Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “unreliability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Random access to mobile networks with advanced error correction

A random access scheme for unreliable data channels is investigated in conjunction with an adaptive Hybrid-II Automatic Repeat Request (ARQ) scheme using Rate Compatible Punctured Codes (RCPC) Forward Error Correction (FEC). A simple scheme with fixed frame length and equal slot sizes is chosen and reservation is implicit by the first packet transmitted randomly in a free slot, similar to Reservation Aloha. This allows the further transmission of redundancy if the last decoding attempt failed. Results show that a high channel utilization and superior throughput can be achieved with this scheme that shows a quite low implementation complexity. For the example of an interleaved Rayleigh channel and soft decision utilization and mean delay are calculated. A utilization of 40 percent may be achieved for a frame with the number of slots being equal to half the station number under high traffic load. The effects of feedback channel errors and some countermeasures are discussed.

Dippold, Michael↗

Thermal and structural tests of Rene 41 honeycomb integral-tank concept for future space transportation systems

Two flat 12 by 72 inch Rene 41 honeycomb sandwich panels were tested in a manner to produce combined thermal and mechanical longitudinal stresses that simulated those that would occur in a larger, more complex integral tank and fuselage structure of an earth to orbit vehicle. Elastic strains measured at temperatures below 400 F are compared with calculated values obtained from a linear elastic finite element analysis to verify the analytical model and to establish confidence in the calculated strains. Elastic strain measurement at higher temperatures (between 600 F and 1400 F), where strain measurement is more difficult and less certain, are also compared with calculated strains. Agreement between measured and calculated strains for the lower temperatures is good, but agreement for the higher temperatures is poor because of unreliable strain measurements. Test results indicate that an ascent and entry life cycle of 500 is attainable under high combined thermal and mechanical elastic strains.

Shideler, John L.↗

On-line replacement of program modules using AdaPT

One purpose of our research is the investigation of the effectiveness and expressiveness of AdaPT(1), a set of language extensions to Ada 83, for distributed systems. As a part of that effort, we are now investigating the subject of replacing, e.g., upgrading, software modules while the software system remains in operation. The AdaPT language extension provide a good basis for this investigation for several reasons: (1) they include the concept of specific, self-contained program modules which can be manipulated; (2) support for program configuration is included in the language; and (3) although the discussion will be in terms of the AdaPT language, the AdaPT to Ada 83 conversion methodology being developed as another part of this project will provide a basis for the application of our findings to Ada 83 systems. The purpose of this investigation is to explore the basic mechanisms to the replacement process. Thus, while replacement in the presence of real-time deadlines, heterogeneous systems, and unreliable networks is certainly a topic of interest, we will first gain an understanding of the basic processes in the absence of such concerns. The extension of the replacement process to more complex situations can be made later. This report will establish an overview of the on-line upgrade problem, and present a taxonomy of the various aspects of the replacement process.

Waldrop, Raymond S.↗

Advanced techniques in reliability model representation and solution

The current tendency of flight control system designs is towards increased integration of applications and increased distribution of computational elements. The reliability analysis of such systems is difficult because subsystem interactions are increasingly interdependent. Researchers at NASA Langley Research Center have been working for several years to extend the capability of Markov modeling techniques to address these problems. This effort has been focused in the areas of increased model abstraction and increased computational capability. The reliability model generator (RMG) is a software tool that uses as input a graphical object-oriented block diagram of the system. RMG uses a failure-effects algorithm to produce the reliability model from the graphical description. The ASSURE software tool is a parallel processing program that uses the semi-Markov unreliability range evaluator (SURE) solution technique and the abstract semi-Markov specification interface to the SURE tool (ASSIST) modeling language. A failure modes-effects simulation is used by ASSURE. These tools were used to analyze a significant portion of a complex flight control system. The successful combination of the power of graphical representation, automated model generation, and parallel computation leads to the conclusion that distributed fault-tolerant system architectures can now be analyzed.

Palumbo, Daniel L.↗

A reliable multicast for XTP

Multicast services needed for current distributed applications on LAN's fall generally into one of three categories: datagram, semi-reliable, and reliable. Transport layer multicast datagrams represent unreliable service in which the transmitting context 'fires and forgets'. XTP executes these semantics when the MULTI and NOERR mode bits are both set. Distributing sensor data and other applications in which application-level error recovery strategies are appropriate benefit from the efficiency in multidestination delivery offered by datagram service. Semi-reliable service refers to multicasting in which the control algorithms of the transport layer--error, flow, and rate control--are used in transferring the multicast distribution to the set of receiving contexts, the multicast group. The multicast defined in XTP provides semi-reliable service. Since, under a semi-reliable service, joining a multicast group means listening on the group address and entails no coordination with other members, a semi-reliable facility can be used for communication between a client and a server group as well as true peer-to-peer group communication. Resource location in a LAN is an important application domain. The term 'semi-reliable' refers to the fact that group membership changes go undetected. No attempt is made to assess the current membership of the group at any time--before, during, or after--the data transfer.

Dempsey, Bert J.↗

The use of mineral crystals as bio-markers in the search for life on Mars

It is proposed that minerals resulting from biologically controlled mineralization processes be utilized as biomarkers because of their favorable qualities. Universal signatures of life (biomarkers) are discussed in terms of their terrestrial forms and hypothetical Martian counterparts including organics, suites of specific inorganic and organic compounds, and isotopic ratios. It is emphasized that minerals produced under biologic control have morphological and isotopic compositions that are not found in their abiotic counterparts. Other biomarkers are not necessarily indicative of biological origin and are therefore unreliable resources for scientific study. Mineral crystals are also stable over long geological periods, and the minerals from Martian fluvial features can therefore be employed to search for fossils and biomarkers of early biological activity.

Schwartz, D. E.↗

Least reliable bits coding (LRBC) for high data rate satellite communications

LRBC, a bandwidth efficient multilevel/multistage block-coded modulation technique, is analyzed. LRBC uses simple multilevel component codes that provide increased error protection on increasingly unreliable modulated bits in order to maintain an overall high code rate that increases spectral efficiency. Soft-decision multistage decoding is used to make decisions on unprotected bits through corrections made on more protected bits. Analytical expressions and tight performance bounds are used to show that LRBC can achieve increased spectral efficiency and maintain equivalent or better power efficiency compared to that of BPSK. The relative simplicity of Galois field algebra vs the Viterbi algorithm and the availability of high-speed commercial VLSI for block codes indicates that LRBC using block codes is a desirable method for high data rate implementations.

Vanderaar, Mark↗

An evaluation of strategic behaviors in a high fidelity simulated flight task - Comparing primary performance to a figure of merit

The usual method of evaluating flight performance during a simulation is to collect as many primary performance measurements as possible. Then analyze all the measurements to find one sensitive to the manipulations imposed on the pilot during the scenario. Although this method can be useful, it is usually unreliable from one study to another. A simulation was conducted to test an integrated figure of merit (FOM) constructed using a standardized procedure. Pilots flew two full-mission scenarios in an instrument trainer with three degrees of motion freedom. The primary performance measurements selected assessed the pilot's performance in accuracy, smoothness, and activity. The results suggest that the integrated FOMs performed comparably to the primary performance measurements in determining which flight imposed the higher demands on the pilot. The standardized construction process allow adjustments to the FOM, so it can be used in different applications.

Bortolussi, Michael R.↗

Bypass transition in compressible boundary layers

Transition to turbulence in aerospace applications usually occurs in a strongly disturbed environment. For instance, the effects of free-stream turbulence, roughness and obstacles in the boundary layer strongly influence transition. Proper understanding of the mechanisms leading to transition is crucial in the design of aircraft wings and gas turbine blades, because lift, drag and heat transfer strongly depend on the state of the boundary layer, laminar or turbulent. Unfortunately, most of the transition research, both theoretical and experimental, has focused on natural transition. Many practical flows, however, defy any theoretical analysis and are extremely difficult to measure. Morkovin introduced in his review paper the concept of bypass transition as those forms of transition which bypass the known mechanisms of linear and non-linear transition theories and are currently not understood by experiments. In an effort to better understand the mechanisms leading to transition in a disturbed environment, experiments are conducted studying simpler cases, viz. the effects of free stream turbulence on transition on a flat plate. It turns out that these experiments are very difficult to conduct, because generation of free stream turbulence with sufficiently high fluctuation levels and reasonable homogeneity is non trivial. For a discussion see Morkovin. Serious problems also appear due to the fact that at high Reynolds numbers the boundary layers are very thin, especially in the nose region of the plate where the transition occurs, which makes the use of very small probes necessary. The effects of free-stream turbulence on transition are the subject of this research and are especially important in a gas turbine environment, where turbulence intensities are measured between 5 and 20 percent, Wang et al. Due to the fact that the Reynolds number for turbine blades is considerably lower than for aircraft wings, generally a larger portion of the blade will be in a laminar transitional state. The effects of large free stream turbulence in compressible boundary layers at Mach numbers are examined both in the subsonic and transonic regime using direct numerical simulations. The flow is computed over a flat plate and curved surface. while many applications operate in the transonic regime. Due the nature of their numerical scheme, a non-conservation formulation of the Navier-Stokes equations, it is a non-trivial extension to compute flow fields in the transonic regime. This project aims at better understanding the effects of large free-stream turbulence in compressible boundary layers at mach number both in the subsonic and transonic regime using direct numerical simulations. The present project aims at computing the flow over a flat plate and curved surface. This research will provide data which can be used to clarify mechanisms leading to transition in an environment with high free stream turbulence. This information is useful for the development of turbulence models, which are of great importance for CFD applications, and are currently unreliable for more complex flows, such as transitional flows.

Vandervegt, J. J.↗

Approximation methods for stochastic petri nets

Stochastic Marked Graphs are a concurrent decision free formalism provided with a powerful synchronization mechanism generalizing conventional Fork Join Queueing Networks. In some particular cases the analysis of the throughput can be done analytically. Otherwise the analysis suffers from the classical state explosion problem. Embedded in the divide and conquer paradigm, approximation techniques are introduced for the analysis of stochastic marked graphs and Macroplace/Macrotransition-nets (MPMT-nets), a new subclass introduced herein. MPMT-nets are a subclass of Petri nets that allow limited choice, concurrency and sharing of resources. The modeling power of MPMT is much larger than that of marked graphs, e.g., MPMT-nets can model manufacturing flow lines with unreliable machines and dataflow graphs where choice and synchronization occur. The basic idea leads to the notion of a cut to split the original net system into two subnets. The cuts lead to two aggregated net systems where one of the subnets is reduced to a single transition. A further reduction leads to a basic skeleton. The generalization of the idea leads to multiple cuts, where single cuts can be applied recursively leading to a hierarchical decomposition. Based on the decomposition, a response time approximation technique for the performance analysis is introduced. Also, delay equivalence, which has previously been introduced in the context of marked graphs by Woodside et al., Marie's method and flow equivalent aggregation are applied to the aggregated net systems. The experimental results show that response time approximation converges quickly and shows reasonable accuracy in most cases. The convergence of Marie's method and flow equivalent aggregation are applied to the aggregated net systems. The experimental results show that response time approximation converges quickly and shows reasonable accuracy in most cases. The convergence of Marie's is slower, but the accuracy is generally better. Delay equivalence often fails to converge, while flow equivalent aggregation can lead to potentially bad results if a strong dependence of the mean completion time on the interarrival process exists.

Jungnitz, Hauke Joerg↗

Reliability of solid rocket motor cases and nozzles

A recent article in Aerospace America claims that 'the average success ratio of the current U.S. stable of launch vehicles, including upper stages, is about 92 percent (without upper stages it is close to 95 percent). The 8 percent failure probability implies an expected loss of $12M per flight, not including the lost opportunity costs'. Since payload costs are likely to be much greater than launch costs and even more so for the new launch vehicles for the Advanced Launch Development Program (ALDP), the cost of rocket motor unreliability at the current 8 percent rate can run into billions of dollars if expected increases in demand are realized. At an 8 percent failure rate, it is extremely unlikely that failure will occur during the first few ground tests of a new system. At that time, most of the design, analysis and tooling costs of the program have not expended. Since most systems are expected to be used ten to a hundred or more times, the likelihood of one or more failures is very large, and it can be expected that the above losses will be realized in the future. This will occur unless the problems are addressed and remedied. Recent trends suggest the problem is not being addressed adequately.

Crose, James G.↗

Solid Propulsion Integrity Program (SPIP) for verifiable enhanced solid rocket motor reliability

To increase the success rate of U.S. built Rocket Motors (SRM), the approach taken is: (1) set common reliability goals for nozzles, cases, bondline, propellant, and insulation; (2) build a common engineering data base to support standard industry-wide reliability assessment models; (3) structure or enhance existing industry/government/user term to develop the tools, methods needed, and the data to support them; and (4) areas where unreliabilities are found must be improved.

Butler, Barry L.↗

Driving a car with custom-designed fuzzy inferencing VLSI chips and boards

Vehicle control in a-priori unknown, unpredictable, and dynamic environments requires many calculational and reasoning schemes to operate on the basis of very imprecise, incomplete, or unreliable data. For such systems, in which all the uncertainties can not be engineered away, approximate reasoning may provide an alternative to the complexity and computational requirements of conventional uncertainty analysis and propagation techniques. Two types of computer boards including custom-designed VLSI chips were developed to add a fuzzy inferencing capability to real-time control systems. All inferencing rules on a chip are processed in parallel, allowing execution of the entire rule base in about 30 microseconds, and therefore, making control of 'reflex-type' of motions envisionable. The use of these boards and the approach using superposition of elemental sensor-based behaviors for the development of qualitative reasoning schemes emulating human-like navigation in a-priori unknown environments are first discussed. Then how the human-like navigation scheme implemented on one of the qualitative inferencing boards was installed on a test-bed platform to investigate two control modes for driving a car in a-priori unknown environments on the basis of sparse and imprecise sensor data is described. In the first mode, the car navigates fully autonomously, while in the second mode, the system acts as a driver's aid providing the driver with linguistic (fuzzy) commands to turn left or right and speed up or slow down depending on the obstacles perceived by the sensors. Experiments with both modes of control are described in which the system uses only three acoustic range (sonar) sensor channels to perceive the environment. Simulation results as well as indoors and outdoors experiments are presented and discussed to illustrate the feasibility and robustness of autonomous navigation and/or safety enhancing driver's aid using the new fuzzy inferencing hardware system and some human-like reasoning schemes which may include as little as six elemental behaviors embodied in fourteen qualitative rules.

Pin, Francois G.↗

The asymptotic spectra of banded Toeplitz and quasi-Toeplitz matrices

Toeplitz matrices occur in many mathematical, as well as, scientific and engineering investigations. This paper considers the spectra of banded Toeplitz and quasi-Toeplitz matrices with emphasis on non-normal matrices of arbitrarily large order and relatively small bandwidth. These are the type of matrices that appear in the investigation of stability and convergence of difference approximations to partial differential equations. Quasi-Toeplitz matrices are the result of non-Dirichlet boundary conditions for the difference approximations. The eigenvalue problem for a banded Toeplitz or quasi-Toeplitz matrix of large order is, in general, analytically intractable and (for non-normal matrices) numerically unreliable. An asymptotic (matrix order approaches infinity) approach partitions the eigenvalue analysis of a quasi-Toeplitz matrix into two parts, namely the analysis for the boundary condition independent spectrum and the analysis for the boundary condition dependent spectrum. The boundary condition independent spectrum is the same as the pure Toeplitz matrix spectrum. Algorithms for computing both parts of the spectrum are presented. Examples are used to demonstrate the utility of the algorithms, to present some interesting spectra, and to point out some of the numerical difficulties encountered when conventional matrix eigenvalue routines are employed for non-normal matrices of large order. The analysis for the Toeplitz spectrum also leads to a diagonal similarity transformation that improves conventional numerical eigenvalue computations. Finally, the algorithm for the asymptotic spectrum is extended to the Toeplitz generalized eigenvalue problem which occurs, for example, in the stability of Pade type difference approximations to differential equations.

Beam, Richard M.↗

Study of basic physical processes in liquid and solid rocket propulsion

A process model was developed to assess the suitability of new/modified technologies and subsystems for application to commercial launch vehicles. Suitability is measured in terms of cost, safety, and environmental impact. Cost is related to recurring production and operational cost per flight, amortization of non-recurring development costs, 'effective' cost of difference in payload capability, and the cost of unreliability. The process is also applicable for assessing technologies and subsystems for application to other launch vehicles. The process will enable a comprehensive systems engineering approach to assess the potential of technologies and subsystems for launch vehicle applications and to provide documentation of the results for application to technology planning for the future.

Monroe, Joseph W.↗

Inverse problems: Fuzzy representation of uncertainty generates a regularization

In many applied problems (geophysics, medicine, and astronomy) we cannot directly measure the values x(t) of the desired physical quantity x in different moments of time, so we measure some related quantity y(t), and then we try to reconstruct the desired values x(t). This problem is often ill-posed in the sense that two essentially different functions x(t) are consistent with the same measurement results. So, in order to get a reasonable reconstruction, we must have some additional prior information about the desired function x(t). Methods that use this information to choose x(t) from the set of all possible solutions are called regularization methods. In some cases, we know the statistical characteristics both of x(t) and of the measurement errors, so we can apply statistical filtering methods (well-developed since the invention of a Wiener filter). In some situations, we know the properties of the desired process, e.g., we know that the derivative of x(t) is limited by some number delta, etc. In this case, we can apply standard regularization techniques (e.g., Tikhonov's regularization). In many cases, however, we have only uncertain knowledge about the values of x(t), about the rate with which the values of x(t) can change, and about the measurement errors. In these cases, usually one of the existing regularization methods is applied. There exist several heuristics that choose such a method. The problem with these heuristics is that they often lead to choosing different methods, and these methods lead to different functions x(t). Therefore, the results x(t) of applying these heuristic methods are often unreliable. We show that if we use fuzzy logic to describe this uncertainty, then we automatically arrive at a unique regularization method, whose parameters are uniquely determined by the experts knowledge. Although we start with the fuzzy description, but the resulting regularization turns out to be quite crisp.

Kreinovich, V.↗

Optical transients and depth analysis

Flaws of the depth analysis technique of distinguishing photographic plate defects are discussed. The method is shown to be unreliable in confirming or disproving the astrophysical nature of optical transients. The arguments of Greiner and of Zytkow to the contrary are criticized.

Schaefer, Bradley E.↗

On the location of the oscillations in AE Aquarii

There is much recent interest on the nature of the oscillations in the cataclysmic variable AE Aquarii. Detected in the optical, UV, X-ray, and possibly gamma-ray bands, the origin of these 33-sec oscillations remains poorly understood; the oscillation time-delay curve is phase shifted by about 60 deg with respect to the emission-line radial velocity curve, although both should track the orbital motion of the white dwarf. We present simultaneous absorption and emission-line radial velocities, and from the absorption lines we derive an improved ephemeris. Our emission-line velocities are phase shifted by about 75 deg, and hence are unreliable tracers of the orbital motion of the white dwarf. However, the oscillation orbit is shifted by only 5 deg +/- 3 deg percent confirming that the oscillations arise from a region concentric with the white dwarf. Thus the arrival times of the oscillations yield a measure of the white dwarfs apparent orbital velocity, independent of emission-line radial velocity measurements.

Welsh, William F.↗