Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “spectral element method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

Model atmospheres for M (sub)dwarf stars. 1: The base model grid

We have calculated a grid of more than 700 model atmospheres valid for a wide range of parameters encompassing the coolest known M dwarfs, M subdwarfs, and brown dwarf candidates: 1500 less than or equal to T(sub eff) less than or equal to 4000 K, 3.5 less than or equal to log g less than or equal to 5.5, and -4.0 less than or equal to (M/H) less than or equal to +0.5. Our equation of state includes 105 molecules and up to 27 ionization stages of 39 elements. In the calculations of the base grid of model atmospheres presented here, we include over 300 molecular bands of four molecules (TiO, VO, CaH, FeH) in the JOLA approximation, the water opacity of Ludwig (1971), collision-induced opacities, b-f and f-f atomic processes, as well as about 2 million spectral lines selected from a list with more than 42 million atomic and 24 million molecular (H2, CH, NH, OH, MgH, SiH, C2, CN, CO, SiO) lines. High-resolution synthetic spectra are obtained using an opacity sampling method. The model atmospheres and spectra are calculated with the generalized stellar atmosphere code PHOENIX, assuming LTE, plane-parallel geometry, energy (radiative plus convective) conservation, and hydrostatic equilibrium. The model spectra give close agreement with observations of M dwarfs across a wide spectral range from the blue to the near-IR, with one notable exception: the fit to the water bands. We discuss several practical applications of our model grid, e.g., broadband colors derived from the synthetic spectra. In light of current efforts to identify genuine brown dwarfs, we also show how low-resolution spectra of cool dwarfs vary with surface gravity, and how the high-regulation line profile of the Li I resonance doublet depends on the Li abundance.

Allard, France↗
NASA NTRS1998

Multi-Bandwidth Frequency Selective Surfaces for Near Infrared Filtering: Design and Optimization

Frequency selective surfaces are widely used in the microwave and millimeter wave regions of the spectrum for filtering signals. They are used in telecommunication systems for multi-frequency operation or in instrument detectors for spectroscopy. The frequency selective surface operation depends on a periodic array of elements resonating at prescribed wavelengths producing a filter response. The size of the elements is on the order of half the electrical wavelength, and the array period is typically less than a wavelength for efficient operation. When operating in the optical region, diffraction gratings are used for filtering. In this regime the period of the grating may be several wavelengths producing multiple orders of light in reflection or transmission. In regions between these bands (specifically in the infrared band) frequency selective filters consisting of patterned metal layers fabricated using electron beam lithography are beginning to be developed. The operation is completely analogous to surfaces made in the microwave and millimeter wave region except for the choice of materials used and the fabrication process. In addition, the lithography process allows an arbitrary distribution of patterns corresponding to resonances at various wavelengths to be produced. The design of sub-millimeter filters follows the design methods used in the microwave region. Exacting modal matching, integral equation or finite element methods can be used for design. A major difference though is the introduction of material parameters and thicknesses that may not be important in longer wavelength designs. This paper describes the design of multi- bandwidth filters operating in the 1-5 micrometer wavelength range. This work follows on a previous design. In this paper extensions based on further optimization and an examination of the specific shape of the element in the periodic cell will be reported. Results from the design, manufacture and test of linear wedge filters built using microlithographic techniques and used in spectral imaging applications will be presented.

Cwik, Tom↗
NASA NTRS2009

Probabilistic Models for Solar Particle Events

Probabilistic Models of Solar Particle Events (SPEs) are used in space mission design studies to provide a description of the worst-case radiation environment that the mission must be designed to tolerate.The models determine the worst-case environment using a description of the mission and a user-specified confidence level that the provided environment will not be exceeded. This poster will focus on completing the existing suite of models by developing models for peak flux and event-integrated fluence elemental spectra for the Z>2 elements. It will also discuss methods to take into account uncertainties in the data base and the uncertainties resulting from the limited number of solar particle events in the database. These new probabilistic models are based on an extensive survey of SPE measurements of peak and event-integrated elemental differential energy spectra. Attempts are made to fit the measured spectra with eight different published models. The model giving the best fit to each spectrum is chosen and used to represent that spectrum for any energy in the energy range covered by the measurements. The set of all such spectral representations for each element is then used to determine the worst case spectrum as a function of confidence level. The spectral representation that best fits these worst case spectra is found and its dependence on confidence level is parameterized. This procedure creates probabilistic models for the peak and event-integrated spectra.

Adams, James H., Jr.↗
DOE OSTI2026

Absorber Clamp for Microcalorimeter Decay Energy Spectrometry

Microcalorimeter Decay Energy Spectrometry (DES) is of interest to nuclear safeguards due to its ability to provide high precision isotopic compositions of nanogram-to microgram-scale samples of Pu and U and related daughter products. The DES method is able to record decay energy of each alpha-decay event in a sample that is embedded in a metal matrix (absorber) and thermally linked to a microcalorimeter detector. This work optimizes the DES technique used to thermally link the absorber and microcalorimeter detector element to allow for more rapid assembly and to increase detector performance and operating life. Optimized attachment methods are crucial for enhancing the viability of DES in high-sample-throughput facilities, such as those that support international nuclear safeguards measurements. Here, in this study, we designed and implemented a pressure-based absorber clamp and evaluated the performance of this new attachment method relative to pressed indium bond attachment. Results using the absorber clamp demonstrate a streamlined detector assembly procedure that minimizes accidental damage to detectors, as well as increasing detector pulse speeds by 57%. Spectral comparison shows the clamp preserves detector performance relative to indium attachment.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
NASA NTRS1973

Diagnostics of sources of disturbances and distribution of vibrations over the width of a tape in tape-feed mechanisms

Disturbances created by certain assemblies and components of tape-feed mechanisms (TFM) and acting on a moving magnetic tape are studied. The method, based on elements of digital logic, is established by stress-strain diagrams of the longitudinal deformations and vibrations across the width of a magnetic tape. Experimental studies were carried out for determination of the functional relationships of longitudinal deformations in a section of magnetic tape to the magnitude of roller play, tension vibrations rate of movement, and elasticity of magnetic tapes. A block diagram of the measurements is shown. Appropriate digital computer algorithms and programs were proposed for statistical analysis of the data obtained. Estimates of the mathematical expectation, dispersion, intercorrelation function, energy spectral density, and distribution pattern of the random process values were calculated.

Kenstavichyus, A. B. B.↗
DOE OSTI2023

The diversity of aluminum-based drinking water treatment residuals for use in environmental remediation

Drinking water treatment residuals (DWTRs) are complex mixtures of organic and inorganic phases generally disposed of as waste materials. However, their strong sorptive properties could be further exploited to immobilize contaminants. To characterize these materials, we applied a range of analytical techniques to a set of aluminum-based DWTRs. Here we determined surface areas, elemental compositions using CHNS analysis and X-ray fluorescence (XRF), performed thermogravimetric analyses paired with mass spectrometry (TGA-MS), and used synchrotron-based methods: X-ray diffraction (XRD) and X-ray absorption spectroscopy (XAS). Elemental analyses and specific surface area measurements – that vary between 7.23 ± 0.03 and 197.6 ± 0.9 m 2 g –1 – indicate that non-coagulant additives must play an important role in controlling sorption. High resolution powder XRD reveals the presence of only a few crystalline minerals mostly derived from source waters or additives. Fe was detected by XRF in all samples, whereas Mn was present in significant levels in samples with potassium permanganate as additive. The chemical speciation of these elements was characterized by performing spectral decompositions of XAS spectra. The spectral features of Fe are consistent with iron(III) oxides/hydroxides and structural iron in clays. On the other hand, Mn is predominantly present under its reduced form, Mn(II).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2018

Brome isotope selective control of CF{sub 3}Br molecule clustering by IR laser radiation in gas-dynamic expansion of CF{sub 3}Br – Ar mixture

We report the results of research on the experimental control of CF{sub 3}Br molecule clustering under gas-dynamic expansion of the CF{sub 3}Br – Ar mixture at a nozzle exit by using IR laser radiation. A cw CO{sub 2} laser is used for exciting molecules and clusters in the beam and a time-of-flight mass-spectrometer with laser UV ionisation of particles for their detection. The parameters of the gas above the nozzle are determined (compositions and pressure) at which intensive molecule clustering occurs. It is found that in the case of the CF{sub 3}Br gas without carrier when the pressure P{sub 0} above the nozzle does not exceed 4 atm, molecular clusters actually are not generated in the beam. If the gas mixture of CF{sub 3}Br with argon is used at a pressure ratio 1 : N, where N ⩾ 3, and the total pressure above the nozzle is P{sub 0} ⩾ 2 atm, then there occurs molecule clustering. We study the dependences of the efficiency of suppressing the molecule clustering on parameters of the exciting pulse, gas parameters above the nozzle, and on a distance of the molecule irradiation zone from the nozzle exit section. It is shown that in the case of resonant vibrational excitation of gas-dynamically cooled CF{sub 3}Br molecules at the nozzle exit one can realise isotope-selective suppression of molecule clustering with respect to bromine isotopes. With the CF{sub 3}Br – Ar mixtures having the pressure ratio 1 : 3 and 1 : 15, the enrichment factors obtained with respect to bromine isotopes are k{sub enr} ≈ 1.05 ± 0.005 and k{sub enr} ≈ 1.06 ± 0.007, respectively, under jet irradiation by laser emission in the 9R(30) line (1084.635 cm{sup −1}). The results obtained let us assume that this method can be used to control clustering of molecules comprising heavy element isotopes, which have a small isotopic shift in IR absorption spectra. (paper)

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1999

Multi-Bandwidth Frequency Selective Surfaces for Near Infrared Filtering: Design and Optimization

Frequency selective surfaces are widely used in the microwave and millimeter wave regions of the spectrum for filtering signals. They are used in telecommunication systems for multi-frequency operation or in instrument detectors for spectroscopy. The frequency selective surface operation depends on a periodic array of elements resonating at prescribed wavelengths producing a filter response. The size of the elements is on the order of half the electrical wavelength, and the array period is typically less than a wavelength for efficient operation. When operating in the optical region, diffraction gratings are used for filtering. In this regime the period of the grating may be several wavelengths producing multiple orders of light in reflection or transmission. In regions between these bands (specifically in the infrared band) frequency selective filters consisting of patterned metal layers fabricated using electron beam lithography are beginning to be developed. The operation is completely analogous to surfaces made in the microwave and millimeter wave region except for the choice of materials used and the fabrication process. In addition, the lithography process allows an arbitrary distribution of patterns corresponding to resonances at various wavelengths to be produced. The design of sub-millimeter filters follows the design methods used in the microwave region. Exacting modal matching, integral equation or finite element methods can be used for design. A major difference though is the introduction of material parameters and thicknesses tha_ may not be important in longer wavelength designs. This paper describes the design of multi-bandwidth filters operating in the I-5 micrometer wavelength range. This work follows on previous design [1,2]. In this paper extensions based on further optimization and an examination of the specific shape of the element in the periodic cell will be reported. Results from the design, manufacture and test of linear wedge filters built using micro-lithographic techniques and used ir spectral imaging applications will be presented.

Cwik, Tom↗
DOE OSTI2017

Multiscale Methods for Accurate, Efficient, and Scale-Aware Models of the Earth System

The major goal of this project was to contribute improvements to the infrastructure of an Earth System Model in order to support research in the Multiscale Methods for Accurate, Efficient, and Scale-Aware models of the Earth System project. In support of this, the NCAR team accomplished two main tasks: improving input/output performance of the model and improving atmospheric model simulation quality. Improvement of the performance and scalability of data input and diagnostic output within the model required a new infrastructure which can efficiently handle the unstructured grids common in multiscale simulations. This allows for a more computationally efficient model, enabling more years of Earth System simulation. The quality of the model simulations was improved by reducing grid-point noise in the spectral element version of the Community Atmosphere Model (CAM-SE). This was achieved by running the physics of the model using grid-cell data on a finite-volume grid.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2003

Chemical Compositions and Abundance Anomalies in Stellar Coronae ADP 99

Progress has been made using both EUVE (Extreme Ultraviolet Explorer) and ASCA (Advanced Satellite for Cosmology and Astrophysics) data and a new postdoctoral scientist has now been hired. Stars studied to date include YY Gem (dMe binary), xi Boo A (intermediate activity G8 V), xi UMa (more active G quadruple system) HR1099 (K1 IV + G5 V) RS CVn-like, AU Mic (dMe). In addition to a paper that concentrated on abundancies in HR1099, a paper was recently submitted on the coronal abundances of AR(tilde)Lac that revealed an interesting pattern of overabundances of very low FIP elements (Al and Ca) compared to the low FIP elements Si, Mg and Fe. Two papers are nearing completion on methods of analysis and on the abundances in the corona of AU(tilde)Mic. Additionally, two invited conference proceedings papers are being published on this work. The main conclusion of the study to date is that our existing ideas of coronal abundance anomalies need complete revision. The solar-like FIP effect is replaced by a pattern than appears to enhance high FIP elements rather than low FIP elements in very active stars. The archival studies we are undertaking now are revealing some key details of these patterns, and are beginning to map out the anomalies as a function of spectral type, a key goal of this study.

Drake, Jeremy↗
DOE OSTI2018

Surface Plasmon Resonance and Aggregate Stability of Silver Nanoparticle Complexes with Chemotripsin

Extinction spectra, effective sizes, and aggregate stability of silver nanoparticles and nanocomplexes of silver nanoparticles with chymotrypsin obtained by the reactions of chemical reduction of silver nitrate using sodium borohydride as a reducing agent are studied. It is shown that silver nanoparticles obtained in the absence of chymotrypsin are aggregatively stable only at pH values immediately after synthesis. The placement of the synthesized silver nanoparticles in buffer solutions with pH values from 3.0 to 12.0 resulted in the appearance of a wide absorption band in the visible region of the spectrum, which is due to the agglomeration of silver nanoparticles, which appears to be the result of the destruction of the double electric layer formed by the ions making up sodium borohydride. The presence of chymotrypsin in the reaction medium resulted in significant spectral changes. Unlike silver nanoparticles synthesized in the absence of chymotrypsin, for nanocomplexes of silver nanoparticles with chymotrypsin with a change in pH, the shape of the extinction spectra and the position of the surface plasmon resonance band were preserved, while nanocomplexes of silver nanoparticles with chymotrypsin retained the aggregative stability in solutions in the pH range from 3.0 to 12.0 within a month. The observed stabilization effect of silver nanoparticles over a wide pH range induced by the presence of chymotrypsin in the reaction medium can be used further to develop methods for immobilizing enzymes on nanoparticles of biogenic elements and for creating polyfunctional pharmaceuticals, in which the components of nanocomplexes have different biological activity.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2018

On the convergence of Neumann series for electrostatic fracture response

Here, the feasibility of Neumann series expansion of Maxwell’s equations in the electrostatic limit is investigated for potentially rapid and approximate subsurface imaging of geologic features proximal to metallic infrastructure in an oilfield environment. While generally useful for efficient modeling of mild conductivity perturbations in uncluttered settings, we raise the question of its suitability for situations, such as oilfield, where metallic artifacts are pervasive, and in some cases, in direct electrical contact with the conductivity perturbation on which the Neumann series is computed. Convergence of the Neumann series and its residual error are computed using the hierarchical finite element framework for a canonical oilfield model consisting of an “L” shaped, steel-cased well, energized by a steady state electrode, and penetrating a small set of mildly conducting fractures near the heel of the well. For a given node spacing h in the finite element mesh, we find that the Neumann series is ultimately convergent if the conductivity is small enough - a result consistent with previous presumptions on the necessity of small conductivity perturbations. However, we also demonstrate that the spectral radius of the Neumann series operator grows as ~ 1/ h , thus suggesting that in the limit of the continuous problem h → 0, the Neumann series is intrinsically divergent for all conductivity perturbation, regardless of their smallness. The hierarchical finite element methodology itself is critically analyzed and shown to possess the h 2 error convergence of traditional linear finite elements, thereby supporting the conclusion of an inescapably divergent Neumann series for this benchmark example. Application of the Neumann series to oilfield problems with metallic clutter should therefore be done with careful consideration to the coupling between infrastructure and geology. Here, the methods used here are demonstrably useful in such circumstances.

58 GEOSCIENCES↗
NASA NTRS1991

Partitioning of unstructured problems for parallel processing

Many large-scale computational problems are based on unstructured computational domains. Primary examples are unstructured grid calculations based on finite volume methods in computational fluid dynamics, or structural analysis problems based on finite element approximations. The question of how to distribute such unstructured computational domains over a large number of processors in a MIMD machine with distributed memory is addressed. A graph theoretical framework for these problems is established. Based on this framework three decomposition algorithms are introduced. In particular a new decomposition algorithm is discussed, which is based on the computation of an eigenvector of the Laplacian matrix associated with the graph. Numerical comparisons on large-scale two- and three-dimensional problems demonstrate the superiority of the new spectral bisection algorithm.

Simon, H. D.↗
DOE OSTI2017

Analysis of gas jetting and fumarole acoustics at Aso Volcano, Japan

The gas-thrust region of a large volcanic eruption column is predominately a momentum-driven, fluid flow process that perturbs the atmosphere and produces sound akin to noise from jet and rocket engines, termed “jet noise”. In this paper, we aim to enhance understanding of large-scale volcanic jets by studying an accessible, less hazardous fumarolic jet. We characterize the acoustic signature of ~ 2.5-meter wide vigorously jetting fumarole at Aso Volcano, Japan using a 5-element infrasound array located on the nearby crater. The fumarole opened on 13 July 2015 on the southwest flank of the partially collapsed pyroclastic cone within Aso Volcano's Naka-dake crater and had persistent gas jetting, which produced significant audible jet noise. The array was ~ 220 m from the fumarole and 57.6° from the vertical jet axis, a recording angle not typically feasible in volcanic environments. Array processing is performed to distinguish fumarolic jet noise from wind. Highly correlated periods are characterized by sustained, low-amplitude signal with a 7–10 Hz spectral peak. Finite difference time domain method numerical modeling suggests the influence of topography near the vent and along the propagation path significantly affects the spectral content, complicating comparisons with laboratory jet noise. The fumarolic jet has a low estimated Mach number (0.3 to 0.4) and measured temperature of ~ 260 °C. The Strouhal number for infrasound from volcanic jet flows and geysers is not known; thus we assume a peak Strouhal number of 0.19 based on pure-air laboratory jet experiments. This assumption leads to an estimated exit velocity of the fumarole of ~ 79 to 132 m/s. Finally, using published gas composition data from 2003 to 2009, the fumarolic vent area estimated from thermal infrared images, and estimated jet velocity, we estimate total volatile flux at ~ 160–270 kg/s (14,000–23,000 t/d).

58 GEOSCIENCES↗
NASA NTRS2005

Extracting Olivine (Fo-Fa) Compositions from Raman Spectral Peak Positions

Olivine and pyroxene are two major basaltic minerals that have been identified at Gusev Crater and Meridiani Planum by the Mars Exploration Rovers. Full petrologic characterization of a sample (rock or soil), however, requires determining the range of mineral compositions, extent of zoning, range of grain sizes, mineral associations, presence of xenocrysts, etc. Information of this sort will aid the interpretation of sample crystallization and differentiation histories and help discriminate between lithologies. In Raman spectroscopic experiments, minerals are identified by their spectral patterns and mineral compositions can be inferred from the peak positions. Instruments currently in use or slated for impending surface exploration missions provide only average elemental compositions for relatively large rock or soil targets or bulk mineral analysis. No techniques currently in use or scheduled for flight can characterize both structure and composition of individual mineral grains, in-situ, like the Mars Microbeam Raman Spectrometer (MMRS). The MMRS is designed to take 100 spectra along a 1 cm linear traverse on the surface of a sample, with contributions from one or a few mineral phases per spectrum. We presented a method to extract structural and compositional information from the Raman spectra of quadrilateral pyroxenes. The pyroxene calibration was applied to a Raman spectroscopic study of Martian meteorite EETA79001 along with a preliminary olivine calibration, where we demonstrated the capability to discriminate related lithologies using Raman point counts. This paper presents an improved olivine calibration that will further aid sample characterization and the study of alteration processes.

Kuebler, K.↗
DOE OSTI2018

IR Laser Control of the Clustering of CF{sub 3}Br Molecules during the Gas-Dynamic Expansion of a CF{sub 3}Br/Ar Mixture: Bromine Isotope Selectivity

The infrared (IR) laser radiation control of the clustering of CF3Br molecules during the gas-dynamic expansion of a CF{sub 3}Br/Ar mixture at the exit from a nozzle is investigated. Prominence is given to studying the possibility of bromine-isotope-selective suppression of the clustering of CF{sub 3}Br molecules due to their resonance vibrational excitation in the gas-dynamic expansion zone near the nozzle. A continuous CO{sub 2} laser is used in experiments to excite molecules and clusters in a beam, and a quadrupole mass spectrometer is used to detect them. The experimental setup and the experimental technique are described. The dependences of the efficiency of molecule clustering suppression on the exciting laser radiation parameters, the gas parameters (composition, pressure) above the nozzle, and the distance from the nozzle exit section to a molecule irradiation zone are obtained. Bromine-isotope-selective suppression of molecule clustering is shown to occur at the exit from the nozzle due to the resonance vibrational excitation of gas-dynamically cooled CF{sub 3}Br molecules. When CF{sub 3}Br/Ar mixtures are used at pressure ratios p(CF{sub 3}Br): p(Ar) = 1: 10 and 1: 30, the enrichment of a cluster beam by bromine isotopes are K{sub enr}({sup 81}Br) ≈ 1.18 ± 0.09 and 1.12 ± 0.07 during the 9R(30) laser line (1084.635 cm{sup –1}) irradiation of a jet. The clustering suppression selectivity is α ≈ 1.18 when the mixture at the pressure ratio p(CF{sub 3}Br): p(Ar) = 1: 10 is used. These results suggest that the proposed method can selectively control the clustering of the molecules containing the heavy element isotopes that have a small isotope shift in IR absorption spectra (OsO{sub 4}, WF{sub 6}, UF{sub 6}).

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2015

The evolved pulsating CEMP star HD 112869

Radial velocity measurements, BVR{sub C} photometry, and high-resolution spectroscopy in the wavelength region from blue to near-infrared are employed in order to clarify the evolutionary status of the carbon-enhanced metal-poor star HD 112869 with a unique ratio of carbon isotopes in the atmosphere. An LTE abundance analysis was carried out using the method of spectral synthesis and new self-consistent 1D atmospheric models. The radial velocity monitoring confirmed semiregular variations with a peak-to-peak amplitude of about 10 km s{sup −1} and a dominating period of about 115 days. The light, color, and radial velocity variations are typical of the evolved pulsating stars. The atmosphere of HD 112869 appears to be less metal-poor than reported before, [Fe/H] = −2.3 ± 0.2 dex. Carbon-to-oxygen and carbon isotope ratios are found to be extremely high, C/O ≃ 12.6 and{sup 12}C/{sup 13}C ≳ 1500, respectively. The s-process elements yttrium and barium are not enhanced, but neodymium appears to be overabundant. The magnesium abundance seems to be lower than the average found for CEMP stars, [Mg/Fe] < +0.4 dex. HD 112869 could be a single low-mass halo star in the stage of asymptotic giant branch evolution.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2012

INTERPLANETARY PROPAGATION OF SOLAR ENERGETIC PARTICLE HEAVY IONS OBSERVED AT 1 AU AND THE ROLE OF ENERGY SCALING

We have studied {approx}0.3 to >100 MeV nucleon{sup -1} H, He, O, and Fe in 17 large western hemisphere solar energetic particle events (SEP) to examine whether the often observed decrease of Fe/O during the rise phase is due to mixing of separate SEP particle populations, or is an interplanetary transport effect. Our earlier study showed that the decrease in Fe/O nearly disappeared if Fe and O were compared at energies where the two species interplanetary diffusion coefficient were equal, and therefore their kinetic energy nucleon{sup -1} was different by typically a factor {approx}2 ({sup e}nergy scaling{sup )}. Using an interplanetary transport model that includes effects of focusing, convection, adiabatic deceleration, and pitch angle scattering we have fit the particle spectral forms and intensity profiles over a broad range of conditions where the 1 AU intensities were reasonably well connected to the source and not obviously dominated by local shock effects. The transport parameters we derive are similar to earlier studies. Our model follows individual particles with a Monte Carlo calculation, making it possible to determine many properties and effects of the transport. We find that the energy scaling feature is preserved, and that the model is reasonably successful at fitting the magnitude and duration of the Fe/O ratio decrease. This along with successfully fitting the observed decrease of the O/He ratio leads us to conclude that this feature is best understood as a transport effect. Although the effects of transport, in particular adiabatic deceleration, are very significant below a few MeV nucleon{sup -1}, the spectral break observed in these events at 1 AU is only somewhat modified by transport, and so the commonly observed spectral breaks must be present at injection. For scattering mean free paths of the order of 0.1 AU adiabatic deceleration is so large below {approx}200 keV nucleon{sup -1} that ions starting with such energies at injection are cooled sufficiently as to be unobservable at 1 AU. Because of the complicating factors of different spectral break energies for different elements, it appears that SEP abundances determined below the break are least susceptible to systematic distortions.

79 ASTRONOMY AND ASTROPHYSICS↗