Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “superconducting devices”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

KIPM Detector Characterization in QUIET

Kinetic Inductance Phonon‑Mediated (KIPM) detectors are superconducting microwave resonators on silicon that sense bursts of energy through tiny shifts in their resonance. In this work, we installed new devices in the QUIET facility's cryogenic test setup and used a network analyzer to drive them across a range of power levels. At each setting, we measured the transmitted signal and fit it to a simple notch‑filter model, allowing us to extract key performance metrics. And despite the increased noise at low power, our model consistently captured the resonance behavior. We observed that the resonant frequency stayed stable across most powers, the device s internal quality factor improved with stronger signals, and its coupling strength peaked mid‑range before leveling off. Overall, these findings confirm the detector s performance, laying groundwork for future work on energy calibration with pulsed optical sources.

Savitala, Akash [Washington U., Seattle; Fermilab]↗

Enhancing Entanglement: Non-Markovian and Floquet Reservoir Engineering in Many-Qubit Superconducting Quantum Circuits

This is an experimental and theoretical project to leverage dissipation engineering under non-Markovian settings in order to aid in the preparation and stabilization of large, non-trivial, entangled quantum states. This project is a collaborative effort between the Painter group at Caltech and the Clerk group at the University of Chicago. By utilization of superconducting qubits coupled to the metamaterial waveguide described in the proposal, we tackle this goal via two parallel thrusts: (i) non-Markovian dynamics of a superconducting qubit strongly coupled to a slow-light waveguide reservoir and generation of 2D cluster states and (ii) many-qubit waveguide circuit QED for studying quantum many-body physics. In addition to device development and testing, we are also developing theoretical methods for understanding physics in the deep non-Markovian regime and driven-dissipative protocols for preparing and stabilizing the quantum many-body states.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Giant Magnetic and Optical Anisotropy in Cerium-Substituted M-Type Strontium Hexaferrite Driven by $4f$ Electrons

By performing density-functional calculations, we find a giant magnetocrystalline anisotropy (MCA) constant in abundant element cerium $\mathrm{Ce}$ substituted M-type hexaferrite, in the energetically favorable strontium site, assisted by a quantum confined electron transfer from $\mathrm{Ce}$ to a specific iron $\mathrm{2a}$ site. Remarkably, the calculated electronic structure shows that the electron transfer leads to the formation of $\mathrm{Ce}^{3+}$ and $\mathrm{Fe}^{2+}$ at the $\mathrm{2a}$ site producing an occupied $\mathrm{Ce}$$(4f^1)$ state below the Fermi level that adds a significant contribution to MCA and magnetic moment. A half $\mathrm{Ce}$ substitution forms a metallic state, while a full substitution retains the semiconducting state of the strontium hexaferrite (host). In the latter, the band gap is reduced due to the formation of charge-transferred states in the gap region of the host. The optical absorption coefficient shows an enhanced anisotropy between light polarization in parallel and perpendicular directions. Calculated formation energies, including the analysis of probable competing phases, and elastic constants confirm that both compositions are chemically and mechanically stable. With successful synthesis, the $\mathrm{Ce}$ hexaferrite can be an alternative high-performing critical-element-free permanent magnet material adapted for use in devices such as automotive traction drive motors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Phonon-Assisted Intertube Electronic Transport in an Armchair Carbon Nanotube Film

The electrical conductivity of a macroscopic assembly of nanomaterials is determined through a complex interplay of electronic transport within and between constituent nano-objects. Phonons play dual roles in this situation: their increased populations tend to reduce the conductivity via electron scattering, while they can boost the conductivity by assisting electrons to propagate through the potential-energy landscape. Here, we identified a phonon-assisted coherent electron transport process between neighboring nanotubes in temperature-dependent conductivity measurements on a macroscopic film of armchair single-wall carbon nanotubes. Through atomistic modeling of electronic states and calculations of both electronic and phonon-assisted junction conductances, we conclude that phonon-assisted conductance is the dominant mechanism for observed high-temperature transport in armchair carbon nanotubes. The unambiguous manifestation of coherent intertube dynamics proves a single-chirality armchair nanotube film to be a unique macroscopic solid-state ensemble of nano-objects promising for the development of room-temperature coherent electronic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Progress Towards Correlating Qubit Relaxation Events with Cosmic Rays

We implement Superconducting Qubits, and explore their capabilities as particle detectors. Our goal is to understand how qubits respond to cosmic ray interactions in the device substrate. In particular, we aim to improve the understanding of the underlying physics that causes relaxation. Future work aims to further develop this understanding, and leverage it to improve the sensitivity of qubit-based particle detectors. By using a set of scintillating paddles, we study the impact of cosmic rays in a substrate.

79 ASTRONOMY AND ASTROPHYSICS↗

Two-Level System Spectroscopy from Correlated Multilevel Relaxation in Superconducting Qubits

Transmon qubits are a cornerstone of modern superconducting quantum computing platforms. Temporal fluctuations of energy relaxation in these qubits are widely attributed to microscopic two-level systems (TLSs) in device dielectrics and interfaces, yet isolating individual defects typically relies on tuning the qubit or the TLS into resonance. We demonstrate a novel spectroscopy method for fixed-frequency transmons based on multilevel relaxation: repeated preparation of the second excited state and simultaneous $T_1$ extraction of the first and second excited states reveals characteristic correlations in the decay rates of adjacent transitions. From these correlations we identify one or more dominant TLSs and reconstruct their frequency drift over time. Remarkably, we find that TLSs detuned by $\gtrsim 100\,\mathrm{MHz}$ from the qubit transition can still significantly influence relaxation. The proposed method provides a powerful tool for TLS spectroscopy without the need to tune the transmon frequency, either via a flux-tunable inductor or AC-Stark shifts.

Roy, Tanay [Fermilab] (ORCID:000000019442862X)↗

Millimeter-Wave Superconducting Qubit

Manipulating the electromagnetic spectrum at the single-photon level is fundamental for quantum experiments. In the visible and infrared ranges, this can be accomplished with atomic quantum emitters, and with superconducting qubits such control is extended to the microwave range (below 10 GHz). Meanwhile, the region between these two energy ranges presents an unexplored opportunity for innovation. We bridge this gap by scaling up a superconducting qubit to the millimeter-wave range (near 100 GHz). Working in this energy range greatly reduces sensitivity to thermal noise compared to microwave devices, enabling operation at significantly higher temperatures, up to 1 K. This has many advantages by removing the dependence on rare 3⁢ He for refrigeration, simplifying cryogenic systems, and providing orders-of-magnitude higher cooling power, lending the flexibility needed for novel quantum sensing and hybrid experiments. Using low-loss niobium trilayer junctions, we realize a qubit at 72 GHz cooled to 0.87 K using only 4 ⁢He. We perform Rabi oscillations to establish control over the qubit state, and measure relaxation and dephasing times of 15.8 and 17.4 ns, respectively. This demonstration of a millimeter-wave quantum emitter offers exciting prospects for enhanced sensitivity thresholds in high-frequency photon detection, provides new options for quantum transduction and for scaling up and speeding up quantum computing, enables integration of quantum systems where 3 ⁢He refrigeration units are impractical, and, importantly, paves the way for quantum experiments exploring a novel energy range.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Quantifying Twist Angles in Cuprate Heterostructures with Anisotropic Raman Signatures

Artificially engineered twisted van der Waals (vdW) heterostructures have unlocked new pathways for exploring emergent quantum phenomena and strongly correlated electronic states. Many of these phenomena are highly sensitive to the twist angle, which can be deliberately tuned to tailor the interlayer interactions. This makes the twist angle a critical tunable parameter, emphasizing the need for precise control and accurate characterization during device fabrication. In particular, twisted cuprate heterostructures based on Bi 2 Sr 2 CaCu 2 O 8 + x (BSCCO) have demonstrated angle-dependent superconducting properties, positioning the twist angle as a key tunable parameter. However, the twisted interface is highly unstable under ambient conditions and vulnerable to damage from conventional characterization tools such as electron microscopy or scanning probe techniques. In this work, a fully non-invasive, polarization-resolved Raman spectroscopy approach is introduced for determining twist angles in artificially stacked BSCCO heterostructures. By analyzing twist-dependent anisotropic vibrational Raman modes, particularly utilizing the out-of-plane A 1g vibrational mode of Bi/Sr at ≈116 cm −1 , clear optical fingerprints of the rotational misalignment between cuprate layers are identified. The high-resolution confocal Raman setup, equipped with polarization control and RayShield filtering down to 10 cm −1 , allows for reliable and reproducible measurements without compromising the material's structural integrity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Insulators at fractional fillings in twisted bilayer graphene partially aligned to hexagonal boron nitride

At partial fillings of its flat electronic bands, magic-angle twisted bilayer graphene (MATBG) hosts a rich variety of competing correlated phases that show sample-to-sample variations. Divergent phase diagrams in MATBG are often attributed to the sublattice polarization energy scale, tuned by the degree of alignment of the hexagonal boron nitride (hBN) substrates typically used in van der Waals devices. Unaligned MATBG exhibits unconventional superconductor and correlated insulator phases, while nearly perfectly aligned MATBG/hBN exhibits zero-field Chern insulating phases and lacks superconductivity. Here we use scanning tunneling microscopy and spectroscopy (STM/STS) to observe gapped phases at partial fillings of the flat bands of MATBG in a new intermediate regime of sublattice polarization, observed when MATBG is only partially aligned (θ Gr-hBN ≈ 1.65°) to the underlying hBN substrate. Under this condition, MATBG hosts not only phenomena that naturally interpolate between the two sublattice potential limits, but also unexpected gapped phases absent in either of these limits. At charge neutrality, we observe an insulating phase with a small energy gap (Δ < 5 meV) likely related to weak sublattice symmetry breaking from the hBN substrate. In addition, we observe new gapped phases near fractional fillings ν = ±1/3 and ν = ±1/6, which have not been previously observed in MATBG. Importantly, energy-resolved STS unambiguously identifies these fractional filling states to be of single-particle origin, possibly a result of the super-superlattice formed by two moiré superlattices. Finally, our observations emphasize the power of STS in distinguishing single-particle gapped phases from many-body gapped phases in situations that could be easily confused in electrical transport measurements, and demonstrate the use of substrate engineering for modifying the electronic structure of a moiré flat-band material.

Physics↗

Concept of circular-linear energy recovery accelerator to probe the energy frontier

Energy-frontier accelerators provide powerful tools performing high precision measurements confirming the fundamentals of the physics and broadening new research horizons. Such machines are either driven by circular or linear accelerators. The circular machines, having the centre-of-mass (CM) energy values reaching 200 GeV (for leptons) and above, experience beam energy loss and quality dilution, for example, due to synchrotron radiation, limiting the overall CM energy achievable and requiring a constant energy top-up to compensate the loss and the beam quality dilution. Linear colliders overcome these limitations, while the finite capabilities of generating high average current beams limits the luminosity. This is partially compensated by the quality of the colliding beams. In this work, we suggest a novel design of circular-linear accelerator based on the merging of the “non-emitting”, low-energy storage rings and energy recovery linear accelerators. We suggest using the recently considered dual-axis asymmetric cavities to enable the operation of such a system, and in particular the energy recovery from spent, high-intensity beams. The machine considered, under the scope of the SNOWMASS-2021 initiative, can be potentially used to reach ultimate energy frontiers in high-energy physics as well as to drive next generation light sources. The merging of circular and linear systems, and applications of dual axes cavities, should allow the maintaining of high beam quality, high luminosity, and high energy efficiency, while offering a flexible energy management and opening clear opportunity for reducing the running cost. We note that the numbers shown in the paper are for illustration purpose and can be improved further.

43 PARTICLE ACCELERATORS↗

Exploring thermal equilibria of the Fermi-Hubbard model with variational quantum algorithms

Here, this study investigates the thermal properties of the repulsive Fermi-Hubbard model with chemical potential using variational quantum algorithms, crucial in comprehending particle behaviour within lattices at heightened temperatures in condensed matter systems. Conventional computational methods encounter challenges, especially in managing chemical potential, prompting exploration into Hamiltonian approaches. Despite the promise of quantum algorithms, their efficacy is hampered by coherence limitations when simulating extended imaginary time evolution sequences. To overcome these constraints, this research focuses on optimizing variational quantum algorithms to probe the thermal properties of the Fermi-Hubbard model. Physics-inspired circuit designs are tailored to alleviate coherence constraints, facilitating a more comprehensive exploration of materials at elevated temperatures. Our study demonstrates the potential of variational algorithms in simulating the thermal properties of the Fermi-Hubbard model while acknowledging limitations stemming from error sources in quantum devices and encountering barren plateaus.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

First-principles studies of spin-phonon coupling in monolayer Cr 2 Ge 2 Te 6

Here, we perform systematic first-principles calculations to investigate the spin-phonon coupling (SPC) of Cr 2 Ge 2 Te 6 (CGT) monolayer (ML). It is found that the $E_g$ phonon mode at 211.8 cm –1 may have a SPC as large as 3.19 cm –1 , as it alters the direct exchange interaction across Cr-Cr pairs. The strength of SPC of the CGT ML can be decreased by an in-plane lattice stretch. These results provide useful insights for the understanding of SPC in two-dimensional magnetic semiconductors and may guide the design of spintronic and spin Seebeck materials and devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ab initio theory of free-carrier absorption in semiconductors

The absorption of light by free carriers in semiconductors results in optical loss for all photon wavelengths. Since free-carrier absorption competes with optical transitions across the band gap, it also reduces the efficiency of optoelectronic devices such as solar cells because it does not generate electron-hole pairs. In this work, we develop a first-principles theory of free-carrier absorption taking into account both single-particle excitations and the collective Drude term, and we demonstrate its application to the case of doped Si. Here, we determine the free-carrier absorption coefficient as a function of carrier concentration and we obtain excellent agreement with experimental data. We identify the dominant processes that contribute to free-carrier absorption at various photon wavelengths, and analyze the results to evaluate the impact of this loss mechanism on the efficiency of Si-based optoelectronic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Collective dynamics and defect generation for Wigner crystal ratchets

Here we consider a two-dimensional Wigner crystal coupled to a quasi-one-dimensional asymmetric potential under ac or dc driving. As a function of electron density, substrate strength, and ac amplitude, we find that the system exhibits ordered and disordered pinned and dynamical states. Ratchet effects can appear under an applied ac drive and can be associated with pronounced structural changes from a disordered state to a one-dimensional smecticlike state. We observe a pinned phase, a diodelike ratchet where motion only occurs along the easy direction of the substrate asymmetry, a plastic ratchet where motion occurs in both directions but there is only a net drift in the easy direction, and an elastic ratchet where the system forms a crystal without plastic deformation that can still undergo ratcheting. At high filling, we find that there can be a ratchet reversal in which the net drift is along the hard direction of the substrate asymmetry. For weak disorder, there is an Aubry transition to a floating phase where the ratchet effects are lost. We map out the different dynamical phases as a function of substrate strength, filling, ac amplitude, and ac frequency. The ratchet effect on strong substrates is enhanced by thermal fluctuations, but is destroyed when the fluctuations become too large. Based on our results, we suggest other ways to detect Wigner crystals as well as methods for creating different types of devices to control disordered charge flow.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Highly sensitive spin-flop transition in antiferromagnetic van der Waals material M PS 3 ( M = Ni and Mn)

Recent developments in two-dimensional (2D) magnetism have motivated the search for van der Waals (vdW) magnetic materials to explore magnetic phenomena in the 2D limit. Metal thiophosphates, MPX 3 , are a class of magnetic vdW materials with antiferromagnetic ordering persisting down to the atomically thin limit. The magnetism in this material family has been found to be highly dependent on the choice of transition metal M. In this paper, we have synthesized the intermediate compounds Ni 1–x Mn x PS 3 (0 ≤ x ≤ 1) and investigated their magnetic properties. Our study reveals that the variation of Ni and Mn content in Ni 1–x Mn x PS 3 can efficiently tune the spin-flop transition, likely due to the modulation of the magnetic anisotropy. Such effective tuning offers a promising candidate to engineer 2D magnetism for future device applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A Digital Twin of Scalable Quantum Clouds

Quantum computing has emerged as a transformative technology capable of solving complex problems beyond the limit of classical systems. The rapid development of quantum processors has led to the proliferation of cloud-based quantum computing services offered by platforms such as IBM, Google, and Amazon. These platforms introduce unique challenges in resource allocation, job scheduling, and multi-device orchestration as quantum workloads become increasingly complex. In this work, we present a digital twin of quantum cloud infrastructures: a framework designed to model and simulate the behavior of real quantum cloud systems. Developed in Python using the SimPy discrete-event simulation library, the framework replicates key aspects of quantum cloud environments, including detailed quantum device modeling, job lifecycle management, and job fidelity. It incorporates noise-aware fidelity estimation, making it the first of its kind to simulate superconducting gate-based quantum cloud systems at an administrative level with job fidelity. We present use cases as proof of concept, demonstrating that our quantum cloud simulation framework can act as a digital twin of a quantum cloud and support the modeling and implementation of practical systems.

Luo, Waylon [Kent State University]↗

KIPM Detector Characterization in QUIET

Kinetic Inductance Phonon‑Mediated (KIPM) detectors are superconducting microwave resonators that sense energy depositions in the substrate through a transient shift in their resonant frequency. In this work, I installed new devices in the QUIET cryogenic facility and used a network analyzer to drive them across a range of power levels. At each setting, I measured the transmitted signal and fit it to a simple notch‑filter model, allowing us to extract key performance metrics. Despite the increased noise at low power, the model consistently captured the resonance behavior. I first measured the resonance parameters as a function of RF drive power, then repeated the measurement across a range of temperatures to test whether the device behaved like an MKID. While the notch-filter fits captured the resonance reliably, the observed temperature dependence did not match the expected MKID signature — indicating that these first in-house fabricated chips are not yet functioning as true MKIDs. Overall, this reframes our work as a study of resonance parameter extraction and identification, pointing towards future iterations of device design and fabrication to get the true MKID response.

Savitala, Akash [U. Washington, Seattle (main); Fe↗

A Josephson junction with h -BN tunnel barrier: observation of low critical current noise

Decoherence in quantum bits (qubits) is a major challenge for realizing scalable quantum computing. One of the primary causes of decoherence in qubits and quantum circuits based on superconducting Josephson junctions is the critical current fluctuation. Many efforts have been devoted to suppressing the critical current fluctuation in Josephson junctions. Nonetheless, the efforts have been hindered by the defect-induced trapping states in oxide-based tunnel barriers and the interfaces with superconductors in the traditional Josephson junctions. Motivated by this, along with the recent demonstration of 2D insulator h-BN with exceptional crystallinity and low defect density, we fabricated a vertical NbSe 2 /h-BN/Nb Josephson junction consisting of a bottom NbSe 2 superconductor thin layer and a top Nb superconductor spaced by an atomically thin h-BN layer. Furthermore, we characterized the superconducting current and voltage (I–V) relationships and Fraunhofer pattern of the NbSe 2 /h-BN/Nb junction. Notably, we demonstrated the critical current noise (1/f noise power) in the h-BN-based Josephson device is at least a factor of four lower than that of the previously studied aluminum oxide-based Josephson junctions. Our work offers a strong promise of h-BN as a novel tunnel barrier for high-quality Josephson junctions and qubit applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗