Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “sinter”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
NASA NTRS1952

Experimental investigation of the heat-transfer characteristics of an air-cooled sintered porous turbine blade

The results of a heat-transfer investigation on a transpiration-cooled turbine blade are presented. The investigation was made on a static cascade.506::Declassified December 11, 1953. Blade-peripheral wall-temperature distributions were measured and compared with the temperature distribution on a convection-cooled blade. A correlation of the blade-wall temperatures obtained at various gas temperatures and gas weight flows was made on the basis of a temperature-difference ratio. Blade-wall temperatures calculated using an approximate theory for turbulent flow are compared with the measured blade-wall tempeartures.

Schafer, Louis J , Jr↗
NASA NTRS2005

Regolith Sintering: A Solution to Lunar Dust Mitigation?

The prospect for a human outpost or permanent lunar base conducting exploration science on the Moon has been discussed in a number of different venues [1-4]. Of all the technological difficulties that confront observatory science on the Moon, dust mitigation remains a serious issue that is either discussed candidly or is oversimplified. In view of the fact that fundamental physics and astronomy research continues to be proposed for a lunar base, the problem of lunar dust must be confronted. In particular, the recent suggestion to place a 20-meter liquid mirror telescope (LMT) on the Moon because "the Moon and liquid mirrors were made for each other" [5-6] shows that the technical readiness level for any new vision of returning to the Moon with such grand-scale ideas is immature. Dust mitigation needs to be addressed, and we present a conceptual strategy for providing a clean area for observational science on a return-to-flight basis using existing technology rather than an evolutionary one that remains undeveloped. Under certain assumptions and caveats, we believe it addresses the problem.

Wilson, T. L.↗
NASA NTRS2017

Sintered Cathodes for All-Solid-State Structural Lithium-Ion Batteries

All-solid-state structural lithium ion batteries serve as both structural load-bearing components and as electrical energy storage devices to achieve system level weight savings in aerospace and other transportation applications. This multifunctional design goal is critical for the realization of next generation hybrid or all-electric propulsion systems. Additionally, transitioning to solid state technology improves upon battery safety from previous volatile architectures. This research established baseline solid state processing conditions and performance benchmarks for intercalation-type layered oxide materials for multifunctional application. Under consideration were lithium cobalt oxide and lithium nickel manganese cobalt oxide. Pertinent characteristics such as electrical conductivity, strength, chemical stability, and microstructure were characterized for future application in all-solid-state structural battery cathodes. The study includes characterization by XRD, ICP, SEM, ring-on-ring mechanical testing, and electrical impedance spectroscopy to elucidate optimal processing parameters, material characteristics, and multifunctional performance benchmarks. These findings provide initial conditions for implementing existing cathode materials in load bearing applications.

Ceramics↗
DOE OSTI2024

Optimization and purification of magnesium borides fabricated by combustion synthesis and by high-temperature sintering

Hydrogen as a fuel provides several benefits over the use of fossil fuels; however, one challenge in utilizing hydrogen as an energy carrier revolves around its storage. Achieving sufficient volumetric hydrogen density in a storage solution will facilitate hydrogen’s adoption for use in both stationary and mobile applications. Solid-state hydrogen storage provides a promising pathway to solving this problem. However, the hydrogenation of these materials is characterized by slow kinetics and extreme thermodynamic conditions. Magnesium borohydride (Mg(BH4)2) is a promising material in hydrogen storage due to its reversible properties and a theoretical hydrogen capacity of 14.9 wt.%. To synthesize this material, combustion synthesis of magnesium borides (MgBx) has been implemented with the aim to further lower thermodynamic requirements for direct hydrogenation. A drawback of this process is the potential formation of oxide contaminants, which decrease hydrogenation/dehydrogenation and recyclability performance. The present work focuses on identifying parameters useful for reducing contamination and evaluating potential pathways to the purification of magnesium borides with the goal of improving their quality.

Camarena, Miguel Joaquin↗
DOE OSTI2026

Ripening of Rh Nanoparticle Catalysts in Reverse Water–Gas Shift via a Data-Driven Model Combining Physics, Theory, and Experiment

Degradation via sintering is an ongoing challenge that impedes the broad commercial success of supported metallic nanoparticle catalysts. To mitigate degradation via informed catalyst design and process operations, here we aim to disambiguate the underlying mechanisms of sintering by combining theory and experiment in a quantitative framework. While mechanistic sintering models exist, they only model a single sintering pathway, even though multiple sintering mechanisms can occur simultaneously or dominate at different stages of the process. Data-driven machine learning models have emerged as a means to represent complex processes through data regression. However, machine learning models have very large data needs and lack mechanistic insights due to their black-box encoding. To develop an interpretive model of catalyst degradation via sintering, we constructed a hybrid model combining mechanistic “physics-based” models and data-driven methods to obtain both reliable predictions and mechanistic insights regarding experimentally observed sintering phenomena. Focusing on nanoparticle sintering in the Rh–TiO 2 catalyst for the reverse water–gas shift (RWGS) reaction, the hybrid model couples a mechanistic term for Ostwald ripening with energy values calculated via density functional theory (DFT) with a parametric, data-driven discrepancy function term for unmodeled mechanisms. The hybrid model is trained using Bayesian inference with data collected from small-angle X-ray scattering (SAXS) in situ experiments wherein average nanoparticle diameter versus time was measured at three relevant operating temperatures. The calibrated hybrid model results show that an Ostwald ripening-only model parameterized with fixed DFT energies does not fully capture the time and temperature dependence of the SAXS-observed sintering kinetics, and that an additional functional contribution, or DFT energy calibration, is required to reconcile simulation and experiment. Analysis of the hybrid-model error confirms that the hybrid model outperforms both the purely mechanistic and purely data-driven alternatives in terms of expected predictive accuracy for time-evolving average particle sizes. Furthermore, the results support the hypothesis that the Ostwald ripening mechanism is less important for explaining the sintering phenomena as operating temperature increases under an assumed fixed DFT parameterization. This could be explained in one of two ways: either latent, unmodeled sintering mechanisms dominate at higher temperatures, or the DFT uncertainty increases with temperature. The proposed modeling approach directly links theory to experiments and simulations via a statistical hybrid modeling framework and can be extended to other catalytic systems to improve predictive models and mechanistic understanding.

Bayesian hybrid modeling↗
NASA NTRSDate not supplied

Metal Fused Filament Fabrication of Titanium Alloy for In Space Manufacturing

NASA is developing materials and processes for the in-space manufacturing of many items for the International Space Station (ISS) and future exploration platforms. These new manufacturing processes will require the further development of current 3D printing processes to achieve high-performance metal parts within the power and space constraints of the ISS. Manufacturing Ti-6Al-4V alloy parts with 3D printing using a metal fused filament fabrication (MF3) process is an alternative process to the Direct Metal Laser Sintering (DMLS) of the metal powders additive manufacturing process. Our initial work fabricating Ti-6Al-4V parts from Ti-6Al-4V powder-binder feedstock and processed with the MF3 process has resulted in 95-97% sintered densities. The current development work of optimized sintered properties investigates the effects of variation in sintering time, temperature, and vacuum on the sintered properties of Ti-6Al-4V MF3 printed tensile bars. Sintered properties such as density, hardness, and tensile properties were characterized followed by microstructural and chemical (O/C/N) analysis to understand the role of sintering process on the ensuing material properties. Future development of the MF3 process will also involve investigation of the effects of micro-milling the Ti-64Al-4V powder to nanometer particle sizes and the investigation of laser sintering of the 3D printed devices. This new micro-milling technique will have broad application to other areas that require particle size reduction of hard metallic materials, such as Nuclear Thermal Propulsion and other NASA technologies. Laser sintering in lieu of high temperature thermal sintering should allow for significant power reduction and improved processing speeds.

sintering, alloys, 3D printing↗
NASA NTRSDate not supplied

Microwave Structure Construction Capability Year One Accomplishments

The Microwave Structure Construction Capability (MSCC) element, part of the Moon to Mars Planetary Autonomous Construction Project (MMPACT) was initiated in 2020. MSCC is responsible for creating horizontal and vertical infrastructure on the moon using microwave energy. Microwave energy was selected since it is the only method to volumetrically heat the regolith. All other sintering/melting methods rely on thermal conduction through the very low conductivity surface, resulting in an inefficient process. Advances were achieved in materials characterization and understanding, microwave sintering in vacuum, and microwave design and analyses. Two dielectric property testing systems have been developed at Radiance Technologies and JPL. These will examine dielectric properties at cryogenic temperatures and over a broad frequency range. Permittivity and permeability testing at -60 ̊C in vacuum from 0.05 to 3 GHz has been generated at JPL. Additional modifications will be made to go to -190 ̊C (LN2). Radiance Technologies created a test system to measure dielectric properties at greater than 10 GHz and initiated work on developing a vacuum capable, portable test system to measure dielectric properties of Apollo regolith and simulants from 100 MHz to 18 GHz. These tests are to identify optimal heating frequencies and protocols. During microwave sintering at about 1100 ̊C, volatiles were creating difficulty in achieving a reasonably dense specimen. Due to processing in vacuum and the nature of the lunar regolith, some volatiles and porosity are expected. However, the Earth produced simulants have non-lunar materials in them that create volatiles that aren’t representative of lunar regolith. Therefore, a five month effort was conducted to establish a heat treat method to remove these non-lunar materials. Tests were conducted using TGA mass spectrometry, heating in vacuum and conducting mass spectrometry, dielectric and DTA, Raman, BET, particle size analysis, morphological analysis, carbon and sulfur chemical content determination and microscopy. The process has been scaled-up to 6 kg batch size and undergoing evaluation. A 36 kg batch size is the target for JSC-1A and other limited availability simulants. These calcining protocols will be standard for NASA and beyond. MSCC has also created scalable processes for fabricating synthetic lunar materials. Processes to fabricate Anorthite (plagioclase CaAl2Si2O8), Diopside (pyroxene CaMgSi₂O₆), and Enstatite (pyroxene Mg2Si2O6) have been generated. These materials will enable generation of microwave sintering models to bound various composition ranges anticipated on the Moon, therefore mitigating the need for a precise simulant with respect to location on the Moon. Successful microwave sintering in air using a horn applicator was demonstrated. All previous microwave vacuum sintering in the literature was at small scale and in a contained enclosure thus taking advantage of reflections. This is the first to use a lunar like microwave applicator to sinter ceramic in a bed as it would be done on the Moon. Small scale and inert sintering were conducted to assist in developing protocols with quicker turnaround times than larger scale testing. Testing has anchored thermal analysis predicting heat flow in vacuum during microwave sintering. Thermal conductivity testing was also initiated. Microwave coupling to the regolith has been modeled by multiple organizations and with different software packages. At least six horn designs and applicator configurations for both magnetron and solid state sources are being examined. Optimal simulant container designs for microwaves have also been generated. The power and electronics design for the solid state microwave system has been initiated. Concept designs for a lander based microwave sintering have been evaluated.

microwave↗