Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “stability constraint”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Formation of singularities on the charged surface of a liquid-helium layer with a finite depth

The dynamics of the development of an instability of a charged surface of a liquid-helium layer with a finite depth is investigated. The equations describing the evolution of the free surface are derived with the use of conformal variables for the case in which the charge completely screens the electric field above the liquid. A model of the evolution of a spatially localized perturbation of a liquid-helium surface is proposed for the strong-field limit where the dynamics of the liquid is predominantly determined by the effect of electrostatic forces. This model describes the development of an instability of the initially planar boundary to the point of the formation of cuspidal dimples. The limit of an infinitely deep liquid is considered. The stability of the previously revealed liquid flow regime described by the Laplacian growth equations is proved without significant constraints on the surface geometry.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Application of a ground based minicomputer system for real time, closed loop control of remotely piloted aircraft models used in stall/spin research

The paper describes a minicomputer-based, real-time closed loop remote control system at NASA Langley outdoor facility which is used to determine the stall/departure/spin characteristics of high-performance aircraft. The experiments are conducted with 15% dynamically scaled, unpowered models that are dropped from 3000 m and ground controlled. The effects of time delays and sampling rates on the stability of the control system and the selection of digital algorithms to meet frequency response and real time constraints are examined. Also described is the implementation of the modular software for the flexible programming of multi-axis control laws.

Montoya, R. J.↗

Flexible system model reduction and control system design based upon actuator and sensor influence functions

A model reduction technique based on aggregation with respect to sensor and actuator influence functions rather than modes is presented for large systems of coupled second-order differential equations. Perturbation expressions which can predict the effects of spillover on both the reduced-order plant model and the neglected plant model are derived. For the special case of collocated actuators and sensors, these expressions lead to the derivation of constraints on the controller gains that are, given the validity of the perturbation technique, sufficient to guarantee the stability of the closed-loop system. A case study demonstrates the derivation of stabilizing controllers based on the present technique. The use of control and observation synthesis in modifying the dimension of the reduced-order plant model is also discussed. A numerical example is provided for illustration.

Yam, Yeung↗

Rotor blade dynamic design

The rotor dynamic design considerations are essentially limitations on the vibratory response of the blades which in turn limit the dynamic excitation of the fuselage by forces and moments transmitted to the hub. Quantities which are associated with the blade response and which are subject to design constraints are discussed. These include blade frequencies, vertical and inplane hub shear, rolling and pitching moments, and aeroelastic stability margin.

Pritchard, Jocelyn I.↗

The 27-28 October 1986 FIRE IFO cirrus case study - Cloud optical properties determined by High Spectral Resolution Lidar

The High Spectral Resolution Lidar (HSRL) was operated from a roof-top site in Madison, Wisconsin. The transmitter configuration used to acquire the case study data produces about 50 mW of ouput power and achieved eye-safe, direct optical depth, and backscatter cross section measurements with 10 min averaging times. A new continuously pumped, injection seeded, frequency doubled Nd:YAG laser transmitter reduces time-averaging constraints by a factor of about 10, while improving the aerosol-molecular signal separation capabilities and wavelength stability of the instrument. The cirrus cloud backscatter-phase functions have been determined for the October 27-28, 1986 segment of the HSRL FIRE dataset. Features exhibiting backscatter cross sections ranging over four orders of magnitude have been observed within this 33 h period. During this period, cirrus clouds were observed with optical thickness ranging from 0.01 to 1.4. The altitude relationship between cloud top and bottom boundaries and the optical center of the cloud is influenced by the type of formation observed.

Grund, C. J.↗

Management by Trajectory: Improving Predictability for Airspace Operations

In the present-day National Airspace System, the air traffic management system attempts to predict the trajectory for each flight based on the flight plan and scheduled or controlled departure time. However, gaps in trajectory data and models, coupled with tactical control actions that are not communicated to automation systems or other stakeholders, lead to trajectory predictions that are less accurate than they could be. This affects traffic flow management performance. Management by Trajectory (MBT) is a NASA concept for air traffic management in which every flight operates in accordance with a 4D trajectory that is negotiated between the airspace user and the FAA to account for the airspace user’s goals while complying with NAS constraints. The primary benefit of MBT is an improvement in system performance due to increased trajectory predictability and stability, which result from managing traffic in all four dimensions (2D route, vertical, and time), ensuring that changes to the flight’s trajectory are incorporated into the assigned trajectory, and utilizing improved time or arrival control standards. Importantly, the performance improvements support increasing efficiency without increasing collision risk. This paper provides an overview of MBT and describes fast-time simulation results evaluating the safety, performance, and efficiency effects of MBT.

Fernandes, Alicia B.↗

A Hall sensor array for internal current profile constraint

Measurements of the internal distribution of B in magnetically confined plasmas are required to obtain current profiles via equilibrium reconstruction with sufficient accuracy to challenge stability theory. A 16-channel linear array of InSb Hall effect sensors with 7.5 mm spatial resolution has been constructed to directly measure internal B{sub z}(R,t) for determination of J({psi},t) associated with edge-localized peeling mode instabilities in the Pegasus Toroidal Experiment. The diagnostic is mounted in an electrically isolated vacuum assembly which presents a slim, cylindrical profile ({approx}1 cm outside diameter) to the plasma using graphite as a low-Z plasma facing component. Absolute calibration of the sensors is determined via in situ cross-calibration against existing magnetic pickup coils. Present channel sensitivities are of order of 0.25 mT. Internal measurements with bandwidth of {<=}25 kHz have been obtained without measurable plasma perturbation. They resolve n=1 internal magnetohydrodynamics and indicate systematic variation in J({psi}) under different stability conditions.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Consensus-Based Control and Optimization of Power System Inertia

The integration of distributed energy resources (DERs), such as solar, wind, and energy storage systems, into power grids through inverter-based resources reduces power system inertia, leading to faster frequency dynamics and potential grid instability. To address this challenge, this paper proposes a distributed, consensus-based approach for the real-time control and optimization of inertia sources (synchronous generators and/or DERs) during system disturbances, enhancing both system stability and economic performance. The distributed control and optimization approach assumes each inertia source exchanges information solely with its neighbor ones, making it easily scalable to large power grid networks. The impacts of the communication connectivity among the inertia sources as well as their generation capacity limits on the distributed approach are investigated. We also demonstrate the approach’s robustness in scenarios involving communication time delays and packet losses, validating its effectiveness through numerical simulations on a 4-bus test system and a two-area 8-bus test system.

Power system inertia↗

Polar Metals by Geometric Design

Gauss's law dictates that the net electric field inside a conductor in electrostatic equilibrium is zero by effective charge screening; free carriers within a metal eliminate internal dipoles that may arise owing to asymmetric charge distributions(1). Quantum physics supports this view(2), demonstrating that delocalized electrons make a static macroscopic polarization, an ill-defined quantity in metals(3)-it is exceedingly unusual to find a polar metal that exhibits long-range ordered dipoles owing to cooperative atomic displacements aligned from dipolar interactions as in insulating phases(4). Here we describe the quantum mechanical design and experimental realization of room-temperature polar metals in thin-film ANiO(3) perovskite nickelates using a strategy based on atomic-scale control of inversion-preserving (centric) displacements(5). We predict with ab initio calculations that cooperative polar A cation displacements are geometrically stabilized with a non-equilibrium amplitude and tilt pattern of the corner-connected NiO6 octahedra-the structural signatures of perovskites-owing to geometric constraints imposed by the underlying substrate. Heteroepitaxial thin-films grown on LaAlO3 (111) substrates fulfil the design principles. We achieve both a conducting polar monoclinic oxide that is inaccessible in compositionally identical films grown on (001) substrates, and observe a hidden, previously unreported(6-10), non-equilibrium structure in thin-film geometries. We expect that the geometric stabilization approach will provide novel avenues for realizing new multifunctional materials with unusual coexisting properties.

Kim, T. H.↗

Effects of Spaceflight on the Modulation of Shock Wave Transmission to the Head During Locomotion

The ability to maintain gaze stability during locomotion requires the normal function and integration of the vestibulo-ocular reflex, vestibulo and cervico-colic reflexes with effective coordination between the trunk and lower limb segments. One hypothesized constraint on the coordination between segments during locomotion is the regulation of energy flow or shock wave transmissions through the body at high impact phases with the support surface. Allowing these excessive transmissions of energy to the head may result in compromised gaze stability during locomotion. The aim of this study was to determine the effects of microgravity adaptation on the transmissibility of shock wave to the head during locomotion. Before and after spaceflight (3-6 months) six subjects walked (6.4 km/h) on a motorized treadmill while fixating their gaze on a centrally located earth-fixed target. Triaxial accelerometers mounted on the shank and the head measured the shock wave transmission through the body during locomotion. During postflight locomotion the peak shock at the shank and the head were significantly reduced, however, the ratio of peak head to shank shock was significantly increased. These results indicate that exposure to spaceflight causes adaptive modifications in the short-latency vestibulospinal head stabilization responses required to compensate for the rapid shocks transmitted to the head during locomotion. This study was supported by NASA.

Mulavara, Ajitkumar P.↗

Neutron Star Observations and the Equation of State

This talk reviews limits to the properties of neutron stars established from physical considerations such as causality and stability. In addition, it summarizes recent attempts to determine realistic bounds to the equation of state (EOS) from a simultaneous measurement of a neutron star's mass and radius. Observational constraints on the neutron star radius from thermal emission, seismology, spin-orbit coupling, and tidal effects in mergers are discussed. Possible constraints from neutron star cooling, including neutrino emissions, are discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Pedestal stability comparison and ITER pedestal prediction

The pressure at the top of the edge transport barrier (or 'pedestal height') strongly impacts fusion performance, while large edge localized modes (ELMs), driven by the free energy in the pedestal region, can constrain material lifetimes. Accurately predicting the pedestal height and ELM behavior in ITER is an essential element of prediction and optimization of fusion performance. Investigation of intermediate wavelength MHD modes (or 'peeling ballooning' modes) has led to an improved understanding of important constraints on the pedestal height and the mechanism for ELMs. The combination of high-resolution pedestal diagnostics, including substantial recent improvements, and a suite of highly efficient stability codes, has made edge stability analysis routine on several major tokamaks, contributing both to understanding, and to experimental planning and performance optimization. Here we present extensive comparisons of observations to predicted edge stability boundaries on several tokamaks, both for the standard (Type I) ELM regime, and for small ELM and ELM-free regimes. We further discuss a new predictive model for the pedestal height and width (EPED1), developed by self-consistently combining a simple width model with peeling-ballooning stability calculations. This model is tested against experimental measurements, and used in initial predictions of the pedestal height for ITER.

Snyder, P.↗

Enhancing protein stability with extended disulfide bonds

Significance This work describes a facile system for incorporating noncanonical amino acids containing long side-chain thiols using an expanded genetic code. These amino acids begin to overcome the distance and geometric constraints of the cysteine disulfide and can pair with cysteines to cross-link more remote sites in proteins. To demonstrate this notion, we constructed a library of random β-lactamase mutants containing these noncanonical amino acids and grew them at nonpermissive temperatures. We identified a mutant enzyme that is cross-linked by one such extended disulfide bond that has significantly enhanced thermal stability. This study suggests that an expanded set of amino acid building blocks can provide novel solutions to evolutionary challenges.

59 BASIC BIOLOGICAL SCIENCES↗

Use of protein cross-linking and radiolytic footprinting to elucidate PsbP and PsbQ interactions within higher plant Photosystem II

We used protein cross-linking and radiolytic footprinting coupled with high-resolution mass spectrometry to examine the structure of PsbP and PsbQ when they are bound to Photosystem II, in this paper. In its bound state, the N-terminal 15-amino-acid residue domain of PsbP, which is unresolved in current crystal structures, interacts with domains in the C terminus of the protein. These interactions may serve to stabilize the structure of the N terminus and may facilitate PsbP binding and function. These interactions place strong structural constraints on the organization of PsbP when associated with the Photosystem II complex. Additionally, amino acid residues in the structurally unresolved loop 3A domain of PsbP ( 90 K– 107 V), 93 Y and 96 K, are in close proximity (≤11.4 Å) to the N-terminal 1E residue of PsbQ. Our findings are the first, to our knowledge, to identify a putative region of interaction between these two components. Cross-linked domains within PsbQ were also identified, indicating that two PsbQ molecules can interact in higher plants in a manner similar to that observed by Liu et al. [(2014) Proc Natl Acad Sci 111(12):4638–4643] in cyanobacterial Photosystem II. Furthermore, this interaction is consistent with either intra-Photosystem II dimer or inter-Photosystem II dimer models in higher plants. Finally, OH• produced by synchrotron radiolysis of water was used to oxidatively modify surface residues on PsbP and PsbQ. Finally, domains on the surface of both protein subunits were resistant to modification, indicating that they were shielded from water and appear to define buried regions that are in contact with other Photosystem II components.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Sgoldstino inflation

We discuss the possibility that inflation is driven by the sgoldstino, the superpartner of the goldstino. Unlike in generic supergravity scenarios, the sgoldstino decouples from all other fields in the theory, which allows for a simple and robust inflationary model. We argue that the two-field model given by this single complex scalar correctly captures the full multifield inflationary phenomenology. On the other hand, the assumption of stability, along the entire inflationary trajectory, of the supersymmetry-preserving sector that is integrated out leads to supplementary constraints on the parent supergravity. We investigate small field, large field and hybrid sgoldstino inflation scenarios and provide some working examples. They are subject to the usual fine-tuning issues that are common to all supergravity models of inflation. We comment on some other recently proposed sgoldstino inflation models.

79 ASTRONOMY AND ASTROPHYSICS↗

Revisiting perturbations in extended quasidilaton massive gravity

In this work we study the theory of extended quasidilaton massive gravity together with the presence of matter fields. After discussing the homogeneous and isotropic fully dynamical background equations, which governs the exact expansion history of the universe, we consider small cosmological perturbations around these general FLRW solutions. The stability of tensor, vector and scalar perturbations on top of these general background solutions give rise to slightly different constraints on the parameters of the theory than those obtained in the approximative assumption of the late-time asymptotic form of the expansion history, which does not correspond to our current epoch. This opens up the possibility of stable FLRW solutions to be compared with current data on cosmic expansion with the restricted parameter space based on theoretical ground.

79 ASTRONOMY AND ASTROPHYSICS↗

Machine learning method for enforcing variable independence in background estimation with LHC data: ABCDisCoTEC

A novel solution is presented for the problem of estimating the backgrounds of a signal search using observed data while simultaneously maximizing the sensitivity of the search to the signal. The 'ABCD method' provides a reliable framework for background estimation by partitioning events into one signal-enhanced region (A) and three background-enhanced control regions (B, C, and D) via two smoothly varying, statistically independent variables. In practice, even slight correlations between the two variables can significantly undermine the method's performance. Thus, choosing appropriate variables by hand can present a formidable challenge, especially when background and signal differ only subtly. To address this issue, the ABCD with distance correlation (ABCDisCo) method was developed to construct two learned variables via a neural network trained to provide strong signal-background discrimination with small values of the distance correlation (DisCo) measure between the two learned variables. However, relying solely on minimizing the DisCo can result in learned variables that may not have distributions of background events that are smoothly varying and localized at extreme values, as necessary for the validity of the background estimation. The ABCDisCo training enhanced with closure (ABCDisCoTEC) method is introduced to solve this issue by directly minimizing the nonclosure, expressed as a dedicated differentiable loss term. This extended method is applied to a data set of proton-proton collisions at a center-of-mass energy of 13 TeV recorded by the CMS detector at the CERN Large Hadron Collider. Additionally, given the complexity of the minimization problem with constraints on multiple loss terms, the modified differential method of multipliers is applied and shown to greatly improve the stability and robustness of the ABCDisCoTEC method, compared to grid search hyperparameter optimization procedures.

Hayrapetyan, Aram [Yerevan Phys. Inst.]↗

Black holes and neutron stars in the generalized tensor-vector-scalar theory

Bekenstein's tensor-vector-scalar (TeVeS) theory has had considerable success as a relativistic theory of modified Newtonian dynamics. However, recent work suggests that the dynamics of the theory are fundamentally flawed and numerous authors have subsequently begun to consider a generalization of TeVeS where the vector field is given by an Einstein-Aether action. Herein, I develop strong-field solutions of the generalized TeVeS theory, in particular exploring neutron stars as well as neutral and charged black holes. I find that the solutions are identical to the neutron star and black hole solutions of the original TeVeS theory, given a mapping between the parameters of the two theories, and hence provide constraints on these values of the coupling constants. I discuss the consequences of these results in detail including the stability of such spacetimes as well as generalizations to more complicated geometries.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗