Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “prediction methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Light transport and general aviation aircraft icing research requirements

A short term and a long term icing research and technology program plan was drafted for NASA LeRC based on 33 separate research items. The specific items listed resulted from a comprehensive literature search, organized and assisted by a computer management file and an industry/Government agency survey. Assessment of the current facilities and icing technology was accomplished by presenting summaries of ice sensitive components and protection methods; and assessments of penalty evaluation, the experimental data base, ice accretion prediction methods, research facilities, new protection methods, ice protection requirements, and icing instrumentation. The intent of the research plan was to determine what icing research NASA LeRC must do or sponsor to ultimately provide for increased utilization and safety of light transport and general aviation aircraft.

Breeze, R. K.↗
NASA NTRS1984

Broadband rotor noise analyses

The various mechanisms which generate broadband noise on a range of rotors studied include load fluctuations due to inflow turbulence, due to turbulent boundary layers passing the blades' trailing edges, and due to tip vortex formation. Existing analyses are used and extensions to them are developed to make more accurate predictions of rotor noise spectra and to determine which mechanisms are important in which circumstances. Calculations based on the various prediction methods in existing experiments were compared. The present analyses are adequate to predict the spectra from a wide variety of experiments on fans, full scale and model scale helicopter rotors, wind turbines, and propellers to within about 5 to 10 dB. Better knowledge of the inflow turbulence improves the accuracy of the predictions. Results indicate that inflow turbulence noise depends strongly on ambient conditions and dominates at low frequencies. Trailing edge noise and tip vortex noise are important at higher frequencies if inflow turbulence is weak. Boundary layer trailing edge noise, important, for large sized rotors, increases slowly with angle of attack but not as rapidly as tip vortex noise.

George, A. R.↗
NASA NTRS1986

Wall layer models for the calculation of velocity and heat transfer in turbulent boundary layers

In the computation of turbulent boundary-layer flows and internal flows, a substantial amount of mesh points and computational effort is required to adequately resolve the intense temperature and velocity profile variations in the near wall region. In this study, analytical profile approximations are obtained for the mean velocity and temperature distribution in the wall layer; these profiles are based upon consideration of the observed coherent structure of the time-dependent wall-layer flow. The profile approximations are relatively simple analytical formulae which satisfy all the required compatibility conditions at the wall and the logarithmic behavior at the edge of the wall layer. The Reynolds analogy for heat transfer is not used in the present theory. A general method for utilizing the present wall-layer profile models in a prediction method is indicated.

Walker, J. D. A.↗
NASA NTRS2010

Algorithm for Lossless Compression of Calibrated Hyperspectral Imagery

A two-stage predictive method was developed for lossless compression of calibrated hyperspectral imagery. The first prediction stage uses a conventional linear predictor intended to exploit spatial and/or spectral dependencies in the data. The compressor tabulates counts of the past values of the difference between this initial prediction and the actual sample value. To form the ultimate predicted value, in the second stage, these counts are combined with an adaptively updated weight function intended to capture information about data regularities introduced by the calibration process. Finally, prediction residuals are losslessly encoded using adaptive arithmetic coding. Algorithms of this type are commonly tested on a readily available collection of images from the Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) hyperspectral imager. On the standard calibrated AVIRIS hyperspectral images that are most widely used for compression benchmarking, the new compressor provides more than 0.5 bits/sample improvement over the previous best compression results. The algorithm has been implemented in Mathematica. The compression algorithm was demonstrated as beneficial on 12-bit calibrated AVIRIS images.

Kiely, Aaron B.↗
NASA NTRS1990

Some observations on the Houbolt-Rainey and peak-hold methods of flutter onset prediction

A subcritical response method for flutter onset prediction developed by Houbolt and Rainey in 1958 is compared with the Peak-Hold Method which was apparently first applied to flutter onset prediction by Sandford, Abel, and Gray in the early 1970's. The rational argument presented shows that the two methods are not different, but are actually the same. So, because there is an analytical foundation for the Houbolt-Rainey Method, then there is the same analytical foundation for the Peak-Hold Method. Further, it is suggested that, in applying Peak-Hold Method in cases where turbulence is used as the excitation force, the variation of the reciprocal of the response amplitude with the reciprocal of the dynamic pressure to be used to extrapolate to flutter onset rather than the variation with dynamic pressure which is the current practice because the linear trend which is predicted to occur for the former is easier to extrapolate to the flutter condition than the nonlinear trend predicted to occur for the latter.

Doggett, Robert V., Jr.↗
NASA NTRS2003

Analysis and Design of Rotors at Ultra-Low Reynolds Numbers

Design tools have been developed for ultra-low Reynolds number rotors, combining enhanced actuator-ring / blade-element theory with airfoil section data based on two-dimensional Navier-Stokes calculations. This performance prediction method is coupled with an optimizer for both design and analysis applications. Performance predictions from these tools have been compared with three-dimensional Navier Stokes analyses and experimental data for a 2.5 cm diameter rotor with chord Reynolds numbers below 10,000. Comparisons among the analyses and experimental data show reasonable agreement both in the global thrust and power required, but the spanwise distributions of these quantities exhibit significant deviations. The study also reveals that three-dimensional and rotational effects significantly change local airfoil section performance. The magnitude of this issue, unique to this operating regime, may limit the applicability of blade-element type methods for detailed rotor design at ultra-low Reynolds numbers, but these methods are still useful for evaluating concept feasibility and rapidly generating initial designs for further analysis and optimization using more advanced tools.

Kunz, Peter J.↗
NASA NTRSDate not supplied

Experiments to Challenge Jet Noise Prediction

Recent fundamental jet noise tests were conducted with the objective of providing data that challenges jet noise prediction methods. Three cases have been extracted to pose as challenges to the jet noise prediction community. Case 1 targets efforts in LES to appropriately mimic unresolveable turbulent boundary layers in nozzles, and to demonstrate where they are, and are not, important for noise. Case 2 targets acoustic analogy methods, providing cardinal data for the question of azimuthal localization and the broader issue of designing nozzles with favorable azimuthal directivity. Case 3 is an example where nozzle systems exhibit global resonances, which cannot be attacked by steady-state calculations. Given that it is very difficult to foresee such unsteady behavior (speaking from experience), it is crucial that low-cost methods be developed to catch these during the design process. Analysis and documentation of the test data is ongoing.

jet noise↗
NASA NTRS2004

High Speed Research Noise Prediction Code (HSRNOISE) User's and Theoretical Manual

This report describes a computer program, HSRNOISE, that predicts noise levels for a supersonic aircraft powered by mixed flow turbofan engines with rectangular mixer-ejector nozzles. It fully documents the noise prediction algorithms, provides instructions for executing the HSRNOISE code, and provides predicted noise levels for the High Speed Research (HSR) program Technology Concept (TC) aircraft. The component source noise prediction algorithms were developed jointly by Boeing, General Electric Aircraft Engines (GEAE), NASA and Pratt & Whitney during the course of the NASA HSR program. Modern Technologies Corporation developed an alternative mixer ejector jet noise prediction method under contract to GEAE that has also been incorporated into the HSRNOISE prediction code. Algorithms for determining propagation effects and calculating noise metrics were taken from the NASA Aircraft Noise Prediction Program.

Golub, Robert↗
NASA NTRSDate not supplied

Comparisons of Impedance Prediction Models for Perforate-over-Honeycomb Liners

A large dataset is used to evaluate the efficacy of multiple impedance prediction models for perforate-over-honeycomb liners. Two-factorial analysis is used to explore the relative importance of the key parameters used in these models. Tests are conducted in the NASALangley Normal Incidence Tube and Grazing Flow Impedance Tube with over eighty perforate facesheets at multiple source sound pressure levels, Mach numbers and frequencies. Each prediction model is then compared with this dataset to determine how well each method predicts the measured data. Finally, an optimizer is used to further improve the ability of one of these models to reproduce the measured results.

acoustic↗
NASA NTRSDate not supplied

Comparisons of Impedance Prediction Models for Perforate-over-Honeycomb Liners

A large dataset is used to evaluate the efficacy of multiple impedance prediction models for perforate-over-honeycomb liners. Two-factorial analysis is used to explore the relative importance of the key parameters used in these models. Tests are conducted in the NASALangley Normal Incidence Tube and Grazing Flow Impedance Tube with over eighty perforate facesheets at multiple source sound pressure levels, Mach numbers and frequencies. Each prediction model is then compared with this dataset to determine how well each method predicts the measured data. Finally, an optimizer is used to further improve the ability of one of these models to reproduce the measured results.

acoustic↗
NASA NTRS1988

A performance/loss evaluation of SSME HPFTP turbine

An evaluation of component losses of the High Pressure Fuel Turbopump (HPFTP) in the Space Shuttle Main Engine (SSME) is performed using a mean-line prediction method. This is accompanied with an extensive review of loss correlations in the literature. The present prediction uses an existing gas path velocity triangle, real LH2 and H2O gas properties and loss correlations selected from the literature. The significant losses incurred in the HPFTP turbine include profile loss, secondary loss, and tip clearance loss. Results obtained from the present prediction are compared to those calculated from a quasi-three dimensional numerical analysis. Except for the clearance loss, the present loss coefficients are in general higher than their counterparts from the quasi-three dimensional analysis. The fact that the mean-line velocity data being unable to represent actual flow fields near the hub and the tip regions is largely responsible for the uncertainty involved in the present method. On the other hand, due mainly to the ad-hoc nature of the studies involved, the correlations currently available in the literature may not be suitable for accurate loss prediction of the particular rocket turbine in the SSME HPFTP. Further studies particularly in the areas of tip clearance loff, coolant loss, secondary loss, and their interactions are desirable. Fundamental phenomena concerning flow unsteadiness in wake shedding and turbulence are also important.

Chyu, Mingking K.↗
NASA NTRS1973

Investigation of the Jet Noise Prediction Theory and Application Utilizing the PAO Formulation

Application of the Phillips theory to engineering calculations of rocket and high speed jet noise radiation is reported. Presented are a detailed derivation of the theory, the composition of the numerical scheme, and discussions of the practical problems arising in the application of the present noise prediction method. The present method still contains some empirical elements, yet it provides a unified approach in the prediction of sound power, spectrum, and directivity.

Source record↗
NASA NTRS1998

Constitutive Theory Developed for Monolithic Ceramic Materials

With the increasing use of advanced ceramic materials in high-temperature structural applications such as advanced heat engine components, the need arises to accurately predict thermomechanical behavior that is inherently time-dependent and that is hereditary in the sense that the current behavior depends not only on current conditions but also on the material's thermomechanical history. Most current analytical life prediction methods for both subcritical crack growth and creep models use elastic stress fields to predict the time-dependent reliability response of components subjected to elevated service temperatures. Inelastic response at high temperatures has been well documented in the materials science literature for these material systems, but this issue has been ignored by the engineering design community. From a design engineer's perspective, it is imperative to emphasize that accurate predictions of time-dependent reliability demand accurate stress field information. Ceramic materials exhibit different time-dependent behavior in tension and compression. Thus, inelastic deformation models for ceramics must be constructed in a fashion that admits both sensitivity to hydrostatic stress and differing behavior in tension and compression. A number of constitutive theories for materials that exhibit sensitivity to the hydrostatic component of stress have been proposed that characterize deformation using time-independent classical plasticity as a foundation. However, none of these theories allow different behavior in tension and compression. In addition, these theories are somewhat lacking in that they are unable to capture the creep, relaxation, and rate-sensitive phenomena exhibited by ceramic materials at high temperatures. The objective of this effort at the NASA Lewis Research Center has been to formulate a macroscopic continuum theory that captures these time-dependent phenomena. Specifically, the effort has focused on inelastic deformation behavior associated with these service conditions by developing a multiaxial viscoplastic constitutive model that accounts for time-dependent hereditary material deformation (such as creep and stress relaxation) in monolithic structural ceramics. Using continuum principles of engineering mechanics, we derived the complete viscoplastic theory from a scalar dissipative potential function.

Janosik, Lesley A.↗
NASA NTRS1987

Accuracies of southwell and force/stiffness methods in the prediction of buckling strength of hypersonic aircraft wing tubular panels

Accuracies of the Southwell method and the force/stiffness (F/S) method are examined when the methods were used in the prediction of buckling loads of hypersonic aircraft wing tubular panels, based on nondestructive buckling test data. Various factors affecting the accuracies of the two methods were discussed. Effects of load cutoff point in the nondestructive buckling tests on the accuracies of the two methods were discussed in great detail. For the tubular panels under pure compression, the F/S method was found to give more accurate buckling load predictions than the Southwell method, which excessively overpredicts the buckling load. It was found that the Southwell method required a higher load cutoff point, as compared with the F/S method. In using the F/S method for predicting the buckling load of tubular panels under pure compression, the load cutoff point of approximately 50 percent of the critical load could give reasonably accurate predictions.

Ko, William L.↗
NASA NTRS2009

A Simple and Efficient Computational Approach to Chafed Cable Time-Domain Reflectometry Signature Prediction

A method for the prediction of time-domain signatures of chafed coaxial cables is presented. The method is quasi-static in nature, and is thus efficient enough to be included in inference and inversion routines. Unlike previous models proposed, no restriction on the geometry or size of the chafe is required in the present approach. The model is validated and its speed is illustrated via comparison to simulations from a commercial, three-dimensional electromagnetic simulator.

Kowalski, Marc Edward↗
NASA NTRS1990

Analysis and prediction of tilt rotor hover noise

This paper presents new and improved tilt rotor hover noise prediction methods. Calculations include both discrete frequency harmonic noise and broadband noise mechanisms due to the ground plane/fountain recirculating flow. The noise mechanisms studied are thickness, loading, and inflow turbulence noise. In each case aeroacoustic models are developed and compared to noise measurements obtained experimentally for the XV-15 experimental tilt rotor aircraft. Both the effects of the mean and the turbulent fountain flows are found to be important noise sources and have strongly directional radiation patterns toward the rear of the aircraft (the direction of the rotor motion through the fountain flow). Calculations also show that the noise generated by the inflow of ambient atmospheric turbulence can also be an important noise source in hover in some directions. Further development of the methods and models, and precise information about the fountain flow, are needed to improve the predictions and to initiate noise minimization studies.

Coffen, Charles D.↗
NASA NTRS1999

"Novel Techniques in Non-Stationary Analysis of Rotorcraft Vibration Signitures"

This research effort produced new methods to analyze the performance of linear predictors that track non-stationary processes. Specifically, prediction methods have been applied to the vibration pattern of rotorcraft drivetrains. This analysis is part or a larger rotorcraft Health and Usage Monitoring System (HUMS) that can diagnose immediate failures of the subsystems, as indicated by abrupt change in the vibration signature, and prognosticate future health, by examining the vibration patterns against long-term trends. This problem is described by a earlier joint paper co-authored by members of the funding agency and the recipient institutions prior to this grant effort. Specific accomplishments under this grant include the following: (1) Definition of a framework for analysis of non-stationary time-series estimation using the coefficients of an adaptive filter. (2) Description of a novel method of combining short-term predictor error and long-term regression error to analyze the performance of a non-stationary predictor. (3) Formulation of a multi-variate probability density function that quantifies the performance of a adaptive predictor by using the short- and long-term error variables in a Gamma function distribution. and (4) Validation of the mathematical formulations with empirical data from NASA flight tests and simulated data to illustrate the utility beyond the domain of vibrating machinery.

Meng, Teresa↗