Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “tensor”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Investigation of low-speed turbulent separated flow around airfoils

Described is a low-speed wind tunnel experiment to measure the flowfield around a two-dimensional airfoil operating close to maximum lift. Boundary layer separation occurs on the upper surface at x/c=0.85. A three-component laser velocimeter, coupled with a computer-controlled data acquisition system, was used to obtain three orthogonal mean velocity components and three components of the Reynolds stress tensor in both the boundary layer and wake of the airfoil. Pressure distributions on the airfoil, skin friction distribution on the upper surface of the airfoil, and integral properties of the airfoil boudary layer are also documented. In addition to these near-field flow properties, static pressure distributions, both upstream and downstream from the airfoil and on the walls of the wind tunnel, are also presented.

Wadcock, Alan J.↗

Evaluation of closed cubic failure criterion for graphite/epoxy laminates

An analytical method has been developed to ensure closure of the cubic form of the tensor polynomial strength criterion. The intrinsic complexity of the cubic function is such that special conditions must be met to close the failure surface in three-dimensional stress space. These requirements are derived in terms of non-intersecting conditions for asymptotes and an asymptotic plane. To demonstrate the validity of this approach, closed failure surfaces were derived for two graphite/epoxy material systems (3M SP288-T300 and IM7 8551-7). The agreement of test data with this model clearly shows that it is possible to use a higher order cubic failure theory with confidence.

Tennyson, R. C.↗

Spaceborne gravity gradiometry characterizing the data type

Satellite gravity gradiometers, particularly the two stage drag free carrier vehicle are discussed. An inner stage, carrying the tracking antenna(s), measures the relative position of the internal free proof mass, and feeds this to a set of magnetic forcers, acting against the outer or main vehicle. As the external forces on the inner stage are low, and as the position relative to the proof mass is tightly controlled, carrier phase disturbances are greatly reduced. The arrangement lowers instantaneous accelerations. It is stressed that gravity gradiometers do not measure gradients, they measure components of an intrinsic tensor.

Sonnabend, D.↗

Gradiometer accommodation on board a drag-free satellite

Accommodation of the GRADIO instrument, composed of eight three-axis ultrasensitive accelerometers located at the corners of a cubic structure on a Geopotential Research Mission spacecraft is discussed. A two-stage DISCOS configuration with a magnetically suspended inner-stage; and a very fine control of the Earth pointed inner-stage taking into account the GRADIO accelerometer measurements in order to limit the variations of the angular accelerations are required. For diagonal tensor components and an averaging time of 4 sec, the overall goal is 0.1 Eotvos at 160 km altitude.

Touboul, P.↗

A low dimensional dynamical system for the wall layer

Low dimensional dynamical systems which model a fully developed turbulent wall layer were derived.The model is based on the optimally fast convergent proper orthogonal decomposition, or Karhunen-Loeve expansion. This decomposition provides a set of eigenfunctions which are derived from the autocorrelation tensor at zero time lag. Via Galerkin projection, low dimensional sets of ordinary differential equations in time, for the coefficients of the expansion, were derived from the Navier-Stokes equations. The energy loss to the unresolved modes was modeled by an eddy viscosity representation, analogous to Heisenberg's spectral model. A set of eigenfunctions and eigenvalues were obtained from direct numerical simulation of a plane channel at a Reynolds number of 6600, based on the mean centerline velocity and the channel width flow and compared with previous work done by Herzog. Using the new eigenvalues and eigenfunctions, a new ten dimensional set of ordinary differential equations were derived using five non-zero cross-stream Fourier modes with a periodic length of 377 wall units. The dynamical system was integrated for a range of the eddy viscosity prameter alpha. This work is encouraging.

Aubry, N.↗

The decay of isotropic turbulence in a rapidly rotating frame

A direct numerical simulation of the decay of initially isotropic turbulence in a rapidly rotating frame was conducted. This 128 x 128 x 128 simulation was completed for a Reynolds number Re sub lambda = 15.3 and a Rossby number Ro sub lambda = 0.07 based on the initial turbulent kinetic energy and Taylor microscale. The numerical results indicate that the turbulence remains essentially isotropic during the major part of the decay (i.e., beyond the point where the turbulent kinetic energy has decayed to less than 10 percent of its initial value). The rapid rotation has the primary effect of shutting off the energy transfer so that the turbulence dissipation (and hence the rate of decay of the turbulent kinetic energy) is substantially reduced. Consequently, the anisotropy tensor remains essentially unchanged while the energy spectrum undergoes a nearly linear viscous decay (the same results that are predicted by Rapid Distortion Theory which is only formally valid for much shorter elapsed times. Surprisingly, no Taylor-Proudman reorganization of the flow to a two-dimensional state is observed. The implications that these results have on turbulence modeling are discussed briefly along with prospective future research.

Speziale, C. G.↗

Minimal parameter solution of the orthogonal matrix differential equation

As demonstrated in this work, all orthogonal matrices solve a first order differential equation. The straightforward solution of this equation requires n sup 2 integrations to obtain the element of the nth order matrix. There are, however, only n(n-1)/2 independent parameters which determine an orthogonal matrix. The questions of choosing them, finding their differential equation and expressing the orthogonal matrix in terms of these parameters are considered. Several possibilities which are based on attitude determination in three dimensions are examined. It is shown that not all 3-D methods have useful extensions to higher dimensions. It is also shown why the rate of change of the matrix elements, which are the elements of the angular rate vector in 3-D, are the elements of a tensor of the second rank (dyadic) in spaces other than three dimensional. It is proven that the 3-D Gibbs vector (or Cayley Parameters) are extendable to other dimensions. An algorithm is developed employing the resulting parameters, which are termed Extended Rodrigues Parameters, and numerical results are presented of the application of the algorithm to a fourth order matrix.

Bar-Itzhack, Itzhack Y.↗

Resonance absorption of magnetohydrodynamic surface waves - Viscous effects

The effects of viscosity on the resonance absorption of incompressible MHD surface waves, which occurs when the waves are supported by a thin 'transition layer' rather than by a discontinuous surface, are considered. The behavior of the plasma and fields inside the transition layer is considered, allowing for classical viscosity. An inhomogeneous Airy equation for the velocity component along the propagative direction is obtained in the vicinity of the resonant field line. The viscous stress tensor for a magnetized plasma is considered, and a simple algebraic steady state equation is obtained for the velocity component along the background magnetic field. The net heating rate is evaluated and found to be independent of the viscosity coefficient, and to correspond to the surface wave 'decay rate' obtained from ideal MHD equations.

Hollweg, Joseph V.↗

Rectangular subsonic jet flowfield study

The flowfield of a rectangular jet with 2:1 aspect ratio was studied at an axial Reynolds number of 127,000, using a three-dimensional laser anemometer. The flowfield surveys resulted in mean velocity vector field plots and contour plots of the Reynolds stress tensor components for the major and minor axes. These data contribute substantially to currently available data of jet flowfields.

Morrison, Gerald L.↗

Computer simulation of ledge formation and ledge interaction for the silicon (111) free surface

Both strip and triangular clusters, composed of 2 -1 -1 line ledges, have been simulated on the Si (111) surface. The long-range ledge-ledge interaction and the surface stress tensor distribution have been evaluated for these two pill-box geometries using a semiempirical potential-energy function that incorporates both two-body and three-body contributions. The consequences of the ledge-ledge interaction on two-dimensional nucleation for Si (111) has been evaluated as a function of Si adatom supersaturation and shown to differ significantly from conventional theory, where such interaction is neglected.

Balamane, H.↗

3-D LDA study of a rectangular jet

The flow field of a rectangular jet with a 2:1 aspect ratio was studied at an axial Reynolds number of 100,000 (Mach number 0.09) using three-dimensional laser Doppler velocimetry. The flow field survey resulted in mean velocity vector field plots and contour plots of the Reynolds stress tensor components. This paper presents contour plots in the planes of the jet minor and major axes at different axial locations. These data contribute substantially to currently available data of jet flow fields and will provide a valuable database for three-dimensional modeling.

Morrison, Gerald L.↗

Fiber optic and laser sensors IV; Proceedings of the Meeting, Cambridge, MA, Sept. 22-24, 1986

The conference presents papers on industrial uses of fiber optic sensors, point and distributed polarimetric optical fiber sensors, fiber optic electric field sensor technology, micromachined resonant structures, single-mode fibers for sensing applications, and measurement techniques for magnetic field gradient detection. Consideration is also given to electric field meter and temperature measurement techniques for the power industry, the calibration of high-temperature fiber-optic microbend pressure transducers, and interferometric sensors for dc measurands. Other topics include the recognition of colors and collision avoidance in robotics using optical fiber sensors, the loss compensation of intensity-modulating fiber-optic sensors, and an embedded optical fiber strain tensor for composite structure applications.

De Paula, Ramon P.↗

Changes in the earth's rotation and low-degree gravitational field induced by earthquakes

Analytical formulas based on the normal-mode theory are used together with a spherically symmetric earth model and the centroid-moment tensor solutions for earthquake sources to compute the earthquake-induced changes in the earth's rotation and low-degree harmonics of the gravitational field for the period 1977-1985. Spectral and statistical analyses are conducted on these changes. It is found that the earthquake-induced changes are two orders of magnitude smaller than those observed; most of these changes show strong evidence of nonrandomness either in their polarity or in their directions.

Chao, B. Fong↗

Covariance and the hierarchy of frame bundles

This is an essay on the general concept of covariance, and its connection with the structure of the nested set of higher frame bundles over a differentiable manifold. Examples of covariant geometric objects include not only linear tensor fields, densities and forms, but affinity fields, sectors and sector forms, higher order frame fields, etc., often having nonlinear transformation rules and Lie derivatives. The intrinsic, or invariant, sets of forms that arise on frame bundles satisfy the graded Cartan-Maurer structure equations of an infinite Lie algebra. Reduction of these gives invariant structure equations for Lie pseudogroups, and for G-structures of various orders. Some new results are introduced for prolongation of structure equations, and for treatment of Riemannian geometry with higher-order moving frames. The use of invariant form equations for nonlinear field physics is implicitly advocated.

Estabrook, Frank B.↗

The diffusion of stars through phase space

An orbit-averaged Fokker-Planck equation has been derived to study the secular evolution of stellar systems with regular orbits and the heating of stellar disks. It is shown that a population of stars with an initially Maxwellian peculiar-velocity distribution will remain Maxwellian as it diffuses through orbit space only if: (1) a second-order diffusion tensor is proportional to epicycle energy; and (2) the population's velocity dispersion grows as the square root of time. Scattering by ephemeral spiral waves is able to account for the observed kinematics of the solar neighborhood only if the waves have wavelengths in excess of 9 kpc and constantly drifting pattern speeds.

Binney, James↗

Boundary conditions for the Navier-Stokes equations

Using ideas from kinetic theory, the Navier-Stokes equations are modified in such a way that they can be cast as a set of first order hyperbolic equations. This is achieved by incorporating time dependent terms into the definition of the stress tensor and the heat flux vectors. The boundary conditions are then determined from the theory of characteristics. Because the resulting equations reduce to the traditional Navier-Stokes equations when the steady state is reached, the present approach provides a straightforward scheme for the determination of inflow and outflow boundary conditions. The method is validated by comparing its predictions with exact and numerical solutions of the steady Navier-Stokes equations.

Rudisill, Edgar N., Jr.↗

The einstein equivalence principle, intrinsic spin and the invariance of constitutive equations in continuum mechanics

The invariance of constitutive equations in continuum mechanics is examined from a basic theoretical standpoint. It is demonstrated the constitutive equations which are not form invariant under arbitrary translational accelerations of the reference frame are in violation of the Einstein equivalane principle. Furthermore, by making use of an analysis based on statistical mechanics, it is argued that any frame-dependent terms in constitutive equations must arise from the intrinsic spin tensor and are negligible provided that the ratio of microscopic to macroscopic time scales is extremely small. The consistency of these results with existing constitutive theories is discussed in detail along with possible avenues of future research.

Speziale, Charles G.↗

Turbulent diffusivity

A method for determining the turbulent diffusivity tensor is proposed which has application to problems such as the mixing in the interior of the sun for the solar neutrino problem, the chemical evolution of the galaxy, and grain sedimentation on the primitive solar nebula. A model for determining the turbulent energy spectral function, the eddy decorrelation rate, and the growth rate of the underlying instability is discussed. Good agreement is obtained between the present values for the coefficient of turbulent diffusivity and those obtained from both numerical simulation studies and laboratory data on shear turbulence.

Canuto, V. M.↗