2) the effectiveness of supersonic film cooling with and without the effects of an impinging oblique shock wave, and (3) oblique shock impingement in an axial compression corner.

Wieting, Allan R.↗
DOE OSTI2021

Quantum reactive scattering calculations for the cold and ultracold Li + LiNa → Li 2 + Na reaction

A first-principles based quantum dynamics study of the Li + LiNa(ν = 0, j = 0) → Li 2 (ν', j') + Na reaction is reported for collision energies spanning the ultracold (1 nK) to cold (1 K) regimes. A full-dimensional ab initio potential energy surface for the ground electronic state of Li 2 Na is utilized that includes an accurate treatment of the long-range interactions. The Li + LiNa reaction is barrierless and exoergic and exhibits a deep attractive potential well that supports complex formation. Thus, significant reactivity occurs even for collision temperatures approaching absolute zero. The reactive scattering calculations are based on a numerically exact time-independent quantum dynamics methodology in hyperspherical coordinates. Total and rotationally resolved rate coefficients are reported at 56 collision energies and include all contributing partial waves. Several shape resonances are observed in many of the rotationally resolved rate coefficients and a small resonance feature is also reported in the total rate coefficient near 50 mK. Furthermore, of particular interest, the angular distributions or differential cross sections are reported as a function of both the collision energy and scattering angle. Unique quantum fingerprints (bumps, channels, and ripples) are observed in the angular distributions for each product rotational state due to quantum interference and shape resonance contributions. The Li + LiNa reaction is under active experimental investigation so that these intriguing features could be verified experimentally when sufficient product state resolution becomes feasible for collision energies below 1 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1987

Research in millimeter wave techniques

The areas of millimeter wave (MMW) research include atmospheric propagation and radiometry, advanced MMW component design with emphasis on quasi-optical techniques, and the development of MMW receivers, especially those using subharmonic mixers. Calculations of atmospheric attenuation and radiometric antenna temperature were made in the range 100 to 700 GHz, together with measurements of atmospheric antenna temperature near 95 and 183 GHz. Quasi-optical components designed include lenses, mirrors, and wire grid devices, as well as feedhorns for interference with waveguide components. Subharmonic mixers with state-of-the-art performance at 183 GHz were also developed. Each of these areas of research is summarized.

Mcmillan, R. W.↗