Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “phase variation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
NASA NTRS2012

First Results from an Airborne Ka-band SAR Using SweepSAR and Digital Beamforming

NASA/JPL has developed SweepSAR technique that breaks typical Synthetic Aperture Radar (SAR) trade space using time-dependent multi-beam DBF on receive. Developing SweepSAR implementation using array-fed reflector for proposed DESDynI Earth Radar Mission concept. Performed first-of-a-kind airborne demonstration of the SweepSAR concept at Ka-band (35.6 GHz). Validated calibration and antenna pattern data sufficient for beam forming in elevation. (1) Provides validation evidence that the proposed Deformation Ecosystem Structure Dynamics of Ice (DESDynI) SAR architecture is sound. (2) Functions well even with large variations in receiver gain / phase. Future plans include using prototype DESDynI SAR digital flight hardware to do the beam forming in real-time onboard the aircraft.

Digital Beamforming↗
NASA NTRS2014

Implementation of Statistical Process Control: Evaluating the Mechanical Performance of a Candidate Silicone Elastomer Docking Seal

The National Aeronautics and Space Administration has been developing a novel docking system to meet the requirements of future exploration missions to low-Earth orbit and beyond. A dynamic gas pressure seal is located at the main interface between the active and passive mating components of the new docking system. This seal is designed to operate in the harsh space environment, but is also to perform within strict loading requirements while maintaining an acceptable level of leak rate. In this study, a candidate silicone elastomer seal was designed, and multiple subscale test articles were manufactured for evaluation purposes. The force required to fully compress each test article at room temperature was quantified and found to be below the maximum allowable load for the docking system. However, a significant amount of scatter was observed in the test results. Due to the stochastic nature of the mechanical performance of this candidate docking seal, a statistical process control technique was implemented to isolate unusual compression behavior from typical mechanical performance. The results of this statistical analysis indicated a lack of process control, suggesting a variation in the manufacturing phase of the process. Further investigation revealed that changes in the manufacturing molding process had occurred which may have influenced the mechanical performance of the seal. This knowledge improves the chance of this and future space seals to satisfy or exceed design specifications.

docking seal↗
NASA NTRS2021

Unsteady Propagation and Mean Corrections in Open-Jet and Kevlar® Wind Tunnels

Two types of aeroacoustic wind-tunnel test section configurations have been tested in the NASA Langley Quiet Flow Facility. The first is a more traditional open-jet configuration, where test section flow passes unbounded through the facility anechoic chamber. The second is a Kevlar® panel configuration, where a tensioned Kevlar sheet constrains the test section flow from the facility anechoic chamber. For both configurations, acoustic instrumentation is in the surrounding quiescent space. Both configurations are evaluated with a laser-based pulsed acoustic source, which provides unique capability for assessing the facility unsteady acoustic propagation characteristics. Metrics based on the wander and spread of the pulses are evaluated, and show that measurements using Kevlar walls experience dramatically reduced unsteady effects when compared to the open-jet configuration. This leads to a corresponding improvement in coherence between microphones with the Kevlar configuration, by reducing the variation in magnitude and phase differences between channels. Magnitude corrections for propagation through Kevlar as compared to open-jet propagation are calculated. Although limitations in the experimental setup make quantitative analysis difficult, qualitative analysis shows Kevlar magnitude corrections similar to those determined in previous literature. Directivity effects beyond those already present for open-jet configurations are minimal. When compared with the open-jet configuration, the background noise produced by the Kevlar is found to be its one drawback, showing significantly greater levels at high frequencies.

wind tunnel testing, hybrid acoustic tunnel, facil↗
NASA NTRS2021

Evidence from Galactic Cosmic Rays That the Sun Has Likely Entered A Secular Minimum in Solar Activity

Since the beginning of the space age, the Sun has been in a multi-cycle period of elevated activity (secular maximum). This secular maximum is the longest in the last 9300 years. Since the end of solar cycle 21 (SC21), however, the Sun has shown a decline in over-all activity, which has remarkably increased the fluxes of galactic cosmic rays (GCRs). Here, we investigate the correlation between the modulation of GCRs, the heliospheric magnetic field, and solar wind speed for the last 24 solar cycles to find trends that can potentially be used to predict future solar activity. Specifically, we develop a tool for predicting future magnetic field intensity, based on the hysteresis in the GCR variation, during the last phases of the current cycle. This method estimates that SC25 will be as weak as or weaker than SC24. This would mean that the Sun has likely entered a secular minimum, which, according to historical records, should last for another two cycles (SC2527and SC26).

Solar cycles↗
NASA NTRS1986

Response of hot element flush wall gauges in oscillating laminar flow

The time dependent response characteristics of flush-mounted hot element gauges used as instruments to measure wall shear stress in unsteady periodic air flows were investigated. The study was initiated because anomalous results were obtained from the gauges in oscillating turbulent flows for the phase relation of the wall shear stress variation, indicating possible gauge response problems. Flat plate laminar oscillating turbulent flows characterized by a mean free stream velocity with a superposed sinusoidal variation were performed. Laminar rather than turbulent flows were studied, because a numerical solution for the phase angle between the free stream velocity and the wall shear stress variation that is known to be correct can be obtained. The focus is on comparing the phase angle indicated by the hot element gauges with corresponding numerical prediction for the phase angle, since agreement would indicate that the hot element gauges faithfully follow the true wall shear stress variation.

Giddings, T. A.↗
NASA NTRS1984

Teleconnection patterns in the Southern Hemisphere

Contemporaneous correlations between geopotential heights on a given pressure surface at widely separated points on Earth, commonly referred to as teleconnections, are calculated from monthly mean sea level pressure and 500 mb geopotential height analyses for the Southern Hemisphere for five-month winter and summer seasons. During summer (November-March), anomalies over the three continents occur out of phase with anomalies over the subtropical oceans and in a wavenumber 3 pattern over the Southern Ocean near 55 deg S. The subtropical part of the pattern appears largely associated with the interannual variation of the seasonal cycle and annual mean. In winter (May-September) 500 mb geopotential heights over Africa exhibit positive correlations with heights over South America and the central South Pacific near New Zealand and negative correlations with height over the Southern Ocean. A striking wavenumber three pattern is apparent which shows the correlation of 500 mb geopotential height anomalies with 500 mb anomalies at 50 deg S, 95 deg E during winter. The strong positive correlations between 50 deg S, 95 E and 58 deg S, 150 deg W and 38 deg S, 15 deg W contrast with negative correlations over Antarctica and in low latitudes. Time variations in a similar pattern in sea level pressure are in phase with variations in the 500 mb pattern, suggesting an equivalent barotropic structure.

Mo, K. C.↗
NASA NTRS1990

The orbital period of 4U/MXB 1636-53 (V801 Arae)

The results of CCD photometry of the optical counterpart (V801 Arae) of the X-ray burst source 4U/MXB 1636-53, obtained between 1984 and 1988 are reported. From these data, and additional measurements discussed previously, a linear orbital ephemeris P(orb) = 3.803878 + or - 0.000022 h covering the interval between 1980 and 1988 is derived. The results confirm that substantial night-to-night variations occur in the shape of the light curve, superposed on the periodic brightness variations. No evidence is found for a relation between orbital phase and the delays of optical bursts relative to the coincident X-ray bursts. The variation with orbital phase of the corresponding ratios of optical to X-ray burst fluences and peak fluxes does not follow the average optical light curve. These results suggest that substantial long-term changes occur in the spatial distribution of reprocessing matter in the binary system.

Van Paradijs, J.↗
DOE OSTI2023

A phase-field model for hydraulic fracture nucleation and propagation in porous media

Many geo-engineering applications, for example, enhanced geothermal systems, rely on hydraulic fracturing to enhance the permeability of natural formations and allow for sufficient fluid circulation. Over the past few decades, the phase-field method has grown in popularity as a valid approach to modeling hydraulic fracturing because of the ease of handling complex fracture propagation geometries. However, existing phase-field methods cannot appropriately capture nucleation of hydraulic fractures because their formulations are solely energy-based and do not explicitly take into account the strength of the material. Thus, in this work, we propose a novel phase-field formulation for hydraulic fracturing with the main goal of modeling fracture nucleation in porous media, for example, rocks. Built on the variational formulation of previous phase-field methods, the proposed model incorporates the material strength envelope for hydraulic fracture nucleation through two important steps: (i) an external driving force term, included in the damage evolution equation, that accounts for the material strength; (ii) a properly designed damage function that defines the fluid pressure contribution on the crack driving force. In conclusion, the comparison of numerical results for two-dimensional test cases with existing analytical solutions demonstrates that the proposed phase-field model can accurately model both nucleation and propagation of hydraulic fractures. Additionally, we present the simulation of hydraulic fracturing in a three-dimensional domain with various stress conditions to demonstrate the applicability of the method to realistic scenarios.

15 GEOTHERMAL ENERGY↗
DOE OSTI2021

Structural and chemical disorder enhance point defect diffusion and atomic transport in Ni 3 Al-based γ' phase

The ordered L1 2 γ' Ni 3 Al intermetallic inclusions are routinely used as strengthening constituents in Ni-based superalloys and recent high-entropy alloys. As there are different metallic elements relative to the alloy matrix, the composition of γ' phase inclusions usually suffers some variations. In this work, we studied the elemental partition and its influence on atomic transport properties in a model (NiCo) 3 Al γ' phase with chemical and structural disorder. Combining the Monte Carlo and molecular static techniques, we first determined the elemental distribution in such compositionally-complexed γ' phase. The results suggest that Co tends to segregate, which profoundly influences defect energetics and diffusion properties. By modeling thermally activated diffusion by molecular dynamics, we found that chemical disorder induced by Co can enhance vacancy diffusion while significantly suppress diffusion via interstitial atom migration, as compared to the stoichiometric γ' Ni 3 Al. We further reveal that these observations are closely related to the defect energetics in these systems. Furthermore, our results explain the effects of disorder, long- and short-range orders on the diffusion properties in multicomponent intermetallic alloys, which helps to understand the stability and, thus, γ'-phase-assisted strengthening at different conditions including annealing and irradiation.

36 MATERIALS SCIENCE↗
NASA NTRS1994

Nondestructive evaluation of fatigue damage in aluminum 2024 by x-ray diffraction

Aluminum alloys are widely used in the automobile and aerospace industries. This is due to their attractive low density-high modulus and low density-high strength characteristics. Unfortunately, cyclic stress-strain deformations alter the microstructure of aluminum alloys when they are placed into service. These structural changes can lead to fatigue damage and ultimately service failure. Since x-ray diffraction analysis is known to be a sensitive nondestructive indicator of structural changes due to deformations, this technique is being used to evaluate changes in the microstructure of cycled aluminum 2024 commercial alloys. Line shapes, widths, and positions in an x-ray diffraction pattern depend on microstructural properties such as grain size, grain orientation, residual stress, microstrain, etc. Changes in the microstructure due to fatigue will appear as changes in the diffraction pattern. One parameter used to characterize a reflection in a diffraction pattern is the full width at half maximum (FWHM). Preliminary x-ray diffraction results on cycled Al 2024 indicate that the (111) and (222) reflections of the matrix phase do not show any variations in the FWHM due to an increase in the fatigue cycles. However, the FWHM of the (200) and (400) reflections of the same phase unexpectedly showed a dramatic decrease. These results can be interpreted as due to the relaxation of some initial nonuniform residual stresses in the matrix phase lattice. Further work is in progress to evaluate the FWHM of the second phase of the cycled alloys.

Ferguson, Milton W.↗
DOE OSTI2023

Beta-Stabilized Ti-5Al-5Mo-5V-3Cr Primary and Secondary Phase Characterization using Ultrasonic Attenuation

Ti-5Al-5Mo-5V-3Cr (Ti-5553) is a beta-stabilized titanium alloy being evaluated for its use in additive manufacturing. The development of effective nondestructive characterization tools will be critical for successful insertion of Ti-5553 into applications. The microstructure of Ti-5553 can be modified significantly, through heat treatments alone, to produce single β-phase microstructure or dual α-β microstructure with variations on the types and quantities of the α phase in a β matrix. In this work, a set of heat treatments was chosen to obtain a range of microstructures, followed by an investigation of the ultrasonic response to gauge the degree to which these variations could be detected. Ultrasonic attenuation was selected because of its ability to detect differences in grain size and, potentially, the existence and limited details of secondary phases . Initial results show a very distinctive difference in attenuation between the single phase β and the α+β microstructures, and smaller, but still significant, differences among the α+β microstructures indicating that this approach merits further development.

ultrasonic attenuation, Ti-5Al-5Mo-5V-3Cr, heat tr↗
DOE OSTI2022

Variable Daily Autocorrelation Functions of High-Frequency Seismic Data on Mars

Abstract High-frequency seismic data on Mars are dominated by wind-generated lander vibrations, which are radiated partially to the subsurface. Autocorrelation functions (ACFs) of seismic data on Mars filtered between 1 and 5 Hz show clear phases at ∼1.3, ∼2.6, and ∼3.9 s. Daily temporal changes of their arrival times (dt/t) correlate well with the daily changes of ground temperature, with ∼5% daily variation and ∼50 min apparent phase delay. The following two mechanisms could explain the observations: (1) the interference of two predominant spectral peaks at ∼3.3 and ∼4.1 Hz, assumed to be both lander resonance modes, generate the apparent arrivals in the ACFs; (2) the interference of the lander vibration and its reflection from an interface ∼200 m below the lander generate the 3.3 Hz spectral peak and ∼1.3 s arrival in the ACFs. The driving mechanism of the resolved dt/t that most likely explains the ∼50 min delay is thermoelastic strain at a near-surface layer, affecting the lander–ground coupling and subsurface structures. The two outlined mechanisms suggest, respectively, up to ∼10% changes in ground stiffness at 1–5 Hz and ∼15% velocity changes in the top ∼20 m layer. These are upper bound values considering also other possible contributions. The presented methodology and results contribute to analysis of ACFs with limited data and the understanding of subsurface materials on Mars.

Geochemistry & Geophysics↗
NASA NTRS1979

Near-infrared observations of a new molecular feature in IRC + 10216

This letter presents a spectrum of IRC + 10216 in the 3000-4400-kayser region at 9-kayser resolution. A molecular feature at 3400-3600 kaysers has been detected which is attributed to an unspecified N-H bonded molecule; the feature appears to be variable in phase with the infrared light curve. Evidence is given for temperature variations of the emitting dust shell in phase with the infrared light curve. The results suggest that the variability of the molecular feature is due to reversible dissociation of the responsible molecule, which could occur at the higher temperatures accompanying the maxima of the light curve.

Krassner, J.↗
NASA NTRS1980

On the charge state of the anomalous oxygen component

Observations of a phase lag between the intensity variations of high-energy galactic cosmic rays and the quiet-time oxygen flux in the energy region 7.6-24 MeV/nucleon during the time period 1974-1975 are reported. Phase lag or hysteresis effects have been observed during the 11-year solar cycle for low-energy galactic cosmic rays and several authors have shown that this hysteresis effect is a function of the velocity and rigidity (and therefore of the ionic charge) of the particles. Assuming a similar rigidity dependence of the phase lag during the transient intensity decrease of both galactic cosmic rays and the anomalous oxygen component in the time period 1974-1975, and comparing the phase lag as observed for protons and helium during the same period with the oxygen measurements, an upper limit of approximately 4 is derived for the ionic charge of the anomalous oxygen component.

Klecker, B.↗
NASA NTRS2009

Estimating Accurate Relative Spacecraft Angular Position from DSN VLBI Phases Using X-Band Telemetry or DOR Tones

At present spacecraft angular position with Deep Space Network (DSN) is determined using group delay estimates from very long baseline interferometer (VLBI) phase measurements employing differential one way ranging (DOR) tones. As an alternative to this approach, we propose estimating position of a spacecraft to half a fringe cycle accuracy using time variations between measured and calculated phases as the Earth rotates using DSN VLBI baseline(s). Combining fringe location of the target with the phase allows high accuracy for spacecraft angular position estimate. This can be achieved using telemetry signals of at least 4-8 MSamples/sec data rate or DOR tones.

x-band telemetry↗
DOE OSTI2023

Transmission electron microscopy investigation of phase transformation and fuel constituent redistribution in neutron irradiated U-10wt.%Zr fuel

Uranium-10wt.%zirconium (U-10wt.%Zr) is a primary candidate for fast reactor nuclear fuels. However, there is a lack of data characterizing neutron irradiated crystallographic phases and chemistry. In the current study, the microstructural evolution of a U-10wt.%Zr fuel neutron irradiated to a burnup of 5.7 at.% was investigated by scanning transmission electron microscopy, energy dispersive spectroscopy, and selected area electron diffraction to determine the major phases, alterations in microstructure, and variations in local chemical composition at different localities of a fuel cross-section. The current study revealed that the irradiated U-10wt.%Zr fuel was comprised of various major phases, including a-U, ß-U, and d-UZr2, as well as amorphous and crystalline solid fission product (FP) precipitates within different regions of the fuel cross-section. Regions A and A/B in the center of the fuel were comprised of U-rich, U-intermediate, and U-lean localities with a-U and d-UZr 2 composing the major phases. Regions B and C in the intermediate and peripheral fuel localities, respectively, were comprised of a-U grains, U-rich (ß-U) grains with Zr-rich precipitates, U-intermediate grains (d-UZr2), and solid FP precipitates. The major phases identified were associated with the nanoscopic chemical concentrations, the phase diagram, and the as-characterized specimen temperature, with the exception of the non-equilibrium ß-U phase identified in region B. The U-lean localities in regions A, A/B, B, and C were Zr-enriched pathways along subgrain/grain boundaries. This phenomenon suggests that Zr is susceptible to radiation-induced segregation in U-Zr fuels and indicates a new mechanism for constituent redistribution.

36 MATERIALS SCIENCE↗
NASA NTRS2013

Diurnal Variation in Gravity Wave Activity at Low and Middle Latitudes

We employ a modified composite day extension of the Hocking (2005) analysis method to study gravity wave (GW) activity in the mesosphere and lower thermosphere using 4 meteor radars spanning latitudes from 7deg S to 53.6deg S. Diurnal and semidiurnal modulations were observed in GW variances over all sites. Semidiurnal modulation with downward phase propagation was observed at lower latitudes mainly near the equinoxes. Diurnal modulations occur mainly near solstice and, except for the zonal component at Cariri (7deg S), do not exhibit downward phase propagation. At a higher latitude (SAAMER, 53.6deg S) these modulations are only observed in the meridional component where we can observe diurnal variation from March to May, and semidiurnal, during January, February, October (above 88 km) and November. Some of these modulations with downward phase progression correlate well with wind shear. When the wind shear is well correlated with the maximum of the variances the diurnal tide has its largest amplitudes, i.e., near equinox. Correlations exhibiting variations with tidal phases suggest significant GW-tidal interactions that have different characters depending on the tidal components and possible mean wind shears. Modulations that do not exhibit phase variations could be indicative of diurnal variations in GW sources.

waves↗