Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “regolith”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Microwave emission spectrum of the moon - Mean global heat flow and average depth of the regolith

Earth-based observations of the lunar microwave brightness temperature spectrum at wavelengths between 5 and 500 centimeters, when reexamined in the light of physical property data derived from the Apollo program, tentatively support the high heat flows measured in situ and indicate that a regolith thickness between 10 and 30 meters may characterize a large portion of the lunar near side.

Keihm, S. J.↗

Regolith compositions from the Apollo 17 mission

An investigation of the chemical, mineralogical, and petrographic data from six Apollo 17 regolith samples is summarized. The samples from the center of the Taurus-Littrow valley are very similar in composition and consist of mare basalt and a minor admixture (about 25%) of plagioclase-rich material. The material from Station 9 (Van Serg Crater) contains much less basalt and more breccia and are higher in Al2O3 and lower in TiO2 and FeO than the other mare sites. The chemical compositions of the samples from the North Massif, the South Massif, and the light mantle believed to be of landslide origin, are very similar and correspond to an olivine norite; the relatively high K2O and P2O5 content indicate the presence of a KREEP component. Additional results are described in detail.

Mason, B.↗

Regolith history from cosmic-ray-produced nuclides

A model is given for regolith development by which the meteoroid impact parameters (time of last major impact, soil escape rate, and soil turnover depths) are determined from the Gd isotope data for the Apollo 15 and 16 drill stems. The time of the last major impact, cosmic-ray-produced-nuclide-clock reset time, at the Apollo 15 site is 0.6-1.3 aeon. The reset time at the Apollo 16 site is between 1.54 plus or minus 0.14 and 3.3-4.0 aeon. The average soil escape rate from the moon corresponding to the 1.54 plus or minus 0.14 aeon reset time is between 70 and 110 cm/aeon and corresponding to the 3.3 and 4.0 aeon reset time is between 36 and 56 cm/aeon. The soil turnover depth for the 1.54 plus or minus 0.14 aeon reset time is 250 cm and for the 3.3-4.0 aeon reset time is 750 cm. The Gd data restrict the change with time of the meteoroid flux during the past 1.4 aeon.

Fireman, E. L.↗

Magnetic properties of Apollo samples and implications for regolith formation

The magnetic properties of a number of Apollo 17 samples have been measured and confirm that regoliths of mare sites (Apollo 11, 12, 15 valley, and 17 valley) differ markedly from those of highland sites (Apollo 14, 16, and 17 massif) in the ratio of content of metallic to ferrous iron and in the grain size of metallic iron. The ratio of metallic to ferrous iron is correlated with mean particle size, a parameter representing maturity, for soils of Apollo 16 and roughly correlated with the age of the sites for soils of different sites. It is suggested that the ratio of metallic to ferrous iron may be an effective indicator of relative soil maturity for any one site and of the age of the soil material for any sites.

Pearce, G. W.↗

Stratification in the lunar regolith - A preliminary view

Although our knowledge of lunar regolith stratification is incomplete, several categories of thick and thin strata have been identified. Relatively thick units average 2 to 3 cm in thickness, and appear surficially to be massive. On more detailed examination, these units can be uniformly fine-grained, can show internal trends, or can show internal variations which apparently are random. Other thick units contain soil clasts apparently reworked from underlying units. Thin laminae average approximately 1 mm in thickness; lenticular distribution and composition of some thin laminae indicates that they are fillets shed from adjacent rock fragments. Other dark fine-grained well-sorted thin laminae appear to be surficial zones reworked by micrometeorites. Interpretations of stratigraphic succession can be strengthened by the occurrence of characteristic coarse rock fragments and the orientation of large spatter agglutinates, which are commonly found in their original depositional orientation.

Duke, M. B.↗

A Monte Carlo model for the gardening of the lunar regolith

The processes of movement and turnover of the lunar regolith are described by a Monte Carlo model. The movement of material by the direct cratering process is the dominant mode, but slumping is also included for angles exceeding the static angle of repose. Using a group of interrelated computer programs, a large number of properties are calculated, including topography, formation of layers, depth of the disturbed layer, nuclear-track distributions, and cosmogenic nuclides. In the most complex program, the history of a 36-point square array is followed for times up to 400 million years. The histories generated are complex and exhibit great variety. Because a crater covers much less area than its ejecta blanket, there is a tendency for the height change at a test point to exhibit periods of slow accumulation followed by sudden excavation. In general, the agreement with experiment and observation seems good, but two areas of disagreement stand out. First, the calculated surface is rougher than that observed. Second, the observed bombardment ages, of the order 400 million are shorter than expected (by perhaps a factor of 5).

Arnold, J. R.↗

Apollo 17 neutron stratigraphy - Sedimentation and mixing in the lunar regolith

A report is presented concerning the Gd isotopic ratios in ten samples, representing nearly the entire depth of the drill stem which was recovered during the Apollo 17 mission. The lunar neutron energy spectrum is discussed along with questions regarding neutron fluence and neutron flux. The significance of the Apollo 17 deep drill stem is considered and attention is given to the statistical nature of the fluence in the lunar regolith. Vertical mixing models are also described.

Curtis, D. B.↗

Distribution, movement, and evolution of the volatile elements in the lunar regolith

The abundances and distributions of carbon, nitrogen, and sulfur in lunar soils are reviewed. Carbon and nitrogen have a predominantly extra-lunar origin in lunar soils and breccias, while sulfur is mostly indigeneous to the moon. The lunar processes which effect the movement, distribution, and evolution of carbon, nitrogen, and sulfur, along with the volatile alkali elements sodium, potassium, and rubidium during regolith processes are discussed. Possible mechanisms which may result in the addition to or loss from the moon of these volatile elements are considered.

Gibson, E. K., Jr.↗

Chemical fractionation of the lunar regolith by impact melting

Impact-produced agglutinitic glass in both lunar highland and mare soils is enriched in mafic elements, in potassium, phosphorus, and sulfur, and in most lithophile elements, whereas it is depleted in plagioclase components including europium. It is proposed that the chemical fractionation is the result of a multistage partial-melting mechanism that accompanies micrometeoroid impacts into soils. The process would be expected to occur on solar system bodies that have an impact-produced regolith.

Adams, J. B.↗

Solar wind and micrometeorite effects in the lunar regolith

Using available data from the literature, an outline is formulated for the major physical and chemical effects expected during solar-wind bombardment of the lunar regolith. In agreement with results of Auger and other analyses of the composition of lunar grain surfaces, this outline predicts that solar-wind sputtering will tend to clean exposed grain surfaces by ejecting material at velocities exceeding lunar escape velocity. Results are also discussed which show that Fe is partially reduced in the outer few 10 nm of grain surfaces and that this reduced Fe forms 10-nm-diameter metal spheres throughout the glass during agglutinate formation by micrometeorite impacts. These metal spheres give the agglutinates their distinctive optical and magnetic properties and are partially responsible for the decreasing albedo of the lunar surface with exposure age.

Housley, R. M.↗

Microstratigraphy of the lunar regolith and compaction ages of lunar breccias

Fossil track analyses of impregnated core sections from the Apollo 15 and 16 deep drill cores were used to study two types of distinct layers of about 1 mm and about several mm thick in the lunar regolith. The data supports a mixing model hypothesis for the origin of the sampled soil column dominated by large, fresh feldspar fragments. The boundary track method and the track gradient method were used to study the compaction ages of lunar breccias.

Goswami, J. N.↗

A Monte-Carlo simulation of galactic cosmic ray effects in the lunar regolith

A Monte-Carlo soil mixing computer code was used to evaluate isotopic effects induced by galactic cosmic rays in samples on the top surface of the lunar regolith and in lunar core tubes. For surface samples, good agreement was found between theoretical predictions of Ne-21 concentrations, neutron fluences, and Xe-131/Xe-126 ratios, and the corresponding observations.

Langevin, Y.↗

Thermal movement of the regolith

High-frequency seismic events observed at the Apollo landing sites indicate that the regolith moves in response to diurnal variations of thermal stresses. While these events (thermal moonquakes) are observed by each of the Passive Seismic Experiment stations, the location of their sources was not possible until they were observed by the Lunar Surface Profiling Experiment (LSPE) array at the Apollo 17 site. Comparison of source locations with topographic features near the LSPE array indicate that thermal moonquakes are associated to some degree with large rocks and to a larger degree with craters. They are not associated with man-made disturbances of the lunar surface. It is suggested that thermal moonquakes are the seismic expression of a phenomenon that is actively degrading slopes on the lunar surface.

Duennebier, F.↗

Mossbauer spectroscopy of iron in the Luna 20 regolith

Results of the Mossbauer effect measurements on Fe-57 in the average sample of the Luna 20 regolith, and their comparison with similar measurements of the Luna 16 samples are presented. Room temperature measurements of the nonmagnetic as well as magnetic components of the spectra were performed. By careful least-squares analysis, six quadrupole doublets in the inner parts of spectra were resolved. According to their splittings, they were interpreted as four types of iron in silicates (olivine, two inequivalent pyroxene sites, and a glassy fraction) and two types of nonmagnetic iron-titanium oxides (ilmenite and a spinel). Velocity-window measurements, were used to determine the average nickel content of (2.01 plus or minus 0.84) wt. %. These results are discussed in terms of distribution of iron among different phases. In comparison with the Luna 16 sample, the Luna 20 sample contains more olivine and less ilmenite as well as metal with a slightly higher nickel content.

Zemcik, T.↗

Asteroid collisions, craters, regoliths, and lifetimes

Laboratory experiments and computer modeling are used to predict the development of regoliths on all asteroids more than a few tens of kilometers in diameter, allowing for a wide range in the intrinsic strength of asteroidal surface materials. The high frequency of interasteroid collisions requires nearly all asteroids to be fragments of precursors.

Chapman, C. R.↗

Irradiation history of lunar cores and the development of the regolith

Detailed studies by the nuclear particle track method of lunar core sections 70009, 70008, 60007, 60010, and 60009 indicate that the irradiation and depositional histories of individual lunar cores vary greatly. The presence of layers a few cm thick which have remained largely undisturbed for periods ranging from 1 to 100 m.y. is a common feature although the development of the regolith usually proceeds through the accumulation of smaller increments of heavily irradiated material that do not result in distinct layers. Typical accumulation rates are on the order of 1 cm/m.y.

Crozaz, G.↗

Lunar regolith dynamics based on analysis of the cosmogenic radionuclides Na-22, Al-26, and Mn-53

Depth profiles of Na-22 and Al-26 in the upper portions of five lunar cores are analyzed. From the analyses, it is concluded that the natural gardening processes on the lunar surface result in mixing of the regolith to a depth of 2-3 cm over a time period which is short compared with the half-life of Al-26 (0.73 m.y.). It is also concluded that the rotary drill processes which were used to obtain the deep drill samples generally resulted in loss and/or mixing of the upper portions of the cores. In contrast, the near-surface regions of the drive tube cores appear to have a well-preserved stratigraphy. Analysis of Mn-53 in samples of six lunar rocks helps substantiate the accuracy of age date estimates by other means, and provides definite information that the total lunar surface exposure of two of these rocks has occurred during a single surface event which continued to their collection.

Fruchter, J. S.↗

Evidence for meteoritic sulfur in the lunar regolith

Abundance and isotopic data are presented for a suite of 19 soils from the Apollo 16 mission. It is concluded that the S systematics of the lunar regolith support a model in which S from a number of indigenous rock types is mixed with a time-dependent, extralunar component of probably meteoritic origin. This mixture is processed on the lunar surface by a time-dependent mechanism which removes S-32 enriched S from the moon, enriching the residue in S-34. The loss of S by this mechanism approximately equals the meteoritic input, producing the apparent coincidence between rock abundances and abundances in soils which has led to adoption of simplified mixing models. In reality, at least for the Apollo 16 site, addition of meteoritic S slightly outweighs loss from the moon, resulting in a positive trend.

Kerridge, J. F.↗