SEARCH · Engineering Papers
Results for “transit”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Cooperative Gas Adsorption without a Phase Transition in Metal-Organic Frameworks
Cooperative adsorption of gases by porous frameworks, which permits more efficient uptake and removal than the more usual noncooperative (Langmuir-type) adsorption, usually results from a phase transition of the framework. Here in this paper, we show how cooperativity emerges in the class of metal-organic frameworks mmen-M 2 (dobpdc) in the absence of a phase transition. Our study provides a microscopic understanding of the emergent features of cooperative binding, including the position, slope, and height of the isotherm step, and indicates how to optimize gas storage and separation in these materials.
Revealing the Nature of the Ultrafast Magnetic Phase Transition in Ni by Correlating Extreme Ultraviolet Magneto-Optic and Photoemission Spectroscopies
By correlating time- and angle-resolved photoemission and time-resolved transverse- magnetooptical Kerr effect measurements, both at extreme ultraviolet wavelengths, we uncover the universal nature of the ultrafast photoinduced magnetic phase transition in Ni. This allows us to explain the ultrafast magnetic response of Ni at all laser fluences - from a small reduction of the magnetization at low laser fluences, to complete quenching at high laser fluences. In this work, both probe methods exhibit the same demagnetization and recovery timescales. The spin system absorbs the energy required to proceed through a magnetic phase transition within 20 fs after the peak of the pump pulse. However, the spectroscopic signatures of demagnetization of the material appear only after ≈ 200 fs, and subsequent recovery of the magnetization on timescales ranging from 500 fs to >70 ps. We also provide evidence of two competing channels with two distinct timescales in the recovery process, that suggest the presence of coexisting phases in the material.
Irradiation-driven amorphous-to-glassy transition in quartz: The crucial role of the medium-range order in crystallization
Noncrystalline solids can be classified into glassy and amorphous, wherein glasses and amorphous solids relax toward the supercooled liquid and crystalline states upon heating, respectively. However, the structural origin of such distinction remains unknown. Here in this study, based on molecular-dynamics simulations of irradiation-induced disordering of α-quartz, we demonstrate the existence of an amorphous-to-glassy transition. We show that the transition to the glassy state originates from the appearance of structural defects within the medium-range order of the atomic network. Such defects arise from the percolation of short-range defects and kinetically prevent crystallization. Overall, this suggests that the propensity of a disordered system for crystallization is controlled by the similarity between its medium-range order and that of the isochemical crystal.
Intrinsic insulating ground state in transition metal dichalcogenide TiSe[subscript 2]
Abstract not provided
Tunable intrinsic strain in two-dimensional transition metal electrocatalysts
Tuning surface strain is a powerful strategy for tailoring the reactivity of metal catalysts. Traditionally, surface strain is imposed by external stress from a heterogeneous substrate, but the effect is often obscured by interfacial reconstructions and nanocatalyst geometries. Here, we report on a strategy to resolve these problems by exploiting intrinsic surface stresses in two-dimensional transition metal nanosheets. Density functional theory calculations indicate that attractive interactions between surface atoms lead to tensile surface stresses that exert a pressure on the order of 10 5 atmospheres on the surface atoms and impart up to 10% compressive strain, with the exact magnitude inversely proportional to the nanosheet thickness. Atomic-level control of thickness thus enables generation and fine-tuning of intrinsic strain to optimize catalytic reactivity, which was confirmed experimentally on Pd(110) nanosheets for the oxygen reduction and hydrogen evolution reactions, with activity enhancements that were more than an order of magnitude greater than those of their nanoparticle counterparts.
Anomalous absorption of electromagnetic waves by 2D transition metal carbonitride Ti 3 CNT x (MXene)
Lightweight, ultrathin, and flexible electromagnetic interference (EMI) shielding materials are needed to protect electronic circuits and portable telecommunication devices and to eliminate cross-talk between devices and device components. Here, we show that a two-dimensional (2D) transition metal carbonitride, Ti 3 CNT x MXene, with a moderate electrical conductivity, provides a higher shielding effectiveness compared with more conductive Ti 3 C 2 T x or metal foils of the same thickness. This exceptional shielding performance of Ti 3 CNT x was achieved by thermal annealing and is attributed to an anomalously high absorption of electromagnetic waves in its layered, metamaterial-like structure. These results provide guidance for designing advanced EMI shielding materials but also highlight the need for exploring fundamental mechanisms behind interaction of electromagnetic waves with 2D materials.
Spatiotemporal characterization of the field-induced insulator-to-metal transition
Watching a metal filament grow Resistive switching is a process in which the electrical resistance of a sample changes abruptly in response to a voltage pulse, often by orders of magnitude. This process is at the heart of many neuromorphic computing approaches but visualizing it in both space and time is tricky. del Valle et al . monitored the resistive switching in three different vanadium oxide compounds by measuring time- and space-resolved optical reflectivity (see the Perspective by Hilgenkamp and Gao). A characteristic conducting filament was quickly nucleated on the inhomogeneities in the sample and then propagated due to Joule heating. —JS
Thermally induced order–disorder transition in crystals of lithium complexes of 1,5-Bis[2-(diphenylphosphorylmethyl)phenoxy]-3-oxapenthane [LiL](ClO{sub 4}) and [LiL](NCS): Effect of the anion on the temperature of transition
Compounds of 1,5-bis[2-(diphenylphosphorylmethyl)phenoxy]-3-oxapenthane (L) with lithium salts LiXL, where Х{sup –} = ClO{sub 4}, NCS, or I, and LiBrL ⋅ 2H{sub 2}O, are synthesized. The IR spectra and the thermal behavior of complexes are studied. X-ray diffraction studies of isostructural [LiL](ClO{sub 4}) (I) and [LiL](NCS) (II) crystals are performed. In the [LiL]{sup +} complex, the ligand coordinates the Li atom by five O atoms, forming an environment in the shape of a trigonal bipyramid [in II at 174 K, the Li–O bonds are1.829(3)–2.341(3) Å]. It is found that crystals I and II undergo a reversible phase transition of the order–disorder type with the change of symmetry (P2{sub 1}/n ↔ P1̄). The temperatures of transition of crystals I and II differ by ~70°. This distinction is explained by different types of disordering of the phenyl rings of the L ligand in the monoclinic phase, namely, dynamic in I and static in II. The analysis of intermolecular contacts allows one to relate the state of disordering of ligand L in the crystal to the strength of its interactions with the anion: in II the NCS{sup –} anion is firmly fixed by the С–Н···S and С–Н···N hydrogen bonds (at 174 K, H···S is 2.77 and H···N is 2.36 Å); in I the С–Н···О interactions of the ClO4̄ anion with the ligand are weaker (at 215 K, Н···О ≥ 2.37 Å) and the anion is disordered.
Solid–Liquid Phase Transition in the Octadecanoic Acid Film Adsorbed on the Toluene–Water Interface
The structure of the soluble protonated (pH = 2) octadecanoic acid film adsorbed on the saturated hydrocarbon (n-hexane)–water and aromatic hydrocarbon (toluene)–water interfaces is studied by X-ray reflectometry using synchrotron radiation. The experimental data demonstrate that a solid phase of a Gibbs monolayer 26 ± 1 Å thick, in which aliphatic tails are perpendicular to the surface and the area per molecule is A = 18 ± 2 Å{sup 2}, is formed in the film at the n-hexane–water interface. The solid monolayer on the toluene–water interface in the adsorbed film melts when temperature increases, and this transition is caused by disordering of the hydrocarbon tails of the acid. During the solid–liquid transition, the Gibbs monolayer thickness remains almost the same, 22 ± 1 Å. In the solid phase, we have A = 20 ± 2 Å{sup 2}, and the angle of deviation of the molecular tails from the normal to the surface is about 30°. The density of the liquid monolayer phase with A = 24 ± 2 Å{sup 2} corresponds to liquid n-octadecane.
An Analysis of the Processes Affecting Rapid Near-Surface Water Vapor Increases during the Afternoon to Evening Transition in Oklahoma
Abstract This study used 20 years of Oklahoma Mesonet data to investigate the changes of near-surface water vapor mixing ratio qυ during the afternoon to evening transition (AET). Similar to past studies, increases in qυ are found to occur near sunset. However, the location, magnitude, and timing of the qυ maximum occurring during the AET are shown to be dependent on the seasonal growth and harvest of vegetation across Oklahoma in the spring and summer months. Particularly, the late spring harvest of winter wheat grown in Oklahoma appears to modify the relative contribution of local and nonlocal processes on qυ. By analyzing time series of qυ during the AET, it is found that the likelihood of a presunset qυ maximum is strongly dependent upon vegetation, soil moisture, wind speed, and cloud cover. Analysis also reveals that the increase in qυ during the AET can increase the parcel conditional instability despite the surface cooling produced by loss of insolation. Next to known changes in low-level wind shear, these changes in instability and moisture demonstrate new ways the AET can modify the presence of the key ingredients relevant to explaining the climatological increase in severe convective storm hazards around sunset.
Cloud, Aerosol and Boundary Layer Structure across the Northeast Pacific Stratocumulus-Cumulus Transition as observed during CSET
During the Cloud System Evolution in the Trades (CSET) field study, 14 research flights of the National Science Foundation G-V sampled the stratocumulus-cumulus transition between Northern California and Hawaii and its synoptic variability. The G-V made vertically resolved measurements of turbulence, cloud microphysics, aerosol characteristics, and trace gases. It also carried dropsondes and a vertically pointing W-band radar and lidar. This paper summarizes these observations with the goals of fostering novel comparisons with theory, models and reanalyses, and satellite-derived products. A longitude-height binning and compositing strategy mitigates limitations of sparse sampling and spatiotemporal variability. Typically, a 1-km-deep decoupled stratocumulus-capped boundary layer near California evolved into 2-km-deep precipitating cumulus clusters surrounded by patches of thin stratus that dissipated toward Hawaii. Low cloud cover was correlated with estimated inversion strength more than with cloud droplet number, even though the thickest clouds were generally precipitating and ultraclean layers indicative of aerosol-cloud-precipitation interaction were common west of 140 degrees W. Accumulation-mode aerosol concentration correlated well with collocated cloud droplet number concentration and was typically largest near the surface. Aitken mode aerosol concentration was typically larger in the free troposphere. Wildfire smoke produced spikes of aerosol and trace gases on some flights. CSET data are compared with space-time collocated output from MERRA-2 reanalysis and from the CAM6 climate model run with winds and temperature nudged toward this reanalysis. The reanalysis compares better with the observed relative humidity than does nudged CAM6. Both vertically diffuse the stratocumulus cloud layer versus observations. MERRA-2 slightly underestimates in situ carbon monoxide measurements and underestimates ozone depletion within the boundary layer.
Data for Propagation Method and Planting Density Influence Canopy Developmental Transition and Biomass Productivity in Miscanthus × giganteus
Understanding how establishment practices influence the mechanisms underlying Miscanthus × giganteus (miscanthus) productivity and canopy development is critical for optimizing management. Data was collected during the juvenile (2011–2013) and mature (2024) phases of a long-term field experiment established in Urbana, Illinois, to evaluate the effects of propagation method (plug propagation [PP] and rhizome propagation [RP]), planting density (1.0, 0.75, and 0.25 plants m⁻²), and nitrogen application (0 and 67 kg N ha⁻¹) on end-of-season biomass yield, tiller mass, tiller density, and tiller height. Linear regression models identified the dominant predictors of yield across stand ages and management regimes. Planting density, nitrogen (N) application, and propagation method significantly influenced early yield and canopy development. During the juvenile phase, biomass yield was driven by tiller density due to canopy expansion; in the mature phase, yield became driven by tiller mass. The PP plots produced higher tiller density than the RP plots, resulting in faster canopy closure and higher juvenile-phase yields. Rhizome-propagated (RP) plots produced lower tiller density, but individual tillers were 3.3–6.4 g tiller−1 heavier than PP tillers. After the canopy reached equilibrium, the PP and RP yields were similar because greater RP tiller mass compensated for its lower tiller density. Higher planting density resulted in greater yield and tiller density during the second year (2012), but this effect was absent from the third year (2013) onward. In the juvenile phase, N fertilization enhanced yield by 1.6–3.4 Mg ha−1. Initiating fertilization in 2013 on unfertilized plots produced biomass similar to that in fertilized plots, suggesting yield recovery in the mature phase. These findings revealed that establishment strategies, including propagation method and planting density, influence juvenile miscanthus canopy development and productivity, transitioning from tiller-density- to mass-dominated yields, but not mature phase productivity.
Natural Gas Regulation in Transition: The Effects of Geopolitics and Prerequisites for Change in Transition Economies
Natural gas has become a major geopolitical concern in relations among transition countries and other European states. Transition economies have embarked on very different paths in using and regulating natural gas. Countries to the East, like Russia, by and large have undertaken few market-oriented reforms of their natural gas sectors. The new European Union member states have undertaken much broader reforms. These differences often lead to tension. Two factors seem particularly important in understanding when countries may embark on natural gas reforms. The first is energy efficiency, since low energy efficiency can make energy reforms socially and economically difficult. The second is corruption: vested interested and a captive state can play powerful roles in inhibiting reform. The article looks at the arguments behind each of these potential prerequisites for reform, and also examines comparative data on energy intensity and corruption. Interestingly, the countries with the lowest energy intensity and the lowest levels of corruption (and the fastest improvements in these areas) also undertook the most extensive natural gas reforms. The article concludes with a few brief examples of the cost with the status quo.
Glass structure and crystallization in boro-alumino-silicate glasses containing rare earth and transition metal cations: a US-UK collaborative program
Nuclear wastes generated from reprocessing of used nuclear fuel tend to contain a large fraction of rare earth (RE, e.g., Nd3+), transition (TM, e.g., Mo6+, Zr4+), alkali (A, e.g., Cs+), and alkaline earth cations (AE, e.g., Ba2+, Sr2+). Various strategies have been considered for immobilizing such waste streams, varying from nominally crystal-free glass to glass-ceramic to multi-phase ceramic waste forms. For glass and glass-ceramic waste forms, the added glass-forming system is generally alkali-alkaline earth-aluminoborosilicate (i.e., Na-Ca-Al-B-Si oxide). In a US-UK collaborative project, summarized here, we investigated the glass structure and crystallization dependence on compositional changes in simulated nuclear waste glasses and glass-ceramics. Compositions ranged in complexity from five – to – eight oxides. Specifically, the roles of Mo and rare earths are investigated, since a proposed glass-ceramic waste form contains crystalline phases such as powellite [(AE,A,RE)MoO4] and oxyapatite [(RE,AE,A)10Si6O26], and the precipitation of molybdenum phases is known to be affected by the rare earth concentration in the glass. Additionally, the effects of other chemical additions have been systematically investigated, including Zr, Ru, P, and Ti. A series of studies were also undertaken to ascertain the effect of the RE size on glass structure and on partitioning to crystal phases, investigating similarities and differences in glasses containing single RE oxides of Sc, Y, La, Ce, Nd, Sm, Er, Yb, or Lu. Finally, the effect of charge compensation was investigated by considering not only the commonly assessed peralkaline glass but also metaluminous and peraluminous compositions. Glass structure and crystallization studies were conducted by spectroscopic methods (i.e., Raman, X-ray absorption, nuclear magnetic resonance (NMR), optical absorption, photoluminescence, photoluminescence excitation, X-ray photoelectron spectroscopy), microscopy (i.e., scanning electron microscopy, transmission electron microscopy, electron probe microanalysis), scattering (i.e., X-ray and neutron diffraction, small angle measurements), and physical characterization (i.e., differential thermal analysis, liquidus, viscosity, density). This paper will give an overview of the research program and some example unpublished results on glass-ceramic crystallization kinetics, microstructure, and Raman spectra, as well as some examples of the effects of rare earths on the absorption, luminescence, and NMR spectra of starting glasses. The formal collaboration described here has resulted in the generation of a large number of results, some of which are still in the process of being published as separate studies.
Critical Review of Platinum Group Metal-Free Materials for Water Electrolysis: Transition from the Laboratory to the Market : Earth-abundant borides and phosphides as catalysts for sustainable hydrogen production
To combat the global problem of carbon dioxide emissions, hydrogen is the desired energy vector for the transition to environmentally benign fuel cell power. Water electrolysis (WE) is the major technology for sustainable hydrogen production. Despite the use of renewable solar and wind power as sources of electricity, one of the main barriers for the widespread implementation of WE is the scarcity and high cost of platinum group metals (pgms) that are used to catalyse the cathodic hydrogen evolution reaction (HER) and the anodic oxygen evolution reaction (OER). Hence, the critical pgm-based catalysts must be replaced with more sustainable alternatives for WE technologies to become commercially viable. This critical review describes the state-of-the-art pgm-free materials used in the WE application, with a major focus on phosphides and borides. Several emerging classes of HER and OER catalysts are reviewed and detailed structure-property correlations are comprehensively summarised. The influence of the crystallographic and electronic structures, morphology and bulk and surface chemistry of the catalysts on the activity towards OER and HER is discussed.
Universal Passive Synchronization Method for Grid-Forming Inverters Without Mode Transition
Power systems are transforming with increasing levels of inverter-based resources (IBRs). This transformation requires critical roles of grid-forming (GFM) inverters replacing synchronous generators for bulk power system stabilization and ancillary services, also allowing flexible power system operation, such as microgrid that is operated by multiple GFM IBRs to achieve system resilience against contingencies. To realize the resilient power systems allowing flexible in-and-out operation of GFM IBRs potentially programmed with different primary controls, a synchronization method universally applicable, i.e., independent of control types, would be beneficial to ease the integration process, but it has not been actively studied. To fill the gap, this paper proposes a universal synchronization method that achieves a passive synchronization to enable a smooth transition in a grid with off-nominal system parameters, i.e., voltage and frequency. The logic proposed requires no modification on the primary control, thus applicable to any type of GFMs with a voltage reference input. To validate the concept, a simulation of an IEEE 13-bus benchmark system modified with 3 GFM inverters is presented. It simulates an inverter-driven black start scenario in which GFM inverters autonomously turn on and connect to the grid under heavy loading, using the synchronization logic. The case study demonstrates that GFM inverters can tune their voltage reference to smoothly synchronize without severe transients, and contribute to a seamless black start of the grid under unbalanced load conditions. Two GFM methods - Droop and dispatchable virtual oscillator control - are used for the demo to validate feasibility and interoperability of the passive synchronization.
Phase Transitions in Amorphous Germanium under Non-Hydrostatic Compression
As the pioneer semiconductor in transistor, germanium (Ge) has been widely applied in information technology for over half a century. Although many phase transitions in Ge have been reported, the complicated phenomena of the phase structures in amorphous Ge under extreme conditions are still not fully investigated. Here, we report the different routes of phase transition in amorphous Ge under different compression conditions utilizing diamond anvil cell (DAC) combined with synchrotron-based X-ray diffraction (XRD) and Raman spectroscopy techniques. Upon non-hydrostatic compression of amorphous Ge, we observed that shear stress facilitates a reversible pressure-induced phase transformation, in contrast to the pressure-quenchable structure under a hydrostatic compression. These findings afford better understanding of the structural behaviors of Ge under extreme conditions, which contributes to more potential applications in the semiconductor field.