Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “power production”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Interaction of heat production, strain rate and stress power in a plastically deforming body under tensile test

At high strain rates the heat produced by plastic deformation can give rise to a rate dependent response even if the material has rate independent constitutive equations. This effect has to be evaluated when interpreting a material test, or else it could erroneously be ascribed to viscosity. A general thermodynamic theory of tensile testing of elastic-plastic materials is given in this paper; it is valid for large strain at finite strain rates. It enables discovery of the parameters governing the thermodynamic strain rate effect, provides a method for proper interpretation of the results of the tests of dynamic plasticity, and suggests a way of planning experiments in order to detect the real contribution of viscosity.

Paglietti, A.↗

Origin of refractive index fluctuations in the mesosphere as opposed to the stratosphere and troposphere

Mesospheric echoes are strongly influenced by the electron density profile of the ionospheric D region. These echoes therefore are only observed during daylight hours or high energy particle precipitation. The turbulence occurs in layers, which often confines the radar echoes to rather thin regions of several 100 m vertical extent, although layers as thick as several kilometers are also observed. Evaluable echoes are not observed through the entire altitude region of the mesosphere for the given power aperture product. The echoes indicate temporal variation.

Rottger, J.↗

Tether power supplies exploiting the characteristics of space

The author presents an alternative approach to the conception and design of future space power systems, with a particular emphasis on the use of tethers in space. Two concepts are presented in support of this design approach. The first concept is a secondary power system for large-scale energy storage and release, and the second is a prime power system for large-scale production of electrical power from the solar flux. In each case basic equations are presented, discussed, and point design values are given as examples. The technology of superconduction is found to be greatly enhancing for the first concept, and the development of very light weight solar reflectors is considered enabling for the second.

Purvis, Christopher↗

Linewidth broadening due to longitudinal spatial hole burning in a long distributed feedback laser

The spectral linewidth of a long distributed feedback (DFB) laser above threshold at high output power is investigated theoretically. Longitudinal spatial hole burning (LSHB) is shown to have important effects on the lasing characteristics and the broadening of linewidth. A four-wave coupled mode equation is developed to describe the LSHB phenomenon. The threshold gain and the carrier distribution are solved self-consistently above threshold at various output powers. The simulation results show that the power-linewidth product can increase by a factor greater than 2 due to LSHB for long DFB lasers. This theory has important implications on the limits of linewidth reduction by increasing the length of DFB lasers and on possible future device design for coherent optical systems.

Wu, Ming-Chiang↗

Cyclops - The JPL AIRSAR synoptic processor

Capability for synoptic, or wide-area, SAR processing has been added to the JPL Aircraft Synthetic Aperture Radar System (AIRSAR) by means of the CYCLOPS synoptic processor. Polarimetric requirements have been relaxed so that a single node in the system can process SAR data with a throughput of three channels in 3.75 hours. Each channel consists of five minutes of full-range-swath data chosen from the twelve available AIRSAR polarization channels. Processed data consists of 16-look, 16-meter resolution imagery with a swath size of 60 km. The processor fully utilizes the available Doppler bandwidth and provides processing options for range migration correction, zero-Doppler deskew, frequency registration, and radiometric correction. The detected-power output product is scaled so as to provide sigma zero radiometric calibration.

Taylor, Victor B.↗

Optical Interconnection Via Computer-Generated Holograms

Method of free-space optical interconnection developed for data-processing applications like parallel optical computing, neural-network computing, and switching in optical communication networks. In method, multiple optical connections between multiple sources of light in one array and multiple photodetectors in another array made via computer-generated holograms in electrically addressed spatial light modulators (ESLMs). Offers potential advantages of massive parallelism, high space-bandwidth product, high time-bandwidth product, low power consumption, low cross talk, and low time skew. Also offers advantage of programmability with flexibility of reconfiguration, including variation of strengths of optical connections in real time.

Liu, Hua-Kuang↗

Breakthrough Propulsion Physics Research Program

In 1996, a team of government, university and industry researchers proposed a program to seek the ultimate breakthroughs in space transportation: propulsion that requires no propellant mass, propulsion that can approach and, if possible, circumvent light speed, and breakthrough methods of energy production to power such devices. This Breakthrough Propulsion Physics program, managed by Lewis Research Center, is one part of a comprehensive, long range Advanced Space Transportation Plan managed by Marshall Space Flight Center. Because the breakthrough goals are beyond existing science, a main emphasis of this program is to establish metrics and ground rules to produce near-term credible progress toward these incredible possibilities. An introduction to the emerging scientific possibilities from which such solutions can be sought is also presented.

Millis, Marc G.↗

Breakthrough Propulsion Physics Workshop Preliminary Results

In August, 1997, a NASA workshop was held to assess the prospects emerging from physics that might lead to creating the ultimate breakthroughs in space transportation: propulsion that requires no propellant mass, attaining the maximum transit speeds physically possible, and breakthrough methods of energy production to power such devices. Because these propulsion goals are presumably far from fruition, a special emphasis was to identify affordable, near-term, and credible research that could make measurable progress toward these propulsion goals. Experiments and theories were discussed regarding the coupling of gravity and electromagnetism, vacuum fluctuation energy, warp drives and wormholes, and superluminal quantum tunneling. Preliminary results of this workshop are presented, along with the status of the Breakthrough Propulsion Physics program that conducted this workshop.

Millis, Marc G.↗

NASA Breakthrough Propulsion Physics Program

In 1996, NASA established the Breakthrough Propulsion Physics program to seek the ultimate breakthroughs in space transportation: propulsion that requires no propellant mass, propulsion that attains the maximum transit speeds physically possible, and breakthrough methods of energy production to power such devices. Topics of interest include experiments and theories regarding the coupling of gravity and electromagnetism, vacuum fluctuation energy, warp drives and worm-holes, and superluminal quantum effects. Because these propulsion goals are presumably far from fruition, a special emphasis is to identify affordable, near-term, and credible research that could make measurable progress toward these propulsion goals. The methods of the program and the results of the 1997 workshop are presented. This Breakthrough Propulsion Physics program, managed by Lewis Research Center, is one part of a comprehensive, long range Advanced Space Transportation Plan managed by Marshall Space Flight Center.

Millis, Marc G.↗

Production of High Intracavity UV Power From a CW Laser Source

The goal of this research project is to create a prototype high power CW source of ultraviolet (UV) photons for photon-electron scattering at the Thomas Jefferson National Accelerator Facility (TJNAF), Hall B. The facility will use optical resonant cavities to produce a high photon flux. The technical approach will be to frequency-double the 514.5 mn light from an Argon-Ion Laser to create 0.1 to 1.0 watt in the UV. The produced UV power will be stored in a resonant cavity to generate an high intracavity UV power of 102 to 103 watts. The specific aim of this project is to first design and construct the low-Q doubling cavity and lock it to the Argon-Ion wavelength. Secondly, the existing 514.5 nm high-Q build-up cavity and its locking electronics will be modified to create high intracavity UV power. The entire system will then be characterized and evaluated for possible beam line use.

David, R. T.↗

Space Exploration Technologies Developed through Existing and New Research Partnerships Initiatives

The Space Partnership Development Program of NASA has been highly successful in leveraging commercial research investments to the strategic mission and applied research goals of the Agency through industry academic partnerships. This program is currently undergoing an outward-looking transformation towards Agency wide research and discovery goals that leverage partnership contributions to the strategic research needed to demonstrate enabling space exploration technologies encompassing both robotic spacecraft missions and human space flight. New Space Partnership Initiatives with incremental goals and milestones will allow a continuing series of accomplishments to be achieved throughout the duration of each initiative, permit the "lessons learned" and capabilities acquired from previous implementation steps to be incorporated into subsequent phases of the initiatives, and allow adjustments to be made to the implementation of the initiatives as new opportunities or challenges arise. An Agency technological risk reduction roadmap for any required technologies not currently available will identify the initiative focus areas for the development, demonstration and utilization of space resources supporting the production of power, air, and water, structures and shielding materials. This paper examines the successes to date, lessons learned, and programmatic outlook of enabling sustainable exploration and discovery through governmental, industrial, academic, and international partnerships. Previous government and industry technology development programs have demonstrated that a focused research program that appropriately shares the developmental risk can rapidly mature low Technology Readiness Level (TRL) technologies to the demonstration level. This cost effective and timely, reduced time to discovery, partnership approach to the development of needed technological capabilities addresses the dual use requirements by the investing partners. In addition, these partnerships help to ensure the attainment of complimenting human and robotic exploration goals for NASA while providing additional capabilities for sustainable scientific research benefiting life and security on Earth.

Nall, Mark↗

Breakthrough Propulsion Physics Project: Project Management Methods

To leap past the limitations of existing propulsion, the NASA Breakthrough Propulsion Physics (BPP) Project seeks further advancements in physics from which new propulsion methods can eventually be derived. Three visionary breakthroughs are sought: (1) propulsion that requires no propellant, (2) propulsion that circumvents existing speed limits, and (3) breakthrough methods of energy production to power such devices. Because these propulsion goals are presumably far from fruition, a special emphasis is to identify credible research that will make measurable progress toward these goals in the near-term. The management techniques to address this challenge are presented, with a special emphasis on the process used to review, prioritize, and select research tasks. This selection process includes these key features: (a) research tasks are constrained to only address the immediate unknowns, curious effects or critical issues, (b) reliability of assertions is more important than the implications of the assertions, which includes the practice where the reviewers judge credibility rather than feasibility, and (c) total scores are obtained by multiplying the criteria scores rather than by adding. Lessons learned and revisions planned are discussed.

Millis, Marc G.↗

Lightweight Sun-Position Sensor Developed

An orbiting spacecraft needs to be able to accurately locate the position of the Sun so that the solar arrays can be pointed toward the Sun. This not only maximizes the production of power, but it also helps the arrays find their orientation in space so that they can accurately point antennae at ground stations. As part of the work on the (now postponed) Mars-2001 Surveyor Lander, NASA Glenn Research Center engineers developed a new Sun sensor that is far lighter and simpler than earlier designs. This sensor uses the technology of a linear photodiode array to find the position of the Sun in one axis. Two of these sensors, used together, can locate the x and y coordinates of the Sun relative to the spacecraft. These sensors have a mass of only 18 g each, nearly an order of magnitude lighter than earlier designs. (This mass does not include the electronic circuit to read the photodiode output, which is on the experiment microcontroller.) Near the center of the field of view, the Sun position can be found to 0.15

Landis, Geoffrey A.↗

Round Trip Energy Efficiency of NASA Glenn Regenerative Fuel Cell System

NASA Glenn Research Center (GRC) has recently demonstrated a Polymer Electrolyte Membrane (PEM) based hydrogen/oxygen regenerative fuel cell system (RFCS) that operated for a charge/discharge cycle with round trip efficiency (RTE) greater than 50 percent. The regenerative fuel cell system (RFCS) demonstrated closed loop energy storage over a pressure range of 90 to 190 psig. In charge mode, a constant electrical power profile of 7.1 kWe was absorbed by the RFCS and stored as pressurized hydrogen and oxygen gas. In discharge mode, the system delivered 3 to 4 kWe of electrical power along with product water. Fuel cell and electrolyzer power profiles and polarization performance are documented in this paper. Individual cell performance and the variation of cell voltages within the electrochemical stacks are also reported. Fuel cell efficiency, electrolyzer efficiency, and the system RTE were calculated from the test data and are included below.

Garcia, Christopher P.↗

The Concept and Experimental Investigation of CO2 and Steam Co-electrolysis for Resource Utilization in Space Exploration

CO2 acquisition and utilization technologies will have a vital role in determining sustained and affordable life support and in-situ fuel production architectures for human and robotic exploration of Moon and Mars. For long-term human exploration to be practical, reliable technologies have to be implemented to capture and chemically reduce the metabolic CO2 from the cabin air to restitute oxygen consumption. Technologies that facilitate the in-situ capture and conversion of atmospheric CO2 to fuel are essential for a viable human mission to Mars and their demonstration on the moon is critical as well. This paper describes the concept and experimental investigation of a CO2 capture and reduction system that comprises an adsorption compressor and a CO2 and steam co-electrolysis unit. The process products include oxygen for life support and Syngas (CO and H2) for synthetic fuel production. Electrochemical performance in terms of CO2 conversion, oxygen production, and power consumption of a system with a capacity to process 1kg CO2 per day (1-person equivalent) will be discussed.

Stoots, Carl↗

An Improved Cryosat-2 Sea Ice Freeboard Retrieval Algorithm Through the Use of Waveform Fitting

We develop an empirical model capable of simulating the mean echo power cross product of CryoSat-2 SAR and SAR In mode waveforms over sea ice covered regions. The model simulations are used to show the importance of variations in the radar backscatter coefficient with incidence angle and surface roughness for the retrieval of surfaceelevation of both sea ice floes and leads. The numerical model is used to fit CryoSat-2 waveforms to enable retrieval of surface elevation through the use of look-up tables and a bounded trust region Newton least squares fitting approach. The use of a model to fit returns from sea ice regions offers advantages over currently used threshold retrackingmethods which are here shown to be sensitive to the combined effect of bandwidth limited range resolution and surface roughness variations. Laxon et al. (2013) have compared ice thickness results from CryoSat-2 and IceBridge, and found good agreement, however consistent assumptions about the snow depth and density of sea ice werenot used in the comparisons. To address this issue, we directly compare ice freeboard and thickness retrievals from the waveform fitting and threshold tracker methods of CryoSat-2 to Operation IceBridge data using a consistent set of parameterizations. For three IceBridge campaign periods from March 20112013, mean differences (CryoSat-2 IceBridge) of 0.144m and 1.351m are respectively found between the freeboard and thickness retrievals using a 50 sea ice floe threshold retracker, while mean differences of 0.019m and 0.182m are found when using the waveform fitting method. This suggests the waveform fitting technique is capable of better reconciling the seaice thickness data record from laser and radar altimetry data sets through the usage of consistent physical assumptions.

CryoSat-2↗

Negative extreme events in gross primary productivity and their drivers in China during the past three decades

Climate extremes have remarkable impacts on ecosystems and are expected to increase with future global warming. However, only few studies have focused on the ecological extreme events and their drivers in China. In this study, we carried out an analysis of negative extreme events in gross primary productivity (GPP) in China and the sub-regions during 1982–2015, using monthly GPP simulated by 12 process-based models (TRENDYv6) and an observation-based model (Yao-GPP). Extremes were defined as the negative 5th percentile of GPP anomalies, which were further merged into individual extreme events using a three-dimensional contiguous algorithm. Spatio-temporal patterns of negative GPP anomalies were analyzed by taking the 1000 largest extreme events into consideration. Results showed that the effects of extreme events decreased annual GPP by 2.8% (i.e. 208 TgC/year) in TRENDY models and 2.3% (i.e. 151 TgC/year) in Yao-GPP. Hotspots of extreme GPP deficits were mainly observed in North China (−53 gC/sq.m year) in TRENDY models and Northeast China (−42 gC/sq.m year) in Yao-GPP. For China as a whole, attribution analyses suggested that extreme low precipitation was associated with 40%–50% of extreme negative GPP events. Most events in northern and western China could be explained by meteorological droughts (i.e. low precipitation) while GPP extreme events in southern China were more associated with temperature extremes, in particular with cold spells. GPP was revealed to be much more sensitive to heat/drought than to cold/wet extreme events. Combined with projected changes in climate extremes in China, GPP negative anomalies caused by drought events in northern China and by temperature extremes in southern China might be more prominent in the future.

Climate change↗

Science Capabilities of the Common Habitat

The Common Habitat is the primary habitable element in a conceptual architecture feasibility study for long-duration space exploration with an eight-person crew size. On lunar or planetary surfaces, the Common Habitat forms the core of a Surface Base Camp. In microgravity, the Common Habitat is the core of the Deep Space Exploration Vehicle (DSEV), an in-space transportation spacecraft. The Common Habitat employs a horizontal orientation that is divided internally into a lower deck, mid deck, and upper deck, roughly separating outfitting into individual, work, and group functions. On a planetary surface, the habitat is incorporated into a base camp, located near the south pole in the case of the Moon. The Mars base camp is currently location agnostic. Each base camp is divided into habitation, landing, resource production, and power zones. In microgravity, the habitat is incorporated into the Deep Space Exploration Vehicle, a vessel capable of transporting the crew within the inner solar system. In addition to crew and teleoperated control of external science assets, the Common Habitat employs a suite of life and physical science laboratory systems to enable it to support science investigations across a variety of destination environments, primarily featuring the Moon and Mars, along with the intervening interplanetary space. Other potential destinations include Near Earth Asteroids and Venus and Earth orbits. Located in the aft starboard section of the Common Habitat mid deck, the life science laboratory supports primarily biology and human research. In its baseline configuration, the laboratory includes horizontal work surfaces, freezers, multiple gloveboxes, sample transfer/exposure capability, large instruments, and reconfigurable ISPR-compatible payload bays. The Medical Care Facility and exercise facility can also support life science research. In the aft port section of the mid deck, the physical science laboratory supports physics, chemistry, materials science, geology, and remote sensing (including astrophysics, heliophysics, Earth science, planetary science, and meteorology). It provides a baseline of similar ISPR-compatible payload bays and adds additional freezers, including those for cryogenic sample storage, a remote sensing workstation, more gloveboxes, also with sample transfer/exposure, combustion chambers, fluid mechanics chambers, and a gas chromatograph. It leverages the Command & Control Center for teleoperations of mobile science assets. Both laboratories are highly modular, with the ability to swap out both payloads and instruments on an as-needed basis. The integrated science outfitting of the Common Habitat positions its crew to contribute to all of NASA’s Moon to Mars science objectives and extend human understanding into the inner solar system.

Lunar Suface↗