Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “strong motion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Interaction of planetary nebulae with the interstellar medium

The interaction of a moving planetary nebula (PN) with the interstellar medium is considered. The PN shell is compressed first in the direction of the stellar motion. This produces a dipole asymmetry in the surface brightness of the nebula, typically at a nebular density of about 40/cu cm if the nebula is located in the Galactic plane. In the later stages of the interaction, this part of the shell is significantly decelerated with respect to the central star, and the PN becomes strongly asymmetric in shape. This distortion and the subsequent stripping of the nebular gas away from the central star typically occurs at a low nebular density of about 6/cu cm. The morphology of PNs with central stars whose proper motions exceed 0.015 arcsec/yr was examined, and it was found that many of the extended nebulae are interacting with the interstellar medium (ISM). The sample doubles the number of known PNs interacting with the ISM. The morphology of nearby PNs was examined, and a number of strongly asymmetric nebuale were found.

Borkowski, Kazimierz J.↗
NASA NTRS2007

Motion of 3-6 keV Nonthermal Sources Along the Legs of a Flare Loop

Observations of nonthermal X-ray sources me critical to studying electron acceleration and transport in solar flares. Strong thermal emission radiated from the preheated plasma before the flare impulsive phase often makes it difficult to detect low-energy X-ray sources that are produced by relatively low-energy nonthermal electrons. Knowledge of the distribution of these low-energy nonthermal electrons is particularly important in determining the total nonthermal electron energy in solar flares. We report on an 'early impulsive flare' in which impulsive hard X-ray emission was seen early in the flare before the soft X-ray emission had risen significantly, indicating limited plasma pre-heating. Early in the flare, RHESSI < 25 keV images show coronal sources that moved first downward and then upwards along the legs of a flare loop. In particular, the 3-6 keV source appeared as a single coronal source at the start of the flare, and then it involved into two coronal sources moving down along the two legs of the loop. After nearly reaching the two footpoints at the hard X-ray peak, the two sources moved back up to the looptop again. RHESSI images and light curves all indicate that nonthermal emission dominated at energies as low as 3-6 keV. We suggest that the evolution of both the spectral index and the low-energy cutoff of the injected electron distribution could result in the accelerated electrons reaching a lower altitude along the legs of the dense flare loop and hence result in the observed downward and upward motions of the nonthermal sources.

Sui, Linhui↗
DOE OSTI2020

Alloying induces directionally-dependent mobility and alters migration mechanisms of faceted grain boundaries

Faceted grain boundaries exhibit unusual segregation and migration tendencies. To gain a deeper understanding of how solute atoms interact with faceted interfacial structures during migration, this study probes the migration behavior of a faceted Σ11 boundary in Cu doped with Ag atoms. Furthermore, the solutes are found to segregate to the facet with more free volume and strongly reduce boundary velocity in one migration direction, but not the other, due to the presence of a directionally-dependent motion mechanism that can escape solute pinning and therefore speed up migration. Hence, a new mechanism of chemically-induced anisotropy in grain boundary mobility is uncovered by these simulations.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Emission Control from Transition Metal Dichalcogenide Monolayers by Aggregation-Induced Molecular Rotors

Organic–inorganic (O–I) heterostructures, consisting of atomically thin inorganic semiconductors and organic molecules, present synergistic and enhanced optoelectronic properties with a high tunability. Here, we develop a class of air-stable vertical O–I heterostructures comprising a monolayer of transition-metal dichalcogenides (TMDs), including WS 2 , WSe 2 , and MoSe 2 , on top of tetraphenylethylene (TPE) core-based aggregation-induced emission (AIE) molecular rotors. The created O–I heterostructures yields a photoluminescence (PL) enhancement of up to ~950%, ~500%, and ~330% in the top monolayer WS 2 , MoSe 2 , and WSe 2 as compared to PL in their pristine monolayers, respectively. The strong PL enhancement is mainly attributed to the efficient photogenerated carrier process in the AIE luminogens (courtesy of their restricted intermolecular motions in the solid state) and the charge-transfer process in the created type I O–I heterostructures. Moreover, we observe an improvement in photovoltaic properties of the TMDs in the heterostructures including the quasi-Fermi level splitting, minority carrier lifetime, and light absorption. Overall, this work presents an inspiring example of combining stable, highly luminescent AIE-based molecules, with rich photochemistry and versatile applications, with atomically thin inorganic semiconductors for multifunctional and efficient optoelectronic devices.

14 SOLAR ENERGY↗
DOE OSTI2022

Nanoscale inhomogeneity of charge density waves dynamics in La 2-x Sr x NiO 4

While stripe phases with broken rotational symmetry of charge density are known to emerge in doped strongly correlated perovskites, the dynamics and heterogeneity of spatial ordering remain elusive. Here we shed light on the temperature dependent lattice motion and the spatial nanoscale phase separation of charge density wave order in the archetypal striped phase in La 2-x Sr x NiO 4+y (LSNO) perovskite using X-ray photon correlation spectroscopy (XPCS) joint with scanning micro X-ray diffraction (SµXRD). While it is known that the CDW in 1/8 doped cuprates shows a remarkable stability we report the CDW motion dynamics by XPCS in nickelates with an anomalous quantum glass regime at low temperature, T < 65 K, and the expected thermal melting at higher temperature 65 < T < 120 K. The nanoscale CDW puddles with a shorter correlation length are more mobile than CDW puddles with a longer correlation length. The direct imaging of nanoscale spatial inhomogeneity of CDW by scanning micro X-ray diffraction (SµXRD) shows a nanoscale landscape of percolating short range dynamic CDW puddles competing with large quasi-static CDW puddles giving rise to a novel form of nanoscale phase separation of the incommensurate stripes order landscape.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Shear banding, intermittency, jamming, and dynamic phases for skyrmions in inhomogeneous pinning arrays

In this work, we examine driven skyrmion dynamics in systems with inhomogeneous pinning where a strip of strong pinning coexists with a region containing no pinning. For driving parallel to the strip, we find that the initial skyrmion motion is confined to the unpinned region and the skyrmion Hall angle is zero. At larger drives, a transition occurs to a phase in which motion also appears within the pinned region, creating a shear band in the skyrmion velocity, while the skyrmion Hall angle is still zero. As the drive increases further, the flow becomes disordered and the skyrmion Hall angle increases with drive until saturating at the highest drives when the system transitions into a moving crystal phase. The different dynamic phases are associated with velocity and density gradients across the pinning boundaries. We map out the dynamic phases as a function of pinning strength, skyrmion density, and Magnus force strength, and correlate the phase boundaries with features in the velocity-force curves and changes in the local and global ordering of the skyrmion structure. For large Magnus forces, the shear banding instability is replaced by large-scale intermittent flow in the pinned region accompanied by simultaneous motion perpendicular to the direction of the drive, which appears as oscillations in the transport curves. We also examine the case of a drive applied perpendicular to the strip, where we find a jamming effect in which the skyrmion flow is blocked by skyrmion-skyrmion interactions until the drive is large enough to induce plastic flow.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Optimization of the generator coordinate method with machine-learning techniques for nuclear spectra and neutrinoless double- β decay: Ridge regression for nuclei with axial deformation

The generator coordinate method (GCM) is an important tool of choice for modeling large-amplitude collective motion in atomic nuclei. The computational complexity of the GCM increases rapidly with the number of collective coordinates. It imposes a strong restriction on the applicability of the method. In this work, we propose a subspace-reduction algorithm that employs optimal statistical ML models as surrogates for exact quantum-number projection calculations for norm and Hamiltonian kernels. The model space of the original GCM is reduced to a subspace relevant for nuclear low energy spectra and the NME of ground state to ground state 0νββ decay based on the orthogonality condition (OC) and the energy-transition-orthogonality procedure (ENTROP), respectively. For simplicity, the polynomial ridge regression (RR) algorithm is used to learn the norm and Hamiltonian kernels of axially deformed configurations. The efficiency and accuracy of this algorithm are illustrated for 76 Ge and 76 Se by comparing results obtained using the optimal RR models to direct GCM calculations. The low-lying energy spectra of 76 Ge and 76 Se, as well as the 0νββ-decay NME between their ground states, are computed. Furthermore, the results show that the performance of the GCM+OC/ENTROP+RR is more robust than that of the GCM+RR alone, and the former can reproduce the results of the original GCM calculation accurately with a significantly reduced computational cost.

59 ≤ A ≤ 89↗
DOE OSTI2025

Interacting mesons as degrees of freedom in a chiral model

Here, we study the equation of state of hot and dense hadronic matter using an extended chiral mean field (CMF) model framework where the addition is the inclusion of interactions of thermally excited mesons. This is implemented by calculating the in-medium masses of pseudoscalar and vector mesons, obtained through the explicit chiral symmetry-breaking and vector-interaction terms in the Lagrangian, respectively, prior to applying the mean-field approximation. As a result, the in-medium meson contributions generate a feedback term to the CMF’s equations of motion, which then modifies the equation of state. With this improvement, we quantify the effect on the equation of state of strongly interacting matter through comparisons with state-of-the-art lattice QCD results and other hadronic models like the hadron resonance gas model. We find that the results of the updated hadronic CMF model with an improved meson description (mCMF) provide a better agreement with lattice-QCD data for thermodynamic state variables across a wide range of temperatures and baryon chemical potentials.

phenomenology↗
NASA NTRS1978

Distribution of atmospheric ozone and how it is measured

The total amount of ozone in a vertical column has been measured spectroscopically at near ultraviolet and visible wavelengths, using ground- and satellite-based instruments. The vertical distribution of ozone from the surface up to approximately 100 km has been measured by a variety of techniques - chemical and optical - and from a number of observing platforms, including balloon, rocket, and satellite platforms. The various methods presently used for determining the atmospheric ozone distribution are reviewed, along with a discussion of their advantages and disadvantages. The observed average distribution of total ozone for the period 1958-1975 shows the expected geographic and seasonal variations. The variations of total ozone, including hemispheric differences, are clearly associated with large-scale circulation processes in the lower stratosphere. Approximately ten years of observations of the vertical ozone distribution, up through the ozone maximum, also show geographic and seasonal variations strongly related to the lower stratosphere circulation. The distribution above the maximum, however, results from the interaction of photochemistry and stratospheric motions.

London, J.↗
NASA NTRS1979

Asymmetries of the emission lines of QSOs, Seyfert galaxies, and novae

Calculations of the anisotropy of line emission from photoionized clouds, and the resulting asymmetry in the line profiles are discussed. The permitted emission-line profiles of Seyfert galaxies and QSO's often contain more light in the red than in the violet wing, and this asymmetry can arise from self-absorption of the line radiation in an expanding system of optically thick clouds. It is shown that the Balmer line optical depths are large enough to give strongly asymmetric line profiles for pure expansion, but the observed lack of strong asymmetry in the Balmer lines of most Seyfert galaxies suggests that the broad-line widths may result from random motions, or that clouds radiate isotropically. It is concluded that the frequently observed absorption of the violet wing of Lyman-alpha must occur in a surrounding region undergoing systematic outflow, or that the weakness of the Balmer line asymmetries is explained by the Balmer line emission resulting from collisional excitation from n=2.

Ferland, G. J.↗
NASA NTRS1984

Aircraft penetrations of arc cloud lines

Results of a NOAA/NASA research field program (1982-1983) which focused on dynamic and thermodynamic characterization of arc cloud lines are discussed. The program combines research aircraft flights with rapid-scan (3-minute interval) GOES imagery and covers the subcloud layer above and below the density surge line. Strong differences in the dynamic characteristics of air are noted to exist within and above the density surge line (DSL); air motions within the DSL are much more turbulent, with stronger upward and downward motions, than in the subcloud layer above the DSL. The arc cloud lines and the associated DSL regions are concluded to pose an extreme potential hazard to aircraft and Space Shuttle operations.

Sinclair, P. C.↗
NASA NTRS1986

Flare activity, sunspot motions, and the evolution of vector magnetic fields in Hale region 17244

The magnetic and dynamical circumstances leading to the 1B/M4 flare of November 5, 1980 are studied, and a strong association is found between the buildup of magnetic shear and the onset of flare activity within the active region. The development of shear, as observed directly in vector magnetograms, is consistent in detail with the dynamical history of the active region and identifies the precise location of the optical and hard-X-ray kernels of the flare emission.

Neidig, Donald F.↗
NASA NTRS1989

Magnetic flux transport on the sun

Although most of the magnetic flux observed on the sun originates in the low-latitude sunspot belts, this flux is gradually dispersed over a much wider range of latitudes by supergranular convective motions and meridional circulation. Numerical simulations show how these transport processes interact over the 11-year sunspot cycle to produce a strong 'topknot' polar field, whose existence near sunspot minimum is suggested by the observed strength of the interplanetary magnetic field and by the observed areal extent of polar coronal holes. The required rates of diffusion and flow are consistent with the decay rates of active regions and with the rotational properties of the large-scale solar magnetic field.

Wang, Y.-M.↗
NASA NTRS1990

Large-scale motions in a supersonic turbulent boundary layer on a curved surface

This paper presents measurements in a Mach 3 turbulent boundary layer which was subjected to a short region of concave surface curvature. Mean velocity and time-averaged turbulence measurements are presented to indicate the severity of the distortion, although the focus of this study is on how the large-scale organized motions are affected by the distortion. A 12 deg increase in the inclination angle of organized motions is observed, and correlation measurements indicate an increase in the streamwise length scale. VITA conditional sampling is used to identify strong positive streamwise mass-flux gradients as the large-scale structure responsible for the measured structure angle and to determine the ensemble-averaged flowfield associated with the mass-flux gradient structures.

Donovan, J. F.↗
NASA NTRS2000

The NASA Inductrack Model Rocket Launcher at the Lawrence Livermore National Laboratory

The Inductrack magnetic levitation system, developed at the Lawrence Livermore National Laboratory, is being studied for its possible use for launching rockets. Under NASA sponsorship, a small model system is being constructed at the Laboratory to pursue key technical aspects of this proposed application. The Inductrack is a passive magnetic levitation system employing special arrays of high-field permanent magnets (Halbach arrays) on the levitating carrier, moving above a "track" consisting of a close-packed array of shorted coils with which are interleaved with special drive coils. Halbach arrays produce a strong spatially periodic magnetic field on the front surface of the arrays, while canceling the field on their back surface. Relative motion between the Halbach arrays and the track coils induces currents in those coils. These currents levitate the carrier cart by interacting with the horizontal component of the magnetic field. Pulsed currents in the drive coils, synchronized with the motion of the carrier, interact with the vertical component of the magnetic field to provide acceleration forces. Motional stability, including resistance to both vertical and lateral aerodynamic forces, is provided by having Halbach arrays that interact with both the upper and the lower sides of the track coils. In its completed form the model system that is under construction will have a track approximately 100 meters in length along which the carrier cart will be propelled up to peak speeds of Mach 0.4 to 0.5 before being decelerated. Preliminary studies of the parameters of a full-scale system have also been made. These studies address the problems of scale-up, including means to simplify the track construction and to reduce the cost of the pulsed-power systems needed for propulsion.

Tung, L. S.↗
NASA NTRS1997

Jerk Minimization Method for Vibration Control in Buildings

In many vibration minimization control problems for high rise buildings subject to strong earthquake loads, the emphasis has been on a combination of minimizing the displacement, the velocity and the acceleration of the motion of the building. In most cases, the accelerations that are involved are not necessarily large but the change in them (jerk) are abrupt. These changes in magnitude or direction are responsible for most building damage and also create discomfort like motion sickness for inhabitants of these structures because of the element of surprise. We propose a method of minimizing also the jerk which is the sudden change in acceleration or the derivative of the acceleration using classical linear quadratic optimal controls. This was done through the introduction of a quadratic performance index involving the cost due to the jerk; a special change of variable; and using the jerk as a control variable. The values of the optimal control are obtained using the Riccati equation.

Abatan, Ayo O.↗
NASA NTRS2017

Mathematical Modeling of Electrodynamics Near the Surface of Earth and Planetary Water Worlds

An interesting feature of planetary bodies with hydrospheres is the presence of an electrically conducting shell near the global surface. This conducting shell may typically lie between relatively insulating rock, ice, or atmosphere, creating a strong constraint on the flow of large-scale electric currents. All or parts of the shell may be in fluid motion relative to main components of the rotating planetary magnetic field (as well as the magnetic fields due to external bodies), creating motionally-induced electric currents that would not otherwise be present. As such, one may expect distinguishing features in the types of electrodynamic processes that occur, as well as an opportunity for imposing specialized mathematical methods that efficiently address this class of application. The purpose of this paper is to present and discuss such specialized methods. Specifically, thin-shell approximations for both the electrodynamics and fluid dynamics are combined to derive simplified mathematical formulations describing the behavior of these electric currents as well as their associated electric and magnetic fields. These simplified formulae allow analytical solutions featuring distinct aspects of the thin-shell electrodynamics in idealized cases. A highly efficient numerical method is also presented that is useful for calculations under inhomogeneous parameter distributions. Finally, the advantages as well as limitations in using this mathematical approach are evaluated. This evaluation is presented primarily for the generic case of bodies with water worlds or other thin spherical conducting shells. More specific discussion is given for the case of Earth, but also Europa and other satellites with suspected oceans.

Tyler, Robert H.↗
DOE OSTI2023

Real-Time Fault Tracking and Ground Motion Prediction for Large Earthquakes With HR-GNSS and Deep Learning

Earthquake early warning (EEW) systems aim to forecast the shaking intensity rapidly after an earthquake occurs and send warnings to affected areas before the onset of strong shaking. The system relies on rapid and accurate estimation of earthquake source parameters. However, it is known that source estimation for large ruptures in real-time is challenging, and it often leads to magnitude underestimation. In a previous study, we showed that machine learning, HR-GNSS, and realistic rupture synthetics can be used to reliably predict earthquake magnitude. This model, called Machine-Learning Assessed Rapid Geodetic Earthquake model (M-LARGE), can rapidly forecast large earthquake magnitudes with an accuracy of 99%. Here, we expand M-LARGE to predict centroid location and fault size, enabling the construction of the fault rupture extent for forecasting shaking intensity using existing ground motion models. We test our model in the Chilean Subduction Zone with thousands of simulated and five real large earthquakes. The result achieves an average warning time of 40.5 s for shaking intensity MMI4+, surpassing the 34 s obtained by a similar GNSS EEW model. Our approach addresses a critical gap in existing EEW systems for large earthquakes by demonstrating real-time fault tracking feasibility without saturation issues. This capability leads to timely and accurate ground motion forecasts and can support other methods, enhancing the overall effectiveness of EEW systems. Additionally, the ability to predict source parameters for real Chilean earthquakes implies that synthetic data, governed by our understanding of earthquake scaling, is consistent with the actual rupture processes.

58 GEOSCIENCES↗