Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “time dependent behavior”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

A numerical model for dynamic wave rotor analysis

A numerical model has been developed which can predict the dynamic (and steady state) performance of a wave rotor, given the geometry and time dependent boundary conditions. The one-dimensional, perfect gas, CFD based code tracks the gasdynamics in each of the wave rotor passages as they rotate past the various ducts. The model can operate both on and off-design, allowing dynamic behavior to be studied throughout the operating range of the wave rotor. The model accounts for several major loss mechanisms including finite passage opening time, fluid friction, heat transfer to and from the passage walls, and leakage to and from the passage ends. In addition, it can calculate the amount of work transferred to and from the fluid when the flow in the ducts is not aligned with the passages such as occurs in off-design operation. Since it is one-dimensional, the model runs reasonably fast on a typical workstation. This paper will describe the model and present the results of some transient calculations for a conceptual four port wave rotor designed as a topping cycle for a small gas turbine engine.

Paxson, D. E.↗
DOE OSTI2021

First-principles modeling of plasmons in aluminum under ambient and extreme conditions

The theoretical understanding of plasmon behavior is crucial for an accurate interpretation of inelastic scattering diagnostics in many experiments. In this work, we highlight the utility of linear response time-dependent density functional theory (LR-TDDFT) as a first-principles framework for consistently modeling plasmon properties. We provide a comprehensive analysis of plasmons in aluminum from ambient to warm dense matter conditions and assess typical properties such as the dynamical structure factor, the plasmon dispersion, and the plasmon lifetime. We compare our results with scattering measurements and with other TDDFT results as well as models such as the random phase approximation, the Mermin approach, and the dielectric function obtained using static local field corrections of the uniform electron gas parametrized from path-integral Monte Carlo simulations. We conclude that results for the plasmon dispersion and lifetime are inconsistent between experiment and theories and that the common practice of extracting and studying plasmon dispersion relations is an insufficient procedure to capture the complicated physics contained in the dynamic structure factor in its full breadth.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Memory effect and phase transition in a hierarchical trap model for spin glasses

Here, we introduce an efficient dynamical tree method that enables us to explicitly demonstrate the thermoremanent magnetization memory effect in a hierarchical energy landscape. Our simulation nicely reproduces the nontrivial waiting-time and waiting-temperature dependences in this nonequilibrium phenomenon. We further investigate the condensation effect, in which a small set of microstates dominates the thermodynamic behavior in the multilayer trap model. Importantly, a structural phase transition of the multilayer tree model is shown to coincide with the onset of the condensation phenomenon. Our results underscore the importance of hierarchical structure and demonstrate the intimate relation between the glassy behavior and structure of barrier trees.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Performance Evaluation and Optimal Design Analysis of Continuous-Operation Solar-Driven Cooling Absorption Systems With Thermal Energy Storage

A solar absorption cooling system consisting of a flat plate collector, thermal energy storage tank, and absorption chiller is analyzed in this work. A dimensionless model is developed from the energy balance on each component and the chiller's characteristic performance curves. The model is used to determine the interaction and influence of different parameters such as tank size, solar collector area, chiller size, cooling load, cooling temperature, heat loss, and mass flow rates on the performance. From the analysis, smaller solar collector areas are required for lower cooling loads and smaller tank volumes. A specific cooling load of 1 x 10^-5 will require a specific solar collector area between two and six times larger, depending on the initial tank temperature, than the area required for a baseline system that considers typical commercial design and operation parameters. A similar behavior was observed for the specific tank volume. For the baseline system, the minimum specific area of the collector of 9.57 is achieved for an initial tank temperature of 1.19. For a cooling load of 1 x 10^-5, the optimum initial tank temperature will be 1.11 that results in a minimum specific solar collector area of 25.26. A specific tank volume of 4 x 10^-4 will also have an optimum initial tank temperature of 1.11 that minimizes the specific solar collector area to a value of 28.18. The approach and analysis in this work can be used to determine design parameters for solar absorption cooling systems based on a proper relation among system's dimensions to achieve optimum operation.

cooling load↗
NASA NTRS1988

Temperature Fluctuations During Crystal Growth

Technique developed to deconvolve period and relative amplitude of fluctuations of heat flow inBridgman crystal growth. Temperature-measuring device with enough sensitivity and frequency response to make desired measurements inserted close as possible to substance monitored. Time-dependent temperature response recorded, and time domain response converted to frequency domain for further analysis. Fast fourier transform (FFT) of data on temperature oscillations shows particular behavior at some specific frequencies corresponding with striations, or defects observed on crystal. Useful procedure to help determine sources of some growth-induced crystalline defects. Other processes sensitive to small temperature fluctuations, such as diffusion, precipitation, and corrsion, benefit from technique.

Fripp, Archibald L., Jr.↗
NASA NTRS1996

Deformation of Fluid Column by Action of Axial Vibration and Some Aspects of High-Rate Thermocapillary Convection

The deformation of the fluid column by an action of a low-frequency vibration is considered. It is shown that behavior of the free fluid surface depends on the frequency of applied vibration and its amplitude. In the area of very low frequencies when fluid has time to comment on travel of bounding solid walls limiting column, the harmonical oscillations of free surface with given frequency are observed. With increase of vibration frequency the steady-state relief on free fluid surface is formed. If the amplitude of vibration is very small and the frequency corresponding to the first peak in the vibration spectrum on the Mir orbital station, the deformation of free surface tends to zero. Fluid flow induced thermocapillary effect on deformed free surface is more unstable as in the case of smooth cylindrical surface. It was shown that width of heating zone affects very essentially the flow pattern and transition to oscillatory regime of thermocapillary convection.

Feonychev, Alexander I.↗
NASA NTRS1995

Bend stress relaxation and tensile primary creep of a polycrystalline alpha-SiC fiber

Understanding the thermomechanical behavior (creep and stress relaxation) of ceramic fibers is of both practical and basic interest. On the practical level, ceramic fibers are the reinforcement for ceramic matrix composites which are being developed for use in high temperature applications. It is important to understand and model the total creep of fibers at low strain levels where creep is predominantly in the primary stage. In addition, there are many applications where the component will only be subjected to thermal strains. Therefore, the stress relaxation of composite consituents in such circumstances will be an important factor in composite design and performance. The objective of this paper is to compare and analyze bend stress relaxation and tensile creep data for alpha-SiC fibers produced by the Carborundum Co. (Niagara Falls, NY). This fiber is of current technical interest and is similar in composition to bulk alpha-SiC which has been studied under compressive creep conditions. The temperature, time, and stress dependences will be discussed for the stress relaxation and creep results. In addition, some creep and relaxation recovery experiments were performed in order to understand the complete viscoelastic behavior, i.e. both recoverable and nonrecoverable creep components of these materials. The data will be presented in order to model the deformation behavior and compare relaxation and/or creep behavior for relatively low deformation strain conditions of practical concern. Where applicable, the tensile creep results will be compared to bend stress relaxation data.

Hee Man, Yun↗
NASA NTRS1975

Experimental and Theoretical Studies of Pulsating Turbulent Flow

The objective of this investigation was to study the effects of small amplitude sinusoidal pulsations on fully developed turbulent flow in a tube from both experimental and theoretical viewpoints. Theoretical models for the macroscopic behavior of pulsating turbulent tube flow were developed for the two cases of very low and very high pulsation frequencies. The models are based on assumptions of quasi-steady and frozen eddy viscosity flow behavior, respectively. The models successfully predict unsteady velocity profiles, thereby supporting the currently proposed definitions of frequency regimes in pulsating turbulent flow. Experimental measurements were made of the time-dependent pressure drop and velocity profiles over the range of frequency-to-Reynolds number ratios from 0.0095 to 0.24. The two macroscopic models developed in this study predict unsteady velocity profiles which are in moderately good agreement with the experiments in their respective frequency regimes, and a previously developed quasi-steady model is found to predict experimental velocity profiles well in both the quasisteady and the frozen eddy viscosity frequency regimes. The effect of flow pulsations on the dissipation of turbulence energy in the vicinity of the wall was measured in the lower transition frequency regime. The long-time averaged dissipation was observed to be unchanged from the steady flow dissipation, within the accuracy of the experiment. A theoretical model of the periodic viscous sublayer was also developed and applied to pulsating flow in a tube, in order to investigate the effects of flow pulsations on the rate of production of turbulence in the region of the wall. The periodic viscous sublayer model predicts sublayer growth periods in steady flow which agree with the published experimental data. When the model is applied to pulsating flow, the response of the sublayer growth period falls into three frequency regimes, the parameters of which are in approximate agreement with the frequency regimes which are defined on the basis of macroscopic flow behavior. The sublayer renewal cycle exhibits quasi-steady flow behavior when the sublayer growth period is much less than the pulsation period, transition behavior when these two periods are approximately equal, and frozen eddy viscosity behavior when the sublayer period is much longer than the pulsation period. The effect of the sublayer growth and renewal cycle on the level of turbulence was investigated by two methods. The velocity fluctuations seen by a point velocity probe located close to the wall were predicted from the model in one method and the rate of turbulence production was estimated from the frequency of sublayer renewal events in the other.

Kingston, G. C.↗
NASA NTRS1991

Modeling the spatiotemporal organization of velocity storage in the vestibuloocular reflex by optokinetic studies

1. A generalized three-dimensional state space model of visual vestibular interaction was developed. Matrix and dynamical system operators associated with inputs from the semicircular canals, otolith velocity estimator, and the visual system have been incorporated into the model, which focus on their relationship to the velocity storage integrator. 2. A relationship was postulated between the eigenvalues and the direction of the eigenvectors of the system matrix and the orientation of the spatial vertical. It was assumed that the system matrix for a tilted position was a composition of two linear transformations of the system matrix for the upright position. One transformation modifies the eigenvalues of the system matrix, whereas another rotates the eigenvectors of the system matrix. The pitch and roll eigenvectors rotate with the head, whereas the yaw axis eigenvector remains approximately spatially invariant. 3. Based on the three-dimensional model, a computational procedure was formulated to identify the eigenvalues and eigenvectors of the system matrix with the use of a modification of the marquardt algorithm. With the use of data obtained from a monkey, it was shown that the three-dimensional behavior of velocity storage cannot be predicted solely in terms of its time constants, i.e., the inverse of its eigenvalues. With the use of the same eigenvalues the data could either be fit or not fit, depending on the eigenvector directions. Therefore, it is necessary to specify eigenvector directions when characterizing velocity storage in three dimensions. 4. Parameters found with the use of the Marquardt algorithm were incorporated into the model. Diagonal matrices in a head coordinate frame were introduced for coupling the visual system to the integrator and to the direct optokinetic pathway. Simulations of optokinetic nystagmus (OKN) and optokinetic after-nystagmus (OKAN) were run. The model predicted the behavior of yaw and pitch OKN and OKAN when the animal is upright. It also predicted the cross-coupling in the side down position. The trajectories in velocity space were also accurately simulated. 5. One of the predictions of the model is that when the stimulus direction is along an eigenvector, the trajectory in velocity space is a straight line. Using the "spectral width" of the residuals from a straight line sequence during OKAN, we developed a methodology to estimate how close the OKAN decay was to an eigenvector trajectory. 6. Thus we have developed a model-based approach for studying and interpreting the response characteristics of velocity storage in three dimensions.(ABSTRACT TRUNCATED AT 400 WORDS).

Non-NASA Center↗
DOE OSTI2023

Photoionization of C 60 at high energies

Calculations of the photoionization cross section of C60 including all valence and core subshells have been carried out for photon energies up to 1 keV using density functional theory (DFT) and time-dependent DFT (TDDFT) within the framework of a fully molecular model. The high-energy valence subshell cross sections behave rather differently than the results from model potentials where the cross section falls far too rapidly with energy. This unphysical behavior of the model calculations is traced to smearing out of the carbon nuclei in the model potentials which makes it difficult for momentum to be conserved at the higher energies. Comparison with 60 times carbon atomic cross section sheds light on similarities and differences. The high energy behavior of individual valence cross sections reflects the amount of C 2s/2p mixing in the molecular orbitals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Compound pulse characteristics of a heterogeneous composite scintillator in a gamma-ray field

An important aspect of radiation detection in scintillators is the time dependence of emitted fluorescence, which results in characteristic measured pulse shape. In some materials, a relatively strong dependence of the scintillation pulse shape on stopping power exists, which can provide reliable identification of the incident particle. An alternative method to realize particle identification is by combining materials with different fluorescence lifetimes into heterogeneous structures. Such composite scintillators derive their properties from both the constituent material characteristics and the geometry of the composite structure. In composite scintillators with a high degree of heterogeneous loading, a superposition of fluorescence contributions originating in multiple materials, which is observed as single waveform with an intermediate pulse shape, may affect its ability to reject rays. We measure the time dependence of light output from a scintillator composed of 6 Li-containing glass shards and scintillating polyvinyl toluene and identify events that exhibit such compound behavior when exposed to rays and fast neutrons. We develop a modeling and simulation framework that reproduces the pulse shapes in heterogeneous scintillators and use it study the effect that the weight percentage of 6 Li glass has on rejection. The modeling framework is applied to the experimentally studied scintillator, finding a good agreement. Here, the developed modeling and simulation approach will help optimize the design of heterogeneous scintillators to meet the desired trade-o between neutron capture efficiency and -ray rejection.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2025

In situ probing of structure and deagglomeration of SnO 2 colloids via small-angle X-ray scattering

Transforming dry nanopowders into stable colloidal dispersions remains challenging due to the cohesive forces between the nanoparticles (NPs) which promote agglomeration. Effective dispersion and deagglomeration of these agglomerates is a critical process in the formulation and preparation of nanoparticle-based functional materials via the colloidal route. Understanding the deagglomeration dynamics provides information to improve microstructural quality in various applications by enabling engineering of agglomerate size, structure and morphology. However, the deagglomeration process dynamics with respect to the evolution of the fractal agglomerate structures, particularly for very small NPs, is still poorly understood and requires further investigation. This study employs in situ small-angle X-ray scattering (SAXS) to investigate the sonication-induced deagglomeration of SnO 2 NPs. Electrostatically stabilized SnO 2 colloids with varying primary particle size (6–21 nm) are investigated in a specifically designed in situ cell using synchrotron-based SAXS to study the influence of sonication time and intensity on the nanoscaled agglomerates. Complete structural analysis via SAXS reveals a direct correlation between changes in agglomerate size and structure, size-dependent deagglomeration behavior and a dependence on the overall energy introduced during sonication into the dispersion regardless of the actual power as well as ultrasonic process parameters in case of SnO 2 NPs. The results suggest that control of the dispersion process during ultrasonic deagglomeration results in tailoring agglomerates with respect to size and structure.

Deagglomeration↗
DOE OSTI2020

Interplay between Intrinsic Thermal Stability and Expansion Properties of Functionalized UiO-67 Metal–Organic Frameworks

The UiO family of metal-organic frameworks (MOFs) has been extensively studied for several applications owing to their high stability rendered by their robust secondary building units. The efficient design and use of these materials require a fundamental understanding of their thermal stability and its impact on chemical and structural functionality. In this work, we provide a detailed characterization of the intrinsic thermal behavior of the UiO-67 and functional analogues, UiO-67-NH 2 and UiO-67-CH 3 . Using in situ temperature-programmed X-ray diffraction, we find that distortion of the carboxylate group on the organic linker leads to negative thermal expansion (NTE) of the UiO-67 MOFs during heating. This NTE behavior is correlated with rich and reversible thermal changes observed in the MOF infrared spectral signature as samples are heated to the sample activation temperature (473 K). We find that in the absence of oxygen, activated UiO-67 samples show higher thermal stability compared to ambient or inert environments, with temperature-programmed desorption revealing an overall stability trend: UiO-67 > UiO-67- CH 3 > UiO-67-NH 2 . Two stages of change are observed during thermal treatment above 473 K, which are directly related to deformation of the inorganic node and the isotropic NTE behavior of these materials. Ultimately, these results provide a real-time interpretation of the fundamental thermoresponsive behavior of UiO-67 MOFs and offer a foundation for accurate interpretation of MOF interactions with guest molecules and their temperature dependence.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Systematic Study of Solid-State U(VI) Photoreactivity: Long-Lived Radicalization and Electron Transfer in Uranyl Tetrachloride

Reported are the syntheses, structural characterizations and luminescence properties of three novel [UO 2 Cl 4 ] 2- bearing compounds containing substituted 1,1’-dialkyl-4,4’-bipyridinum dications (i.e. viologens). These compounds undergo photoinduced luminescence quenching upon exposure to UV radiation. Further, this reactivity is concurrent with two phenomena: radicalization of the uranyl tetrachloride anion and photoelectron transfer to the viologen which constitutes the formal transfer of one electron from the [UO 2 Cl 4 ] 2- to the viologen species. This behavior is elucidated using electron paramagnetic resonance (EPR) spectroscopy and further probed through a series of characterization and computational techniques including Rehm-Weller analysis, time-dependent density functional theory (TD-DFT), and density of states (DOS). This work provides a systematic study of the photoreactivity of the uranyl unit in the solid state, an under-described aspect of fundamental uranyl chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Pulse-shape analysis in Cd 0.9 Zn 0.1 Te 0.98 Se 0.02 room-temperature radiation detectors

The effect of trapping of charge carriers on the shape of the charge pulses from room temperature nuclear detectors, based on a recently discovered quaternary semiconductor Cd 0.9 Zn 0.1 Te 0.98 Se 0.02 (CZTS), has been studied. Here, we present a charge-trapping model that explains the pulse shapes for its entire duration from radiation detectors containing multiple defect types. A piecewise continuous model, based on the movement of a large number of charge carriers rather than a single charge, has been proposed to explain the pulse shapes from planar room temperature nuclear detectors. An experimental method based on the model has been described to extract charge-trapping information. This model can be applied to similar semiconductor detectors with electrically active trap centers, in general, to extract information like pre-trapping drift times. Charge pulses from a CZTS planar detector, exposed to 5486 keV alpha particles emitted by a 241Am source, were acquired using a digitizer, and the pulse shapes were explained based on the proposed model. The pre-trapping drift times for electrons as well as holes in CZTS were calculated and studied as a function of operating bias voltage, and a contrast between their bias dependent behaviors was noticed, indicating the behavioral difference of electron and hole traps.

42 ENGINEERING↗
DOE OSTI2020

Modular Linear Thermoviscoelastic Model

Time-dependent, viscoelastic responses of materials like polymers and glasses have long been studied. As such, a variety of models have been put forth to describe the behavior including simple rheological models (e.g. Maxwell, Kelvin), linear "fading memory" theories, and hereditary integral based linear thermal viscoelastic approaches as well as more recent nonlinear theories that are either integral, fictive temperature, or differential internal state variable based. The current work details a new LINEAR_THERMOVISCOELASTIC model that has been added to LAME. This formulation represents a viscoelastic theory that neglects some of the phenomenological details of the PEC/SPEC models in favor of efficiency and simplicity. Furthermore, this new model is a first step towards developing "modular" viscoelastic capabilities akin to those available with hardening descriptions for plasticity models in LAME. Specifically, multiple different (including user-defined) shift-factor forms are implemented with each being easily selected via parameter specification rather than requiring distinct material models.

36 MATERIALS SCIENCE↗
NASA NTRS1975

Post-ejection impacts of the space shuttle solid rocket booster nose cap

The dynamics of impacts between the nose cap ejected from the space shuttle solid rocket booster and the drogue parachute pack are analyzed. The analysis is restricted to planar impact, and assumes the law of restitution and the possible occurrence of three types of impact, depending on the friction behavior of the colliding surfaces: forward slip; backward slip; no slip (normal rebound). The positions of both bodies and their velocities at the time of impact are required. Seven successive impacts, representing all three types, detected and simulated for the case of nose cap ejection at 20 fps normal to the direction of airflow, with selected coefficients of friction (0.25) and restitution (0.85).

Banerjee, A. K.↗
NASA NTRS1981

Strength distributions of SiC ceramics after oxidation and oxidation under load

The room-temperature strength distributions of a sintered and a hot-pressed SiC were examined as-machined, after oxidation at 1370 C, and after oxidation under load at 1370 C. The strengths were observed to be dependent on both the duration of oxidation and the magnitude of the applied load. Processes resulting in both strengthening and weakening behavior were observed to occur, at times simultaneously within the same strength distribution. This dynamic situation indicates that the strength-controlling flaw populations are highly transient in nature.

Easler, T. E.↗