Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “peak estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Goldsim Modeling of Vadose Zone Transport for E-Area Naval Reactor Component Disposal Areas: Model Description and Benchmarking

This report documents the development of a GoldSim® model of flow and radionuclide transport to the water table through the Naval Reactor Components Disposal Area (NRCDA) waste disposal sites and underlying vadose zones. The model is designed to be used for Monte Carlo uncertainty analysis in support of the E-Area Performance Assessment (PA). This report describes the model and shows results obtained from benchmarking the model to best-estimate deterministic results obtained using a PORFLOW model of NRCDA vadose zone transport. The PORFLOW model is three-dimensional while the GoldSim model is a simplified one-dimensional treatment. Nevertheless, the GoldSim model was able to accurately reproduce PORFLOW results with some adjustment to the nominal dispersion coefficient and vadose zone flow area used as “tuning” parameters. An example of the results obtained comparing GoldSim and PORFLOW calculation of releases of I-129, Tc-99, C-14 and Ni-59 from waste disposal containers at the 643-26E site is shown in Figure 1 below. For all of the test cases evaluated, GoldSim predicted peak concentrations within 6% of the PORFLOW values and peak times agreed within 8% with the majority of the results in better agreement. The close agreement between the two models provides confidence that GoldSim will give results accurately reflecting the behavior of releases from the NRCDA under off-normal operating conditions for sensitivity and uncertainty analysis

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2021

An efficient computational framework for charge density estimation in twisted bilayer graphene

Electronic properties such as band structure and Fermi velocity in low-angle twisted bilayer graphene (TBG) are intrinsically dependent on the atomic structure. Rigid rotation between individual graphene layers provides an approximate description of the bilayer symmetry. Upon relaxation, in-plane displacement of the atoms in low angle TBG causes a change in the symmetry through the enlargement of the AB stacking regions and the reduction in size of AA and SP stacking regions. However, the effect of this in-plane relaxation on the charge density remains unexplored, because the necessary electronic structure calculations of such large supercells of low twist angle TBG are computationally infeasible. Therefore, we develop a computationally efficient framework that enables the exploration of the charge density symmetry of the low twist angle TBG. This framework is based on the Fourier representation of the charge density which presents high intensity Bragg peaks. Here we find that with the decrease of twist angle, low intensity satellite peaks also become apparent. Our framework incorporates these satellite peaks which reveals transformation of symmetry in the charge density distribution from high to low twist angle TBG. One striking outcome is the demonstration of the electron localization in the AA region of low twist angle TBG. Our framework helps to explain the effect of the atomistic relaxation on the charge density distribution and thus, it provides information about exotic electronic properties of low twist angle TBG at a low computational expense.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Sensitivity and Detection Limit of Spectroscopic-Grade Perovskite CsPbBr 3 Crystal for Hard X-Ray Detection

We report spectroscopic-grade single crystal detectors can register the energies of individual X-ray interactions enabling photon-counting systems with superior resolution over traditional photoconductive X-ray detection systems. Current technical challenges have limited the preparation of perovskite semiconductors for energy-discrimination X-ray photon-counting detection. Here, this work reports the deployment of a spectroscopic-grade CsPbBr 3 Schottky detector under reverse bias for continuum hard X-ray detection in both the photocurrent and spectroscopic schemes. High surface barriers of approximate to ≈ 1 eV are formed by depositing solid bismuth and gold contacts. The spectroscopic response under a hard X-ray source is assessed in resolving the characteristic X-ray peak. The methodology in enhancing X-ray sensitivity by controlling the X-ray energies and flux, and voltage, is described. The X-ray sensitivity varies between a few tens to over 8000 μC Gy air -1 cm -2 . The detectable dose rate of the CsPbBr 3 detectors is as low as 0.02 nGy air s -1 in the energy discrimination configuration. Finally, the unbiased CsPbBr 3 device forms a spontaneous contact potential difference of about 0.7 V enabling high quality of the CsPbBr 3 single crystals to operate in "passive" self-powered X-ray detection mode and the X-ray sensitivity is estimated as 14 μC Gy air -1 cm -2 . The great potential of spectroscopic-grade CsPbBr 3 devices for X-ray photon-counting systems is anticipated in this work.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Electron Bernstein wave conversion of high-field side injected X-modes in QUEST

This paper presents a detailed design of the Q-shu University experimental steady state spherical tokamak's (QUEST's) high-field side (HFS) injection system for electron Bernstein wave (EBW) excitation and the results of an experimental comparison of the HFS eXtraordinary X-mode and low-field side (LFS) ordinary O-mode injection of 8.2 GHz radio frequency (RF) power. Waveguides, as an alternative to mirror polarizers for transmitting RF X-mode power from LFS to HFS for EBW conversion, were used instead of the installation of an RF mirror. Testing of LFS-to-HFS RF power transmission at 8.2 GHz, using an RG-50-type vacuum waveguide in a bench-scale device filled with SF6 gas at 0.03 Mpa, revealed that an RF power of 10.8 kW could traverse the fundamental electron cyclotron resonance layer for 60 s without breakdown. The short-length, open-ended waveguide antenna used in the HFS injection-induced wave diffraction reduced the efficiency of power delivery to the upper hybrid resonance (UHR) by approximately 7% at an electron temperature of 50 eV. The HFS injection was able to produce brighter camera images than the standard LFS injection. The location of the UHR, as estimated by measuring the density with an interferometer, agreed with its location as measured by plasma radiation low-field, side-edge positions shown by fast camera imaging. This indicates that the plasma was produced by mode-converted EBW. The HFS injection had an absorption efficiency of 96%, compared to 40% for LFS. A greater fluctuation of floating potential adjustable to the lower hybrid wave (LHW) was observed in the HFS case by installing a Langmuir probe, confirming that EBW conversion efficiency was higher in the HFS case. Moreover, after setting the poloidal field to B PF = 7.6 mT, plasma current (I P ) in the HFS peaked at 1.3 kA, as opposed to 0.3 kA for LFS, despite LFS injection having a total power of 55 kW, compared to 40 kW for HFS. However, as the impurity level was comparatively high, it is believed that this I P is dominated by pressure-drive, which makes it difficult to analyze EBWCD. Finally, the line-integrated density in the HFS injection peaked at 1.6 × 10 18 m -2 , compared to 8 × 10 17 m -2 in the LFS one.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Line confusion in spectroscopic surveys and its possible effects: shifts in Baryon Acoustic Oscillations position

ABSTRACT Roman Space Telescope will survey about 17 million emission-line galaxies over a range of redshifts. Its main targets are Hα emission-line galaxies at low redshifts (z < 2) and [O iii] emission-line galaxies at high redshifts (z > 2). The Roman Space Telescope will estimate the redshift of these galaxies with single-line identification. This suggests that other emission-line galaxies may be misidentified as the main targets. In particular, it is hard to distinguish between the H β and [O iii] lines as the two lines are close in wavelength and hence the photometric information may not be sufficient to separate them reliably. Misidentifying H β emitter as [O iii] emitter will cause a shift in the inferred radial position of the galaxy by approximately 90 Mpc h−1. This length-scale is similar to the Baryon Acoustic Oscillation (BAO) scale and could shift and broaden the BAO peak, possibly introduce errors in determining the BAO peak position. We qualitatively describe the effect of this new systematic and further quantify it with a light-cone simulation with emission-line galaxies. Our results show a systematic shift in the recovered isotropic BAO positions that depends on the percentage of interlopers (percentage of ${\rm H}\,\beta$) in the sample. The systematic shift can be as large as $0.1{-}0.3\,\mathrm{ per}\,\mathrm{ cent} \, {\rm x}\, {{\%}}{\rm H}\,\beta$ for analysis performed at redshifts z = 1.3−1.9.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Chemical changes in thirdhand smoke associated with remediation using an ozone generator

Ozonation is a common remediation approach to eliminate odors from mold, tobacco and fire damage in buildings. Little information exists to: 1) assess its effectiveness; 2) provide guidance on operation conditions; and 3) identify potential risks associated with the presence of indoor ozone and ozonation byproducts. The goal of this study is to evaluate chemical changes in thirdhand smoke (THS) aerosols induced by high levels of ozone, in comparison with THS aerosols aged under similar conditions in the absence of ozone. Samples representing different stages of smoke aging in the absence of ozone, including freshly emitted secondhand smoke (SHS) and THS, were collected inside an 18-m 3 room-sized chamber over a period of 42 h after six cigarettes were consumed. The experiments involved collection and analysis of gas phase species including volatile organic compounds (VOCs), volatile carbonyls, semivolatile organic compounds (SVOCs), and particulate matter. VOC analysis was carried out by gas chromatography/mass spectrometry with a thermal desorption inlet (TD-GC/MS), and volatile carbonyls were analyzed by on-line derivatization with dinitrophenylhydrazine (DNPH), followed by liquid chromatography with UV/VIS detection. SVOCs were extracted from XAD-coated denuders and Teflon-coated fiberglass filters in the absence of ozone. In those extracts, tobacco-specific nitrosamines (TSNAs) and other SVOCs were analyzed by gas chromatography with positive chemical ionization-triple quadrupole mass spectrometric detection (GC/PCI-QQQ-MS), and polycyclic aromatic hydrocarbons (PAHs) were quantified by gas chromatography with ion trap mass spectrometric detection (GC/IT-MS) in selected ion monitoring mode. Particulate matter concentration was determined gravimetrically. In a second experiment, a 300 mg h -1 commercial ozone generator was operated during 1 h, one day after smoke was generated, to evaluate the remediation of THS by ozonation. VOCs and volatile carbonyls were analyzed before and after ozonation. Extracts from fabrics that were exposed in the chamber before and after ozonation as surrogates for indoor furnishings were analyzed by GC/IT-MS, and aerosol size distribution was studied with a scanning mobility particle sizer. Ozone concentration was measured with a photometric detector. An estimated 175 mg ozone reacted with THS after 1 h of treatment, corresponding to 58% of the total O 3 released during that period. Fabric-bound nicotine was depleted after ozonation, and the surface concentration of PAHs adsorbed to fabric specimens decreased by an order of magnitude due to reaction with ozone, reaching pre-smoking levels. These results suggest that ozonation has the potential to remove harmful THS chemicals from indoor surfaces. However, gas phase concentrations of volatile carbonyls, including formaldehyde, acetaldehyde and acetone were higher immediately after ozonation. Ultrafine particles (UFP, in most cases with size <60 nm) were a major ozonation byproduct. UFP number concentrations peaked shortly after ozonation ended, and remained at higher-than background levels for several hours. Based on these results, minimum re-entry times after ozone treatment were predicted for different indoor scenarios. Clearly defining re-entry times can serve as a practical measure to prevent acute exposures to ozone and harmful ozonation byproducts after treatment. This study evaluated potential benefits and risks associated with THS remediation using ozone, providing insights into this technology.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

The spectra of IceCube Neutrino (SIN) candidate sources – III. Optical spectroscopy and source characterization of the full sample

A correlation between astrophysical high-energy neutrinos and blazars has been suggested by various authors. In particular, a likely association between IceCube events and intermediate- and high-energy peaked BL Lac objects has led to a sample of 47 objects having a high probability of being neutrino sources. In the first paper of this series we reported optical spectroscopy of 17 objects, which together with data taken from the literature covered 80 per cent of the sample. Here, we present spectroscopy obtained at large aperture telescopes of a further 17 objects (plus four additional targets), which completes the sample coverage. For 12 objects we are able to determine the redshift (0.07 < z < 1.6), while for the others we set a lower limit on it, based on either the robust detection of intervening absorption systems or on an estimation derived from the absence of spectral signatures of the host galaxy. With these new data we expand and reinforce the main results of our previous papers, namely the fact that in terms of their broad-band properties our sources appear to be indistinguishable from the rest of the blazar population and the relatively large (>34 per cent and possibly as high as 80 per cent) fraction of masquerading BL Lac objects, for which the low equivalent width of the emission lines is due to the brightness of the boosted continuum, rather than being an intrinsic property, in our sample.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Estimation of Sorption Behavior of Europium to Calcium Silicate Hydrate by Thermal Analysis - 20172

High-level radioactive waste generated from reprocessing processes will be disposed in a geological disposal that is deep underground. Calcium silicate hydrate is formed as a secondary mineral in the repository via the reaction of calcium ions leaching from the cement and the silicic acid dissolved from the host rocks. In this study, the sorption behavior of europium, which is also known as a chemical analog of americium, on calcium silicate hydrate was examined. The solid phase was analyzed via thermogravimetry- differential thermal analysis, differential scanning calorimetry, Raman spectroscopy, fluorescence spectroscopy, and fluorescence lifetime analysis. To understand the behavior of calcium silicate hydrate under conditions saturated with groundwater, the study samples were analyzed using the above methods, except for deferential scanning calorimetry, without a drying process. The results of the differential scanning calorimetry analyses showed that the temperatures for the endothermic peaks of calcium silicate hydrate for the lower Ca/Si ratios were larger than those for the higher Ca/Si ratios for coexistent conditions of europium ions. Hence, the relationships of the temperatures of the endothermic peaks and the Ca/Si ratios were reversed by the addition of europium ions. These study results suggest that calcium silicate hydrate can immobilize europium ions, thus preventing the production of colloidal forms. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2023

K-shell radiation and bright spot characteristics of high-energy-density Fe-Cr-Ni plasmas influenced by X-pinch load geometry

K-shell radiation is diagnostically advantageous for the study of high-energy-density plasmas. Here, the current work investigates the influence of load geometry on K-shell x-rays in Z-pinch plasmas produced on the 1-MA Zebra generator. Stainless steel (Fe: 69%, Cr: 20%, Ni: 9%) X-pinch wire loads are fielded with an interwire angle of 31° (small-angle) or 62.5° (large-angle), respectively and studied using various x-ray diode, imaging, and spectroscopic diagnostics. The large-angle geometry produced large, individual x-ray-emitting bright spots (> 3 keV) at the wire cross-point averaging areas ≥ 1 mm 2 , with noteworthy soft x-ray (> 0.75 keV) bursts and radiation yields ≤ 14.6 kJ. The small-angle geometry produced multiple x-ray-emitting bright spots extending the pinch axis with smaller average sizes (≤ 0.5 mm 2 ), consistent with stronger current, increased radiation yield (≥ 15.5 kJ), and notable hard x-ray (> 9 keV) bursts, which peak with largest cumulative bright spot size. Spectroscopic analysis is performed with non-LTE collisional-radiative modeling, indicating a cold, nonthermal plasma region radiating from neutral to Ne-like ions, a hot, thermal region radiating from Fe and Cr He- and Li-like ions, and an intermediate region radiating Kα satellites from Li-like to O-like ions. Modeling of the nonthermal and satellite features imply a fractional hot electron abundance ~0.1% and ~0.5% for large- and small-angle geometries, respectively. Relative intensity analysis is performed on Heα and Kα lines, revealing intensity ratios that deviate from the original wire composition. Optical depth estimates allude to optically thick, thermal K-shell plasmas with densities consistent with non-LTE modeling.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2023

Quantum spin ice response to a magnetic field in the dipole-octupole pyrochlore Ce 2 Zr 2 O 7

The pyrochlore magnet Ce 2 Zr 2 O 7 has attracted much attention as a quantum spin ice candidate whose novelty derives in part from the dipolar-octupolar nature of the Ce 3+ pseudospin-1/2 degrees of freedom it possesses. We report heat capacity measurements on single crystal samples of Ce 2 Zr 2 O 7 down to T~0.1K in a magnetic field along the [$1,\bar{1},0$] direction. These measurements show that the broad hump in the zero-field heat capacity moves higher in temperature with increasing field strength and is split into two separate humps by the [$1,\bar{1},0$] magnetic field at ~2T. These separate features are due to the decomposition of the pyrochlore lattice into effectively decoupled chains for fields in this direction: One set of chains (α chains) is polarized by the field while the other (β chains) remains free. This situation is similar to that observed in the classical spin ices Ho 2 Ti 2 O 7 and Dy 2 Ti 2 O 7 , but with the twist that here the strong transverse exchange interactions produce substantial quantum effects. Our theoretical modeling suggests that the β chains are close to a critical state, with nearly-gapless excitations. We also report elastic and inelastic neutron scattering measurements on single crystal Ce 2 Zr 2 O 7 in [$1,\bar{1},0$] and [0,0,1] magnetic fields at temperatures down to T=0.03K. The elastic scattering behaves consistently with the formation of independent chains for a [$1,\bar{1},0$] field, while the [0,0,1] field produces a single field-induced elastic magnetic Bragg peak at (0,2,0) and equivalent wavevectors, indicating a polarized spin ice state for fields above ~3T. For both [$1,\bar{1},0$] and [0,0,1] magnetic fields, our inelastic neutron scattering results show an approximately dispersionless continuum of scattering that increases in both energy and intensity with increasing field strength. By modeling the complete set of experimental data using numerical linked cluster and semiclassical molecular dynamics calculations, we demonstrate the dominantly multipolar nature of the exchange interactions in Ce 2 Zr 2 O 7 and the smallness of the parameter θ, which controls the mixing between dipolar and octupolar degrees of freedom. Finally, these results support previous estimates of the microscopic exchange parameters and place strong constraints on the theoretical description of this prominent spin ice candidate.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Quantification of early nonpharmaceutical interventions aimed at slowing transmission of Coronavirus Disease 2019 in the Navajo Nation and surrounding states (Arizona, Colorado, New Mexico, and Utah)

During an early period of the Coronavirus Disease 2019 (COVID-19) pandemic, the Navajo Nation, much like New York City, experienced a relatively high rate of disease transmission. Yet, between January and October 2020, it experienced only a single period of growth in new COVID-19 cases, which ended when cases peaked in May 2020. The daily number of new cases slowly decayed in the summer of 2020 until late September 2020. In contrast, the surrounding states of Arizona, Colorado, New Mexico, and Utah all experienced at least two periods of growth in the same time frame, with second surges beginning in late May to early June. Here, we investigated these differences in disease transmission dynamics with the objective of quantifying the contributions of non-pharmaceutical interventions (NPIs) (e.g., behaviors that limit disease transmission). We considered a compartmental model accounting for distinct periods of NPIs to analyze the epidemic in each of the five regions. We used Bayesian inference to estimate region-specific model parameters from regional surveillance data (daily reports of new COVID-19 cases) and to quantify uncertainty in parameter estimates and model predictions. Our results suggest that NPIs in the Navajo Nation were sustained over the period of interest, whereas in the surrounding states, NPIs were relaxed, which allowed for subsequent surges in cases. Our region-specific model parameterizations allow us to quantify the impacts of NPIs on disease incidence in the regions of interest.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2022

Integration of Pumped Heat Energy Storage with Fossil-Fired Power Plant (Final Report)

The project team of Southwest Research Institute ® (SwRI ® ), Malta Inc. (Malta), and Luminant Generation Company LLC (Luminant) completed a feasibility study for the integration of a 100-MW, 10-hour (1000-MWh) Malta Pumped Heat Energy Storage (MPHES) system with multiple full-sized fossil-fired electricity generation units (EGU) in Luminant portfolio. MPHES is a long-duration, molten-salt-energy storage technology that uses turbomachinery and heat exchangers to transfer energy to a thermal storage media when charging, and removes the heat in a similar fashion when discharging. With high round trip efficiency (60-65%) and long lifespan (30+ years), MPHES provides economic benefits to the fossil-asset owners that can be scaled to integrate with assets across their portfolio. This technology uses hardware components, workforce personnel, and skillsets similar to those used by fossil EGUs, allowing for synergy when co-locating the two technologies. Luminant has approximately 39,000 megawatts of generation across 12 states, operating in six of the seven competitive markets in the U.S. and powered by a diverse portfolio of natural gas, nuclear, coal, and solar facilities. The DeCordova plant in Granbury, Texas, a simple cycle natural gas peaker power plant, was used as the fossil-fired asset in this project. The local market in Granbury, Texas has many influences, including several nearby power plants, a Luminant-owned nuclear plant (Comanche Peak), and substantial wind energy, which causes both negative pricing at night and high market volatility. Reducing false starts of the DeCordova plant and better responding to market volatility would be an economic advantage. Luminant is currently integrating battery storage plant on site to begin addressing these challenges. Integrating long-duration storage, like MPHES, would expand this capability beyond one hour of storage and have the potential to greatly reduce the total number of gas turbine starts. The MPHES charging requirement could help offset the overnight operating costs of Comanche Peak, which cannot load follow, and the nearby Luminant-owned Wise County combined cycle plant that cycles too often. Following the assessment of Luminant’s ERCOT-based portfolio for integration compatibility with Malta’s PHES system and the project tasks of conceptual study, technoeconomic analysis, technology gap assessment, and commercialization plan, the project team effort has resulted in several key outcomes: (1) Identification of market trends in a high-wind penetration market outside a major metropolitan area; (2) Creation of a dispatching model for the MPHES system and the pairing of Li-ion battery with a gas turbine in a real time market; (3) Revenue and cost estimations for operating MPHES alongside a gas peaker plant with real dispatching considerations and comparison with variations in the Malta implementation, including doubling the storage capacity and using two discharge drivetrains; (4) Potential carbon emission reductions possible by replacing gas turbine operation with Malta PHES operation; and (5) Summary of literature-based future market predictions for Texas.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2020

KMT-2019-BLG-1339L: An M Dwarf with a Giant Planet or a Companion near the Planet/Brown Dwarf Boundary

We analyze KMT-2019-BLG-1339, a microlensing event with an obvious but incompletely resolved brief anomaly feature around the peak of the light curve. Although the origin of the anomaly is identified to be a companion to the lens with a low mass ratio q, the interpretation is subject to two different degeneracy types. The first type is the ambiguity in ρ, representing the angular source radius scaled to the angular radius of the Einstein ring, θ {sub E}, and the other is the s ↔ s {sup -1} degeneracy. The former type, “finite-source degeneracy,” causes ambiguities in both s and q, while the latter induces an ambiguity only in s. Here, s denotes the separation (in units of θ {sub E}) in projection between the lens components. We estimate that the lens components have masses (M{sub 1},M{sub 2})-(0.27{sub -0.15}{sup +0.36} M{sub ⊙},11{sub -7}{sup +16} M{sub J}) and -(0.48{sub -0.28}{sup +0.40} M{sub ⊙},1.3{sub -0.7}{sup +1.1} M{sub J}) according to the two solutions subject to the finite-source degeneracy, indicating that the lens comprises an M dwarf and a companion with a mass around the planet/brown dwarf boundary or a Jovian-mass planet. It is possible to lift the finite-source degeneracy by conducting future observations utilizing a high-resolution instrument because the relative lens–source proper motion predicted by the solutions is widely different.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Simulations of saturated MHD activity in the HBT-EP tokamak

The NIMROD code is used to perform simulations of MHD activity in the HBT-EP tokamak, including the effect of a resistive wall. Linear simulations are conducted to scan current and pressure profiles to establish self-consistent baseline equilibria that result in MHD instabilities with low error between experimental diagnostics and synthetic equivalents. A family of such equilibria is found with relatively peaked current and pressure profiles. Nonlinear simulations are performed using the optimal equilibrium, which is linearly unstable to a Resistive Wall Mode—stable in the ideal wall limit and with an Alfvénic growth rate in the no-wall limit. Using resistive wall boundary conditions, nonlinear Hall MHD simulations yield a rotating, saturated n=1 mode similar to the type observed experimentally in HBT-EP discharges. An n=1 mode around the q=2 surface mediates a localized axisymmetric perturbation that flattens the plasma current from a linearly unstable state to a 3D, rotating, stable state. During the saturated period, periodic changes in inter-diagnostic phase lag allow for qualitative estimations of effective, macroscopic transport coefficients used in MHD closure models and could be extended to model post-disruption MHD structure rotation after thermal quenches seen in HBT-EP.

Arnold, David A. (ORCID:0009000059535761)↗
DOE OSTI2022

GAL08, an Uncultivated Group of Acidobacteria, Is a Dominant Bacterial Clade in a Neutral Hot Spring

GAL08 are bacteria belonging to an uncultivated phylogenetic cluster within the phylum Acidobacteria . We detected a natural population of the GAL08 clade in sediment from a pH-neutral hot spring located in British Columbia, Canada. To shed light on the abundance and genomic potential of this clade, we collected and analyzed hot spring sediment samples over a temperature range of 24.2–79.8°C. Illumina sequencing of 16S rRNA gene amplicons and qPCR using a primer set developed specifically to detect the GAL08 16S rRNA gene revealed that absolute and relative abundances of GAL08 peaked at 65°C along three temperature gradients. Analysis of sediment collected over multiple years and locations revealed that the GAL08 group was consistently a dominant clade, comprising up to 29.2% of the microbial community based on relative read abundance and up to 4.7 × 10 5 16S rRNA gene copy numbers per gram of sediment based on qPCR. Using a medium quality threshold, 25 single amplified genomes (SAGs) representing these bacteria were generated from samples taken at 65 and 77°C, and seven metagenome-assembled genomes (MAGs) were reconstructed from samples collected at 45–77°C. Based on average nucleotide identity (ANI), these SAGs and MAGs represented three separate species, with an estimated average genome size of 3.17 Mb and GC content of 62.8%. Phylogenetic trees constructed from 16S rRNA gene sequences and a set of 56 concatenated phylogenetic marker genes both placed the three GAL08 bacteria as a distinct subgroup of the phylum Acidobacteria , representing a candidate order ( Ca. Frugalibacteriales) within the class Blastocatellia. Metabolic reconstructions from genome data predicted a heterotrophic metabolism, with potential capability for aerobic respiration, as well as incomplete denitrification and fermentation. In laboratory cultivation efforts, GAL08 counts based on qPCR declined rapidly under atmospheric levels of oxygen but increased slightly at 1% (v/v) O 2 , suggesting a microaerophilic lifestyle.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

TARDIS. II. Synergistic Density Reconstruction from Lyα Forest and Spectroscopic Galaxy Surveys with Applications to Protoclusters and the Cosmic Web

Looking at this work, we expand upon the Tomographic Absorption Reconstruction and Density Inference Scheme (TARDIS) in order to include multiple tracers while reconstructing matter density fields at Cosmic Noon (z ~ 2–3). In particular, we jointly reconstruct the underlying density field from simulated Lyα forest observations at z ~ 2.5 and an overlapping galaxy survey. We find that these data are synergistic, with the Lyα forest providing reconstruction of low-density regions and galaxy surveys tracing the density peaks. We find a more accurate power spectra reconstruction going to higher scales when fitting these two data sets simultaneously than when using either one individually. When applied to cosmic web analysis, we find that performing the joint analysis is equivalent to an Lγα survey with significantly increased sight-line spacing. Because we reconstruct the velocity field and matter field jointly, we demonstrate the ability to evolve the mock observed volume further to z = 0, allowing us to create a rigorous definition of a “protocluster” as regions that will evolve into clusters. We apply our reconstructions to study protocluster structure and evolution, finding for realistic survey parameters that we can provide accurate mass estimates of the z ≈ 2 structures and their z = 0 fate.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

KGML-ag: a modeling framework of knowledge-guided machine learning to simulate agroecosystems: a case study of estimating N<sub>2</sub>O emission using data from mesocosm experiments

Abstract. Agricultural nitrous oxide (N2O) emission accounts for a non-trivial fraction of global greenhouse gas (GHG) budget. To date, estimating N2O fluxes from cropland remains a challenging task because the related microbial processes (e.g., nitrification and denitrification) are controlled by complex interactions among climate, soil, plant and human activities. Existing approaches such as process-based (PB) models have well-known limitations due to insufficient representations of the processes or uncertainties of model parameters, and due to leverage recent advances in machine learning (ML) a new method is needed to unlock the “black box” to overcome its limitations such as low interpretability, out-of-sample failure and massive data demand. In this study, we developed a first-of-its-kind knowledge-guided machine learning model for agroecosystems (KGML-ag) by incorporating biogeophysical and chemical domain knowledge from an advanced PB model, ecosys, and tested it by comparing simulating daily N2O fluxes with real observed data from mesocosm experiments. The gated recurrent unit (GRU) was used as the basis to build the model structure. To optimize the model performance, we have investigated a range of ideas, including (1) using initial values of intermediate variables (IMVs) instead of time series as model input to reduce data demand; (2) building hierarchical structures to explicitly estimate IMVs for further N2O prediction; (3) using multi-task learning to balance the simultaneous training on multiple variables; and (4) pre-training with millions of synthetic data generated from ecosys and fine-tuning with mesocosm observations. Six other pure ML models were developed using the same mesocosm data to serve as the benchmark for the KGML-ag model. Results show that KGML-ag did an excellent job in reproducing the mesocosm N2O fluxes (overall r2=0.81, and RMSE=3.6 mgNm-2d-1 from cross validation). Importantly, KGML-ag always outperforms the PB model and ML models in predicting N2O fluxes, especially for complex temporal dynamics and emission peaks. Besides, KGML-ag goes beyond the pure ML models by providing more interpretable predictions as well as pinpointing desired new knowledge and data to further empower the current KGML-ag. We believe the KGML-ag development in this study will stimulate a new body of research on interpretable ML for biogeochemistry and other related geoscience processes.

54 ENVIRONMENTAL SCIENCES↗