Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “polycrystalline”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Simulations of grain growth in tungsten armor materials under ARC plasma edge operation conditions using an integrated plasma-edge/materials model

An integrated model of grain growth deuterium-exposed tungsten polycrystals, consisting of a two-dimensional vertex dynamics model fitted to atomistic data, has been developed to assess the grain growth kinetics of deuterium-exposed polycrystalline tungsten (W). The model tracks the motion of grain boundaries under the effect of driving forces stemming from grain boundary curvature and differential deuterium concentration accumulation. Here, we apply the model to experimentally synthesized tungsten polycrystals under deuterium-saturated conditions relevant to the ARC concept design. The results indicate rapid grain growth kinetics in the near-surface region adjacent to the plasma, where the temperature reaches 1400 K, whereas the microstructure remains stable deeper in the material with the lower temperature of 1000 K. The combined modeling and analysis further reveal that monolithic tungsten produced via conventional fabrication routes is highly susceptible to grain coarsening at temperatures exceeding 1000 K, largely independent of the magnitude of the applied driving force. Moreover, the accumulation of deuterium near grain boundaries has a pronounced inhibitory effect on grain boundary migration. High-angle grain boundaries ( > 50°) contribute more significantly to the overall grain growth process.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Microstructure and CPO evolution of dynamically recrystallized olivine during complex deformation conditions: a full-field numerical modeling approach

The rheological properties of mantle rocks are strongly dependent on their crystallographic preferred orientation (CPO). Olivine CPO, defined by the orientation of seismically fast [100] axes parallel to flow direction, is also thought to be a dominant contributor to seismic anisotropy in the Earth's upper mantle. However, the amount of deformation needed to overprint a new CPO on a pre-existing fabric and the impact of the inherited CPOs on the transient microstructure evolution, remain unknown. This study employs a full-field numerical approach (VPFFT-ELLE) to explore the dynamic recrystallization and microstructural evolution of olivine polycrystalline aggregates under complex deformation conditions. We test four combinations of successive pure shear and simple shear boundary conditions. Findings indicate that inherited CPOs influence subsequent deformation in a manner dependent on the kinematic relationship between successive stages. In all cases, a minor strain increment (ε ∼0.3–0.6) is sufficient to erase the previous microstructure and CPO. However, when deformation conditions change dramatically (e.g., stretching direction changes orthogonally), the intensity of the new CPO developed is significantly lower and strain distribution are specially altered. During a transient strain stage, pre-existing microstructures undergo extensive reworking, especially when deformation conditions are changed dramatically, such as switching from simple shear to a pure shear condition with a parallel shortening direction relative to the stretching direction. We estimate the significance of these results in interpreting observations of seismic velocity anisotropy, concluding that P-wave seismic anisotropy is significantly and positively correlated with the evolution of olivine CPO with deformation history. This research underscores the transient nature of microstructural rearrangement in olivine aggregates and the necessity for caution in interpreting seismic anisotropy in regions with complex deformation histories, as inherited CPOs can influence current fabric development and induce deviation to the present deformation conditions.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Off-stoichiometric semiconductors Cu 1.33+x Zn 1.33-x In 1.33 Se 4 (x = 0, 0.1, 0.2 and 0.3): Synthesis, structure, and thermal and electrical properties

The synthesis, structure, and temperature dependent thermal and electrical properties of off-stoichiometric polycrystalline modified zinc blende quaternary chalcogenides Cu 1.33+x Zn 1.33-x In 1.33 Se 4 , where x = 0, 0.1, 0.2 and 0.3, are investigated. Temperature-dependent electrical properties reveal these compositions to be semiconductors with alteration of the carrier concentration and electrical transport via stoichiometric variation. The thermal conductivity is low for all specimens and intrinsic to these materials. First principles calculations are also reported in establishing a fundamental investigation that illustrates the large variation in stoichiometry that is possible in these materials. This stoichiometric variation results in the observed variation of the transport properties. Overall, the results presented reveal fundamental structure-property relationships in these quaternary chalcogenides, and provides a basis for further research into the viability for large stoichiometric variation in other materials that are of interest for technological applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Structure of triple perovskite BaSr 2 MgTa 2 O 9 revisited

An experimental investigation of the structure and crystal-chemistry of the triple perovskite BaSr 2 MgTa 2 O 9 is reported. Polycrystalline BaSr 2 MgTa 2 O 9 was synthesized via solid-state reaction and its structure quantitatively probed at 10 and 300 ​K using neutron diffraction. Monoclinic (A2/m, a 0 $\bar{b}$ – $b$ – ) and trigonal structural models (P$\bar{3}$c1, a – a – a – ) were fit to diffraction data. The former was found to correctly reproduce experimental intensities, while the latter failed to do so. This difference is attributed to the ability of the monoclinic model to accurately reflect octahedral tilting. BaSr 2 MgTa 2 O 9 features corner-sharing MgO 6 and TaO 6 octahedra with barium and strontium cations occupying cubooctahedral holes. Barium and strontium are disordered over the A site, whereas B site cations magnesium and tantalum are ordered. Finally, chemical substitution of strontium for barium in Ba 3 MgTa 2 O 9 induces tilting of MgO 6 and TaO 6 octahedra in two directions and geometric distortions of MgO 6 octahedra.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Grain-resolved temperature-dependent anisotropy in hexagonal Ti-7Al revealed by synchrotron X-ray diffraction

Hexagonal metals have anisotropic coefficients of thermal expansion causing grain-level internal stresses during heating. High energy x-ray diffraction microscopy, a non-destructive, in situ, micromechanical and microstructural characterization technique, has been used to determine the anisotropic coefficients of thermal expansion (CTEs) for Ti-7Al. Two samples of polycrystalline α-phase Ti-7Al were continuously heated from room temperature to 850 °C while far-field HEDM scans were collected. The results showed a change in the ratio of the CTEs in the ‘a’ and ‘c’ directions which explains discrepancies found in the literature. The CTE additionally appears to be affected by the dissolution of α 2 precipitates. Analysis of the grain-resolved micromechanical data also shows reconfiguration of the grain scale stresses likely due to anisotropic expansion driving crystallographic slip.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Direct Observation of Tungsten Oxidation Studied by In Situ Environmental TEM

In this study, in situ environmental transmission electron microscopy (ETEM) was applied, for the first time, to investigate the thermal oxidation of a pristine and a self-ion irradiated polycrystalline tungsten, using a MEMS-based gas cell at 500 oC to 900 oC in a 1 bar 2%O2/N2 gas mixture. By tracking the dynamic evolution of the tungsten oxide scale as it initiates, grows, and sublimates during a consecutive thermal oxidation experiment, we observed two distinctive tungsten oxide microstructure – one nanocrystalline o-WO3 scale grown on W{27-1 } and W{1-1 8} and another o-WO3 scale exhibits a novel highly textured nanostructure. While the two oxide microstructures shared a similar thickness of ~200 nm after 40-minute early-stage oxidation, the nanocrystalline scale on the W{27-1 } grew much more rapidly at 800 oC than the highly textured oxide at a higher temperature of 900 oC. This suggests both the microstructure of these tungsten oxide scales as well as their oxidation kinetics are highly sensitive to the tungsten surface orientation, and such correlations also change dynamically in the course of oxidation. We also discuss the tungsten oxidation mechanism, the effects of the TEM foil thickness, and the focused ion beam (FIB) Ga+ damage on in situ ETEM oxidation.

In situ ETEM, Tungsten, Thermal oxidation, Orienta↗
DOE OSTI2022

Mapping 3D grain and precipitate structure during in situ mechanical testing of open-cell metal foam using micro-computed tomography and high-energy X-ray diffraction microscopy

Open-cell metal foams are ultra-low-density cellular metals with complex hierarchical structures that span bulk, cell, ligament, and sub-ligament scales and give rise to desirable properties such as high strength-to-weight ratio and excellent energy absorption. Although literature suggests that intrinsic material structures at sub-ligament length scales (e.g., grains and precipitates) play an important role in mechanical behavior of open-cell metal foams, there are very few experimental measurements of such structures in three dimensions and for meaningful volumes of foam. This study seeks to map and track the three-dimensional (3D) grain and precipitate structures of an intact volume of open-cell aluminum foam by advancing microstructural characterization techniques that leverage X-ray micro-computed tomography (μCT) and far-field high-energy X-ray diffraction microscopy (FF-HEDM). A 6%-relative-density aluminum foam sample was mechanically tested in compression while μCT and FF-HEDM measurements were collected at interrupted loading states at beamline 1-ID of the Advanced Photon Source. Further, a new scanning strategy and reconstruction algorithm were established to enable characterization of a foam volume with diameter approximately four times wider than the nominal width of the X-ray beam. The result is a set of maps that detail both the 3D grain and precipitate structures throughout the foam volume at successive strain steps. A novel grain tracking procedure was developed to track individual grains within the foam volume by accounting for the large rigid-body motions that individual ligaments can undergo during mechanical loading. The ability to track grains and precipitate structures in three dimensions throughout large bulk deformation of ultra-low-density polycrystalline materials enables new possibilities for validating numerical models and investigating local failure mechanisms. Furthermore, the methods and procedures developed in this study could be applied to other ultra-low-density structures, such as additively manufactured lattices.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Custom-designed heat treatment simultaneously resolves multiple challenges facing 3D-printed single-crystal superalloys

Single-crystal Ni-based superalloys are currently the material of choice for turbine blade applications, especially with the emerging additive manufacturing (AM) that facilitates the manufacture/repair of these single crystals. This promising AM route, however, comes with a dilemma: in the fusion and heat affected zones after e-beam or laser induced melting, one needs a solutionizing annealing to relieve the residual stresses and homogenize the chemical/microstructure. The super-solvus solutionizing temperature is usually adopted from the protocol for the cast superalloys, which almost always causes recrystallization and stray grain growth, resulting in a polycrystalline microstructure and degrading the high-temperature mechanical performance. Here, in this paper, we demonstrate a custom-designed post-printing heat treatment to replace the conventional super-solvus one. The recovery and relatively low temperature diminish the driving force for recrystallization and the movement of stray grain boundaries, without suffocating the chemical/microstructural homogenization thanks to the narrow dendrite width and short element segregation distance. The optimal duration of the heat treatment is proposed to achieve atomic-diffusion mediated chemical homogenization while limiting γ'-particle coarsening in the interdendritic regions. Our strategy makes it practically feasible to resolve several bottleneck problems with one processing/treatment, removing a seemingly formidable obstacle to effective additive manufacturing of superalloy single crystal products.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Grain boundary metastability controls irradiation resistance in nanocrystalline metals

Grain boundaries (GBs) in polycrystalline materials are powerful sinks for irradiation defects. While standard theories assume that a GB’s efficiency as a sink is defined solely by its character before irradiation, recent evidence conclusively shows that the irradiation sink efficiency is a highly dynamic property controlled by the intrinsic metastability of GBs under far-from-equilibrium irradiation conditions. In this paper, we reveal that the denuded (i.e., defect-free) zone, typically the signature of a strong sink, can collapse as irradiation damage accumulates. We propose a radiation damage evolution model that captures this behavior based on the emergence of a series of irradiation defect-enabled metastable GB microstate changes that dynamically alter the ability of the GB to absorb further damage. We show that these microstate changes control further defect absorption and give rise to the formation of a defect network that manifests itself as a net Nye-tensor signal detectable via lattice curvature experiments.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Location and characterization of heterogeneous phases within Mary Rose wood

Preserving the Mary Rose oak hull for future generations is a major challenge due to the highly heterogeneous nature of waterlogged wooden artifacts, which contain polycrystalline, amorphous, and nanostructured materials that test traditional characterization methods. Effective conservation requires detailed knowledge of the distribution and chemical nature of these species to develop strategies for preventing multiple chemo-mechanical degradation pathways. Here, we apply synchrotron-based computed tomography total scattering methods to the Mary Rose keelson wood that provides valuable position-resolved structural information on multiple embedded species of different length and concentration scales. We identify 5 nm zinc sulfide nanoparticles in the wood, presumably deposits from bacteria operating on the sulfur energy cycle under the anaerobic conditions on the seabed. These are identified as precursors to acid attack on the wood upon removal to an aerobic environment. These insights inform not only next-generation conservation strategies, but also the efficacy and unforeseen issues of previous treatments.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Acoustic velocities, elasticity, and pressure-induced elastic softening in compressed neodymium

For the first time, the acoustic velocities and elasticity of double hexagonal close-packed neodymium (Nd) were measured at high pressure using ultrasonic interferometry in conjunction with synchrotron X-ray techniques. Here, both the compressional and shear wave velocities increased with an increase in pressure of up to ~5.4 GPa before they exhibited almost constant values upon further compression. This pressure-induced elastic wave velocity softening can be attributed to the structural instability in dhcp-Nd. From the current sound velocities and density data, we obtained new bulk and shear moduli as well as their pressure dependence for polycrystalline dhcp-Nd, yielding $B_0$=33.2(9) GPa, $G_0$=14.1(5) GPa, $\partial$$B/$$\partial$$P$ = 3.6 (4) and $\partial$$=G/$$\partial$$P$ = 1.3 (2) while other elasticity-related/mechanical properties, including Young's modulus, Debye temperature, Poisson's ratio, and Grüneisen parameter, which are important parameters for the application of Nd in extreme environments, were also derived.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Mapping TpPa-1 covalent organic framework (COF) molecular interactions in mixed solvents via atomistic modeling and experimental study

Complex solvent environments continue to limit the widespread adoption of organic solvent nanofiltration (OSN) in many chemical industry applications. In this paper we employ a commercially available covalent organic framework (COF), TpPa-1, and force field models to molecularly map separation performance of TpPa-1 membrane in mixed solvents. To minimize time and length scale mismatch between atomistic modeling and experiments, solvent permeance was normalized with water in modeling and experimental results to enable direct comparison. Model outputs, such as organic solvent permeance and solute rejection rate, matched well with filtration results. Since the atomistic models assume that all mass transfer is via through-pore transport, the discrepancies between modeling and experimental results provide insights on the effect of linear polymer defects, adsorption and interstitial mass transfer on polycrystalline COF membrane performance. In sum, force field models can serve as digital twins of COF membranes to simulate separation processes while capturing the effects of COF structure, chemistry, and crystallinity on membrane performance in complex organic solvent environments. Finally, this approach will provide insight into future COF design and synthesis for persisting separation challenges.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Deformation behavior of nanoscale Al–Al 2 Cu eutectics studied by in situ micropillar compression

We report deformation behavior of nanoscale laser processed Al–Al 2 Cu eutectics at room temperature is characterized through in situ micro-pillar compression testing in a scanning transmission microscope. Interlamellar spacing of Al–Al 2 Cu eutectics varies from hundreds of nanometers to 20 nm. Three different sizes of micro-pillars are fabricated in order to study the deformation behaviors of single colony and multiple colonies, corresponding to the single crystal and polycrystal respectively. For single colonies, lamellar orientations parallel, normal or inclined to the loading direction were tested. The main findings are: 1) the plasticity mechanisms strongly depend on loading orientation: buckling and kinking in the parallel-loaded eutectics, planar sliding along Al–Al 2 Cu lamellar interfaces in the incline-loaded eutectics and localized shearing in the normal-loaded eutectics. 2) the incline-loaded eutectics exhibits the lowest compression flow strength, and the normal-loaded eutectics has the highest compression flow strength. 3) with decreasing inter-lamellar spacing, the strength increases and plasticity is uniformly distributed, as opposed to shear localization. Highest compressive plasticity is observed in polycrystalline eutectics with an ensemble of lamellar orientations with ~20 nm average spacing: 17.9% at flow stress of 1.63 GPa, and degenerate, bimodal morphology: 11.1% at flow stress of 1.36 GPa.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Fracture characteristics and heat treatment of laser powder bed fusion additively manufactured GRCop-84 copper

Laser Powder Bed Fusion (LPBF) of Glenn Research Copper 84 (GRCop-84), a Cr 2 Nb (8 at. % Cr, 4 at. % Nb) precipitation hardened alloy, produces a fully dense high conductivity alloy with a yield strength of 500 MPa and ultimate tensile strength (UTS) of 740 MPa, superior to other competing copper alloys, and 20% elongation at fracture for material stressed perpendicular to the build direction. The high thermal stability of the Cr 2 Nb precipitate in the copper matrix reduces coarsening and maintains a 300 MPa yield, 520 MPa UTS and 26% elongation after a 900 °C, 5-h heat treatment, while a 3 h 450 °C heat treatment increases yield to 810 MPa, UTS to 970 MPa with 9% elongation at fracture, for samples stressed perpendicular to the build direction. Tensile strength anisotropy based on print direction was attributed to internal stress and columnar grain formation. Void nucleation during tensile fracture was initiated by brittle fracture of precipitate particles within the copper matrix. Fracture cusps contain matching precipitate fragment geometry on opposing sides located near the cusp center in at least 80% of fracture cusps. An optimal precipitate size of 100 nm is predicted for maximum tensile strength from precipitates on fracture surfaces, while tensile testing with varying heat treatments shows maximum strength with 100 nm and smaller precipitates. Cr2Nb precipitates are shown to transition between polycrystalline and monocrystalline structures at high temperature.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Measurement of grain boundary strength of Inconel X-750 superalloy using in-situ micro-tensile testing techniques in FIB/SEM system

Grain boundaries (GBs), known as two-dimensional defects, are omnipresent in polycrystalline metallic alloys and thus influence a wide range of mechanical properties under different environmental conditions like irradiation and corrosion. Therefore, quantifying the strength of individual GBs is critical for understanding the degradation of mechanical properties of materials under different conditions. In this study we developed an efficient approach for the fabrication of micro-tensile specimens with a GB almost perpendicular to the tensile direction, which is expected to advance the development of individual GB tensile testing at micro or nanoscale in a wide scope of materials. Further, an in-situ cantilever micro-tensile testing method was developed and used to quantify the strength of a Σ3 GB in Inconel X-750 with the combination of finite element modeling. The average ultimate tensile strength (UTS) of a non-irradiated Σ3 GB is estimated at around 1.4 GPa, comparable to that of a neutron-irradiated Σ3 GB with a dose of ~1.5 dpa (1.3 GPa). Moreover, the in-situ push-to-pull micro-tensile testing technique developed in this work provides valuable insights into the high-angle GB deformation and fracture behavior. This method generates qualitatively similar ductility behavior before and after neutron irradiation as the bulk material testing. However, the ductility and UTS values obtained from this method are different from bulk measurements due to vastly different specimen dimensions.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Incorporating dynamic recrystallization into a crystal plasticity model for high-temperature deformation of Ti-6Al-4V

During hot deformation of (α + β) titanium alloys, the simultaneous action of strain and temperature in the (α + β) regime facilitates dynamic recovery, dynamic recrystallization (DRX), and phase transformations via non-equilibrium paths. DRX is manifested in the form of fine recrystallized α or β grains. Here, in the present study, a two-phase crystal plasticity finite element framework (CP-DRX) has been developed which incorporates DRX kinetics into the crystal plasticity (CP) model to predict the flow characteristics of Ti-6Al-4V alloys during thermo-mechanical processing. The CP slip system parameters, as well as elastic properties from both α and β phases of Ti, are calibrated for different strain rate conditions. An EBSD-informed two-phase microstructure representation has been utilized in the CP-DRX framework to explore the time-dependent evolution of DRX microstructure and crystal orientation for different strain rate conditions. The proposed CP-DRX can capture the evolution of crystal orientation and plastic flow stress–strain response of polycrystalline Ti-6Al-4V during the deformation process. Furthermore, the proposed model is able to capture the softening behavior, observed in average stress–strain response from experiments performed using a Gleeble thermomechanical simulator and predict the recrystallization texture.

(α+ β)-Titanium (Ti) Alloys↗
DOE OSTI2020

High-Efficiency Silicon Heterojunction Solar Cells: Materials, Devices and Applications

Photovoltaic (PV) technology offers an economic and sustainable solution to the challenge of increasing energy demand in times of global warming. The world PV market is currently dominated by the homo-junction crystalline silicon (c-Si) PV technology based on high temperature diffused p-n junctions, featuring a low power conversion efficiency (PCE). Recent years have seen the successful development of Si heterojunction technologies, boosting the PCE of c-Si solar cells over 26%. This article reviews the development status of high-efficiency c-Si heterojunction solar cells, from the materials to devices, mainly including hydrogenated amorphous silicon (a-Si:H) based silicon heterojunction technology, polycrystalline silicon (poly-Si) based carrier selective passivating contact technology, metal compounds and organic materials based dopant-free passivating contact technology. The application of silicon heterojunction solar cells for ultra-high efficiency perovskite/c-Si and III-V/c-Si tandem devices is also reviewed. In the last, the perspective, challenge and potential solutions of silicon heterojunction solar cells, as well as the tandem solar cells are discussed.

14 SOLAR ENERGY↗
DOE OSTI2023

Stabilizing Ni-rich layered cathode for high-voltage operation through hierarchically heterogeneous doping with concentration gradient

High-nickel LiNi x Mn y Co 1-x-y O 2 (NMC) cathodes have demonstrated superior energy density, yet their stability is compromised under high voltage conditions. To address this, here we propose a strategy of heterogeneous doping with a concentration gradient, specifically through Sr–Zr co-modification. We synthesized Ni-rich NMC particles featuring several micron-sized secondary particles composed of micron-sized primary grains. This design aims to harness the structural robustness of single-crystalline grains and the favorable diffusion kinetics of polycrystalline secondary particles. Systematic characterization using a combination of electrochemical measurements and synchrotron analytics reveals an intriguing pattern of hierarchically heterogeneous Sr–Zr co-doping. It demonstrates a depth-dependent concentration gradient at the secondary particle level and competing dopant segregation over the buried grain boundaries. This unique characteristic creates opportunities for enhancing battery performance, particularly by optimizing precursors and implementing advanced modulation techniques. We also investigate the dissolution and precipitation of the cathode's transition metal cations upon high-voltage cycling. These insights suggest that a tailored compositional variation can be a viable approach to effectively design the next-generation high-Ni NMC cathode materials for high-voltage lithium batteries.

36 MATERIALS SCIENCE↗