SEARCH · Engineering Papers

Results for “soil depth”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

All sources NASA NTRS DOE OSTI

NASA NTRS1975

Hydrogeological investigations in the Pampa of Argentina

In large areas of the Argentinian Pampa the salinization of ground water creates water supply difficulties. Investigations of satellite imagery (Landsat-1 and Skylab) which were based on an extensive ground survey revealed that differences in the vegetation cover are closely related to depth and salinity of ground water. Narrow elongated depressions called bajos are often the only indication of fresh ground water. They can be easily detected on the imagery. Due to their high resolution, Skylab photos even allow a quantitative estimation of fresh ground water situated below the bajos. In general however Landsat-1 imagery sufficed for evaluation. In the area of the Rio Tercero a fossil drainage pattern was discovered and in Corrientes province, soil types could be discriminated and compared to the Soil Map of the World.

Kruck, W.↗

NASA NTRS2004

Lunar and Planetary Science XXXV: Impacts on Mars and Earth

The session "Impacts on Mars and Earth" included the following reports:A Timescale for Major Events in Early Mars Crustal Evolution; Impact Craters in Arabia Terra, Mars; Ancient Giant Basin/Aquifer System in the Arabia Region, Mars; Small Crater Morphology Within Gusev Crater and Isidis Planitia: Evidence for Widespread Secondaries on Mars; Martian Surface Properties: Inferences from Resolved Differences in Crater Geometries; Asymmetric Ramparts of Secondary Craters in Cerberus, Mars: Interpretation and Implications for Local Stratigraphy; Depth to Diameter Relationships of Craters in the High Latitudes (70 -80 ) of Mars: Implications for Geologic History of Those Areas; Impact Cratering on Mars: Search for Target Influence on Morphology; Starting Conditions for Hydrothermal Systems Underneath Martian Craters: Hydrocode Modeling; Impact-induced Hydrothermal System at the Sudbury Crater: Duration, Temperatures, Mechanics, and Biological Implications; Major and Trace Element Variations in Impact Crater Clay from Chicxulub, Lonar, and Mistastin, Implications for the Martian Soil; Stable Isotopes and Hydrothermal Fluid Source in the Yaxcopoil-1 Borehole, Chicxulub Impact Structure, Mexico; and Chicxulub Impact Melts: Geochemical Signatures of Target Lithology Mixing and Post-Impact Hydrothermal Fluid Processes.

Source record↗

NASA NTRS2010

The Epiregolith

The physical properties of the lunar regolith were originally inferred from remotely sensed data, first from the Earth and later from orbiting spacecraft. The Surveyor landings and the Apollo surface explorations produced a more concrete characterization of the macroscopic properties. In general, the upper regolith consists of a loosely consolidated layer centimeters thick underlain by a particulate but extremely compacted layer to depths of meters or tens of meters. The median particle size as determined by mechanical sieving in terrestrial laboratories is several tens of micrometers. However, the comminuting processes that form the layer produce particles in all sizes down to manometers. The smallest particles, having a high surface to volume ratio, tend to be electrostatically bound to larger particles and are quite difficult to separate mechanically in the laboratory. Particle size distributions determined from lunar soil samples often group particles smaller than 10 micrometers.

Mendell, Wendell W.↗

NASA NTRS2003

AstroBioLab: A Mobile Biotic and Soil Analysis Laboratory

The Jet Propulsion Laboratory, Scripps Institution of Oceanography, and NASA Ames Research Center are currently developing a mobile Astrobiology Laboratory (AstroBioLab) for a series of field campaigns using the Chilean Atacama Desert as a Martian surface analog site. The Astrobiology Science and Technology for Exploring Planets (ASTEP) program funded AstroBioLab is designed around the Mars Organic Detector (MOD) instrument and the Mars Oxidant Instrument (MOI) which provide complementary data sets. Using this suite of Mars Instrument Development Program (MIDP) and Planetary Instrument Definition and Development Program (PIDDP) derived in situ instruments, which provide state-of-the-art organic compound detection (attomolar sensitivity) and depth profiling of oxidation chemistry, we measure and correlate the interplay of organic compounds, inorganic oxidants, UV irradiation and water abundance. This mobile laboratory studies the proposition that intense UV irradiation coupled with low levels of liquid water generates metastable oxidizing species that can consume moderate amounts of seeded organic compounds. Results from the initial spring 2003 field campaign will be presented.

J L Bada↗

NASA NTRS2002

NASA Remote Sensing Research as Applied to Archaeology

The use of remotely sensed images is not new to archaeology. Ever since balloons and airplanes first flew cameras over archaeological sites, researchers have taken advantage of the elevated observation platforms to understand sites better. When viewed from above, crop marks, soil anomalies and buried features revealed new information that was not readily visible from ground level. Since 1974 and initially under the leadership of Dr. Tom Sever, NASA's Stennis Space Center, located on the Mississippi Gulf Coast, pioneered and expanded the application of remote sensing to archaeological topics, including cultural resource management. Building on remote sensing activities initiated by the National Park Service, archaeologists increasingly used this technology to study the past in greater depth. By the early 1980s, there were sufficient accomplishments in the application of remote sensing to anthropology and archaeology that a chapter on the subject was included in fundamental remote sensing references. Remote sensing technology and image analysis are currently undergoing a profound shift in emphasis from broad classification to detection, identification and condition of specific materials, both organic and inorganic. In the last few years, remote sensing platforms have grown increasingly capable and sophisticated. Sensors currently in use, or nearing deployment, offer significantly finer spatial and spectral resolutions than were previously available. Paired with new techniques of image analysis, this technology may make the direct detection of archaeological sites a realistic goal.

Giardino, Marco J.↗

NASA NTRS2014

Taurus Littrow Pyroclastic Deposit-An Optimum Feedstock for Lunar Oxygen

Future human habitation of the Moon will likely require the use of locally derived materials because of the high cost of transportation from Earth. Oxygen, extracted from oxides and silicates, is a potentially abundant lunar resource vital for life support and spacecraft propulsion. The anticipated costs of supplying all oxygen needs for a lunar base from Earth are high enough to warrant serious study of oxygen production from local resources. Over 20 different processes have been proposed for oxygen production on the Moon. Among the simplest and best studied of these processes is the reduction of oxides in lunar minerals and glass using hydrogen gas. Oxygen can be extracted from lunar soils and pyroclastic glass beads by exposing the samples to flowing hydrogen at subsolidus temperatures (approx. 1050 C). Total oxygen yield is directly correlated to the sample's abundance of FeO, but is not correlated to the abundance of any other oxide. Oxygen is extracted predominantly from FeO, with lesser contributions from TiO2 and SiO2. Oxygen yield is independent of soil maturity. All major FeO-bearing phases contribute oxygen, with extraction from ilmenite and glass significantly more efficient than from olivine and pyroxene. This study demonstrates that the optimum location for a lunar resources demonstration mission can be identified, and that the oxygen yield can be predicted, using a combination of high-resolution imaging and thermal-infrared data. A mission to Taurus Littrow will encounter a deposit at least 10 m in depth with few landing hazards, a uniform composition, and a predicted oxygen yield of approximately 3 wt. %, among the highest values on the Moon.

Allen, Carlton C.↗

NASA NTRS1991

Evaluation of the sensitivity of reflectance ratios to mafic minerals in the lunar regolith

The 950/560-nm spectral ratio has been traditionally used as a qualitative indicator or lunar soil maturity because the 950-nm band falls within the major Fe(2+) mineral absorption bands near 1-micron characteristic of relatively immature crystalline surfaces. Since there are several other processes unrelated to maturation that may affect this ratio value, the 950/730-nm ratio has been evaluated as a potentially better measure of the relative 1-micron band strength. It is found that the 950/730-nm ratio appears to be much more sensitive to the 1-micron band depth, but it is believed that other unknown variables preclude using these single ratios to provide meaningful quantitative results at this time.

Larson, Stephen M.↗

NASA NTRS2002

Experiments and Spectral Studies of Martian Volcanic Rocks: Implications for the Origin of Pathfinder Rocks and Soils

The composition and spectral properties of the Mars Pathfinder rocks and soils together with the identification of basaltic and andesitic Mars terrains based on Thermal Emission Spectrometer (TES) data raised interesting questions regarding the nature and origin of Mars surface rocks. We have investigated the following questions: (1) are the Pathfinder rocks igneous and is it possible these rocks could have formed by known igneous processes, such as equilibrium or fractional crystallization, operating within SNC magmas known to exist on Mars? If it is possible, what P (depth) and PH2O conditions are required? (2) whether TES-based interpretations of plagioclase-rich basalt and andesitic terrains in the south and north regions of Mars respectively are unique. Are the surface compositions of these regions plagioclase-rich, possibly indicating the presence of old AI-rich crust of Mars, or are the spectra being affected by something like surface weathering processes that might determine the spectral pyroxene to plagioclase ratio?

Rutherford, Malcolm J.↗

NASA NTRS2019

Impact of Satellite Sea Surface Salinity Observations on ENSO Predictions from the GMAO Seasonal Forecast System

El Nino/Southern Oscillation (ENSO) has far reaching global climatic impacts and so extending useful ENSO forecasts would be of great benefit for society. However, one key variable that has yet to be fully exploited within coupled forecast systems is accurate estimation of near-surface ocean density. Satellite sea surface salinity (SSS), combined with temperature, help to identify ocean density changes and associated mixing near the ocean surface. We assess the impact of satellite SSS observations for improving near-surface dynamics within ocean analyses and how these impact dynamical ENSO forecasts using the NASA GMAO (Global Modeling and Assimilation Office) Sub-seasonal to Seasonal (S2S_v2.1) coupled forecast system (Molod et al. 2018 - i.e. NASA's contribution to the NMME (North American Multi-Model Ensemble) project). For all initialization experiments, all available along-track absolute dynamic topography and in situ observations are assimilated using the LETKF (Local Ensemble Transform Kalman Filter) scheme similar to Penny et al., 2013. A separate reanalysis additionally assimilates Aquarius V5 (September 2011 to June 2015) and SMAP (Soil Moisture Active Passive satellite) V4.1 (March 2015 to present) along-track data.We highlight the impact of satellite SSS on ocean reanalyses by comparing validation statistics of experiments that assimilate SSS versus our current prediction system that withholds SSS. We find that near-surface validation versus observed statistics for salinity are slightly degraded when assimilating SSS. This is an expected result due to known biases between SSS (measured by satellite at approximately 1-centimeter depth) and in situ measurements (typically measured by Argo floats at 3-meters depth). On the other hand, a very encouraging result is that both temperature, absolute dynamic topography, and mixed layer statistics are improved with SSS assimilation. Previous work has shown that correcting near-surface density structure via gridded SSS assimilation can improve coupled forecasts. Here we present results of coupled forecasts that are initialized from GMAO S2S spring reanalyses that assimilate/withhold along-track (L2) SSS. In particular, we contrast forecasts of the big 2015 El Nino, the 2017 La Nina and the 2018 weak El Nino. For each of these ENSO scenarios, assimilation of satellite SSS improves the forecast validation. Improved SSS and density upgrade the mixed layer depth leading to more accurate coupled air/sea interaction. From March to June 2015, the availability of two overlapping satellite SSS instruments, Aquarius and SMAP, allows a unique opportunity to compare and contrast forecasts initialized with the benefit of these two satellite SSS observation types. We assess the impact of gridded satellite sea surface salinity observations on dynamical ENSO forecasts for the big 2015 El Nino.

Hackert, E.↗

NASA NTRS2016

Multispectral VNIR Observations by the Opportunity Rover Pancam of Multiple Episodes of Aqueous Alteration in Marathon Valley, Endeavour Crater, Mars

Since early 2015, the Mars Exploration Rover Opportunity has been exploring the break in the rim of Endeavour Crater dubbed Marathon Valley by the rover team. Marathon Valley was identified by orbital hyperspectral data from the MRO CRISM as having a relatively strong spectral feature in the 2.3 micrometer region indicative of an Mg or Fe-OH combination overtone absorption band indicative of smectite clay. Earlier in its mission, Opportunity examined the Matijevic Hill region on the more northerly Cape York crater rim segment and found evidence for smectite clays in a stratigraphically lower, pre-impact formed unit dubbed the Matijevic formation. However, the smectite exposures in Marathon Valley appear to be associated with the stratigraphically higher Shoemaker formation impact breccia. Evidence for alteration in this unit in Marathon Valley is provided by Pancam multispectral observations in the 430 to 1010 nm visible/near infrared (VNIR) spectral range. Sinuous troughs ("red zones") contain fragmented cobbles and pebbles displaying higher blue-to-red slopes, moderately higher 535 nm band depths, elevated 754 to 934 nm, and negative 934 to 1009 nm slopes. The lack of an absorption at 864 to 904 nm indicates the lack of crystalline red hematite in these red zones, but likely an enrichment in nanophase ferric oxides. The negative 934 to 1009 nm slope is potentially indicative of the presence of adsorbed or structurally bound water. A scuff in a red zone near the southern wall of Marathon Valley uncovered light-toned soils and a pebble with an 803 to 864 nm absorption resembling that of light-toned Fe-sulfate bearing soils uncovered by the Spirit rover in the Columbia Hills of Gusev crater. APXS chemical measurements indicated enrichments of Mg and S in the scuff soils and the pebble, Joseph Field, with the strongest 803 nm band- consistent with Mg and Fe sulfates. The presence of Fe and Mg sulfates can be interpreted as evidence of a potentially later episode of aqueous alteration with an earlier, neutral to alkaline pH episode forming the Fe/Mg smectites and a later acid pH episode forming the Fe and Mg sulfates.

Farrand, William H.↗

NASA NTRS1972

Microwave properties of geological materials: Studies of penetration depth and moisture effects

Summarized are the results of two of a series of controlled experiments performed during the summer of 1970. The first series of experiments to determine penetration depth showed the value of having a modeled response and data reduced in real time for examination in the field. The results suggest a radiometric method for measuring the microwave properties of materials in bulk and are applicable to studies of sea ice and other naturally layered media. The sensitivity of the microwave emission to changes in moisture content has inspired a number of airborne and ground based investigations. Although the effect is dominent under certain conditions, the complicating factors of soil type, roughness, vegetation, etc. seem to govern the conclusions regarding its application at this time.

Blinn, J. C., III↗

NASA NTRS1977

Provenance of Apollo 15 deep drill core sediments

Modal analysis and electron probe microanalysis were performed on polished thin sections prepared from Apollo 15 deep drill core soils in an effort to characterize their provenance. The particles were in the 0.25-1.00 mm size range. The particles were classified into mineral fragments, agglutinates, glasses, rock fragments, and breccias. The results show that highland and mare material occur in the core in an approximately 60:40 ratio, with mare component generally increasing from bottom to top in the core. Quartz-normative basalts are nearly twice as abundant as olivine basalts. Nonmare sources include KREEP basalt flow units from some depth in the crust, excavated by cratering events and supplied to the site as 'rays'.

Basu, A.↗

NASA NTRS1984

Snowcover influence on backscattering from terrain

The effects of snowcover on the microwave backscattering from terrain in the 8-35 GHz region are examined through the analysis of experimental data and by application of a semiempirical model. The model accounts for surface backscattering contributions by the snow-air and snow-soil interfaces, and for volume backscattering contributions by the snow layer. Through comparisons of backscattering data for different terrain surfaces measured both with and without snowcover, the masking effects of snow are evaluated as a function of snow water equivalent and liquid water content. The results indicate that with dry snowcover it is not possible to discriminate between different types of ground surface (concrete, asphalt, grass, and bare ground) if the snow water equivalent is greater than about 20 cm (or a depth greater than 60 cm for a snow density of 0.3 g/cu cm). For the same density, however, if the snow is wet, a depth of 10 cm is sufficient to mask the underlying surface.

Ulaby, F. T.↗

NASA NTRS2002

Controls on Martian Hydrothermal Systems: Application to Valley Network and Magnetic Anomaly Formation

Models of hydrothermal groundwater circulation can quantify limits to the role of hydrothermal activity in Martian crustal processes. We present here the results of numerical simulations of convection in a porous medium due to the presence of a hot intruded magma chamber. The parameter space includes magma chamber depth, volume, aspect ratio, and host rock permeability and porosity. A primary goal of the models is the computation of surface discharge. Discharge increases approximately linearly with chamber volume, decreases weakly with depth (at low geothermal gradients), and is maximized for equant-shaped chambers. Discharge increases linearly with permeability until limited by the energy available from the intrusion. Changes in the average porosity are balanced by changes in flow velocity and therefore have little effect. Water/rock ratios of approximately 0.1, obtained by other workers from models based on the mineralogy of the Shergotty meteorite, imply minimum permeabilities of 10(exp -16) sq m2 during hydrothermal alteration. If substantial vapor volumes are required for soil alteration, the permeability must exceed 10(exp -15) sq m. The principal application of our model is to test the viability of hydrothermal circulation as the primary process responsible for the broad spatial correlation of Martian valley networks with magnetic anomalies. For host rock permeabilities as low as 10(exp -17) sq m and intrusion volumes as low as 50 cu km, the total discharge due to intrusions building that part of the southern highlands crust associated with magnetic anomalies spans a comparable range as the inferred discharge from the overlying valley networks.

Harrison, Keith P.↗

NASA NTRS2005

A Tower-based Prototype VHF/UHF Radar for Subsurface Sensing: System Description and Data Inversion Results

Knowledge of subsurface characteristics such as permittivity variations and layering structure could provide a breakthrough in many terrestrial and planetary science disciplines. For Earth science, knowledge of subsurface and subcanopy soil moisture layers can enable the estimation of vertical flow in the soil column linking surface hydrologic processes with that in the subsurface. For planetary science, determining the existence of subsurface water and ice is regarded as one of the most critical information needs for the study of the origins of the solar system. The subsurface in general can be described as several near-parallel layers with rough interfaces. Each homogenous rough layer can be defined by its average thickness, permittivity, and rms interface roughness assuming a known surface spectral distribution. As the number and depth of layers increase, the number of measurements needed to invert for the layer unknowns also increases, and deeper penetration capability would be required. To nondestructively calculate the characteristics of the rough layers, a multifrequency polarimetric radar backscattering approach can be used. One such system is that we have developed for data prototyping of the Microwave Observatory of Subcanopy and Subsurface (MOSS) mission concept. A tower-mounted radar makes backscattering measurements at VHF, UHF, and L-band frequencies. The radar is a pulsed CW system, which uses the same wideband antenna to transmit and receive the signals at all three frequencies. To focus the beam at various incidence angles within the beamwidth of the antenna, the tower is moved vertically and measurements made at each position. The signals are coherently summed to achieve focusing and image formation in the subsurface. This requires an estimate of wave velocity profiles. To solve the inverse scattering problem for subsurface velocity profile simultaneously with radar focusing, we use an iterative technique based on a forward numerical solution of the layered rough surface problem. The layers are each defined in terms of a small number of unknown distributions as given above. An a priori estimate of the solution is first assumed, based on which the forward problem is solved for the backscattered measurements. This is compared with the measured data and using iterative techniques an update to the solution for the unknowns is calculated. The process continues until convergence is achieved. Numerical results will be shown using actual radar data acquired with the MOSS tower radar system in Arizona in Fall 2003, and compared with in-situ measurements.

Moghaddam, Mahta↗

NASA NTRS1973

Effective use of ERTS multisensor data in the Great Plains

The author has identified the following significant results. It appears that identification of corn and soybeans as separate classes may not be feasible for the part of the growing season around August 15. It is hoped that at other points in the growing season separation of corn from soybeans will be possible. Visual examination of September 5 imagery indicates that later in the growing season, it is possible. The resolution of the 1:300,000 scale enlargement remained sharp enough to distinguish features important for making soil association maps. The land use pattern (range vs cultivated) was sharp as were the stream bottoms, stream valley sides, and stock ponds. The resolution of the 1:1,000,000 scale enlargement was less sharp on detail but it appears that some features could be quantitatively analyzed. Among these are the hydrologic features present such as stock ponds and the streams. It would appear that the total area of stock pond water on a frame could be measured, and, after ground truth established their average depth, the volume of water stored could be calculated and be monitored.

Myers, V. I.↗

NASA NTRS2006

Comets, Asteroids, and the Origin of the Biosphere

During the past few decades, the role of comets in the delivery of water, organics, and prebiotic chemicals to the Biosphere of Earth during the Hadean (4.5-3.8 Ga) period of heavy bombardment has become more widely accepted. However comets are still largely regarded as frigid, pristine bodies of protosolar nebula material that are entirely devoid of liquid water and consequently unsuitable for life in any form. Complex organic compounds have been observed comets and on the water rich asteroid 1998 KY26, which has color and radar reflectivity similar to the carbonaceous meteorites. Near infrared observations have indicated the presence of crystalline water ice and ammonia hydrate on the large Kuiper Belt object (50000) Quaoar with resurfacing that may indicate cryovolcanic outgassing and the Cassini spacecraft has detected water-ice geysers on Saturn s moon Enceladus. Spacecraft observations of the chemical compositions and characteristics of the nuclei of several comets (Halley, Borrelly, Wild 2, and Tempel 1) have now firmly established that comets contain a suite of complex organic chemicals; water is the predominant volatile; and that extremely high temperatures (approx.350-400 K) can be reached on the surface of the very black (albedo-0.03) nuclei when the comets are with 1.5 AU from the Sun. Impact craters and pinnacles observed on comet Wild 2 suggest a thick crust and episodic outbursts and jets observed on the nuclei of several comets are interpreted as indications that localized regimes of liquid water and water vapor can periodically exist beneath the crust of some comets. The Deep Impact observations indicate that the temperature on the nucleus of of comet Tempel 1 at 1.5 AU varied from 330K on the sunlit side to a minimum of 280+/-8 K. It is interesting that even the coldest region of the comet surface was slightly above the ice/liquid water phase transition temperature. These results suggest that pools and films of liquid water can exist in a wide range of temperatures in cavities and voids at different depths just beneath the crust of a comet. The possibility that liquid water may exist over a wide range of temperatures on comets significantly enhances the possibility that these bodies may harbor niches suitable for microbial communities and ecosystems. Such niches would by ideal for the growth of psychrophilic, mesophilic, and possibly even thermophilic chemolithotrophs and photoautotrophs such as the motile filamentous cyanobacteria (e.g., Calothrix, Oscillatoria, Phormidium, and Spirulina) that can grow in geothermal springs and geysers at temperatures ranging from 320K to 345K and in cold polar desert soils. This paper reviews the observational data in support of the hypothesis that liquid water can exist in permafrost-like active regions just beneath the surface of comets when near perihelion and provides additional arguments in support of the hypothesis that comets, carbonaceous meteorites, and asteroids may have played a significant role in the origin and evolution of the Biosphere and in the distribution of microbial life throughout the Solar System.

Hoover, Richard B.↗

NASA NTRSDate not supplied

Regional variability of dust single scattering albedo due to mineral composition

Nearly all Earth System Models (ESMs) assume globally homogeneous dust aerosols, neglecting regional variations of the imaginary refractive index (IRI) due to varying mineral composition. This has led to a range of single scattering albedo (SSA) and direct radiative forcing (DRF) estimates, as models assign global properties using dust measurements from different regions. We use model and observational data to assess to what extent regionally varying mineral composition affects visible-band SSA and short-wave DRF of dust. We run global simulations with NASA GISS ModelE2.1, using optical properties for minerals based on laboratory-derived empirical relationships between dust IRI at visible wavelengths and the mineral content of iron oxides. When allowing mineral variations instead of homogeneous dust, we find regional differences in dust SSA up to ~0.06 and consequent variations in DRF up to ~6 and ~5 W/m2, at surface and top-of-atmosphere respectively. We compare model SSA with AERONET inversion data (Version 3.0, Level 2), filtered by aerosol size and optical properties to identify pure dust scenes. To investigate possible contamination by biomass burning aerosols, we use the dataset of Schuster et al. (2016, doi:10.5194/acp-16-1565-2016), who separately calculated the contribution of iron oxides and carbonaceous species to AERONET extinction and absorption optical depths. Our results show that: (1) the range of observed SSA (even without carbonaceous species) is larger than that resulting from homogeneous dust; (2) residual amounts of fine mode black and brown carbon may affect AERONET SSA even in seasons with limited biomass burning; (3) model SSA from our mineral scheme exceeds the AERONET range, possibly due also to an uncertain treatment of goethite. In summary, homogeneous dust cannot explain the variability of observed SSA, so regionally varying optical properties based on mineral content are necessary. Higher accuracy in soil mineralogy maps is needed to better reproduce SSA variations at regional scales. Also, distinct soil maps for hematite and goethite are required, given the high sensitivity of model SSA to their extreme optical properties.

V. Obiso↗