Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solid oxide”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Summary Report on Solid-oxide Electrolysis Cell Testing and Development

Idaho National Laboratory (INL) has been researching the application of solid-oxide electrolysis cells (SOECs) for large-scale hydrogen production from steam over a temperature range of 800 to 900°C. From 2003 to 2009, this work was sponsored by the United States Department of Energy Nuclear Hydrogen Initiative, under the Office of Nuclear Energy. Starting in 2010, the high-temperature electrolysis (HTE) research program has been sponsored by the INL Next Generation Nuclear Plant Project. This report provides a summaryof program activities performed in Fiscal Year (FY) 2011 and the first quarter of FY-12, with a focus on small-scale testing and cell development activities. HTE research priorities during this period have included the development and testing of SOEC and stack designs that exhibit high-efficiency initial performance and low, long-term degradation rates. This report includes contributions from INL and five industry partners: Materials and Systems Research, Incorporated (MSRI); Versa Power Systems, Incorporated (VPS); Ceramatec, Incorporated; National Aeronautics and Space Administration - Glenn Research Center (NASA - GRC); and the St. Gobain Advanced Materials Division. These industry partners have developed SOEC cells and stacks for in-house testing in the electrolysis mode and independent testing at INL. Additional fundamental research and post-test physical examinations have been performed at two university partners: Massachusetts Institute of Technology (MIT) and the University of Connecticut. Summaries of these activities and test results are also presented in this report.

08 HYDROGEN↗

Doped Solid Oxide Fuel Cell Electrolytes Produced via Combination of Suspension Plasma Spray and Very Low Pressure Plasma Spray

Solid oxide fuel cells (SOFCs) are a promising element of comprehensive energy portfolio due to their direct mechanism for converting the oxidization of fuel, such as hydrogen, into electrical energy. Plasma spray allows deposition of high melting temperature SOFC feedstock on complex surfaces, such as in non-planar SOFC designs. Dense, thin electrolytes of ideal composition for SOFCs can be created by suspension plasma spraying in a very low pressure environment. Compositional control is achieved with dissolved dopant compounds that are incorporated into the coating during spraying. In the work reported, sub-micron 8 mole% Y 2 O 3 -ZrO 2 (YSZ) powders, in suspension with scandium-nitrate dopants, were sprayed on NiO-YSZ anodes, at Sandia National Laboratories’ Thermal Spray Research Laboratory. The spray chamber was held at 2.4-10 Torr, with the plasma composed of argon, hydrogen, and helium. The resultant electrolytes were 2-10 microns thick. Electrolyte microstructure and performance as part of a SOFC system is reported.

30 DIRECT ENERGY CONVERSION↗

Highly-Active and Contaminant-Tolerant Cathodes for Durable Solid Oxide Fuel Cells

The objective of this project is to investigate the fundamental degradation methods occurring in solid oxide fuel cell (SOFC) cathodes when exposed to chromium and carbon dioxide contamination and to rationally design alkaline earth-based catalysts to increase stability and tolerance to contaminate poisoning. With a mechanistic and fundamental understanding of the degradation methods, advanced catalytic surface modifications can be applied to reduce degradation. The specific technical objectives are: (1) To identify/develop new catalysts (alkaline-earth based-) that are compatible chemically with the state-of-the-art cathode materials at high temperatures required for fabrication and with contaminates commonly encountered under operating conditions; (2) To improve the infiltration process for optimal control of the thickness, composition, and uniformity of the catalyst coatings; (3) To evaluate the electro-catalytic activity toward ORR of the chemically-stable materials when exposed to different types of contaminants using electrical conductivity relaxation measurements on bar samples and performance evaluation of catalyst-infiltrated cathodes; (4) To unravel the contamination-tolerant mechanisms of the new catalyst coatings under realistic environmental conditions (with different types of contaminants) using powerful in situ and in operando characterization techniques performed on model cells with thin-film/pattern electrodes, as guided by modeling and simulation; (5) To establish scientific basis for rational design of new catalysts of high tolerance to contaminants; (6) To validate the long term stability of modified LSCF cathodes in commercially available cells/stacks under ROC. Alkaline earth-based catalysts have been systematically explored and tested under various contamination conditions. BaCoO 3-δ (BCO) was shown to produce the best catalytic activity enhancement as well as stability in a variety of contaminating conditions, including CO 2 and chromium. The microstructural evolution was investigated with SEM, EDS, and Raman spectroscopy, showing the BCO catalyst prevents the formation of insulating SrCrO 4 by forming electrically conductive BaCrO 4 . Electrochemical relaxation measurements determined the BCO catalyst coatings increased the surface diffusion coefficient but did not significantly affect the diffusion coefficient and determined an optimum surface modification layer of 100 nm. A novel Ba 0.9 Co 0.7 Fe 0.2 Nb 0.1 O x (BCFN) catalyst was also shown to have excellent stability in chromium containing atmospheres. A novel surface sol-gel (SSG) surface modification, which offers superior thickness and compositional control, was applied to SOFCs to produce BaO catalyst coatings. SSG BaO coatings were shown to produce conformal coatings on the electrode surface, greatly4 increasing stability in chromium containing atmospheres. An atomic level mechanistic approach was applied to investigate the stability of PrBa 0.8 Ca 0.2 Co 2 O 5+δ (PBCC) with respect to a variety of common contaminants, demonstrating thermodynamically its superior stability in CO 2 containing atmospheres. Finally, the best catalyst coatings demonstrated in this project, BCO and PBCC, were applied to full cells which demonstrated superior stability for over 300 hours in CO 2 and Cr atmospheres.

30 DIRECT ENERGY CONVERSION↗

Highly-Active and Contaminant-Tolerant Cathodes for Durable Solid Oxide Fuel Cells

The objective of this project is to investigate the fundamental degradation methods occurring in solid oxide fuel cell (SOFC) cathodes when exposed to chromium and carbon dioxide contamination and to rationally design alkaline earth-based catalysts to increase stability and tolerance to contaminate poisoning. With a mechanistic and fundamental understanding of the degradation methods, advanced catalytic surface modifications can be applied to reduce degradation. The specific technical objectives are: (1) To identify/develop new catalysts (alkaline-earth based-) that are compatible chemically with the state-of-the-art cathode materials at high temperatures required for fabrication and with contaminates commonly encountered under operating conditions; (2) To improve the infiltration process for optimal control of the thickness, composition, and uniformity of the catalyst coatings; (3) To evaluate the electro-catalytic activity toward ORR of the chemically-stable materials when exposed to different types of contaminants using electrical conductivity relaxation measurements on bar samples and performance evaluation of catalyst-infiltrated cathodes; (4) To unravel the contamination-tolerant mechanisms of the new catalyst coatings under realistic environmental conditions (with different types of contaminants) using powerful in situ and in operando characterization techniques performed on model cells with thin-film/pattern electrodes, as guided by modeling and simulation; (5) To establish scientific basis for rational design of new catalysts of high tolerance to contaminants; (6) To validate the long term stability of modified LSCF cathodes in commercially available cells/stacks under ROC. Alkaline earth-based catalysts have been systematically explored and tested under various contamination conditions. BaCoO 3-δ (BCO) was shown to produce the best catalytic activity enhancement as well as stability in a variety of contaminating conditions, including CO 2 and chromium. The microstructural evolution was investigated with SEM, EDS, and Raman spectroscopy, showing the BCO catalyst prevents the formation of insulating SrCrO 4 by forming electrically conductive BaCrO 4 . Electrochemical relaxation measurements determined the BCO catalyst coatings increased the surface diffusion coefficient but did not significantly affect the diffusion coefficient and determined an optimum surface modification layer of 100 nm. A novel Ba 0.9 Co 0.7 Fe 0.2 Nb 0.1 O x (BCFN) catalyst was also shown to have excellent stability in chromium containing atmospheres. A novel surface sol-gel (SSG) surface modification, which offers superior thickness and compositional control, was applied to SOFCs to produce BaO catalyst coatings. SSG BaO coatings were shown to produce conformal coatings on the electrode surface, greatly 4 increasing stability in chromium containing atmospheres. An atomic level mechanistic approach was applied to investigate the stability of PrBa 0.8 Ca 0.2 Co 2 O 5+δ (PBCC) with respect to a variety of common contaminants, demonstrating thermodynamically its superior stability in CO 2 containing atmospheres. Finally, the best catalyst coatings demonstrated in this project, BCO and PBCC, were applied to full cells which demonstrated superior stability for over 300 hours in CO 2 and Cr atmospheres

01 COAL, LIGNITE, AND PEAT↗

Characterization and Accelerated Life Testing of a New Solid Oxide Electrolysis Cell

The project aims to develop mechanistic degradation models that realistically predict long-term Solid Oxide Electrolysis Cell (SOEC) durability, using input data from accelerated electrochemical life testing combined with quantitative microstructural and microchemical evaluation. A promising SOEC type will be further developed. The understanding achieved by combining experimental results and theory will be used to guide improvements in long-term SOEC durability, and validate that this technology can reach DOE H 2 production cost and durability targets. Planned outcomes include: (1) new experimental accelerated testing data on SOEC degradation at the oxygen electrode, fuel electrode, and electrolyte; (2) predictive theory of degradation developed based on the accelerated test data; (3) new electrode materials and processing methods that minimize degradation rate; (4) determination of the impact of SOEC electrolyte thickness and electrode composition/microstructure on performance and degradation; (5) determination of the operating conditions where degradation is minimized; and (6) validation of degradation models for extrapolating accelerated test data to predict long-term durability.

08 HYDROGEN↗

Ni modified ceramic anodes for direct-methane solid oxide fuel cells

In accordance with certain embodiments of the present disclosure, a method for fabricating a solid oxide fuel cell is described. The method includes synthesizing a composition having a perovskite present therein. The method further includes applying the composition on an electrolyte support to form an anode and applying Ni to the composition on the anode.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

On the nonlinear temperature dependence of residual stresses in solid oxide fuel cells

The residual stresses in a dense yttria-stabilized zirconia (YSZ) layer bonded to a porous NiO-YSZ substrate were measured by X-ray diffraction in air between 25°C and 900°C. In this work, it was found that the residual stresses on the outer surface of the YSZ layer were compressive, that their magnitude increased with decreasing temperature, and that the temperature dependence was nonlinear particularly at temperatures below 600°C. An elastic model that incorporates micromechanics and laminate theory was formulated to successfully predicts the nonlinearity of the temperature dependence of the residual stresses by accounting for the effect of the order-disorder transition experienced by YSZ around 600°C and the magnetic transition of NiO at the Néel temperature around 265°C, on the properties of these materials. The implications of the results for the reliability of solid oxide fuel cells are discussed.

25 ENERGY STORAGE↗

Operando study of ceria-based solid oxide electrochemical cells

Many physical and chemical properties of ceria can be attributed to the tolerance of the fluorite structure to a high concentration of oxygen ion vacancies, which allows ceria to change oxidation states over a wide temperature range at low P O2 . Notably, on ceria surface, oxygen vacancies can rapidly formed and re-oxidized, giving ceria an enhanced ability to release and store oxygen and to split H 2 O in catalytic reactors. In the bulk, oxygen vacancies are the predominant charge carriers, which makes ceria one of the most important oxygen ion conducting solid electrolytes in solid oxide fuel cells (SOFCs). Therefore, the abilities to monitor the oxygen vacancy number at the surface and in bulk at a given pressure, temperature, and gas environment are important and highly desirable to explore and create new ceria based materials and devices.

25 ENERGY STORAGE↗

Interactions of nickel/zirconia solid oxide fuel cell anodes with coal gas containing arsenic

The performance of anode-supported and electrolyte-supported solid oxide fuel cells was investigated in synthetic coal gas containing 0 to 10 ppm arsenic introduced as arsine. Arsenic was found to interact strongly with nickel in the anode, resulting in the formation of nickel-arsenic solid solution, Ni5As2 and Ni11As8, depending on temperature, arsenic concentration, and reaction time. For anode-supported cells, loss of electrical connectivity in the anode support was the principal mode of degradation, as nickel was converted to nickel arsenide phases that migrated to the surface to form large grains. Cell failure occurred well before the entire anode was converted to nickel arsenide, and followed a reciprocal square root of arsenic partial pressure dependence consistent with a diffusion-based rate-limiting step. Failure occurred more quickly with electrolyte-supported cells, which have a substantially smaller nickel inventory. For these cells, time to failure varied linearly with the reciprocal arsenic concentration in coal gas, and occurred when arsenic reached the anode/electrolyte interface. Test performed with nickel/zirconia coupons showed that arsenic was essentially completely captured in a narrow band near the fuel gas inlet.

Environmental Molecular Sciences Laboratory↗

Binary, ternary and quaternary silicates of CaO, BaO and ZnO in high thermal expansion seals for solid oxide fuel cells studied by high-temperature X-ray diffraction (HT-XRD)

Highlights: Black-Right-Pointing-Pointer We examined the thermal expansion of various silicates of CaO, BaO and ZnO. Black-Right-Pointing-Pointer Thermal expansions were determined by dilatometry and high-temperature X-ray diffraction. Black-Right-Pointing-Pointer High-temperature X-ray diffraction enabled to determine anisotropic thermal expansion. Black-Right-Pointing-Pointer CaSiO{sub 3}, Ca{sub 3}Si{sub 2}O{sub 7} and BaCa{sub 2}Si{sub 3}O{sub 9} exhibit the highest thermal expansion. Black-Right-Pointing-Pointer CaSiO{sub 3}, Ca{sub 3}Si{sub 2}O{sub 7} and BaCa{sub 2}Si{sub 3}O{sub 9} are suitable as components in high temperature seals. -- Abstract: Gas-tight seals based on glasses suitable for joining of materials with high thermal expansion coefficients are for example required for solid-oxide fuel cells. If these seals are to be used at high temperatures, they can only be fabricated from glasses which enable the crystallization of phases with high thermal expansion coefficients. This paper reports on some components from systems suitable for high thermal expansion seals: binary calcium silicates, CaSiO{sub 3}, Ca{sub 3}Si{sub 2}O{sub 7} and Ca{sub 2}SiO{sub 4} zinc silicates, Zn{sub 2}SiO{sub 4}, ternary silicates of BaO, CaO and ZnO, BaCa{sub 2}Si{sub 3}O{sub 9}, Ca{sub 2}ZnSi{sub 2}O{sub 7}, and one quaternary silicate, Ba{sub 2}CaZn{sub 2}Si{sub 6}O{sub 17,} studied by high-temperature X-ray diffraction. Only CaSiO{sub 3}, Ca{sub 3}Si{sub 2}O{sub 7} and BaCa{sub 2}Si{sub 3}O{sub 9} exhibit thermal expansion coefficients in the range suitable for high thermal expansion seals of 11.2-11.8 Multiplication-Sign 10{sup -6} K{sup -1} (100-800 Degree-Sign C). The thermal expansions strongly depend on the respective crystallographic axis. The coefficient of thermal expansion of a sealing glass is not only affected by the thermal expansions of the crystalline phases, but also by that of the residual glassy phase as well as by the elastic properties. The phase formation should carefully be controlled also with respect to aging.

36 MATERIALS SCIENCE↗

Effects of surface chemistry and microstructure of electrolyte on oxygen reduction kinetics of solid oxide fuel cells

In this study, we report systematic investigation of the surface properties of yttria-stabilized zirconia (YSZ) electrolytes with the control of the grain boundary (GB) density at the surface, and its effects on electrochemical activities. The GB density of thin surface layers deposited on single crystal YSZ substrates is controlled by changing the annealing temperature (750-1450 °C). Higher oxygen reduction reactions (ORR) kinetics is observed in samples annealed at lower temperatures. The higher ORR activity is ascribed to the higher GB density at the YSZ surface where 'mobile' oxide ion vacancies are more populated. Meanwhile, oxide ion vacancies concurrently created with yttrium segregation at the surface at the higher annealing temperature are considered inactive to oxygen incorporation reactions. Our results provide additional insight into the interplay between the surface chemistry, microstructures, and electrochemical activity. They potentially provide important guidelines for engineering the electrolyte electrode interfaces of solid oxide fuel cells for higher electrochemical performance.

36 MATERIALS SCIENCE↗

Performance characterization of metal-supported solid-oxide fuel cell stacks at elevated pressure

Here, in this paper, we present results on performance characterization of solid oxide fuel cell stacks at elevated pressures up to 6 bar a . Stacks are designed and built by Ceres Power, Ltd., and are rated at 1- and 5- kW e . Fuel streams include H 2 / N 2 mixtures, synthetic natural-gas reformate, and simulated anode tail-gas recycle. Elevated operating pressure serves to increase stack electrochemical performance, with the most-pronounced gains found up to 4 bar a . Pressurized operation reduces the extent of methane conversion, promoting more-uniform internal reforming and cooling within the stack. Such cooling is critical at higher-current conditions. A previously developed one dimensional computational stack model is used to provide insight into stack operation. Pressurization is found to slightly increase internal thermal gradients, while promoting more-uniform reactant-concentration profiles across the cell, reducing the likelihood of local fuel starvation. The high fuel dilution brought by anode recycle can modestly decrease stack performance; however, this decrease is recovered through elevated-pressure operation at 3 bar a . Anode recycle further promotes compositional uniformity across the cell. These results reflect that pressurized operation can promote stack performance, while potentially promoting long-term stack durability through uniformity in stack environmental conditions.

25 ENERGY STORAGE↗

Intermediate Temperature Solid Oxide Cell with a Barrier Layer Free Oxygen Electrode and Phase Inversion Derived Hydrogen Electrode

High-temperature solid oxide cells (SOCs) have fundamental advantages in efficiency and product rate over their low-temperature counterparts. However, the commercial development of SOCs is hindered by cost and reliability. To solve the issues, lowering the operating temperature of SOCs is deemed the best solution. Here we report on our effort toward intermediate temperature (IT) SOCs by developing a barrier layer free high-performance oxygen electrode and open structured hydrogen electrode. The results show that the new oxygen electrode provides reasonably good oxygen electrocatalytic activity at IT range for oxygen reduction and evolution reactions and the open structured hydrogen electrode provides low gas diffusion path for H 2 /H 2 O. However, at high electrolysis current density such as 1 A cm −2 and 650 °C, the present oxygen electrode delaminates after 200 h. The phase-inversion derived open structured hydrogen electrode helps gas diffusion but, in the meantime, reduces reactive sites. A proper balance of porosity and number of reactive sites is still needed for future hydrogen electrode development.

25 ENERGY STORAGE↗

Modeling Degradation in Solid Oxide Electrolysis Cells - Volume II

Idaho National Laboratory has an ongoing project to generate hydrogen from steam using solid oxide electrolysis cells (SOECs). To accomplish this, technical and degradation issues associated with the SOECs will need to be addressed. This report covers various approaches being pursued to model degradation issues in SOECs. An electrochemical model for degradation of SOECs is presented. The model is based on concepts in local thermodynamic equilibrium in systems otherwise in global thermodynamic non-equilibrium. It is shown that electronic conduction through the electrolyte, however small, must be taken into account for determining local oxygen chemical potential,, within the electrolyte. The within the electrolyte may lie out of bounds in relation to values at the electrodes in the electrolyzer mode. Under certain conditions, high pressures can develop in the electrolyte just near the oxygen electrode/electrolyte interface, leading to oxygen electrode delamination. These predictions are in accordance with the reported literature on the subject. Development of high pressures may be avoided by introducing some electronic conduction in the electrolyte. By combining equilibrium thermodynamics, non-equilibrium (diffusion) modeling, and first-principles, atomic scale calculations were performed to understand the degradation mechanisms and provide practical recommendations on how to inhibit and/or completely mitigate them.

08 HYDROGEN↗

Optimization of Solid Oxide Electrolysis Cell Systems Accounting for Long-Term Performance and Health Degradation

This study focuses on optimizing solid oxide electrolysis cell (SOEC) systems for efficient and durable long-term hydrogen (H2) production. While the elevated operating temperatures of SOECs offer advantages in terms of efficiency, they also lead to chemical degradation, which shortens cell lifespan. To address this challenge, dynamic degradation models are coupled with a steady-state, two-dimensional, non-isothermal SOEC model and steady-state auxiliary balance of plant equipment models, within the IDAES modeling and optimization framework. A quasi-steady state approach is presented to reduce model size and computational complexity. Long-term dynamic simulations at constant H2 production rate illustrate the thermal effects of chemical degradation. Dynamic optimization is used to minimize the lifetime cost of H2 production, accounting for SOEC replacement, operating, and energy expenses. Several optimized operating profiles are compared by calculating the Levelized Cost of Hydrogen (LCOH).

Giridhar, Nishant↗

Optimization of Solid Oxide Electrolysis Cell Systems Accounting for Long-Term Performance and Health Degradation

This study focuses on optimizing solid oxide electrolysis cell (SOEC) systems for efficient and durable long-term hydrogen (H2) production. While the elevated operating temperatures of SOECs offer advantages in terms of efficiency, they also lead to chemical degradation, which shortens cell lifespan. To address this challenge, dynamic degradation models are coupled with a steady-state, two-dimensional, non-isothermal SOEC model and steady-state auxiliary balance of plant equipment models, within the IDAES modeling and optimization framework. A quasi-steady state approach is presented to reduce model size and computational complexity. Long-term dynamic simulations at constant H2 production rate illustrate the thermal effects of chemical degradation. Dynamic optimization is used to minimize the lifetime cost of H2 production, accounting for SOEC replacement, operating, and energy expenses. Several optimized operating profiles are compared by calculating the Levelized Cost of Hydrogen (LCOH).

Giridhar, Nishant↗

Brazing of Stainless Steels to Yttria Stabilized Zirconia (YSZ) for Solid Oxide Fuel Cells

Recently, there has been a great deal of interest in research, development, and commercialization of solid oxide fuel cells. Joining and sealing are critical issues that will need to be addressed before SOFC's can truly perform as expected. Ceramics and metals can be difficult to join together, especially when the joint must withstand up to 900 C operating temperature of the SOFC's. The goal of the present study is to find the most suitable braze material for joining of yttria stabilized zirconia (YSZ) to stainless steels. A number of commercially available braze materials TiCuSil, TiCuNi, Copper-ABA, Gold-ABA, and Gold-ABA-V have been evaluated. The oxidation behavior of the braze materials and steel substrates in air was also examined through thermogravimetric analysis. The microstructure and composition of the brazed regions have been examined by optical and scanning electron microscopy and EDS analysis. Effect of braze composition and processing conditions on the interfacial microstructure and composition of the joint regions will be presented.

Shpargel, Tarah P.↗

Glass/Ceramic Composites for Sealing Solid Oxide Fuel Cells

A family of glass/ceramic composite materials has been investigated for use as sealants in planar solid oxide fuel cells. These materials are modified versions of a barium calcium aluminosilicate glass developed previously for the same purpose. The composition of the glass in mole percentages is 35BaO + 15CaO + 5Al2O3 + 10B2O3 + 35SiO2. The glass seal was found to be susceptible to cracking during thermal cycling of the fuel cells. The goal in formulating the glass/ ceramic composite materials was to (1) retain the physical and chemical advantages that led to the prior selection of the barium calcium aluminosilicate glass as the sealant while (2) increasing strength and fracture toughness so as to reduce the tendency toward cracking. Each of the composite formulations consists of the glass plus either of two ceramic reinforcements in a proportion between 0 and 30 mole percent. One of the ceramic reinforcements consists of alumina platelets; the other one consists of particles of yttria-stabilized zirconia wherein the yttria content is 3 mole percent (3YSZ). In preparation for experiments, panels of the glass/ceramic composites were hot-pressed and machined into test bars.

Bansal, Narottam P.↗