Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface modifications”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Modeling of Laser Vaporization and Plume Chemistry in a Boron Nitride Nanotube Production Rig

Flow in a pressurized, vapor condensation (PVC) boron nitride nanotube (BNNT) production rig is modeled. A laser provides a thermal energy source to the tip of a boron ber bundle in a high pressure nitrogen chamber causing a plume of boron-rich gas to rise. The buoyancy driven flow is modeled as a mixture of thermally perfect gases (B, B2, N, N2, BN) in either thermochemical equilibrium or chemical nonequilibrium assuming steady-state melt and vaporization from a 1 mm radius spot at the axis of an axisymmetric chamber. The simulation is intended to define the macroscopic thermochemical environment from which boron-rich species, including nanotubes, condense out of the plume. Simulations indicate a high temperature environment (T > 4400K) for elevated pressures within 1 mm of the surface sufficient to dissociate molecular nitrogen and form BN at the base of the plume. Modifications to Program LAURA, a finite-volume based solver for hypersonic flows including coupled radiation and ablation, are described to enable this simulation. Simulations indicate that high pressure synthesis conditions enable formation of BN vapor in the plume that may serve to enhance formation of exceptionally long nanotubes in the PVC process.

Gnoffo, Peter A.↗

Assessment of Potential Mars Relay Network Enhancements

In anticipation of increased demands on Mars relay services, including planned arrivals of NASA’s InSight Lander in November 2018, and of NASA’s Mars 2020 rover and ESA’s ExoMars Rover & Surface Platform mission in Feb-Mar.2021, we have assessed a number of potential modifications and upgrades to Mars relay orbiters and quantified their impacts in terms of key relay support metrics, to support NASA and ESA programmatic decisions. Specific areas of investigation include: 1) implementation of “split-pass” relay capability for support to collocated landers, 2) modifications of the extended mission orbit for the Mars Atmosphere and Volatile EvolutioN Mission (MAVEN), and 3) introduction of Low-Density Parity Check (LDPC) coding. We report here on each of these potential upgrades, quantify the performance implications each would have on future Mars relay services in the context of future mission support scenarios, and provide a status on implementation.

Wenkert, Daniel↗

Hydrodynamic Instability and Thermal Coupling in a Dynamic Model of Liquid-Propellant Combustion

For liquid-propellant combustion, the Landau/Levich hydrodynamic models have been combined and extended to account for a dynamic dependence of the burning rate on the local pressure and temperature fields. Analysis of these extended models is greatly facilitated by exploiting the realistic smallness of the gas-to-liquid density ratio rho. Neglecting thermal coupling effects, an asymptotic expression was then derived for the cellular stability boundary A(sub p)(k) where A(sub p) is the pressure sensitivity of the burning rate and k is the disturbance wavenumber. The results explicitly indicate the stabilizing effects of gravity on long-wave disturbances, and those of viscosity and surface tension on short-wave perturbations, and the instability associated with intermediate wavenumbers for critical negative values of A(sub p). In the limit of weak gravity, hydrodynamic instability in liquid-propellant combustion becomes a long-wave, instability phenomenon, whereas at normal gravity, this instability is first manifested through O(1) wavenumbers. In addition, surface tension and viscosity (both liquid and gas) each produce comparable effects in the large-wavenumber regime, thereby providing important modifications to the previous analyses in which one or more of these effects was neglected. For A(sub p)= O, the Landau/Levich results are recovered in appropriate limiting cases, although this typically corresponds to a hydrodynamically unstable parameter regime for p << 1. In addition to the classical cellular form of hydrodynamic stability, there exists a pulsating form corresponding to the loss of stability of steady, planar burning to time-dependent perturbations. This occurs for negative values of the parameter A(sub p), and is thus absent from the original Landau/Levich models. In the extended model, however, there exists a stable band of negative pressure sensitivities bounded above by the Landau type of instability, and below by this pulsating form of hydrodynamic instability. Indeed, nonsteady modes of combustion have been observed at low pressures in hydroxylammonium nitrate (HAN)-based liquid propellants, which often exhibit negative pressure sensitivities. While nonsteady combustion may correspond to secondary and higher-order bifurcations above the cellular boundary, it may also be a manifestation of this pulsating type of hydrodynamic instability. In the present work, a nonzero temperature sensitivity is incorporated into our previous asymptotic analyses. This entails a coupling of the energy equation to the previous purely hydrodynamic problem, and leads to a significant modification of the pulsating boundary such that, for sufficiently large values of the temperature-sensitivity parameter, liquid-propellant combustion can become intrinsically unstable to this alternative form of hydrodynamic instability. For simplicity, further attention is confined here to the inviscid version of the problem since, despite the fact that viscous and surface-tension effects are comparable, the qualitative nature of the cellular boundary remains preserved in the zero-viscosity limit, as does the existence of the pulsating boundary. The mathematical model adopts the classical assumption that there is no distributed reaction in either the liquid or gas phases, but now the reaction sheet, representing either a pyrolysis reaction or an exothermic decomposition at the liquid/gas interface, is assumed to depend on local conditions there.

Margolis, S. B.↗

Modification of a Limbed Robot to Favor Climbing

The figure shows the LEMUR IIb, which is a modified version of the LEMUR II the second generation of the Limbed Excursion Mechanical Utility Robot (LEMUR). Except as described below, the LEMUR IIb hardware is mostly the same as that of the LEMUR II. The IIb and II versions differ in their kinematic configurations and characteristics associated with their kinematic configurations. The differences are such that relative to the LEMUR II, the LEMUR IIb is simpler and is better suited to climbing on inclined surfaces. The first-generation LEMUR, now denoted the LEMUR I, was described in Six-Legged Experimental Robot (NPO-20897), NASA Tech Briefs, Vol. 25, No. 12 (December 2001), page 58. The LEMUR II was described in Second-Generation Six-Limbed Experimental Robot (NPO-35140) NASA Tech Briefs, Vol. 28, No. 11 (November 2004), page 55. To recapitulate: the LEMUR I and LEMUR II were six-legged or sixlimbed robots for demonstrating robotic capabilities for assembly, maintenance, and inspection. They were designed to be capable of walking autonomously along a truss structure toward a mechanical assembly at a prescribed location. They were equipped with stereoscopic video cameras and image-data-processing circuitry for navigation and mechanical operations. They were also equipped with wireless modems, through which they could be commanded remotely. Upon arrival at a mechanical assembly, the LEMUR I would perform simple mechanical operations by use of one or both of its front legs (or in the case of the LEMUR II, any of its limbs could be used to perform mechanical operations). Either LEMUR could also transmit images to a host computer. The differences between the LEMUR IIb and the LEMUR II are the following: Whereas the LEMUR II had six limbs, the LEMUR IIb has four limbs. This change has reduced both the complexity and mass of the legs and of the overall robot. Whereas each limb of the LEMUR II had four degrees of freedom (DOFs), each limb of the LEMUR IIb has three DOFs. This change has also reduced both complexity and mass. Notwithstanding the decrease in the number of DOFs, the three remaining DOFs are configured to provide greater dexterity for motion along a surface. To extend reach, the limbs of the LEMUR IIb are 25 percent longer than those of the LEMUR II. Additional benefits stemming from the modifications are that the robot body supported by the limbs is now less massive and its center of gravity is now closer to the surface along which the robot is to move. These benefits have been obtained without sacrificing load-carrying capacity. Hence, overall, the LEMUR IIb is a more adept climber.

Okon, Avi↗

Surface brightness, standard candles and q/0/

The most direct way to determine the deceleration parameter, q(0), of the universe is through the study of the redshift-magnitude relation of extragalactic sources. Progress has been slow because the necessary sources for this study must be standard candles, which have identical absolute total luminosity (balometric or monochromatic). The present paper shows, first of all, that, although necessary, this is not a sufficient condition for nonpoint-like (or resolved) sources. A modification of the redshift-magnitude relation is then described for a certain class of nonstandard candles using measurements of isophotal surface brightness. It is noted that such measurements can be used to standardize the central surface brightness of galaxies, but the standardization of the scale parameter remains beyond observations.

Petrosian, V.↗

High-Temperature Smart Structures for Engine Noise Reduction and Performance Enhancement

One of key NASA goals is to develop and integrate noise reduction technology to enable unrestricted air transportation service to all communities. One of the technical priorities of this activity has been to account for and reduce noise via propulsion/airframe interactions, identifying advanced concepts to be integrated with the airframe to mitigate these noise-producing mechanisms. An adaptive geometry chevron using embedded smart structures technology offers the possibility of maximizing engine performance while retaining and possibly enhancing the favorable noise characteristics of current designs. New high-temperature shape memory alloy (HTSMA) materials technology enables the devices to operate in both low-temperature (fan) and high-temperature (core) exhaust flows. Chevron-equipped engines have demonstrated reduced noise in testing and operational use. It is desirable to have the noise benefits of chevrons in takeoff/landing conditions, but have them deployed into a minimum drag position for cruise flight. The central feature of the innovation was building on rapidly maturing HTSMA technology to implement a next-generation aircraft noise mitigation system centered on adaptive chevron flow control surfaces. In general, SMA-actuated devices have the potential to enhance the demonstrated noise reduction effectiveness of chevron systems while eliminating the associated performance penalty. The use of structurally integrated smart devices will minimize the mechanical and subsystem complexity of this implementation. The central innovations of the effort entail the modification of prior chevron designs to include a small cut that relaxes structural stiffness without compromising the desired flow characteristics over the surface; the reorientation of SMA actuation devices to apply forces to deflect the chevron tip, exploiting this relaxed stiffness; and the use of high-temperature SMA (HTSMA) materials to enable operation in the demanding core chevron environment. The overall conclusion of these design studies was that the cut chevron concept is a critical enabling step in bringing the variable geometry core chevron within reach. The presence of the cut may be aerodynamically undesirable in some respects, but it is present only when the chevron is not immersed in the core jet exhaust. When deployed, the gap closes as the chevron tip enters the high-speed, high-temperature core stream. Aeroacoustic testing and flow visualization support the contention that this cut is inconsequential to chevron performance.

Quackenbush, Todd R.↗

Optimization of Picosecond Laser Parameters for Surface Treatment of Composites Using a Design of Experiments (DOE) Approach

Based on guidelines from the Federal Aviation Administration, research supported by the NASA Advanced Composites Project is investigating methods to improve process control for surface preparation and pre-bond surface characterization on aerospace composite structures. The overall goal is to identify high fidelity, rapid, and reproducible surface treatments and surface characterization methods to reduce the uncertainty associated with the bonding process. The desired outcome is a more reliable bonded airframe structure, and to reduce time to achieve certification. In this work, a design of experiments (DoE) approach was conducted to determine optimum laser ablation conditions using a pulsed laser source with a nominal pulse width of 10 picoseconds. The laser power, frequency, scan speed, and number of passes (1 or 2) were varied within the laser system operating boundaries. Aerospace structural carbon fiber reinforced composites (Torayca® 3900-2/T800H) were laser treated, then characterized for contamination, and finally bonded for mechanical testing. Pre-bond characterization included water contact angle (WCA) using a handheld device, ablation depth measurement using scanning electron microscopy (SEM), and silicone contamination measurement using laser induced breakdown spectroscopy (LIBS). In order to accommodate the large number of specimens in the DoE, a rapid-screening, double cantilever beam (DCB) test specimen configuration was devised based on modifications to ASTM D5528. Specimens were tested to assess the failure modes observed under the various laser surface treatment parameters. The models obtained from this DoE indicated that results were most sensitive to variation in the average laser power. Excellent bond performance was observed with nearly 100% cohesive failure for a wide range of laser parameters. Below about 200 mW, adhesive failure was observed because contamination was left on the surface. For laser powers greater than about 600 mW, large amounts of fiber were exposed, and the failure mode was predominately fiber tear.

Palmieri, Frank L.↗

Significant results from Apollo 14 lunar orbital photography.

Apollo 14 obtained 950 photographs from lunar orbit using the Hasselblad and Hycon cameras. The photographs reveal a number of new geologic features as well as previously unrecognized details of the morphology, structure, and stratigraphy of lunar surface units. The primary result is the verification of the extensive role of volcanism in the formation and modification of the lunar highlands, especially on the far side. Terra volcanism appears to be manifest in the formation of (1) constructional units of hilly and furrowed materials of regional extent as in the Kant Plateau in the central near-side highlands and northwest of the crater Pasteur near the eastern limb of the moon; (2) somewhat viscous lava flows and pools associated with fracture systems and/or what appear to be volcanic craters; (3) craters, crater chains, and irregular depressions, particularly on the lunar far side. The first photographs of a flow channel, a leveed sinuous rille that apparently originated by lava flowage on the surface, were obtained by Apollo 14. Another first is a high-resolution photograph of the interior of what appears to be the youngest lunar crater yet photographed in the 20- 40-km size range.

El-Baz, F.↗

Integrated GNC Modifications and Performance Assessments for the Mars Ascent Vehicle, Spin-Stabilized Upper Stage Configuration

The objective of the Mars Ascent Vehicle (MAV), an element of the Mars Sample Return (MSR) campaign, is to successfully transport Martian surface samples from the Martian surface to a stable Low-Martian Orbit. Complete autonomy is required throughout ascent, and orbital insertion is constrained by tight dispersion boundaries. Given mass requirements to merely transport the MAV onto the Martian surface, reducing the total mass of the MAV reduces stress on all other campaign elements. An unguided, spin-stabilized second stage MAV allows for lower overall vehicle mass, at the cost of reduced GNC capability. This paper presents GNC modifications developed and employed to improve the performance of an unguided, spin-stabilized second stage MAV configuration. These updates include a predictive calculation scheme to solve the spin-stabilized attitude necessary for successful orbital insertion, and a spin-stabilized control law for a preliminary low-rate first stage spin-up. Trades were conducted focusing on first and second stage low-rate and high-rate spin rates (and other factors) in MSFC's MANTIS toolkit through 6-degree-of-freedom simulation and Monte Carlo analysis, and are presented here.

Dane Erickson↗

View factor computer program (program view) user's manual

The purpose of program VIEW is to compute view factors between specified surfaces and to be compatible with level 15.5 of the NASTRAN structural analysis program. Program VIEW is a modification of a (finite element) view factor computation program called RAVFAC. VIEW is designed to run on an IBM System/360 operating under OS (operating system), with a minimum region size of 110 K bytes. The actual computation of view factors is still performed exactly as it was in the original version of RAVFAC. In developing VIEW, RAVFAC was modified to satisfy the following compatibility requirements: (1) accept finite element input which can also be used as input to NASTRAN, (2) produce output (view factors) in a format which can be used as input to NASTRAN, and (3) follow NASTRAN program design so that in the future VIEW can be incorporated into NASTRAN as a subroutine. The VIEW program permits computation of the view factors between surfaces, taking into account the presence of any intermediate surfaces. VIEW also computes these view factors either by contour integration or by finite difference (double summation) methods.

Puccinelli, E. F.↗

Solar wind helium, neon and argon released by oxidation of metal grains from the Weston chondrite

A set of experiments were carried out to test the feasibility of determining unfractionated elemental and isotopic ratios for the noble gases in the presumably ancient solar wind present in the gas rich meteorites. The problems of diffusive loss was avoided by analyzing metal rather than the usual silicates. In order to avoid chemical, and even harsh physical, treatment of the sample, which might have affected the surfaces of metal grains, a means of analyzing the metal in the presence of residual silicate not removed by gentle crushing and magnetic separation was devised. Preliminary results given were obtained by taking advantage of the differing properties of metal and silicates with regard to diffusion. The results suggests that, with some modifications in the choice of pyrolysis and combustion temperatures and in the amount of O2 used, it should be possible, by oxidizing the surfaces of metal grains from gas rich meteorites, to obtain data on solar wind that has not been fractionated by diffusive loss.

Becker, R. H.↗

Influence of debris dent on EHD lubrication

Film thickness measurements associated with a debris dent have been made with interferometry under static and dynamic conditons. The presence of a debris dent alters the shape of the inlet region so that the local film thickness at the leading edge of the dent can become substantially lower than the trailing edge. The pressure modifications associated with these local elastohydrodynamic (EHD) effects are in line with the frequent occurrence of surface initiated fatigue spalls originating at the trailing edge of debris dents. The effectiveness of the EHD mechanism in reducing the stress concentrations at the shoulders of the dent is related to inlet dimensions and dent size.

Wedeven, L. D.↗

LARC-13 adhesive development

A LARC-13 type adhesive system was developed and property data obtained that demonstrated improved thermomechanical properties superior to base LARC-13 adhesive. An improved adhesive for 589 K (600 F) use was developed by physical or chemical modification of LARC-13. The adhesive was optimized for titanium and composite bonding, and a compatible surface preparation for titanium and composite substrates was identified. The data obtained with the improved adhesive system indicated it would meet the 589 K (600 F) properties desired for application on space shuttle components. Average titanium lap shear data were: (1) 21.1 MPa (3355 psi) at RT, (2) 13.0 MPa (1881 psi) at 600 F, and (3) 16.4 MPa (2335) after aging 125 hours at 600 F and tested at 600 F.

Hill, S. G.↗

Modeling of thin film GaAs growth

A potential scaling Monte Carlo model of crystal growth is developed. The model is a modification of the solid-on-solid method for studying crystal growth in that potentials at surface sites are continuously updated on a time scale reflecting the surface events of migration, incorporation and evaporation. The model allows for B on A type of crystal growth and lattice disregistry by the assignment of potential values at various surface sites. The surface adatoms are periodically assigned a random energy from a Boltzmann distribution and this energy determines whether the adatoms evaporate, migrate or remain stationary during the sampling interval. For each addition or migration of an adatom, the surface potentials are adjusted to reflect the adsorption, migration or desorption potential changes.

Heinbockel, J. H.↗

Piloted simulation study of a balloon-assisted deployment of an aircraft at high altitude

A piloted simulation was used to study the feasibility of a balloon assisted deployment of a research aircraft at high altitude. In the simulation study, an unmanned, modified sailplane was carried to 110,000 ft with a high altitude balloon and released in a nose down attitude. A remote pilot controlled the aircraft through a pullout and then executed a zoom climb to a trimmed, 1 g flight condition. A small parachute was used to limit the Mach number during the pullout to avoid adverse transonic effects. The use of small rocket motor was studied for increasing the maximum attainable altitude. Aerodynamic modifications to the basic sailplane included applying supercritical airfoil gloves over the existing wing and tail surfaces. The aerodynamic model of the simulated aircraft was based on low Reynolds number wind tunnel tests and computational techniques, and included large Mach number and Reynolds number effects at high altitude. Parametric variations were performed to study the effects of launch altitude, gross weight, Mach number limit, and parachute size on the maximum attainable stabilized altitude. A test altitude of approx. 95,000 ft was attained, and altitudes in excess of 100,000 ft was attained.

Murray, James↗

Research in unsteady aerodynamics and computational aeroelasticity at the NASA Langley Research Center

This paper presents recent results in the unsteady aerodynamics and computational aeroelasticity research programs at the NASA Langley Research Center. These programs include development of two types of computational methods: methods that use structured computational meshes and those that use unstructured meshes. Results show that an aeroelastic analysis method that uses unsteady transonic small disturbance (TSD) potential aerodynamics and structured, Cartesian meshes is capable of accurate analysis of complex aircraft configurations. The paper describes recent enhancements to the TSD method that allow analysis of vehicles with swept, flexible vertical surfaces and flexible fuselages and presents selected results that verify the accuracy of the new capabilities. Modifications to a structured-mesh Euler/Navier-Stokes method to allow aeroelastic analysis are described, and a wing flutter analysis using the resulting method is presented. Advantages of using unstructured meshes for the analysis of complex configurations are discussed. The paper presents development of unstructured-mesh Euler/Navier-Stokes methods for unsteady aerodynamics and aeroelastic analysis. Spatial and temporal adaption methods on unstructured meshes are described, and selected results are presented.

Whitlow, Woodrow, Jr.↗

Effects of low earth orbit on the optical performance of multi-layer enhanced high reflectance mirrors

Two mirror designs developed for space applications were flown along with a standard mid-infrared design on the leading and trailing edges of the Long Duration Exposure Facility (LDEF). Preliminary observations of induced changes in optical performance of ZnS-coated mirrors and impact-related microstructural and microchemical effects are described in the proceedings of the First LDEF Post-Retrieval Symposium. In this paper, effects of the induced environment and meteoroid/debris impacts on mirror performance are described in more detail. Also, an analysis of reflectance spectra using the results of Auger and secondary ion mass spectroscopy (SIMS) profiling measurements are used to identify an optical-degradation mechanism for the ZnS-coated mirrors. Structural damage associated with a high-velocity impact on a (Si/Al2O3)-coated mirror was imaged optically and with scanning electron and atomic force microscopy (SEM and AFM). Scanning Auger and SIMS analysis provided chemical mapping of selected impact sites. The impact data suggest design and fabrication modifications for obtaining improved mechanical performance using a design variation identified in preflight laboratory simulations. Auger surface profile and SIMS imaging data verified the conclusion that secondary impacts are the source of contamination associated with the dendrites grown on the leading-edge ZnS-coated test samples. It was also found that dendrites can be grown in the laboratory by irradiating contaminated sites on a trailing-edge ZnS-coated sample with a rastered electron beam. These results suggest a mechanism for dendrite growth.

Donovan, Terence↗

Evaluation of 3D Inverse Code Using Rotor 67 as Test Case

A design modification of Rotor 67 is carried out with a full 3D inverse method. The blade camber surface is modified to produce a prescribed pressure loading distribution, with the blade tangential thickness distribution and the blade stacking line at midchord kept the same as the original Rotor 67 design. Because of the inviscid-flow assumption used in the current version of the method, Rotor 67 geometry is modified for use at a design point different from the original design value. A parametric study with the prescribed pressure loading distribution yields the following results. In the subsonic section, smooth pressure loading shapes generally produce blades with well-behaved blade surface pressure distributions. In the supersonic section, the study shows that the strength and position of the passage shock correlate with the characteristics of the blade pressure loading shape. In general, "smooth" prescribed blade pressure loading distributions generate blade designs with reverse cambers which have the effect of weakening the passage shock.

Dang, T.↗