Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “optical elements”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Structural and Improper Ferroelectric Properties of TbInO 3 Single Crystal Grown by Laser Floating Zone

The honeycomb TbInO 3 has attracted wide research attention due to its fascinating physical properties. However, TbInO 3 single crystal was difficult to grow owing to the high melting point and serious volatilization of indium during the crystal growth. In this study, the volatilization of the indium element was effectively suppressed by controlling the growth atmosphere and pressure. The excess ratio of indium oxide was determined, and pure hexagonal TbInO 3 crystal was obtained by the laser floating zone method. Systematic studies on the crystal structure and optical and ferroelectric properties were carried out. The structure distortion resulted in the improper geometric ferroelectric revealed by single crystal diffraction and Raman spectrum measurements. The topological vortex domains and P-E hysteresis loop demonstrated the presence of ferroelectricity. TbInO 3 crystal has great potential application in vortex memory.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Hollow-cathode chemical vapor deposition of thick, low-stress diamond-like carbon films

A radio-frequency (RF), hollow-cathode plasma source with confining magnetic field is described for the chemical vapor deposition of thick ( > 10 µm), amorphous diamond-like carbon ablator films for inertial confinement fusion applications. Plasma is characterized by optical emission spectroscopy, while properties of the resultant films are measured by a combination of profilometry, Rutherford backscattering spectrometry, elastic recoil detection analysis, X-ray diffraction, Raman spectroscopy, and atomic force microscopy. The dependence of the deposition rate, film density, elemental composition, self-bias and residual stress is reported as a function of RF power. Higher density films were found when using Ar plasma, than N 2 or H 2 plasma. The coatings produced are x-ray amorphous, exhibit low compressive stress ( ~ 100 MPa), high density ( < 1.7 g/cm 3 ), hydrogen content of ~ 30 at.%, and a low average roughness of 0.75 nm. Finally, applications of these films as tunable-density ablators for inertial confinement fusion experiments are discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Selective incorporation of antimony into gallium nitride

Dilute concentrations of antimony (Sb) incorporation into GaN induce strong bandgap bowing and tunable room-temperature photoluminescence from the UV to the green spectral regions. However, the atomistic details of the incorporation of Sb into the GaN host remain unclear. In this work, we use first-principles calculations to understand the thermodynamics of Sb substitution into GaN and its effect on the optical and Raman spectra. Although it is empirically considered that Sb is preferentially incorporated as an anion (Sb3−) into the N sublattice, we demonstrate that Sb can also be incorporated as a cation (Sb3+, Sb5+) into the metal sublattice. Our thermodynamic analysis demonstrates that SbN0, SbGa2+, and SbGa0 can co-exist under Ga-rich conditions in n-type samples. We further confirm the dual incorporation of Sb by calculating the vibrational frequencies of different anionic and cationic substitutions to explain the origins of experimentally observed additional Raman peaks of Sb-doped GaN. Moreover, the calculated band structures of different Sb substitutions into GaN explain the experimental photoluminescence and optical absorption spectra. Overall, our analysis suggests that the coexistence of Sb3−, Sb3+, and Sb5+ substitutions into GaN explains the totality of experimental measurements. Our results demonstrate that the selective incorporation of Sb into GaN (and potentially other group-V elements such as As, P, or Bi) by tuning the growth conditions can drastically modify the electronic properties, for applications in visible light emitters and photocatalysis.

Physics↗
DOE OSTI2024

Quantum embedding study of strain- and electric-field-induced Stark effects on the NV - center in diamond

The NV - color center in diamond has been demonstrated as a powerful nanosensor for quantum metrology due to the sensitivity of its optical and spin properties to external electric, magnetic, and strain fields. In view of these applications, we use quantum embedding to derive a many-body description of strain- and electric-field-induced Stark effects on the NV - center. Here, we quantify how strain longitudinal to the axis of NV - shifts the excited states in energy, while strain with a component transverse to the NV - axis splits the degeneracies of the 3 E and 1 E states. The largest effects are for the optically relevant 3 E manifold, which splits into E x and E y with transverse strain. From these responses we extract strain susceptibilities for the E x/y states within the quasilinear regime. Additionally, we study the many-body dipole matrix elements of the NV - and find a permanent dipole 1.6 D at zero strain, which is somewhat smaller than that obtained from recent density functional theory calculations. We also determine the transition dipole between the E x and E y and how it evolves with strain.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

Neutron Radiography and Computed Tomography of Biological Systems at the Oak Ridge National Laboratory's High Flux Isotope Reactor

Neutrons have historically been used for a broad range of biological applications employing techniques such as small-angle neutron scattering, neutron spin echo, diffraction, and inelastic scattering. Unlike neutron scattering techniques that obtain information in reciprocal space, attenuation-based neutron imaging measures a signal in real space that is resolved on the order of tens of micrometers. The principle of neutron imaging follows the Beer-Lambert law and is based on the measurement of the bulk neutron attenuation through a sample. Greater attenuation is exhibited by some light elements (most notably, hydrogen), which are major components of biological samples. Contrast agents such as deuterium, gadolinium, or lithium compounds can be used to enhance contrast in a similar fashion as it is done in medical imaging, including techniques such as optical imaging, magnetic resonance imaging, X-ray, and positron emission tomography. For biological systems, neutron radiography and computed tomography have increasingly been used to investigate the complexity of the underground plant root network, its interaction with soils, and the dynamics of water flux in situ. Moreover, efforts to understand contrast details in animal samples, such as soft tissues and bones, have been explored. This manuscript focuses on the advances in neutron bioimaging such as sample preparation, instrumentation, data acquisition strategy, and data analysis using the High Flux Isotope Reactor CG-1D neutron imaging beamline. The aforementioned capabilities will be illustrated using a selection of examples in plant physiology (herbaceous plant/root/soil system) and biomedical applications (rat femur and mouse lung).

Bilheux, Hassina↗
DOE OSTI2021

Layered Double Perovskites

Successful strategies for the design of crystalline materials with useful function are frequently based on the systematic tuning of chemical composition within a given structural family. Perovskites with the formula ABX 3 , perhaps the best-known example of such a family, have a vast range of elements on A, B, and X sites, which are associated with a similarly vast range of functionality. Layered double perovskites (LDPs), a subset of this family, are obtained by suitable slicing and restacking of the perovskite structure, with the additional design feature of ordered cations and/or anions. In addition to inorganic LDPs, we also discuss hybrid (organic-inorganic) LDPs here, where the A-site cation is a protonated organic amine. Several examples of inorganic LDPs are presented with a discussion of their ferroic, magnetic, and optical properties. The emerging area of hybrid LDPs is particularly rich and is leading to exciting discoveries of new compounds with unique structures and fascinating optoelectronic properties. We provide context for what is important to consider when designing new materials and conclude with a discussion of future opportunities in the broad LDP area.

Materials Science↗
DOE OSTI2025

The R -process Alliance: Enrichment of r -process Elements in a Simulated Milky Way–like Galaxy

We study the formation of stars with varying amounts of heavy elements synthesized by the rapid neutron-capture process (r-process) based on our detailed cosmological zoom-in simulation of a Milky Way–like galaxy with an N-body/smoothed particle hydrodynamics code, asura. Most stars with no overabundance in r-process elements, as well as the strongly r-process-enhanced (RPE) r-II stars ([Eu/Fe] > +0.7), are formed in dwarf galaxies accreted by the Milky Way within the 6 Gyr after the Big Bang. In contrast, over half of the moderately enhanced r-I stars (+0.3 < [Eu/Fe] ≤ +0.7) are formed in the main in situ disk after 6 Gyr. Our results suggest that the fraction of r-I and r-II stars formed in disrupted dwarf galaxies is larger the higher their [Eu/Fe] is. Accordingly, the most strongly enhanced r-III stars ([Eu/Fe] > +2.0) are formed in accreted components. These results suggest that non-r-process-enhanced stars and r-II stars are mainly formed in low-mass dwarf galaxies that hosted either none or a single neutron star merger, while the r-I stars tend to form in the well-mixed in situ disk. We compare our findings with high-resolution spectroscopic observations of RPE metal-poor stars in the halo and dwarf galaxies, including those collected by the R-Process Alliance. We conclude that observed [Eu/Fe] and [Eu/Mg] ratios can be employed in chemical tagging of the Milky Way’s accretion history.

Chemical enrichment↗
DOE OSTI2023

In situ high-harmonic microscopy of a nanostructured solid

Nanostructured optical surfaces allow exquisite control over linear and nonlinear light interactions, where the surface actively creates new frequencies up to high-order harmonics of an intense infrared driving laser field. The function and performance of these surfaces depend sensitively on the distribution of the high-harmonic fields in and between the nanostructured elements, as the high-harmonic wavelength becomes comparable to the nanoscale features of the surface. Imaging the nonlinear response at the active surface with nanometer resolution would greatly benefit the optimization of the metasurface's function. Here we demonstrate an approach to lensless imaging of extreme ultraviolet high harmonics that resolves the amplitude and phase of nonlinear polarization at the active nanostructured surface of an MgO crystal. Imaging the near-field distribution of high harmonics is the gateway to optimized functional high-harmonic metasurfaces and the integration of high harmonics on a chip.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Electronic heat generation in semiconductors: Non-equilibrium excitation and evolution of zone-edge phonons via electron–phonon scattering in photo-excited germanium

We investigate experimentally and using first-principles theory the generation of phonons and the relaxation of carriers on picosecond timescales across the Brillouin zone of photo-excited Ge by inter-valley electron–phonon scattering. The phonons generated are typical of those generated in semiconductor devices, contributing to the accumulation of heat within the material. We simulate the time-evolution of phonon populations, based on first-principles band structure and electron–phonon and phonon–phonon matrix elements, and compare them to data from time-resolved x-ray diffuse scattering experiments, performed at the Linac Coherent Light Source x-ray free-electron laser facility, following photo-excitation by a 50 fs near-infrared optical pulse. We show that the intensity of the non-thermal x-ray diffuse scattering signal, which is observed to grow substantially near the L-point of the Brillouin zone over 3–5 ps, is due to phonons generated by scattering of carriers between the Δ and L valleys. These phonons have low group velocities, resulting in a heat bottleneck. With the inclusion of phonon decay through 3-phonon processes, the simulations also account for other non-thermal features observed in the x-ray diffuse scattering intensity, which are due to anharmonic phonon–phonon scattering of the phonons initially generated by electron–phonon scattering.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Spectroscopic Fourth-order Coronagraph for the Characterization of Terrestrial Planets at Small Angular Separations from Host Stars

We propose a new approach for high-contrast imaging at the diffraction limit using segmented telescopes in a modest observation bandwidth. This concept, named “spectroscopic fourth-order coronagraphy,” is based on a fourth-order coronagraph with a focal-plane mask that modulates the complex amplitude of the Airy disk along one direction. While coronagraphs applying the complex amplitude mask can achieve the theoretical limit performance for any arbitrary pupils, the focal-plane mask severely limits the bandwidth. Here, focusing on the fact that the focal-plane mask modulates the complex amplitude along one direction, we noticed that the mask can be optimized for each spectral element generated by a spectrograph. We combine the fourth-order coronagraph with two spectrographs to produce a stellar spectrum on the focal plane and reconstruct a white pupil on the Lyot stop. Based on the wave-front analysis of an optical design applying an Offner-type imaging spectrograph, we found that the achievable contrast of this concept is 10{sup −10} at 1.2–1.5 times the diffraction limit over the wavelength range of 650–750 nm for the entrance pupil of the LUVOIR telescope. Thus, this coronagraph concept could bring new habitable planet candidates not only around G- and K-type stars beyond 20–30 pc but also around very nearby M-type stars. This approach potentially promotes the characterization of the atmospheres of nearby terrestrial planets with future on- and off-axis segmented large telescopes.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

Critical analysis of velocimetry methods for particulate flows from synthetic data

Particle tracking methods that extract high-fidelity particle velocity data from high speed video of particle laden flows is a common experimental technique applied to chemical processes. These measurements are used to better understand the motion of particles and fluids in complex systems and create data against which computational models are validated. However, the methods, codes, and experimental setups all have limitations. It is imperative that practitioners verify the methods and their implementation as well as understand the limitations of experimental setups. This work focuses on quantifying the visible depth of field in a high particle concentration fluidized bed. Following a precedent set by the particle imaging velocimetry community, a particle velocity field is manufactured using a computational fluid dynamics and discrete element method simulation. Photo realistic high-speed videos are rendered based on the simulated data using the three-dimensional creation software Blender. Particle velocities are extracted from the synthetic high-speed videos using three variants of Particle Tracking Velocimetry and Optical Flow Velocimetry methodologies. Here, the tracked results are then compared to the known solution, quantifying the error associated with the assumed visible depth. The results indicate that at depth of one particle diameter, all three particle tracking codes give accurate measurements, largely within 5%. However, the error increases when the full bed video measurements are compared to the known solution at one particle diameter, i.e., mimicking a validation study. Finally, for some statistics the constant depth assumption only increases the error slightly, for others significantly.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

High Speed, Localized Multi-Point Strain Measurements on a Containment Vessel at 1.7 MHz Using Swept-Wavelength Laser-Interrogated Fiber Bragg Gratings

Dynamic elastic strain in ~1.8 and 1.0 m diameter containment vessels containing a high explosive detonation was measured using an array of fiber Bragg gratings. The all-optical method, called real-time localized strain measurement, recorded the strain for 10 ms after detonation with additional measurements being sequentially made at a rate of 1.7 MHz. A swept wavelength laser source provided the repetition rate necessary for such high-speed measurements while also providing enough signal strength and bandwidth to simultaneously measure 8 or more unique points on the vessel’s surface. The data presented here arethen compared with additional diagnostics consisting of a fast spectral interferometer and an optical backscatter reflectometer to show a comparison between the local and global changes in the vessel strain, both dynamically and statically to further characterize the performance of the localized strain measurement. The results are also compared with electrical resistive strain gauges and finite element analysis simulations.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

Incorporation of rare earth elements $\text{Sc}$, $\text{Y}$ and $\text{La}$ into gibbsite

Rare earth elements (REE) are increasingly critical resources in technological applications, but the current understanding of their separation by uptake into minerals remains limited. We examined the adsorption and solubilization of scandium (Sc), yttrium (Y), and lanthanum (La) into aluminum hydroxide (gibbsite, Al(OH) 3 ). Based on spectroscopic investigations such as inductively coupled plasma-optical emission spectroscopy (ICP-OES) and time of flight-secondary ion mass spectrometry (ToF-SIMS), only Sc exhibited favorable incorporation and adsorption (0.66 and 0.06 atom%, respectively). Analysis of solid state 45 Sc magic angle spinning-nuclear magnetic resonance spectroscopy (MAS-NMR) indicated that Sc exhibits an octahedral coordination consistent with isolated substitutions for Al in the gibbsite structure, leading to a increase in lattice constants detectable by X-ray diffraction. Density functional theory (DFT) calculations reinforced this interpretation by reproducing the detected structural distortion as well as demonstrating the relatively favorable energetic basis for Sc incorporation into gibbsite by substitution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Curvilinear Magnonic Crystal Based on 3D Hierarchical Nanotemplates

Curvilinear magnetic nanostructures enable control of magnetization dynamics through geometry-induced anisotropy and chiral interactions, as well as magnetic field modulation. In this work, we report a curvilinear magnonic crystal based on large-area square arrays of truncated nanospikes fabricated by conformal coating of 3D hierarchical templates with permalloy thin films. Brillouin light scattering spectroscopy reveals an anisotropic band structure with multiple dispersive and folded Bloch-type dispersive spin-wave modes as well as nondispersive modes exhibiting direction-dependent frequency shifts and intensity asymmetries along lattice principal axes. Finite element micromagnetic simulations indicate that curvature-induced variations of the demagnetizing field govern the magnonic response, enabling the identification of modes propagating in nanochannels and others localized on nanospike apexes or along the ridges connecting adjacent nanospikes. The combination of geometric curvature and optical probing asymmetry produces directional dependence of magnonic bands, establishing 3D hierarchical templates as a versatile platform for curvature-engineered magnonics.

3D hierarchical templates↗
DOE OSTI2026

Equivalent equilibrium ion distributions in ion sources and beams

Ion sources and ion beams often contain ions of more than one charge-to-mass ratio, due to the presence of multiple ionization states and/or multiple atomic and molecular ion species in the source. We show that, under certain conditions, analysis of these systems can be simplified using the notion of “equivalent equilibrium ion distributions” (EEIDs). These distributions have identical ion trajectories, space-charge distributions, and electric-field distributions, but can be composed of ion species with arbitrary charge-to-mass ratios. We use this result to obtain multi-species generalizations for the perveance of an ion diode, which relates the diode voltage to the extracted beam current, and for the perveance of a drifting ion beam, which determines the axial length-scale for beam expansion due to the self-electric field. Applied to a quasi-neutral plasma ion source containing cold ions and hot electrons, we find that the location of the beam-plasma interface (meniscus), where ions are extracted from the plasma, depends on the electron density and ion energy per unit charge at the interface, independent of the ion composition. For certain types of numerical simulations, EEIDs allow one to calculate the beam optics of an intense multi-species ion source by doing a simulation for a single ion species with an artificial charge-to-mass ratio chosen to minimize computation time. We illustrate these results using the 3D particle-in-cell, finite-element code Aleph. The simulations show how ions in a plasma source self-consistently accelerate to the supersonic speed needed for steady, radially expanding flow. Multi-species equilibria are subject to streaming instabilities because, while the different species have the same kinetic energy per unit charge, their velocities scale with the square root of the charge-to-mass ratio. The simulations show that a strong ion streaming instability can occur in a multi-species plasma ion source.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2023

Exploring the Focusing Mechanism of the NuMI Horn Magnets

Neutrinos at the Main Injector (NuMI) is a project at Fermilab that provides an intense beam of neutrinos used by a number of experiments. NuMI creates a beam of pions that decay into neutrinos, muons, and other particles. Muons are registered by the muon monitors. Magnetic horns are the key elements of the NuMI beam line. This paper uses the muon beam profile observed at the muon monitors to study the NuMI horn focusing mechanism. It is found that the horn magnet generates dipole and quadrupole fields to focus pions. This suggests that the optics of the horn magnet are predominantly linear. Our study shows that the muon beam profile accurately detects the horn current within 0.05%.

43 PARTICLE ACCELERATORS↗
DOE OSTI2020

Analysis of laser-induced modification of collagen structure using nonlinear optical microscopy

Nonlinear optical microscopy is used to monitor changes in the collagen structure of patellar ligament after IR laser heating up to a temperature of 60 °C. Pre-denaturation modification of the tissue matrix exhibits specific properties and consists in splitting of initially parallel fibre bundles into array of divergent fibres. Image processing employing Fast Fourier transform analysis is used for characterising images of the fibre structure and determining the collagen orientation index. An increase in manifestation of laser-induced disordering with an increase in IR laser radiation power from 0.3 to 2 W is accompanied by a decrease in the collagen orientation index. The specific disorganisation of the collagen tissue structure during laser heating is supposed to be due to fast speed and local action of the laser heating, which leads to mechanical distortions of the structural elements of tissue matrix. (paper)

36 MATERIALS SCIENCE↗
DOE OSTI2025

Structural complexity in the f -block: small deviations of the complexation of lanthanides by O,Oʹ -diethylmonothiophosphate

Dithiophosphinic acids undergo radiolytic degradation during the extraction of actinides in used nuclear fuel. These will degrade into monothiophosphinic acids and then to phosphinic acids. To elucidate how the complexes that are formed during these radioactive separations change as the ligand degrades, the mixed donor ligand O,O′- diethylmonothiophosphate is chosen as an analog for the monothiophosphinic intermediate. Herein, the monothiophosphate complexes Ln 2 (OPS(OEt) 2 ) 6 (H 2 O) 8 (Ln = La) (La 2 L 6 H 2 O), Ln 2 (OPS(OEt) 2 ) 6 (EtOH) 4 (Ln = La) (La 2 L 6 EtOH), K 2 [Ln(OPS(OEt) 2 ) 5 (H 2 O) 2 ]·H 2 O·CH 2 Cl 2 , (Ln = Ce) (CeL 5 -α), K 2 [Ln(OPS(OEt) 2 ) 5 (H 2 O) 2 ]·H 2 O·CH 2 Cl 2 , (Ln = Pr) (PrL 5 -β), K[Ln(OPS(OEt) 2 ) 4 (H 2 O) 3 ], (Ln = Pr, Sm-Er) (ML 4 ), and K 3 [Ln(OPS(OEt) 2 ) 6 ], (Ln = Dy) (DyL 6 ) were synthesized and characterized using single-crystal X-ray diffraction and optical spectroscopy. Although the lanthanides contract in a nearly linear fashion, the structural changes observed as the f-block is traversed in these compounds are not necessarily a hard line but more so a blend of different structure types possible for each f-element. Furthermore, comparison of the Ln−O bond lengths shows a nearly linear contraction, but the Ln−S bond lengths do not monotonically decrease because of the hard Lewis acidity of the Ln 3+ cations.

37 - INORGANIC, ORGANIC, PHYSICAL AND ANALYTICAL C↗