SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
We describe preliminary comparisons of AIRS/AMU/HSB retrieved geophysical products with correlative data sets to constrain retrieval uncertainties. The results are relevant to oceans at latitudes from 40S to 40N where infrared retrievals are completed, or about 70% of retrieval footprints.
The OMPS Limb Profiler (LP) instrument is de-signed to provide high-vertical-resolution ozone and aerosol profiles from measurements of the scattered solar radiation in the 290–1000 nm spectral range. It collected its first Earth limb measurement on 10 January 2012 and continues to provide daily global measurements of ozone and aerosol profiles from the cloud top up to 60 and 40 km, respectively. The relatively high vertical and spatial sampling allow detection and tracking of sporadic events when aerosol particles are injected into the stratosphere, such as volcanic eruptions or pyro cumulonimbus (PyroCb) events. In this paper we discuss the newly released Version 2.0 OMPS multi-wavelength aerosol extinction coefficient retrieval algorithm. The algorithm now produces aerosol extinction profiles at 510, 600, 674, 745, 869 and 997 nm wavelengths. The OMPS LP Version 2.0 data products are compared to the SAGE III/ISS, OSIRIS and CALIPSO missions and shown to be of good quality and suitable for scientific studies. The comparison shows significant improvements in the OMPS LP retrieval performance in the Southern Hemisphere (SH) and at lower altitudes. These improvements arise from use of the longer wavelengths, in contrast with the V1.0 and V1.5 OMPS aerosol retrieval algorithms, which used radiances only at 675 nm and therefore had limited sensitivity in those regions. In particular, the extinction coefficients at 745, 869 and 997 nm are shown to be the most accurate, with relative accuracies and precisions close to 10% and 15%, respectively, while the 675 nm relative accuracy and precision are on the order of 20%. The 510 nm extinction coefficient is shown to have limited accuracy in the SH and is only recommended for use between 20–24 km and only in the Northern Hemisphere. The V2.0 retrieval algorithm has been applied to the complete set of OMPS LP measurements, and the new dataset is publicly available.
This paper introduces a synthetic polarimetric radar simulator and retrieval package, POLArimetric Radar Retrieval and Instrument Simulator (POLARRIS), for evaluating cloud‐resolving models (CRMs). POLARRIS is composed of forward (POLARRIS‐f) and inverse (retrieval and diagnostic) components (iPOLARRIS) to generate not only polarimetric radar observables (Zh, Zdr, Kdp, ρhv) but also radar‐consistent geophysical parameters such as hydrometeor identification, vertical velocity, and rainfall rates retrieved from CRM data. To demonstrate its application and uncertainties, POLARRIS is applied to simulations of a mesoscale convective system over the Southern Great Plains on 23 May 2011, using the Weather Research and Forecasting model with both spectral bin microphysics (SBM) and the Goddard single‐moment bulk 4ICE microphysics. Statistical composites reveal a significant dependence of simulated polarimetric observables (Zdr, Kdp) on the assumptions of the particle axis ratio (oblateness) and orientation angle distributions. The simulated polarimetric variables differ considerably between the SBM and 4ICE microphysics in part due to the differences in their ice particle size distributions as revealed by comparisons with aircraft measurements. Regardless of these uncertainties, simulated hydrometeor identification distributions overestimate graupel and hail fractions, especially from the simulation with SBM. To minimize uncertainties in forward model, the particle shape and orientation angle distributions of frozen particles should be predicted in a microphysics scheme in addition to the size distributions and particle densities.
Atmospheres of a number of ultra-hot Jupiters (UHJs) with temperatures gsim2000 K have been observed recently. Many of these planets show largely featureless thermal spectra in the near-infrared observed with the HST WFC3 spectrograph (1.1–1.7 μm) even though this spectral range contains strong H2O opacity. Recent works have proposed the possibility of H- opacity masking the H2O feature and/or thermal dissociation of H2O causing its apparent depletion at the high temperatures of UHJs. In this work, we test these hypotheses using observations of the exoplanet WASP-18b as a case study. We report detailed atmospheric retrievals of the planet using the HyDRA retrieval code, extended to include the effects of H- opacity and thermal dissociation. We report constraints on the H2O, CO, and H- abundances as well as the pressure–temperature profile of the dayside atmosphere for retrievals with and without H-/dissociation for each data set. We find that the H2O and H- abundances are relatively unconstrained given the featureless WFC3 spectra. We do not conclusively detect H- in the planet, contrary to previous studies that used equilibrium models to infer its presence. The constraint on the CO abundance depends on the combination of WFC3 and Spitzer data, ranging from solar to super-solar CO values. We additionally see signs of a thermal inversion from two of the data sets. Our study demonstrates the potential of atmospheric retrievals of UHJs, including the effects of H- and thermal dissociation of molecules.
Solar-induced fluorescence (SIF) data from satellites are increasingly used as a proxy for photosynthetic activity by vegetation, and as a constraint on gross primary production. Here we report on improvements in the algorithm to retrieve mid-morning (09:30 hrs local time) SIF estimates on the global scale from GOME-2 sensor on the Metop-A satellite (GOME-2A) for the period 2007-2019. Our new SIFTER (Sun-Induced Fluorescence of Terrestrial Ecosystems Retrieval) v2 algorithm improves over a previous version by using a narrower spectral window that avoids strong oxygen absorption and is less sensitive to water vapour absorption, by constructing stable reference spectra from a 6-year period (2007-2012) of atmospheric spectra over the Sahara, and by applying a latitude-dependent zero-level adjustment that accounts for biases in the data product. We generated stable, good-quality SIF retrievals between January 2007 and June 2013, when GOME-2A degradation in the near infrared was still limited. After the narrowing of the GOME-2A swath in July 2013, we characterized the throughput degradation of the level-1 data in order to derive reflectance corrections and apply these for the SIF retrievals between July 2013 and December 2018. SIFTER v2 data compares well with the independent NASA v2.8 data product. Especially in the evergreen tropics, SIFTER v2 no longer shows the underestimates against other satellite products that were seen in SIFTER v1. The new data product includes uncertainty estimates for individual observations, and is best used for mostly clear-sky scenes, and when spectral residuals remain below a certain spectral autocorrelation threshold. Our results support the use of SIFTER v2 data to be used as an independent constraint on photosynthetic activity on regional to global scales.
NASA's Ice, Cloud, and land Elevation Satellite-2 (ICESat-2) laser altimeter launched in Fall 2018, providing an invaluable addition to the polar altimetry record generated by ESA's CryoSat-2 radar altimeter. The simultaneous operation of these two satellite altimeters enables unique comparison studies of sea ice altimetry, utilizing the different frequencies and profiling strategies of the two instruments. Here, we use freeboard data from ICESat-2 to assess Antarctic snow freeboard retrievals from CryoSat-2. We first discuss updates made to a previously published CryoSat-2 retrieval process and show how this Version 2 algorithm improves upon the original method by comparing the new retrievals to ICESat-2 in specific along-track profiles as well as on the basin-scale. In two near-coincident along-track profiles, we find mean snow freeboard differences (standard deviations of differences) of 0.3 (9.3) and 7.6 cm (9.6 cm) with 25 km binned correlation coefficients of 0.77 and 0.89. Monthly mean freeboard differences range between −2.9 (10.8) and 6.6 cm (16.8 cm) basin wide, with the largest differences typically occurring in Austral fall months that is hypothesized to be related to new ice growth and the use of static snow backscatter coefficients in the retrieval. Monthly mean correlation coefficients range between 0.57 and 0.80. While coincident data show good agreement between the two sensors, they highlight issues related to geometric and frequency sampling differences that can impact the freeboard distributions.
Managing and referencing design knowledge is a critical activity in the design process. However, reliably retrieving useful knowledge can be a frustrating experience for users of knowledge management systems due to inherent limitations of standard keyword-based searches. In this research, we consider the task of retrieving relevant lessons learned from the NASA Lessons Learned Information System (LLIS). To this end, we apply a state-of-the-art natural language processing (NLP) technique for information retrieval (IR): semantic search with sentence-BERT, which is a modification of a Bidirectional Encoder Representations from Transformers (BERT) model that uses siamese and triplet network architectures to obtain semantically meaningful sentence embeddings. While the pre-trained sBERT model performs well out-of-the-box, we further fine-tune the model on data from the LLIS so that it learns on design engineering-relevant vocabulary. We quantify the improvement in query results using both standard sBERT and fine-tuned sBERT over a keyword search. Our use case throughout the paper is to use queries related to specific requirements from a NASA project. Fine tuning the sBERT model on LLIS data yields a mean average precision (MAP) of 0.807 on queries based on information needs from a real NASA project. Results indicate that applying state-of-the-art natural language processing techniques, especially when finetuned using engineering data, to design information retrieval tasks shows significant promise in modernizing design knowledge management systems.
Uncertainties in the retrieval of the remote sensing reflectance, R_rs, from Ocean Color (OC) satellite sensors have a strong impact on the performance of algorithms for the estimation of chlorophyll-a, mineral concentrations, and inherent optical properties (IOPs). The uncertainties are highest in the blue bands. The total radiance measured at the top of the atmosphere captures the instantaneous state of the atmosphere-ocean system: the in-water conditions, sky and Sun glint reflected from the wind-roughened ocean surface, as well as light scattered from molecules and aerosols in the atmosphere. Each of these components has associated uncertainties, and when combined with the additional uncertainties from the instrument noise and the atmospheric correction process, they contribute to the total uncertainty budget for the retrieved R_rs. We analyzed the contribution of each component uncertainties to the total R_rs uncertainties in SNPP-VIIRS level 2 products, taking advantage of the spectral differences between the components. We examined multiple scenes in the open ocean and coastal waters at spatial resolutions ranging from 2250 to 5250 m by comparing the retrieved R_rs to in situ measurements made at several AERONET-OC sites and at the MOBY site. It was shown that uncertainties associated with the molecular (Rayleigh) scattering play the most significant role, while the contributions of other components are usually smaller. Uncertainties in Rayleigh scattering are primarily attributed to the variability of Rayleigh optical thickness (ROT) with a standard deviation of approximately 1.5% of ROT, which can largely explain the frequency of negative R_rs retrievals as observed using the current standard atmospheric correction process employed by NASA. Variability of the sky light reflected from the ocean surface in some conditions also contributed to uncertainties in the blue; water variability proportional to R_rs had a very pronounced peak in the green at coastal sites.
Single Field-of-view Sounder Atmospheric Products (SiFSAP) from Cross-track Infrared Sounder (CrIS) on S-NPP have been developed at NASA Langley Research center, and recently a significant improvement in its trace gases products has been made. These products are derived based on the Principal Component (PC)-based Radiative Transfer Model (PCRTM) and an optimal estimation retrieval method (PCRTM-RA). Use of the PCRTM in this method allows for fast and accurate calculations for thousands of spectral channels under clear and cloudy sky conditions. The use of principal component to compress information from all spectral channels into the PC domain enables to reduce the observational noise and use the information from all hyperspectral infrared channels. The retrieval is made on PC-domain, and temperature, water vapor, trace gases, cloud and surface parameters are retrieved simultaneously. This presentation will present some validation to the SiFSAP ozone (O3) and carbon monoxide (CO) products. Since the SiFSAP has a spatial resolution of about 14 km at nadir, which is better than most global weather and climate models and enables to make process-oriented analysis of the transport of these gases, this study will focus on validation of CO and O3 products under some extreme weather and/or climate events, such as CO emission and transport from large biomass burning, and O3 variation impacted by fire emission, stratospheric intrusion, and tropical cyclones. Data used in our validation include CO and O3 from NASA aircraft campaigns, plus other satellite products such as CO and O3 from AIRS, IASI and TROPOMI, MOPPIT CO and OMPS O3. Some comparison of SiFSAP O3 with the O3 from the fifth-generation ECMWF reanalysis (ERA5) data the NASA Modern-Era Retrospective Analysis for Research and Applications, Version 2 (MERRA-2) will also present. Such a validation not only helps to quantify the performance of the retrievals in these extreme conditions, but also displays the capability of satellite observation to capture the fine-scale spatial pattern of CO and O3 variation.
In this work, we aim to developartificial neural network(ANN)techniquesto reproduce the retrieval results ofphysical quantities from spacecraft observations of solar system bodiesusing radiative transfer methods. The particular application here is the retrieval of dust optical depth, water-ice optical depth, and surface temperatureonMarsusingdaytime observationsobtained by the Thermal Emission Spectrometer (TES) onboard the Mars Global Surveyor.Compared against the results obtained from traditional radiative transfer retrieval techniques, our ANN successfully recoveredthe three quantitiesusingdaytime observations. The principal advantage of thesemachine learning(ML) algorithms istheir complete automation and highthroughput. Therefore, the algorithms presented here would be useful for very large datasets andwould make practical the sampling of many different approximations or boundary conditions related to a given observation dataset and retrieval problem.
Rainfall-induced landsliding is a global and systemic hazard that is likely to increase with the projections of increased frequency of extreme precipitation with current climate change. However, our ability to understand and mitigate landslide risk is strongly limited by the availability of relevant rainfall measurements in many landslide prone areas. In the last decade, global satellite multisensor precipitation products (SMPP) have been proposed as a solution, but very few studies have assessed their ability to adequately characterize rainfall events triggering landsliding. Here, we address this issue by testing the rainfall pattern retrieved by two SMPPs (IMERG and GSMaP) and one hybrid product [Multi-Source Weighted-Ensemble Precipitation (MSWEP)] against a large, global database of 20 comprehensive landslide inventories associated with well-identified storm events. We found that, after converting total rainfall amounts to an anomaly relative to the 10-yr return rainfall R*, the three products do retrieve the largest anomaly (of the last 20 years) during the major landslide event for many cases. However, the degree of spatial collocation of R* and landsliding varies from case to case and across products, and we often retrieved R* > 1 in years without reported landsliding. In addition, the few (four) landslide events caused by short and localized storms are most often undetected. We also show that, in at least five cases, the SMPP’s spatial pattern of rainfall anomaly matches landsliding less well than does ground-based radar rainfall pattern or lightning maps, underlining the limited accuracy of the SMPPs. We conclude on some potential avenues to improve SMPPs’ retrieval and their relation to landsliding.
This paper describes the initial results of precipitation estimates from the Time-Resolved Observations of Precipitation structure and storm Intensity with a Constellation of Smallsats (TROPICS) Millimeter-wave Sounder (TMS) using the Precipitation Retrieval and Profiling Scheme (PRPS). The TROPICS mission consists of a Pathfinder cubesat and a constellation of six cubesats, providing a low-cost solution to the frequent sampling of precipitation systems across the Tropics. The TMS instrument is a 12-channel cross-track scanning radiometer operating at frequencies from 91.655 to 204.8 GHz, providing similar resolutions to current passive microwave sounding instruments. These retrievals showcases the potential of the TMS instrument for precipitation retrievals. The PRPS has been modified for use with the TMS using a database based upon observations from current sounding sensors. The results shown here represent the initial post-launch version of the retrieval scheme, as analyzed for the Pathfinder cubesat launched on June 30, 2021. In terms of monthly precipitation estimates the results fall within the mission specifications and are similar in performance t
We are constraining concentrations and emissions for all criteria pollutants (CO, O3, NO2, SO2, PM10, and PM2.5) with WRF-Chem/DART in applications for FRAPPE (15-km grid) and COLORADO (4-km grid). Our results show that: (i) dynamic emissions estimation at medium resolutions (15 km) improves forecast skill; (ii) At high resolutions, the results look good, but we do not have validation data; (iii) for what may be the first time, we assimilate O3 retrieval profiles in a regional model. The problem is that the averaging kernels generally extend above the upper boundary of regional models. We use O3 upper boundary conditions from the global model to solve that problem; and (iv) In the high resolution experiments, we document the potential benefits of assimilating TEMPO O3 profile and NO2 tropospheric column retrievals. Here, we assimilate proxy TEMPO retrievals from a GEOS-Chem nature run, so there’s a conceptual problem due to the potential bias of the proxy retrievals, but the point is to demonstrate our ability to assimilate TEMPO and identify its potential impacts.
The retrieval algorithms used for optical remote sensing satellite data to estimate Earth's geophysical properties have specific requirements for spatial resolution, temporal revisit, spectral range and resolution, and instrument signal-to-noise ratio (SNR) performance to meet biogeoscience objectives. Studies to estimate surface properties from hyperspectral data use a range of algorithms sensitive to various sources of spectroscopic uncertainty, which are in turn influenced by mission architecture choices. Retrieval algorithms vary across scientific fields and may be more or less sensitive to mission architecture choices that affect spectral, spatial, or temporal resolutions and spectrometer SNR. We used representative remote sensing algorithms across terrestrial and aquatic study domains to inform aspects of mission design that are most important for impacting accuracy in each scientific area. We simulated the propagation of uncertainties in the retrieval process including the effects of different instrument configuration choices. We found that retrieval accuracy and information content degrade consistently at >10 nm spectral resolution, >30 m spatial resolution, and >8-day revisit. In these studies, the noise reduction associated with lower spatial resolution improved accuracy vis à vis high spatial resolution measurements. The interplay between spatial resolution, temporal revisit, and SNR can be quantitatively assessed for imaging spectroscopy missions and used to identify key components of algorithm performance and mission observing criteria.
GJ 229B was the first T dwarf to be discovered in 1995, and its spectrum has been more thoroughly observed than that of most other brown dwarfs. Yet a full spectroscopic analysis of its atmosphere has not been done with modern techniques. This spectrum has several peculiar features, and recent dynamical estimates of GJ 229B’s mass and orbit have disagreed widely, both of which warrant closer investigation. With a separation of tens of astronomical units from its host star, GJ 229B falls near the border of the planet and stellar population formation regimes, so its atmosphere could provide clues to formation processes for intermediate objects of this type. In an effort to resolve these questions, we performed retrievals on published spectra of GJ 229B over a wide range of wavelengths (0.5–5.1 μm) using the open-source APOLLO code. Based on these retrievals, we present a more precise mass estimate of 41.6 ± 3.3MJ and an effective temperature estimate of 869 +5 −7 K, which are more consistent with evolutionary models for brown dwarfs and suggest an older age for the system of >1.0 Gyr. We also present retrieved molecular abundances for the atmosphere, including replicating the previously observed high CO abundance, and discuss their implications for the formation and evolution of this object. This retrieval effort will give us insight into how to study other brown dwarfs and directly imaged planets, including those observed with JWST and other next-generation telescopes.
NASA’s Plankton, Aerosol, Cloud, ocean Ecosystem (PACE) mission will launch in January 2024 and continue and improve upon satellite data records in its eponymous domains. PACE will carry a broad-swath hyperspectral imager, OCI, which will provide MODIS/VIIRS-type cloud data products (i.e. a cloud mask, top height, visible optical thickness, droplet effective radius, phase, and derived water path). It will also carry two multi-angle polarimeters (HARP2 and SPEXone) which will not only provide the above but also enable retrievals of additional cloud properties (e.g. droplet effective variance, ice crystal asymmetry parameter). Validating satellite-based cloud retrievals is challenging. We plan to use several ARM data streams to evaluate PACE cloud data products and are prototyping our analyses using retrievals from MODIS on the Aqua satellite and OLCI on the Sentinel-3A satellite. This poster shows how we plan to use ARM data to evaluate liquid water path (via MWRRET) and cloud top height retrievals (via KARZASRCL), with example results from these proxy sensors and ARM data from the SGP, ENA, and NSA sites. We seek comments from and collaborations with the ARM community to get the most out of our respective data streams.
The global carbon cycle is experiencing continued perturbations via increases in atmospheric carbon concentrations, which are partly reduced by terrestrial biosphere and ocean carbon uptake. Greenhouse gas satellites have been shown to be useful in retrieving atmospheric carbon concentrations and observing surface and atmospheric CO2 seasonal-to-interannual variations. However, limited attention has been placed on using satellite column CO2 retrievals to evaluate surface CO2 fluxes from the terrestrial biosphere without advanced inversion models at low latency. Such applications could be useful to monitor, in near real time, biosphere carbon fluxes during climatic anomalies like drought, heatwaves, and floods, before more complex terrestrial biosphere model outputs and/or advanced inversion modelling estimates become available. Here, we explore the ability of Orbiting Carbon Observatory-2 (OCO-2) column-averaged dry air CO2 (XCO2) retrievals to directly detect and estimate terrestrial biosphere CO2 flux anomalies using a simple mass-balance approach. An initial global analysis of surface–atmospheric CO2 coupling and transport conditions reveals that the western US, among a handful of other regions, is a feasible candidate for using XCO2 for detecting terrestrial biosphere CO2 flux anomalies. Using the CarbonTracker model reanalysis as a test bed, we first demonstrate that a well-established mass-balance approach can estimate monthly surface CO2 flux anomalies from XCO2 enhancements in the western United States. The method is optimal when the study domain is spatially extensive enough to account for atmospheric mixing and has favorable advection conditions with contributions primarily from one background region. We find that errors in individual soundings reduce the ability of OCO-2 XCO2 to estimate more frequent, smaller surface CO2 flux anomalies. However, we find that OCO-2 XCO2 can often detect and estimate large surface flux anomalies that leave an imprint on the atmospheric CO2 concentration anomalies beyond the retrieval error/uncertainty associated with the observations. OCO-2 can thus be useful for low-latency monitoring of the monthly timing and magnitude of extreme regional terrestrial biosphere carbon anomalies.
The OMPS Limb Profiler (OMPS LP) satellite instrument, launched in October 2011, performs limb measurements of scattered solar radiation in the ultraviolet and visible wavelengths, which allow for the retrieval of ozone profiles from the top of clouds up to 55km. In this study we utilize ozone retrievals from two solar occultation satellite instruments, SAGE III/ISS and ACE-FTS, to validate OMPS LP profile measurements processed with the new NASA GSFC version 2.6 retrieval algorithm. OMPS LP started operational observations in April 2012, whereas ACE-FTS observations started in February 2004, therefore, there are currently 12 years of data overlap to exploit for validation. SAGE III/ISS observations started in June 2017, which provides 7 years of data overlap with OMPS LP. The OMPS LP is a solar scattering instrument that makes observations in the sunlit portion of the Earth, whilst ACE-FTS and SAGE III/ISS are solar occultation instruments that measure ozone only at sunrise and sunset. To account for these differences in measurement times we use the Goddard Diurnal Ozone Climatology (GDOC). Diurnal adjustments using this climatology have been shown to help reduce biases above 30 km. Our analysis shows that biases between OMPS LP v2.6, ACE-FTS, and SAGE III/ISS are <10% between 18 and 45 km, and increase above and below these altitudes, which are comparable to the previous version of OMPS LP ozone retrievals (v2.5). The vertical patterns of the differences are similar across different latitudes and seasons, with larger seasonal variations observed in the Northern Hemisphere.