SEARCH · Engineering Papers

Results for “steering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

All sources NASA NTRS DOE OSTI

NASA NTRS1984

Phased-Antenna-Array Conical Scanning

Antenna pointing faster than mechanical scanning. Three antenna phased array connected to receiving signal-processing system through two phase-shifting networks. Two networks simultaneously steer phased array in two slightly-different beam directions; one for scanning, one for tracking. Technique has many uses in military and civilian radar, principally in tracking aircraft, balloonborne weather instruments, and other moving signal sources or reflectors.

Lesh, J. R.↗

NASA NTRS1982

Ion accelerator systems for high power 30 cm thruster operation

Two and three-grid accelerator systems for high power ion thruster operation were investigated. Two-grid translation tests show that over compensation of the 30 cm thruster SHAG grid set spacing the 30 cm thruster radial plasma density variation and by incorporating grid compensation only sufficient to maintain grid hole axial alignment, it is shown that beam current gains as large as 50% can be realized. Three-grid translation tests performed with a simulated 30 cm thruster discharge chamber show that substantial beamlet steering can be reliably affected by decelerator grid translation only, at net-to-total voltage ratios as low as 0.05.

Aston, G.↗

NASA NTRS1982

Ion accelerator systems for high power 30-cm thruster operation

An investigation of two- and three-grid accelerator systems for high power ion thruster operation has been performed. Two-grid translation tests show that overcompensation of the 30-cm thruster SHAG (Small Hole Accelerator Grid) leads to a premature impingement limit. By better matching the SHAG grid set spacing to the 30-cm thruster radial plasma density variation and by incorporating grid compensation only sufficient to maintain grid hole axial alignment, it is shown that beam current gains as large as 50% can be realized. Three-grid translation tests performed with a simulated 30-cm thruster discharge chamber show that substantial beamlet steering can be reliably affected by decelerator grid translation only, at net-to-total voltage ratios as low as 0.05.

Aston, G.↗

NASA NTRS1982

The baroclinic instability of highly structured one-dimensional basic states

A frictionless, adiabatic, quasi-geostrophic model on a beta-plane was employed to examine the baroclinic instability of highly structured one-dimensional basic states. Definitions of the model eigenvalue equation, the boundary conditions, and the fluxes and energetics are provided, and highly structured average wind speed and temperature profiles were selected to represent a wide range of latitudes. Attention was given to the instability source, wavelength, growth rate, phase velocity, steering levels, and the vertical structure of their amplitude, phase, meridional entropy transport, and conversion of potential-to-kinetic energy. Green modes, Charney-Eady modes, and the modes defined in the paper are examined in connection with the highly structured profiles. The eigenvalue approach is shown to be superior to the numerical time integration approach and necessary conditions for instabilities are defined.

Fullmer, J. W. A.↗

NASA NTRS1983

Targeting space station technologies

NASA's Space Station Technology Steering Committee has undertaken the definition of the level of technology that is desirable for use in the initial design and operation of an evolutionary, long service life space station, as well as the longer term technology required for the improvement of capabilities. The technology should initially become available in 1986, in order to support a space station launch as early as 1990. Toward this end, the committee seeks to assess technology forecasts based on existing research and testing capacity, and then plan and monitor a program which will move current technology to the requisite level of sophistication and reliability. The Space Shuttle is assumed to be the vehicle for space station delivery, assembly, and support on a 90-day initial cycle. Space station tasks will be military, commercial, and scientific, including on-orbit satellite servicing.

Olstad, W. B.↗

NASA NTRS1982

Space Shuttle Orbiter auxiliary power unit

The Space Shuttle Orbiter auxiliary power units (APUs) provide hydraulic power for the Orbiter vehicle control surfaces (rudder/speed brake, body flap, and elevon actuation systems), main engine gimbaling during ascent, landing gear deployment and steering and braking during landing. Operation occurs during launch/ascent, in-space exercise, reentry/descent, and landing/rollout. Operational effectiveness of the APU is predicated on reliable, failure-free operation during each flight, mission life (reusability) and serviceability between flights (turnaround). Along with the accumulating flight data base, the status and results of efforts to achieve these long-run objectives is presented.

Mckenna, R.↗

NASA NTRS1983

Hydrazine gas generator performance on Space Shuttle

The design, functions, performance, and applications of the hydrazine gas generators (GG) on the STS are detailed. The GGs provide gas horse power for the APUs that drive the hydraulic pumps on the SRBs, which have two cross-linked systems. The Orbiter has three-cross-linked APU systems, used for gimballing the main engine and booster nozzles, actuating the main engine fuel valves and the ET umbilical disconnect, actuation of the control surfaces, and powering the landing gear, brakes, and nose wheel steering. The major design components of the Orbiter GGs are an injector, a catalyst bed, a decomposition chamber, an exhaust nozzle, and an interface structure, with the main structural material being Hasteloy B. Hydrazine injected and dispersed into the catalyst bed decomposes into gas and exits for expansion in an APU turbine. Twenty-six GGs have flown on missions STS-1 through STS-6 with over three tons of hydrazine having been expended over 44 hr of operations, as no refurbishment to that point was necessary.

Patterson, I. J.↗

NASA NTRS1982

Onboard processing for a 30/20 GHz communications satellite

A systems configuration for the baseband processor for a TDMA communications satellite utilizing the 30 GHz uplink and 20 GHz downlink bands will be discussed. The baseband processor functions include QPSK burst demodulation, convolutional decoding, data routing, encoding, QPSK modulation, and antenna steering. The performance of the burst demodulator will be examined. Power and weight estimates for the baseband processor will be presented.

Reisenfeld, S.↗

NASA NTRS1983

Remote sensing of tropospheric gases and aerosols with airborne DIAL system

The multipurpose airborne DIAL system developed at NASA Langley Research Center is characterized, and the published results of tropospheric O3, H2O, and aerosol-backscatter remote-sensing experiments performed in 1980 and 1981 are summarized. The system comprises two tunable dye lasers pumped by frequency-doubled Nd:YAG lasers, dielectric-coated steering optics, a 36-cm-diameter Cassegrain receiver telescope, gateable photomultiplier tubes, and a minicomputer data-processing unit for real-time calculation of gas concentrations and backscattering profiles. The transmitted energy of the 100-microsec-separated dye-laser pulses is 40, 80, or 50 mJ/pulse at around 300, 600, or 720-nm wavelength, respectively. Good agreement was found between DIAL-remote-sensed and in-situ H2O and O3 profiles of the lower troposphere and O3 profiles of the tropopause region, and the usefulness of DIAL backscattering measurements in the study of boundary-layer and tropospheric dynamics is demonstrated. The feasibility of DIAL sensing of power-plant or urban plume SO2, of urban-area (or rural-area column-content) NO2, and of temperature and H2O (simultaneously using a third laser) has been suggested by simulation studies.

Browell, E. V.↗

NASA NTRS1983

Semiconductor optoelectronic devices for free-space optical communications

The properties of individual injection lasers are reviewed, and devices of greater complexity are described. These either include or are relevant to monolithic integration configurations of the lasers with their electronic driving circuitry, power combining methods of semiconductor lasers, and electronic methods of steering the radiation patterns of semiconductor lasers and laser arrays. The potential of AlGaAs laser technology for free-space optical communications systems is demonstrated. These solid-state components, which can generate and modulate light, combine the power of a number of sources and perform at least part of the beam pointing functions. Methods are proposed for overcoming the main drawback of semiconductor lasers, that is, their inability to emit the needed amount of optical power in a single-mode operation.

Katz, J.↗

NASA NTRS1985

Semiconductor Laser Phased Array

Oscillations synchronized and modulated individually for beam steering. Phased array of GaAs infrared lasers put out powerful electronically-steerable coherent beam. Fabricated as integrated circuit on GaAs chip, new device particularly suited to optical communications, optical data processing and optical detection and ranging systems.

Katz, J.↗

NASA NTRS1985

Hybrid-Vehicle Transmission System

Continuously-variable transmission system for hybrid vehicles couples internal-combustion engine and electric motor section, either individually or in parallel, to power vehicle wheels during steering and braking.

Lupo, G.↗

NASA NTRS1983

Centaur D-1A guidance/software system

The main body of this paper describes the evolution of the Centaur D-1A Guidance and Software System. Specifically, the performance of the explicit guidance equations, using a linear tangent steering law. Inherent flexibility exists in the equations in that they have multimission capability. They can accommodate both Earth-orbital and Earth-escape missions with either one or two Centaur burns. They can also guide for multi-burn orbital missions. The Centaur performance is indicated in terms of optimality (propellant usage), accuracy, flexibility and computer requirements. In the course of the Centaur Guidance development substantial changes and improvements have been made and more improvements are on the way for the Shuttle/Centaur Guidance. It is the intent of this paper to describe, provide insight into, and identify certain unique aspects of the individual Centaur flight profiles. Mission profile(s) are described narratively with some numerical data given in cases where it may be useful.

Gordan, A. L.↗

NASA NTRS1983

Microstrip antennas for SAR applications

Current and future microstrip antenna technology development for Spaceborne Synthetic Aperture Radars (SAR) are summarized. Some of the electrical and mechanical characteristics of previously and presently developed microstrip SAR antennas are shown. The SEASAT, the SIR-A and presently the SIR-B antennas are all designed for operation at L-band with approximately 22 MHz of bandwidth. The antennas have linear polarization with minimum of 20 dB of polarization purity. Both the SEASAT and SIR-A antennas were designed for a fixed pointing angle of 20.5 deg and 47 deg, respectively. However, the SIR-B has the added feature of mechanical beam steering in elevation (range). With the exception of different mechanical characteristics, it is concluded that present spaceborne SAR antennas have only single frequency and single polarization performance. The lack of large spaceborne antennas operating at the higher degree of fabrication tolerance required for a given performance; and larger feed and radiating element losses.

Haddad, H. A.↗

NASA NTRS1984

Space Station Technology, 1983

This publication is a compilation of the panel summaries presented in the following areas: systems/operations technology; crew and life support; EVA; crew and life support: ECLSS; attitude, control, and stabilization; human capabilities; auxillary propulsion; fluid management; communications; structures and mechanisms; data management; power; and thermal control. The objective of the workshop was to aid the Space Station Technology Steering Committee in defining and implementing a technology development program to support the establishment of a permanent human presence in space. This compilation will provide the participants and their organizations with the information presented at this workshop in a referenceable format. This information will establish a stepping stone for users of space station technology to develop new technology and plan future tasks.

Wright, R. L.↗

NASA NTRS1984

First Results of GPS Time Transfer to Australia

A global positioning system (GPS) time transfer unit was installed at Tidbinbilla Deep Space Communications Complex of the DSN in June 1983. It was used to estimate the relationship to UTC(USNO MC) of the Tidbinbilla frequency and time system TID(FTS) based on a hydrogen maser, and to estimate the performance of the Australian free-running time scale UTC(AUS). Data from the first 3 months were analyzed three ways: by two-hop common view using JPL as intermediary; by long-arc interpolation of measurements against space vehicle clocks; and by long arc interpolation of GPS-Time results. Residuals from a single quadratic fit through 3 months of UTC(USNO MC) -TID(FTS) results were white noise with standard error 15 ns, and a flying clock measurement gave 70 ns agreement. A straight line fit through results UTC(USNO MC) - UTC(AUS) gave 90 ns standard error and 120 ns agreement. It is proposed to use the GPS measurements to steer UTC(AUS) to UTC(BIH), and to rename the existing time scale TA(AUS).

Mck.luck, J.↗

NASA NTRS1984

Nasa's Emerging Productivity Program

The goals, membership, and organizational structure of the NASA Productivity Steering Committee are described as well as steps taken to make NASA a leader in the development and application of productivity and quality concepts at every level of agency management. The overall strategy for the Productivity Improvement and Quality Enhancement (PIQE) Program is through employee involvement, both civil servant and contractor, in all phases of agency-wide activity. Elements of the PIQE program and initial thrusts are examined.

Braunstein, D. R.↗

NASA NTRS1983

Characteristics of Sunset radar

Located in a narrow canyon 15 km west of Boulder, Colorado, the Sunset pulsed Doppler radar was the first radar designed and constructed specifically as a VHF ST radar. The antenna system is a phased array of coaxial-colinear dopoles with computer-controlled phase shifters for each line of dipoles. It operates at a frequency of 40.475 MHz and a wavelength of 7.41M. Peak transmitter power is 100 kW. Aperture efficiency is 0.58 and resistive loss is 0.30 for its 3600 sq m area. The practical steering rate is 1 record/minute/position to any arbitrary antenna beam position. The first clear-air turbulence echoes and wind velocity measurements were obtained in 1974. Significant accomplishments are listed.

Green, J. L.↗