SEARCH · Engineering Papers

Results for “solution assembly”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

All sources NASA NTRS DOE OSTI

NASA NTRS1977

The high energy astronomy observatories

The forthcoming NASA project of orbiting High Energy Astronomy Observatories (HEAO's) designed to probe the universe by tracing celestial radiations and particles is outlined. Solutions to engineering problems concerning HEAO's which are integrated, yet built to function independently are discussed, including the onboard digital processor, mirror assembly and the thermal shield. The principle of maximal efficiency with minimal cost and the potential capability of the project to provide explanations to black holes, pulsars and gamma-ray bursts are also stressed. The first satellite is scheduled for launch in April 1977.

Neighbors, A. K.↗

NASA NTRS1981

Design and fabrication of a stringer stiffened discrete-tube actively cooled panel for a hypersonic aircraft

A 0.61 x 1.22 m (2 x 4 ft) test panel was fabricated and delivered to the Langley Research Center for assessment of the thermal and structural features of the optimized panel design. The panel concept incorporated an aluminum alloy surface panel actively cooled by a network of discrete, parallel, redundant, counterflow passage interconnected with appropriate manifolding, and assembled by adhesive bonding. The cooled skin was stiffened with a mechanically fastened conventional substructure of stringers and frames. A 40 water/60 glycol solution was the coolant. Low pressure leak testing, radiography, holography and infrared scanning were applied at various stages of fabrication to assess integrity and uniformity. By nondestructively inspecting selected specimens which were subsequently tested to destruction, it was possible to refine inspection standards as applied to this cooled panel design.

Anthony, F. M.↗

NASA NTRS1984

Rapid solidification via melt spinning - Equipment and techniques

One of the simpler methods available to accomplish rapid solidification processing is free jet melt spinning. With only a modest expenditure of time, effort, and capital, an apparatus suitable for preliminary experimentation can be assembled. Wheel and crucible materials, process atmospheres, crucible design, heating methods, and process parameters and their relationship to melt composition are described. Practical solutions to processing problems, based on 'hands-on' experience, are offered. Alloys with melting points up to 3000 F have been rapidly solidified using the techniques described.

Jech, R. W.↗

NASA NTRS1994

Surface matching for correlation of virtual models: Theory and application

Virtual reality can enable a robot user to off line generate and test in a virtual environment a sequence of operations to be executed by the robot in an assembly cell. Virtual models of objects are to be correlated to the real entities they represent by means of a suitable transformation. A solution to the correlation problem, which is basically a problem of 3-dimensional adjusting, has been found exploiting the surface matching theory. An iterative algorithm has been developed, which matches the geometric surface representing the shape of the virtual model of an object, with a set of points measured on the surface in the real world. A peculiar feature of the algorithm is to work also if there is no one-to-one correspondence between the measured points and those representing the surface model. Furthermore the problem of avoiding convergence to local minima is solved, by defining a starting point of states ensuring convergence to the global minimum. The developed algorithm has been tested by simulation. Finally, this paper proposes a specific application, i.e., correlating a robot cell, equipped for biomedical use with its virtual representation.

Caracciolo, Roberto↗

NASA NTRS2004

Simulation Based Acquisition for NASA's Office of Exploration Systems

In January 2004, President George W. Bush unveiled his vision for NASA to advance U.S. scientific, security, and economic interests through a robust space exploration program. This vision includes the goal to extend human presence across the solar system, starting with a human return to the Moon no later than 2020, in preparation for human exploration of Mars and other destinations. In response to this vision, NASA has created the Office of Exploration Systems (OExS) to develop the innovative technologies, knowledge, and infrastructures to explore and support decisions about human exploration destinations, including the development of a new Crew Exploration Vehicle (CEV). Within the OExS organization, NASA is implementing Simulation Based Acquisition (SBA), a robust Modeling & Simulation (M&S) environment integrated across all acquisition phases and programs/teams, to make the realization of the President s vision more certain. Executed properly, SBA will foster better informed, timelier, and more defensible decisions throughout the acquisition life cycle. By doing so, SBA will improve the quality of NASA systems and speed their development, at less cost and risk than would otherwise be the case. SBA is a comprehensive, Enterprise-wide endeavor that necessitates an evolved culture, a revised spiral acquisition process, and an infrastructure of advanced Information Technology (IT) capabilities. SBA encompasses all project phases (from requirements analysis and concept formulation through design, manufacture, training, and operations), professional disciplines, and activities that can benefit from employing SBA capabilities. SBA capabilities include: developing and assessing system concepts and designs; planning manufacturing, assembly, transport, and launch; training crews, maintainers, launch personnel, and controllers; planning and monitoring missions; responding to emergencies by evaluating effects and exploring solutions; and communicating across the OExS enterprise, within the Government, and with the general public. The SBA process features empowered collaborative teams (including industry partners) to integrate requirements, acquisition, training, operations, and sustainment. The SBA process also utilizes an increased reliance on and investment in M&S to reduce design risk. SBA originated as a joint Industry and Department of Defense (DoD) initiative to define and integrate an acquisition process that employs robust, collaborative use of M&S technology across acquisition phases and programs. The SBA process was successfully implemented in the Air Force s Joint Strike Fighter (JSF) Program.

Hale, Joe↗

NASA NTRS2010

Highly Conductive Multifunctional Graphene Polycarbonate Nanocomposites

Graphene nanosheet bisphenol A polycarbonate nanocomposites (0.027 2.2 vol %) prepared by both emulsion mixing and solution blending methods, followed by compression molding at 287 C, exhibited dc electrical percolation threshold of approx.0.14 and approx.0.38 vol %, respectively. The conductivities of 2.2 vol % graphene nanocomposites were 0.512 and 0.226 S/cm for emulsion and solution mixing. The 1.1 and 2.2 vol % graphene nanocomposites exhibited frequency-independent behavior. Inherent conductivity, extremely high aspect ratio, and nanostructure directed assembly of the graphene using PC nanospheres are the main factors for excellent electrical properties of the nanocomposites. Dynamic tensile moduli of nanocomposites increased with increasing graphene in the nanocomposite. The glass transition temperatures were decreased with increasing graphene for the emulsion series. High-resolution electron microscopy (HR-TEM) and small-angle neutron scattering (SANS) showed isolated graphene with no connectivity path for insulating nanocomposites and connected nanoparticles for the conductive nanocomposites. A stacked disk model was used to obtain the average particle radius, average number of graphene layers per stack, and stack spacing by simulation of the experimental SANS data. Morphology studies indicated the presence of well-dispersed graphene and small graphene stacking with infusion of polycarbonate within the stacks.

Yoonessi, Mitra↗

NASA NTRSDate not supplied

Plasma Activated Water Developments for Lunar and Martian Applications

Plasma activated water (PAW) would be of great use for space applications, due to the myriad of on-demand uses. Some of these applications were directly explored at NASA’s Kennedy Space Center including: Space crop production, Martian systems, and acid-base production. The presence of any nitrogen in the gas stream, including in a simulated Martian atmospheric composition, allows for nitrates to form in water during plasma treatment. These nitrates form nitric acid and drive down the pH while also being in a readily useable form by plants. Inedible biomass ash, which can be created using the same plasma system that treats the water, can be added into the acidic PAW to raise the pH. Measured pH values ranged from 2.7 to 11.5 using this process. Both the nitrates and the nutrients from the inedible biomass are beneficial for the plants, and the pH control allows for use with many different plant species. This methodology is also enabling for space-based hydroponic systems. At KSC, growth studies of Cherry Belle radishes showed comparable dry masses of edible biomass grown with Hoagland’s nutrient solution (a best-case scenario solution that is impractical for launch transportation) and the edible biomass grown with plasma water with the added ash. Both solutions showed substantial improvements over the deionized water that is most similar to what is available in Space systems via the water processor assembly. Additionally, the ability to produce both acidic PAW and basic PAW has benefits for sanitation as well. Preliminary studies showed a 5.8 log reduction of P. Aeruginosa when exposed to PAW mixtures, which shows the ability to remove this common biofilm.

Ryan Patrick Gott↗

NASA NTRSDate not supplied

Plasma Activated Water Developments for Lunar and Martian Applications

Plasma activated water (PAW) could be of great use for space applications, due to the myriad of on-demand uses. The presence of any nitrogen in the gas stream, including in a simulated Martian atmospheric composition, allows for nitrates to form in water during plasma treatment. These nitrates form nitric acid and drive down the pH while also being in a readily useable form by plants. By varying the reactions and mixing in natural additives, pH values from 2.7 to 11.5 were achieved. The pH control allows for use with many different plant species. This methodology is also enabling for space-based hydroponic systems. Growth studies of Cherry Belle radishes showed comparable dry masses of edible biomass grown with Hoagland’s nutrient solution (a best-case scenario solution that is impractical for launch transportation) and the edible biomass grown with PAW. Both solutions showed substantial improvements over the deionized water that is most similar to what is available in Space systems via the water processor assembly. Additionally, the ability to produce both acidic PAW and basic PAW has benefits for sanitation as well. Preliminary studies showed a 5.8 log reduction of P. Aeruginosa when exposed to PAW mixtures, which shows the ability to remove this common biofilm.

Ryan Gott↗

DOE OSTI2022

Thermodynamic Model and Initial Experimental Investigation of Air Dehumidification through Electrically Charged Vapor Capturing Electrostatic Droplets

The removal of water vapor from the air to reduce relative humidity is a well known indoor environmental comfort requirement. Common dehumidification approaches require a substantial amount of energy and usually involve the cooling of atmospheric humid air below its dew point or the use of absorbent/adsorbent materials to extract water vapor out of the air. More recently, researchers investigated the effect of electrostatic forces for enhancing water vapor condensation with the goal to reduce the energy consumption associated with dehumidification. However, the studies are limited, and there is a lack of correlations that can predict the dehumidification rate. In this thesis, a broad theoretical investigation to study the electrostatically enhanced condensation processes was carried out. These processes consist of the use of highly charged particles, preferably highly charged water droplets to attract polar water vapor molecules to their surfaces and promote condensation, a phenomenon known as dielectrophoresis. The electrical charge promotes the reduction of the vapor pressure on the droplets' surface with respect to the saturated pressure predicted by the Kelvin equation on curved surfaces and, consequently, the equilibrium between evaporation and condensation is shifted towards condensation. This investigation resulted in the development of a thermodynamics model, which was able to predict an effective size range of the charged droplets for optimal dehumidification, under ideal conditions. The range resulted in about 2 to 4 m in diameter, while the electrical charge was kept to the maximum limit predicted by the Rayleigh model. A sensitivity analysis on the variation of the size and the charge of the charged droplets was also performed. In terms of dehumidification rates, when six electrospray heads, i.e. the maximum number of heads tested in the experimental campaign, were considered, the model predicted very limited rates, way lower than the target of this research, i.e. a dehumidification rate in terms of relative humidity of 5 % with an air flow rate of 5 cfm. While ways to increase this rate existed, their implementation proved difficult for this initial investigation. According to the requirements predicted by the model, the use of electrosprays appeared the most suitable solution for the production of small but highly charged droplets. The electrospray features and operational modes were studied in detail and an electrospray assembly was designed to be tested in this initial experimental investigation. For this initial investigation, an experimental system was designed and built to validate the thermodynamics model and with the goal to achieve a dehumidification rate of 5 % in terms of relative humidity with an air flow rate of 5 cfm. The experimental system consisted of a wind tunnel test apparatus, dew point sensors, thermocouples for temperature measurements, pressure sensors and other devices. The experimental system was equipped with a computerized data acquisition and storage system. The system was suitable to evaluate the air water content differential before and after the test section where the electrospray heads were installed. The air water content differential was evaluated in terms of the ∆ω/ω_1 ratio, to eliminate the dependence on the dry bulb temperature along the test apparatus. This work presented initial experimental data for electrostatically enhanced dehumidification processes. Working parameters, such as air and water flow rates, high voltage potentials and polarity, deionized water types with different electrical conductivity, were varied to find the best combination for an improved dehumidification. With the set up used and the conditions considered, it was never possible to achieve a 5 % dehumidification rate with 5 cfm. In general, the dehumidification rate was always limited and lower than 1 % for all the air flow rates considered and mainly within the uncertainty of the dew point sensors. These results confirmed the already limited predictions of the thermodynamics model, for ideal conditions and the interesting and promising results obtained in some experimental investigations available in the open literature were not achievable in this thesis. The more probable reasons were the higher air flow rates considered and the complete absence of the use of cooling power, which was mainly implemented to facilitate the vapor condensation.

Morcelli, Stefano↗

DOE OSTI2025

Gramicidin and chlorhexidine encapsulated in bicontinuous microemulsions: Antimicrobial activity performance and their impact on self‐assembly

The utility of bicontinuous microemulsions (BMEs) as carriers of the antimicrobial peptide (AMP) gramicidin D and antiseptic chlorhexidine was investigated for possible topical delivery to chronic wounds. The two water-insoluble solutes dissolved in pre-formed one-phase BMEs of Water/Polysorbate 80/Limonene/Ethanol/Glycerol and Water/Aerosol-OT (AOT)/Polysorbate 85/Isopropyl Myristate and an AOT/Polysorbate 85 Winsor-III system, achieving gramicidin and chlorhexidine concentrations of 1.0 wt% and 0.5% individually and 0.5% and 0.3% in mixtures at 22°C, respectively. Small-angle neutron scattering measurements demonstrated that both solutes decreased surfactant interfacial activity and increased interfacial fluidity for the Polysorbate 80 system. For the AOT/Polysorbate 85 systems, ellipsoidal aggregates consisting of gramicidin and likely adsorbed surfactant and oil formed, while chlorhexidine enhanced the surface activity of surfactants. According to bioassays performed on artificial skin, the incorporation of melittin, gramicidin, and chlorhexidine in general enhanced the bioactivity of Polysorbate 80 BMEs for 24 h treatment against relevant antibiotic-resistant bacteria found on skin relative to controls. Yet, BME treatments were less effective than aqueous melittin control, in contrast to well diffusion bioassays performed previously. The results reflect the strong impact of AMPs and antiseptics on BME structure and dynamics and the complexity of formulating BMEs for optimal antimicrobial activity.

antimicrobial peptides↗

DOE OSTI2022

POLCA8 - modelling of cross section variations inside hexagonal assemblies

This paper presents the POLCA8 approach for modelling non-constant cross section distributions inside hexagonal fuel assemblies. The multigroup diffusion equation is modified to account for intranodal cross section variations. The obtained equation is solved in a node-wise manner based on the Fourier expansion method. As a result of varying cross sections, the solution includes a particular part additionally to the homogeneous one. A method for obtaining the particular solution is derived. Numerical tests on a VVER-1000 core are presented showing the impact of cross-section variations to some key parameters for reactor operation. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

NASA NTRS1980

Grid and metric generation on the assembly of locally bi-quadratic coordinate transformations

The generation of metric coefficients of the coordinate transformation from a generally curved-sided domain boundary to the unit square (cube) is required for efficient solution algorithms in computational fluid mechanics. An algebraic procedure is presented for establishment of these data on the union of arbitrarily selected sub-domains of the global solution domain. A uniformly smooth progression of grid refinement is readily generated, including multiple specification of refined grids for a given macro-element domain discretization. The procedure is illustrated as generally applicable to non-simply connected domains in two and three dimensions.

Baker, A. J.↗

DOE OSTI2022

Development, verification, and validation of comprehensive acoustic fluid-structure interaction capabilities in an open-source computational platform

The acoustic fluid-structure interaction (FSI) formulation is a practical numerical approach for the seismic analysis of fluid-filled tanks. However, there are no verification and validation studies reported in the literature that demonstrate the ability of an acoustic FSI numerical model to predict responses important to structural and mechanical design for intense translational and rotational earthquake inputs. Herein, an acoustic FSI formulation is implemented in the open-source Multiphysics Object-Oriented Simulation Environment (MOOSE), and is formally verified and validated using analytical solutions and code-to-code verification, and experimental data, respectively. The analytical solutions are for small amplitude, unidirectional seismic inputs. The code-to-code verification utilizes a previously verified and validated Arbitrary Lagrangian-Eulerian (ALE) numerical model in the commercial finite element code LS-DYNA. The validation studies utilize a comprehensive data set assembled from results of 3D earthquake-simulator tests of a fluid-filled vessel. The acoustic numerical model in MOOSE is verified and validated for hydrodynamic pressures and support reactions except for cases that involve significant convective response. For small amplitude inputs, numerically predicted wave heights match those of the analytical solutions. The numerical model is not verified and validated for wave height calculations under intense 3D seismic inputs. The run times for the acoustic FSI simulations in MOOSE are an order of magnitude, or more, shorter than for the corresponding ALE simulations in LS-DYNA. The utility of the MOOSE acoustic FSI implementation is demonstrated by seismic analysis of a building equipped with a fluid-filled, advanced nuclear reactor.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2021

Self-Assembled Thermoresponsive Molecular Brushes as Nanoreactors for Asymmetric Aldol Addition in Water

The manipulation and tunability of self-assembled block copolymers through external stimuli presents an attractive strategy to develop smart polymer-based nanoreactors as supports for non-orthogonal tandem catalysis. We report on thermoresponsive core-shell micelles based on poly[norbornene-poly(2-methyl-2-oxazoline-block-2-propyl-2-oxazoline)]-graft-poly[norbornene L-proline] (P[NB-P(MeOx-b-PropOx)]-graft-P[NB-L-proline]) as catalyst supports for L-proline. These molecular brushes exhibit large differences in lower critical solution temperature behavior and nanostructure size in water depending on the chain-lengths and proline connectivity. L-Proline-mediated aldol reactions expose the efficiency by which the molecular brushes self-assemble into micelles. Molecular brushes with an extended backbone show higher activity and selectivity, suggesting better core-shell segregation of the micelles and exclusion of water from the catalytic site. Catalytic efficiencies are not improved above the cloud point temperature, the catalytic be-havior is rather sensitive to conformational changes of the polymer chains.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NASA NTRS2013

Intravenous Fluid Generation System

The ability to stabilize and treat patients on exploration missions will depend on access to needed consumables. Intravenous (IV) fluids have been identified as required consumables. A review of the Space Medicine Exploration Medical Condition List (SMEMCL) lists over 400 medical conditions that could present and require treatment during ISS missions. The Intravenous Fluid Generation System (IVGEN) technology provides the scalable capability to generate IV fluids from indigenous water supplies. It meets USP (U.S. Pharmacopeia) standards. This capability was performed using potable water from the ISS; water from more extreme environments would need preconditioning. The key advantage is the ability to filter mass and volume, providing the equivalent amount of IV fluid: this is critical for remote operations or resource- poor environments. The IVGEN technology purifies drinking water, mixes it with salt, and transfers it to a suitable bag to deliver a sterile normal saline solution. Operational constraints such as mass limitations and lack of refrigeration may limit the type and volume of such fluids that can be carried onboard the spacecraft. In addition, most medical fluids have a shelf life that is shorter than some mission durations. Consequently, the objective of the IVGEN experiment was to develop, design, and validate the necessary methodology to purify spacecraft potable water into a normal saline solution, thus reducing the amount of IV fluids that are included in the launch manifest. As currently conceived, an IVGEN system for a space exploration mission would consist of an accumulator, a purifier, a mixing assembly, a salt bag, and a sterile bag. The accumulator is used to transfer a measured amount of drinking water from the spacecraft to the purifier. The purifier uses filters to separate any air bubbles that may have gotten trapped during the drinking water transfer from flowing through a high-quality deionizing cartridge that removes the impurities in the water before entering the salt bag and mixing with the salt to create a normal saline solution.

McQuillen, John↗

DOE OSTI2024

Exciton Transfer Between Extended Electronic States in Conjugated Inter-Polyelectrolyte Complexes

Artificial light harvesting, a process that involves converting sunlight into chemical potential energy, is considered to be a promising part of the overall solution to address urgent global energy challenges. Conjugated polyelectrolyte complexes (CPECs) are particularly attractive for this purpose due to their extended electronic states, tunable assembly thermodynamics, and sensitivity to their local environment. Importantly, ionically assembled complexes of conjugated polyelectrolytes can act as efficient donor-acceptor pairs for electronic energy transfer (EET). However, to be of use in material applications, we must understand how modifying the chemical structure of the CPE backbone alters the EET rate beyond spectral overlap considerations. In this report we investigate the dependence of the EET efficiency and rate on the electronic structure and excitonic wave function of the CPE backbone. To do so, we synthesized a series of alternating copolymers where the electronic states are systematically altered by introducing comonomers with electron withdrawing and electron-rich character while keeping the linear ionic charge density nearly fixed. We find evidence that the excitonic coupling may be significantly affected by the exciton delocalization radius, in accordance with analytical models based on the line-dipole approximation and quantum chemistry calculations. Our results imply that care should be taken when selecting CPE components for optimal CPEC EET. These results have implications for using CPECs as key components in water-based light-harvesting materials, either as standalone assemblies or as adsorbates on nanoparticles and thin films.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Wall Upgrades for Energy Retrofits: A Techno-Economic Study

Homes built before 1992, when the U.S. Department of Energy’s (DOE) Building Energy Codes Program was established, represent approximately 68% of the residential building stock in the country. Up to 43% of these homes have little to no insulation in the walls and have very high air leakage rates of 10 or more air changes per hour at 50 pascals of pressure (ACH50). These issues can represent a substantial portion of unnecessary money spent on utility bills for homeowners, especially in the colder climates. There is a significant need for cost-effective, reliable retrofit methods for these homes that include air, moisture, and vapor controls which are considered best practices for high-performance new home construction. Well-tested and documented wall retrofit systems can help to achieve substantial energy savings and also improve durability, comfort, health, and resilience. In 2018, DOE’s Building Technologies Office awarded Pacific Northwest National Laboratory, Oak Ridge National Laboratory, and the University of Minnesota funding to complete a 3-year project to compare a range of residential wall retrofit systems that prioritized affordability, durability and energy savings potential. In addition to these core criteria, the ease-of-construction and the wide-scale applicability of the solutions also were considered. In this project, the research team identified, constructed, tested, simulated, and analyzed the feasibility and economics of 16 wall retrofit assemblies (14 test configurations and two baseline configurations).

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2021

Evaluation of Electrodialysis Desalination Performance of Novel Bioinspired and Conventional Ion Exchange Membranes with Sodium Chloride Feed Solutions

Electrodialysis (ED) desalination performance of different conventional and laboratory-scale ion exchange membranes (IEMs) has been evaluated by many researchers, but most of these studies used their own sets of experimental parameters such as feed solution compositions and concentrations, superficial velocities of the process streams (diluate, concentrate, and electrode rinse), applied electrical voltages, and types of IEMs. Thus, direct comparison of ED desalination performance of different IEMs is virtually impossible. While the use of different conventional IEMs in ED has been reported, the use of bioinspired ion exchange membrane has not been reported yet. The goal of this study was to evaluate the ED desalination performance differences between novel laboratory‑scale bioinspired IEM and conventional IEMs by determining (i) limiting current density, (ii) current density, (iii) current efficiency, (iv) salinity reduction in diluate stream, (v) normalized specific energy consumption, and (vi) water flux by osmosis as a function of (a) initial concentration of NaCl feed solution (diluate and concentrate streams), (b) superficial velocity of feed solution, and (c) applied stack voltage per cell-pair of membranes. A laboratory‑scale single stage batch-recycle electrodialysis experimental apparatus was assembled with five cell‑pairs of IEMs with an active cross-sectional area of 7.84 cm2. In this study, seven combinations of IEMs (commercial and laboratory-made) were compared: (i) Neosepta AMX/CMX, (ii) PCA PCSA/PCSK, (iii) Fujifilm Type 1 AEM/CEM, (iv) SUEZ AR204SZRA/CR67HMR, (v) Ralex AMH-PES/CMH-PES, (vi) Neosepta AMX/Bare Polycarbonate membrane (Polycarb), and (vii) Neosepta AMX/Sandia novel bioinspired cation exchange membrane (SandiaCEM). ED desalination performance with the Sandia novel bioinspired cation exchange membrane (SandiaCEM) was found to be competitive with commercial Neosepta CMX cation exchange membrane.

42 ENGINEERING↗