Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “sequestration”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Sr 2 MnO 4 as a reactive CO 2 sorbent for sorption-enhanced steam reforming of biogas to green hydrogen

Sorption-enhanced steam biogas reforming is an attractive approach for hydrogen production from renewable resources, with the performance of the CO 2 sorbents being a critical factor. In this study, Sr 2 MnO 4 was investigated as a redox-activated CO 2 sorbent for sustainable hydrogen production from biogas. The Sr 2 MnO 4 sorbents exhibited a CO 2 sorption capacity of over 26 g per 100 g of sorbents, along with excellent cyclic stability in thermogravimetric analysis. Complete regeneration of the sorbent was achieved with a relatively small temperature swing (100 °C). Fixed-bed reactor experiments further demonstrated the application of Sr 2 MnO 4 sorbents in sorption-enhanced steam biogas reforming. Biogas simulants with varying CO 2 contents were converted to ~94 vol% H 2 before CO 2 breakthrough. Stable CO 2 capacity and hydrogen production were maintained over 20 cycles. In addition, optimization of the regeneration duration enabled the generation of highly pure CO 2 and more efficient use of O 2 . These results support the feasibility of biogas-to‑hydrogen conversion with net-negative carbon emissions through integration with CO 2 capture and sequestration.

09 BIOMASS FUELS↗
DOE OSTI2025

Influence of extreme temperature conditions on CO 2 direct air capture using amino-acid solutions

Geological features play a pivotal role in determining the feasibility of deploying CO₂ direct air capture (DAC) technologies, primarily because they influence the availability of cost-effective energy sources, such as natural gas and geothermal energy, and also due to the potential for CO₂ sequestration. Many regions face challenges due to variable weather conditions including seasonal temperature fluctuations, high or low humidity, and sub-ambient temperatures. These extremes can reduce DAC performance or even lead to catastrophic events. Aqueous solvents considered for DAC systems are particularly vulnerable to seasonal variations in colder climates, where the solvent may underperform or freeze. It is therefore essential to investigate the CO₂ capture efficiency of aqueous solvents across a broad range of environmental temperatures, spanning sub-zero to hot conditions (>30 °C). In this study, DAC operation is examined using a high-flux solvent–air crossflow contactor under two major weather scenarios: (i) cold conditions below 0 °C and (ii) hot conditions above 30 °C. A parametric study is conducted to investigate the contactor performance regarding CO₂ removal efficiency, uptake capacity, and reaction kinetics versus temperature when the air velocity through the contactor exceeds 1 m/s. The efficacy of the contactor is systematically investigated using various anti-freeze amino-acid solvent formulations. A mass-transfer mechanistic model is developed to assess the process performance over a wide temperature range and propose scalable design guidelines. Machine learning is also employed to identify key parameters affecting the CO₂ capture efficiency. It is shown that air velocity and temperature are the primary factors influencing CO₂ uptake. Based on performance data obtained under subfreezing temperatures, a technoeconomic analysis is conducted to evaluate the feasibility of using aqueous solvents in seasonal cold regions. In conclusion, the findings of this study provide valuable insights into siting considerations for deploying solvent-based DAC, thereby contributing to the advancement of sustainable carbon removal solutions.

Air–liquid contactor↗
DOE OSTI2023

Mechanochemical formation of highly stable amorphous calcium carbonate in calcium silicates: Potential long-term storage of CO 2 in cement

Here, we have investigated mechanochemical reactions with the calcium silicate wollastonite to probe potential mechanisms of sequestration and long-term storage of CO 2 as mineral carbonates in cement pastes. Wollastonite, CaSiO 3 , was milled under ambient and 13 C enriched CO 2 atmospheres. Milling induced a structure change from monoclinic wollastonite-2M to triclinic-1T, consistent with high pressure treatment. The results from solid-state 13 C nuclear magnetic resonance (NMR) spectroscopy shows this process forms an extraordinarily stable amorphous calcium carbonate (ACC) phase that remains despite a high temperature dehydration treatment (130 °C) and persists in the same form after 3 yrs. of storage at ambient conditions. Thermogravimetric analysis (TGA) of these samples indicates that ACC is produced at the similar solid concentrations in both CO 2 -enriched and ambient atmospheres. The observation of meta-stable ACC due to wollastonite carbonation may play an important role in further exploration and optimization of mineral carbonation reactions for CO 2 capturing cement formulations.

13C solid-state NMR↗
DOE OSTI2025

Enhancing carbon nanotube production from carbon dioxide and ethane using bimetallic catalysts

Converting CO 2 into carbon nanotubes (CNTs) offers a promising way for CO 2 utilization and sequestration, potentially mitigating environmental impacts from anthropogenic emissions. This study reports that bimetallic CoFe catalysts can increase CNT production from the reaction of CO 2 and C 2 H 6 by an order of magnitude compared to their monometallic counterparts. The active sites and CNT morphologies are composition-dependent: Co-rich catalysts (Co/Fe ratio ≥ 5) form stable face-centered cubic (fcc) CoFe alloys, producing cylindrical CNTs; Fe-containing catalysts (Co/Fe ≤ 2) favor body-centered cubic (bcc) CoFe alloy upon reduction, which transforms into carbides, resulting in bamboo-like CNTs. Experimental evidence and DFT calculations reveal that adjacent Fe and Co atoms modulate CO and C x H y adsorption, regulating CNT production pathways through the CO Boudouard reaction and C 2 H 6 decomposition. In conclusion, these results highlight the dual benefits of bimetallic catalysts in enhancing CNT yield and controlling CNT morphology through adjustment of catalyst compositions.

58 GEOSCIENCES↗
DOE OSTI2024

Characterizing the combined impact of nucleation-driven precipitation and secondary passivation on carbon mineralization

The evolution of mineral reactive surface area is one of the primary phenomena controlling the progression and extent of mineral carbonation. The CO 2 mineralization begins with nucleation of crystals that provide initial surface area for subsequent growth of the mineral. However, many reactive transport models (RTMs) for CO 2 mineralization do not include the nucleation process. The few RTMs that do include it are yet to be validated against experimental data. Similarly, many RTMs ignore passivating effects of the secondary mineral, which coats the surface of the dissolving mineral, slow down the reaction process, and reduce the total extent of carbonation. Furthermore, the combined impact of nucleation and passivation on carbon mineralization is yet to be properly characterized. In this study, we consider the coupled effects of passivation and nucleation on the mineralization extent. The nucleation-driven precipitation model relies on the formation of nuclei to provide a surface area for crystal growth, while a new model is proposed to account for passivation effects. Our analysis shows that (i) omission of nucleation leads to overestimation of extent of mineralization, and (ii) omission of passivation leads to overestimation of host rock reactivity. The model was evaluated via comparison with CO 2 mineralization data from the literature and models that ignore these processes. We observed that including nucleation and passivation lead to closer predictions of the CO 2 mineralization extent. Therefore, this study highlights the importance of including the coupled nucleation-driven precipitation and secondary passivation in RTMs. Here, the findings from the study can be applied in various scientific and engineering applications such as petroleum production, cement carbonation, CO 2 sequestration, chemical weathering, and concrete degradation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Chemical impacts of subsurface CO 2 and brine on shallow groundwater quality

Leakage from geologic CO 2 sequestration (GCS) sites to overlying shallow drinking water aquifers is a tangible risk. A primary purpose of this study is to assess the potential impacts of CO 2 leakage into a fresh-water aquifer with associated CO 2 -water-sediment interactions. Here, the study site is the Ogallala aquifer overlying an active demonstration-scale GCS site in north Texas, USA. Using the results of combined batch experiments and reactive transport simulations, we discuss the effects of salinity on potential trace metal release and the potential for groundwater quality recovery after leakage ceases.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Pressure-stabilized fixed-stress iterative solutions of compositional poromechanics

We consider the numerical behavior of the fixed-stress splitting method for coupled poromechanics as undrained regimes are approached. We explain that pressure stability is related to the splitting error of the scheme, not the fact that the discrete saddle point matrix never appears in the fixed-stress approach. This observation reconciles previous results regarding the pressure stability of the splitting method. Using examples of compositional poromechanics with application to geological CO sequestration, we see that solutions obtained using the fixed-stress scheme with a low order finite element-finite volume discretization which is not inherently inf-sup stable can exhibit the same pressure oscillations obtained with the corresponding fully implicit scheme. Moreover, pressure jump stabilization can effectively remove these spurious oscillations in the fixed-stress setting, while also improving the efficiency of the scheme in terms of the number of iterations required at every time step to reach convergence.

42 ENGINEERING↗
DOE OSTI2021

Surfactant inhibition mechanisms of carbonate mineral dissolution in shale

Surfactants are common additives to hydraulic fracturing and enhanced oil recovery (EOR) fluids, and are under consideration for amendment to supercritical carbon dioxide for geological carbon sequestration (GCS). The effect of a common anionic surfactant, internal olefin sulfonate (IOS), on mineral dissolution from shale into brine was evaluated. When added to brine at concentrations exceeding the critical micelle concentration (94 mg/L), IOS inhibited carbonate mineral dissolution in an Eagle Ford shale, as well as dissolution of optical quality calcite (the dominant carbonate in the shale). Laser profilometry images provide spatial resolution across > 3 orders of magnitude, and indicate that IOS addition to brine both enhances the formation of new etch pits in calcite, and impedes their further growth. Time-of-flight secondary ion mass spectrometry surface profiles show for the first time that IOS preferentially adsorbs at calcite pit edges versus flat calcite surfaces (i.e., terraces). Surface pressure calculations, sulfur K-edge near edge X-ray absorption fine structure (NEXAFS) spectroscopy results, and density functional theory (DFT) calculations support this observation; the DFT results indicate that the sulfonate head group of the IOS molecule binds strongly to the calcite step site as compared to the terrace site. The S K-edge NEXAFS results indicate that IOS adsorbed more to etched calcite surfaces compared to smooth calcite surfaces. Overall, the results indicate that weak adsorption on flat calcite surfaces (i.e., terraces) disrupts water structure and enhances mass transfer of dissolution, while strong adsorption on calcite pit edges displaces adsorbed water and inhibits further etch pit growth. This work provides the first direct evidence of preferential adsorption of IOS to etched calcite surfaces and links it to macroscopic dissolution kinetics. Finally, this work has implications for surfactant-containing fluids used in hydraulic fracturing, EOR and potentially GCS for subsurface injection into carbonate rich reservoirs.

36 MATERIALS SCIENCE↗
DOE OSTI2025

ITreeForeCast: An integrated modeling software to simulate tree level growth and forest carbon storage

Healthy trees in forest act as a natural carbon sink, capturing carbon. As they grow, they store carbon in their trunks, leaves and roots. Not all trees store carbon at the same rate, or in the same quantities, as it depends on a variety of biophysical and climatic factors. Furthermore, although carbon estimation in trees can be complex, the precision of estimates is tightly linked to trees growth, both in diameter and height. However, the simulation of carbon uptake by forest and forest growth has each been modeled separately, and independently at differing levels of detail and spatial resolution. In this paper, we introduce ITreeForeCast, a simulation model combining the two types of modeling on a unified platform, enabling the investigation of impacts of management strategies on carbon sequestration and wood products. ITreeForeCast is a user-extendable framework that offers new opportunities to model, simulate, and visualize the dynamics of individual trees in a forest, simulate management strategies over time, and carbon uptake.

09 - BIOMASS FUELS↗
DOE OSTI2025

Quantitative multiplexed analysis of gene and protein expression patterns in Yarrowia lipolytica

In this report, we present coordinated observations of protein and mRNA transcript counts at the single-cell level in the oleaginous yeast model Yarrowia lipolytica. The transcription factor Xbp1p regulates entry into a quiescent state, representing a shift of resources to sequestration of nutrients rather than cell division. We observed the responses of wild-type and Δxbp1 cells to protein (by fluorescence) and transcript quantification and localization at both single-cell and population-averaged levels. Data were collected via single-molecule fluorescence in situ hybridization (smFISH) and qPCR under nitrogen depletion, a condition that drives lipid accumulation. These techniques reveal a complex and heterogeneous population of Xbp1p dynamics and downstream regulation. Our findings highlight the need for single-cell resolution analyses to describe cellular dynamics and regulatory processes.

Yarrowia lipolytica↗
DOE OSTI2025

Enhancing carbon storage through proactively managing fire-prone coniferous mountain forests

Mountain ecosystems typically serve as carbon (C) sinks. However, studies also suggest that they could be C sources due to climate warming, drought and insect-related mortality, wildfires, and management actions. We applied the Lund-Potsdam-Jena General Ecosystem Simulator (LPJ-GUESS), a process-based dynamic vegetation-ecosystem model, to investigate the role of ecosystem management in C storage under Mediterranean climate over the 21 st century. We modified LPJ-GUESS to include implementing mechanical thinning by vegetation size classes, components, and types along with a new mechanistic fire-occurrence model that accounts for wind speed and lightning ignition. Simulations show that mechanical thinning or prescribed fire performed 5-20 years in advance of a high-severity wildfire reduced direct wildfire C emissions by 38-66 %. Our results also show that long-term management actions repeated every 5-20 years, including thinning relatively small trees (diameters up to 7 inches or ∼178 mm), can maintain stable C levels in the forest and lower dead-fuel amounts. We found that, although prescribed fire mitigated wildfire severity, ecosystem C storage from reduced wildfire emissions can be outweighed by the added emissions from the prescribed fire themselves. Thinning plus removing and sequestering the thinned biomass can ensure that forests act as net C sinks through the end of the 21 st century. However, addition of prescribed fire is needed to reduce understory and lower the projected extent of high-severity wildfire. Achieving the competing goals of reducing wildfire and making the Sierra Nevada long-term C sink can be advanced through carefully coordinated thinning, sequestration of thinned biomass, and prescribed fire.

Climate solutions↗
DOE OSTI2021

Maximizing oil production from water alternating gas (CO 2 ) injection into residual oil zones: The impact of oil saturation and heterogeneity

Residual oil zones (ROZs) are widespread reservoirs, characterized by oil at residual saturation, either underlying oil fields (brownfield) or lateral (greenfield) to such fields. These reservoirs have the potential to produce volumes of oil sufficiently significant to make appreciable impacts on the US’s oil reserves and associated incidental CO 2 sequestration. The objective of this study is to improve our understanding the impact of heterogeneous and low oil saturations, in brownfield ROZs, on the effectiveness of water alternating gas (WAG) injection strategies. ROZs occur in the Permian Basin and elsewhere, and operators are using CO 2 injection for enhanced oil recovery (EOR) in these zones. The consensus model for the formation of ROZs is that they were formed by the effect of faster regional aquifer flow, acting over millions of years. Both the magnitude of oil saturation and the spatial distribution of oil differ from water-flooded main pay zones (MPZs). To explore the most effective injection strategies, we conducted simulations of CO 2 injection into synthetic geologic reservoirs. These simulations focused on injection into reservoirs subject to either man-made waterflooding or long-term natural waterflooding. By exploring the impact of varying: oil saturation; well patterns; reservoir heterogeneity; and permeability anisotropy, we attempt to quantify the factors that most influence the effectiveness of WAG injection. WAG ratios (the ratio of injected water and CO 2 , in reservoir volumes) of interest are those that either minimize the net CO 2 utilization ratios or maximize oil production rates. In general, the most effective WAG ratios for ROZs, are consistently less than those observed undergoing CO 2 injection in the same geologic reservoir models after traditional (man-made) waterflooding. This work demonstrates that most favorable WAG ratios for oil production in ROZs are different from those in traditional MPZs because of oil saturation differences. Therefore, CO 2 injection into both zones or directly copying WAG injection designs from MPZs to ROZs might not maximize oil production.

04 OIL SHALES AND TAR SANDS↗
DOE OSTI2022

Investigation of enhanced CO 2 storage in deep saline aquifers by WAG and brine extraction in the Minnelusa sandstone, Wyoming

Geological CO 2 sequestration in deep saline aquifers has been extendedly investigated to reach the goal of carbon neutral as large amount of CO 2 can be reduced in a short time. Here, this study investigates the feasibility of water-alternating-gas (WAG) injection and brine extraction on enhancing CO 2 storage in a target deep saline aquifer, Minnelusa Sandstone in the Powder River Basin (PRB) of Wyoming. An integrated numerical model is developed to account for four scenarios: (1) CO 2 continuous injection (CI) through one injection well, (2) WAG injection through one injection well, (3) CO 2 CI through one injection well and brine extraction through one producer, (4) WAG injection through one injection well and brine extraction through one producer. Simulation results suggest that WAG injection and brine extraction corporately make it possible to enhance CO 2 injectivity while securing CO 2 storage safety. For instance, WAG injection considerably reduces structural trapping contribution while enhances dissolved and residual trapping contributions. As for brine extraction, it can decrease the maximum averaged reservoir pressure by 37% and 22% for CI and WAG injection, respectively. Besides, sensitive analyses of the operational parameters for the fourth scenarios are performed. Results reveal that, when the amount of total CO 2 injection has been predetermined, CO 2 injection time and rate within each period of WAG should be small whereas it is preferable to have large water injection time and rate. This is to secure desirable dissolved and residual trapping contributions (store CO 2 with safety). Sensitive degree results confirm that CO 2 injection rate, water injection time, and CO 2 injection time of WAG injection exhibit significant effects on CO 2 storage whereas the impacts of producer bottom-hole pressure (BHP), water injection rate, and CO 2 -water injection time are relatively weaker. This study not only sheds light on achieving double-win goal: enhance CO 2 injectivity and store CO 2 with safety, but also can be a critical reference for other CO 2 storage in deep saline aquifers.

58 GEOSCIENCES↗
DOE OSTI2023

Urban mining from biomass, brine, sewage sludge, phosphogypsum and e-waste for reducing the environmental pollution: Current status of availability, potential, and technologies with a focus on LCA and TEA

We discuss how rapid industrialization, improved standards of living, growing economies and ever-increasing population has led to the unprecedented exploitation of the finite and non-renewable resources of minerals in past years. It was observed that out of 100 BMT of raw materials processed annually only 10% is recycled back. This has resulted in a strenuous burden on natural or primary resources of minerals (such as ores) having limited availability. Moreover, severe environmental concerns have been raised by the huge piles of waste generated at landfill sites. To resolve these issues, ‘Urban Mining’ from waste or secondary resources in a Circular Economy’ concept is the only sustainable solution. The objective of this review is to critically examine the availability, elemental composition, and the market potential of the selected secondary resources such as lignocellulosic/algal biomass, desalination water, sewage sludge, phosphogypsum, and e-waste for minerals sequestration. This review showed that, secondary resources have potential to partially replace the minerals required in different sectors such as macro and microelements in agriculture, rare earth elements (REEs) in electrical and electronics industry, metals in manufacturing sector and precious elements such as gold and platinum in ornamental industry. Further, inputs from the selected life cycle analysis (LCA) & techno economic analysis (TEA) were discussed which showed that although, urban mining has a potential to reduce the greenhouse gaseous (GHG) emissions in a sustainable manner however, process improvements through innovative, novel and cost-effective pathways are essentially required for its large-scale deployment at industrial scale in future.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Earthquake-triggered submarine canyon flushing transfers young terrestrial and marine organic carbon into the deep sea

Submarine canyons transfer substantial amounts of sediment and organic carbon (OC) into the deep ocean, nourishing deep-sea ecosystems and contributing to the global carbon cycle through OC burial and sequestration. Tracking lateral OC transport through submarine canyon systems is challenged by the deep-ocean setting, difficulties with constraining episodic depositional events, and the need to assess the composition and age of marine and terrestrial organic matter. We apply innovative parallel ramped pyrolysis oxidation accelerator mass spectrometry and pyrolysis-gas chromatography-mass spectrometry with isotope analyses to track OC age and sources in the 2016 Kaikoura earthquake-triggered, canyon-flushing event that deposited along >1300 km of a submarine canyon-channel system, offshore Aotearoa New Zealand. Specifically, these techniques allow us to determine the ages, sources, and partitioning of OC within the Kaikoura turbidite deposit and test hypotheses of how submarine canyon systems contribute to lateral OC flux and burial. Our results show that, despite considerable canyon floor erosion, substantial amounts of young OC were flushed into the deep sea, with relatively little (~2%) pre-Holocene OC contributions. Even without a direct connection between rivers and submarine canyons, most (~55%) of the OC in the Kaikoura event bed is from terrestrial sources. However, the deposit also contains substantial amounts (~22%) of marine-derived OC and ~23% of the material is of unassignable origin. Particle sorting imparts variability on the age and composition of OC within turbidite deposits and along the turbidity current flow path. Terrestrial-derived OC is preferentially older than marine-derived OC and concentrated in coarser particle sizes found more commonly at the deposit base and in proximal settings. Young, marine-derived OC is concentrated at the surface of the deposits and tends to be enriched in finer particle sizes. Such OC partitioning in turbidites supports the relevance of depositional models for predicting and quantifying distribution of OC in deep-sea deposits. Earthquake-triggered, canyon flushing events and resulting turbidites enhance OC burial efficiency and can sequester OC effectively, contributing an important carbon sink to the sedimentary carbon cycle.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Impact of low-chemical storage pretreatment of loblolly pine bark on biochar from microwave pyrolysis

Forest product residues such as bark represent a low-cost, abundant feedstock for bioenergy, but their high ash and alkali and alkaline earth metal (AAEM) content limit thermochemical conversion efficiency. This study evaluates the use of low-severity chemical pretreatments during anaerobic storage to improve the performance of microwave pyrolysis for loblolly pine bark. Bark was treated with dilute sulfuric acid (0.1% and 1%, w/w) or sodium hydroxide (4%, w/w) and incubated anaerobically for one or two weeks to simulate in-pile biorefinery storage. The most effective treatment—1% H2SO4 for two weeks—reduced AAEM content by 35.7% and increased bio-oil yield by 11% compared to untreated controls, while also reducing pyrolysis gas production. In contrast, alkali treatment did not reduce AAEM levels and led to decreased bio-oil yields with increased gas formation. Although biochar yields were relatively stable across treatments, their physicochemical characteristics varied significantly. Acid-treated bark yielded biochars with higher carbon content, lower O/C and H/C ratios, greater surface area, and enhanced heating values. These improvements suggest that chemical pretreatment during storage can tailor biochar quality for specific end uses. Biochars produced under optimized conditions exhibited properties suitable for soil amendment, carbon sequestration, and solid fuel applications. This integrated approach—combining storage, mild chemical conditioning, and microwave pyrolysis—provides a viable pathway to enhance the value and sustainability of bark-derived bioenergy products.

09 - BIOMASS FUELS↗
DOE OSTI2025

Soil porous microstructure control over soil organic matter mobility: A multimethod workflow for understanding chemistry-dependent organic matter binding in soil

Soil organic matter (SOM) has attracted a great deal of interest; particularly for its potential to mitigate human derived CO 2 emissions. Studies have demonstrated that SOM plays a critical role in carbon storage and CO 2 sequestration. However, the sorption properties of SOM, which influence its transport in pore water and stabilization within the soil, remain poorly understood. This study develops a workflow to: (1) examine compound-specific advective and diffusive transport and desorption behaviors, (2) quantify desorption rates through stop-flow and continuous-flow column experiments, and (3) evaluate the impact of soil microporosity on SOM mobility using high-resolution imaging and extractions. Intact core column experiments were conducted on Uncultivated (Natural) and Cultivated soil samples, both were arid soils, collected in Washington State. X-ray computed tomography was employed to measure porosity and pore connectivity, while Fourier-transform ion cyclotron resonance mass spectrometry was used to analyze SOM composition. The findings revealed that cultivation increased total carbon and nitrogen levels due to irrigation and fertilization, enhancing carbon capture potential in arid soils. In contrast, the Natural soil, characterized by higher porosity and connectivity, contained more oxidized carbon. Pore network analysis indicated that soil compaction in the Cultivated soil may lead to longer diffusion pathways, significantly influencing SOM transport and stability.

Hydraulic Properties↗
DOE OSTI2021

Temporal nitrogen dynamics in intensively managed loblolly pine early stand development

Forest production is strongly dependent on nutrient uptake; however, sustainable management of intensively managed plantations requires an improved understanding of this relationship when fertilization occurs frequently across short rotations. Here, we studied temporal nitrogen (N) concentration ([N]) and content (Nc) dynamics under different silvicultural practices (herbicide, fertilization, and planting density) throughout early loblolly pine (Pinus taeda) stand development (5 years). We describe relationships of [N] and Nc of different stand components (foliage, branches, stem, roots, and competing vegetation) with carbon and biomass. Our results demonstrate that [N] of perennial loblolly tissues do not respond to silvicultural practices and progressively decrease through development. While foliar [N] was most responsive to resource availability, it was not consistent across time. Controlling competing vegetation was crucial to promote the use of site resources by the crop tree and increased loblolly Nc by >500%. However, increased N uptake and expedited growth is dependent upon fertilization early in stand development. At age 5, herbicide plus reduced and full fertilization rates exhibited similar aboveground Nc, which was 32% higher than with herbicide only. Increasing planting density resulted in increased above- and belowground loblolly Nc; however, increases in Nc were not proportional with increases in planting density. Net primary productivity and N uptake were linearly related, but age/development strongly controlled N use efficiency. Our study helps to understand complex relationships between N, biomass, and silvicultural practices during early stand development and demonstrates that temporal evaluation of nutrient dynamics is crucial to better understand loblolly pine growth, carbon sequestration potential, and to inform sustainable silvicultural practices across short rotations.

54 ENVIRONMENTAL SCIENCES↗