Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “shapes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Development of a process for producing ribbon shaped boron filaments

A ribbon-shaped boron filament with a tensile strength of 138 KN/sq cm (200 ksi) was investigated. The investigation was carried out using both carbon and tungsten as substrate materials. No satisfactory results were obtained utilizing uncoated, copper-plated or silicon carbide coated tungsten ribbon substrates. Carbon ribbon substrates were prepared by pyrolysis of stretched polyimide tape. A severe deposition gradient occurred in all dc reactor experiments due to convective cooling at the edge of the substrate that resulted in a weak, nonuniform filament. RF heating, however, completely eliminated this gradient problem and a 90 cm (35.5 in.) long boron ribbon was produced at .85 cm/sec (100 ft/hr) using a frequency of 40.68 megahertz. This boron ribbon, however, exhibited a light-bulb effect during deposition to 59 KN/sq cm (85.7 ksi) were obtained from this ribbon. Several silicon carbide ribbon shaped filaments were also produced during this investigation by decomposition of CH3SiHCl2 onto carbon substrates. Contrary to the boron work, silicon carbide ribbon was readily prepared in dc static reactors. A very uniform and smooth deposition was obtained with strengths up to 71.1 KN/sq cm (103.5 ksi).

Basche, M.↗
NASA NTRS1974

Material cutting, shaping, and forming: A compilation

Information is presented concerning cutting, shaping, and forming of materials, and the equipment and techniques required for utilizing these materials. The use of molds, electrical fields, and mechanical devices are related to forming materials. Material cutting methods by devices including borers and slicers are presented along with chemical techniques. Shaping and fabrication techniques are described for tubing, honeycomb panels, and ceramic structures. The characteristics of the materials are described. Patent information is included.

Source record↗
NASA NTRS1974

Design of FIR digital filters for pulse shaping and channel equalization using time-domain optimization

Three algorithms are developed for designing finite impulse response digital filters to be used for pulse shaping and channel equalization. The first is the Minimax algorithm which uses linear programming to design a frequency-sampling filter with a pulse shape that approximates the specification in a minimax sense. Design examples are included which accurately approximate a specified impulse response with a maximum error of 0.03 using only six resonators. The second algorithm is an extension of the Minimax algorithm to design preset equalizers for channels with known impulse responses. Both transversal and frequency-sampling equalizer structures are designed to produce a minimax approximation of a specified channel output waveform. Examples of these designs are compared as to the accuracy of the approximation, the resultant intersymbol interference (ISI), and the required transmitted energy. While the transversal designs are slightly more accurate, the frequency-sampling designs using six resonators have smaller ISI and energy values.

Houts, R. C.↗
NASA NTRS1974

Shapes of strong shock fronts in an inhomogeneous solar wind

The shapes expected for solar-flare-produced strong shock fronts in the solar wind have been calculated, large-scale variations in the ambient medium being taken into account. It has been shown that for reasonable ambient solar wind conditions the mean and the standard deviation of the east-west shock normal angle are in agreement with experimental observations including shocks of all strengths. The results further suggest that near a high-speed stream it is difficult to distinguish between corotating shocks and flare-associated shocks on the basis of the shock normal alone. Although the calculated shapes are outside the range of validity of the linear approximation, these results indicate that the variations in the ambient solar wind may account for large deviations of shock normals from the radial direction.

Heinemann, M. A.↗
NASA NTRS1974

Method of fabricating an object with a thin wall having a precisely shaped slit

A method is described for making a structure with a cavity and a thin wall with a precisely shaped slit. An object with a cavity having two openings, one of which is to be closed by a thin wall with a slit, is placed on the surface of a fixture. The fixture surface has a slot conforming to the size and shape of the slit to be formed in the thin wall.

Christopher, P. A.↗
NASA NTRS1974

Radar cross sections of standard and complex shape targets

The theoretical, analytical, and experimental results are described for radar cross sections (RCS) of different-shaped targets. Various techniques for predicting RCS are given, and RCS of finite standard targets are presented. Techniques used to predict the RCS of complex targets are made, and the RCS complex shapes are provided.

Sohel, M. S.↗
NASA NTRS1974

Experiment M115: Special hematologic effects: Dynamic changes in red cell shape in response to the space-flight environment

The significance of the transformations in red cell shape observed during the Skylab study must be considered relative to the limitation of man's participation in extended space flight missions. The results of this one study are not conclusive with respect to this question. Based on these examinations of red cells in normal, healthy men and based on other Skylab experiment data relative to the functional capacity of the red cells in vitro and the performance capacity of man as an integrated system, the changes observed would not appear to be the limiting factor in determining man's stay in space. However, the results of this experiment and the documented red cell mass loss during space flight raise serious questions at this time relative to the selection criteria utilized for passengers and crews of future space flights. Until the specific cause and impact of the red cell shape change on cell survival in vivo can be resolved, individuals with diagnosed hematologic abnormalities should not be considered as prime candidates for missions, especially those of longer duration.

Kimzey, S. L.↗
NASA NTRS1975

Shock shapes on blunt bodies in hypersonic-hypervelocity helium, air, and CO2 flows, and calibration results in Langley 6-inch expansion tube

Shock shape results for flat-faced cylinders, spheres, and spherically blunted cones in various test gases, along with preliminary results from a calibration study performed in the Langley 6-inch expansion tube are presented. Free-stream velocities from 5 to 7 km/sec are generated at hypersonic conditions with helium, air, and CO2, resulting in normal shock density ratios from 4 to 19. Ideal-gas shock shape predictions, in which an effective ratio of specific heats is used as input, are compared with the measured results. The effect of model diameter is examined to provide insight to the thermochemical state of the flow in the shock layer. The regime for which equilibrium exists in the shock layer for the present air and CO2 test conditions is defined. Test core flow quality, test repeatability, and comparison of measured and predicted expansion-tube flow quantities are discussed.

Miller, C. G., III↗
NASA NTRS1975

A corrugated horn antenna using V-shape corrugations

Corrugated horns use corrugations on the E-plane walls that are operating in the cutoff condition. In this paper, attention is focused on replacing the rectangular shaped corrugation with a V-shaped corrugation. The properties of the V corrugations are obtained using an integral equation solution; the results of the computational studies indicate that for operation of the V corrugations in the forbidden zone the depth of the corrugations lie between 0.3125 to 0.625 times the wavelength in contrast to the rectangular corrugations where the corresponding depth is 0.25 to 0.5 times the wavelength. The radiation patterns and impedance of two identical rectangular horns with corrugated E-plane walls using either V or rectangular corrugations are directly compared.

Mentzer, C. A.↗
NASA NTRS1975

The shape of the future long-haul transport airplane

Long-haul transport plane configurations are discussed that are considered technically feasible within a practical level of near-term technology. Supersonic and transonic aircraft are considered, as well as different types of subsonic transports. It is indicated that superior second-generation supersonic transports are quite feasible technically; in particular, it is shown that problems of fuel consumption, efficient overland flight, and questions on noise and nitric oxides have straightforward engineering solutions. Transonic aircraft are practical but would have to have a different geometry than subsonic aircraft to provide the versatility necessary to compete at one end of their capability with supersonic transports and at the other end, for shorter ranges, with subsonic transports. The shape of subsonic transports is not expected to change noticeably, although recent advances of airfoil technology imply that new subsonic transports would have wings with higher aspect ratios and somewhat less sweep. But large specialized freighter aircraft and very long range laminar flow control or nuclear-powered aircraft with radically new shapes are possible.

Clay, C. W.↗
NASA NTRS1975

Heat conduction in metal-filled polymers - The role of particle size, shape, and orientation

This paper presents a new type of analysis for predicting the thermal conductivity of disperse composites from the properties of the component phases and elementary characterizations of particle shapes and orientation. This analysis successfully predicted the sensitivity to particle shape which was confirmed by experiments also reported in this paper. These results suggest that highly elongated particles may be used to achieve dramatic modifications of thermal conductivity and the analysis presented here may be a useful tool in the design or development of disperse composites of specific thermal conductivity. The analysis may also apply to other properties such as electrical conductivity or magnetic permeability.

Hansen, D.↗
NASA NTRS1976

RF shaping of silicon ribbon

Electromagnetic force generated by radiofrequency coil is used to shape molten silicon. Shaping coil surrounds melt near solid-liquid interface and induces current in surface region of melt nearly equal to but opposite coil current.

Pelhank, D. A.↗
NASA NTRS1975

Average 2-6 keV pulse shapes of Hercules X-1 during the January 1972 'on' state

The available data on the Uhuru satellite sightings of observably bright ('on' state) Her X-1 during January 1972 are divided into eight intervals between successive eclipses. The average pulse shapes obtained are discussed. It is shown that the average pulse shape varies little during most of the 'on' state. However, during about the last three days of the 'on' state, the pulsations almost completely disappear. The results appear to support a class of models in which the 35-day cycle is due to variable obscuration of Her X-1 by a precessing accretion disk or other matter within the system.

Joss, P. C.↗
NASA NTRS1976

Silicon ribbon growth by a capillary action shaping technique

The crystal growth method described is a capillary action shaping technique. Meniscus shaping for the desired ribbon geometry occurs at the vertex of a wettable die. As ribbon growth depletes the melt meniscus, capillary action supplies replacement material. A capillary die is so designed that the bounding edges of the die top are not parallel or concentric with the growing ribbon. The new dies allow a higher melt meniscus with concomitant improvements in surface smoothness and freedom from SiC surface particles, which can degrade perfection.

Schwuttke, G. H.↗
NASA NTRS1977

Silicon ribbon growth by a capillary action shaping technique

The crystal-growth method under investigation is a capillary action shaping technique. Meniscus shaping for the desired ribbon geometry occurs at the vertex of a wettable dye. As ribbon growth depletes the melt meniscus, capillary action supplies replacement material. The configuration of the technique used in our initial studies is shown. The crystal-growth method has been applied to silicon ribbons it was found that substantial improvements in ribbon surface quality could be achieved with a higher melt meniscus than that attainable with the EFG technique.

Schwuttke, G. H.↗
NASA NTRS1976

A study to determine the characteristic shapes of helicopter visual approach profiles

On previous helicopter instrument approach studies, pilot comments frequently indicated that the deceleration profiles were characterized by 'unnatural cues', and it was found that the pilots were comparing the motion and attitude cues with those obtained during visual approaches. Prior to this study, the characteristic shape of visual approach profiles had not been formally documented. Over 200 visual approaches were flown using different helicopter types, test subjects, and initial conditions, and the altitude and groundspeed profiles were measured by a precision tracking radar. The data from each approach were then processed, and the characteristic shape of the altitude, groundspeed, and deceleration profiles was determined for each set of initial conditions. These flight data were processed further using graphical analysis techniques and parameterization, which, in turn, led to developing closed-form equations that accurately describe the characteristic groundspeed and deceleration profiles. Results from this study can be used to select instrument approach profiles, to develop instrument approach control laws, and to define the corresponding hardware requirements.

Moen, G. C.↗
NASA NTRS1978

Dip-molded t-shaped cannula

Cannula, fabricated out of polyetherurethane, has been designed for long-term service. Improved cannula is T-shaped to collect blood from both directions, thus replacing two conventional cannulas that are usually required and eliminating need for large surgical wound. It is fabricated by using dip-molding process that can be adapted to other elastomeric objects having complex shapes. Dimensions of cannula were chosen to optimize its blood-flow properties and to reduce danger of excessive clotting, making it suitable for continuous service up to 21 days in vein or artery of patient.

Broyles, H. F.↗
NASA NTRS1978

Manufacture of astroloy turbine disk shapes by hot isostatic pressing, volume 1

The Materials in Advanced Turbine Engines project was conducted to demonstrate container technology and establish manufacturing procedures for fabricating direct Hot Isostatic Pressing (HIP) of low carbon Astroloy to ultrasonic disk shapes. The HIP processing procedures including powder manufacture and handling, container design and fabrication, and HIP consolidation techniques were established by manufacturing five HIP disks. Based upon dimensional analysis of the first three disks, container technology was refined by modifying container tooling which resulted in closer conformity of the HIP surfaces to the sonic shape. The microstructure, chemistry and mechanical properties of two HIP low carbon Astroloy disks were characterized. One disk was subjected to a ground base experimental engine test, and the results of HIP low carbon Astroloy were analyzed and compared to conventionally forged Waspaloy. The mechanical properties of direct HIP low carbon Astroloy exceeded all property goals and the objectives of reduction in material input weight and reduction in cost were achieved.

Eng, R. D.↗