Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “observation geometry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Generation of Land Surface Reflectance with Combined Geo-KOMPSAT-2A AMI and Himawari 8 AHI Observations

The latest generation of geostationary satellites has opened a new era of Earth observations with unprecedented spatiotemporal resolution and spectral range. Together with GOES 16/17 ABI, FY4-A AGRI, and Himawari-8 AHI, a new Korean geostationary satellite (Geo-KOMPSAT-2A AMI) has operationally collected a full-disk image in 16 channels every ten minutes since July 2019, allowing diurnal land surface monitoring over a large proportion of Asia and all of Oceania. Retrieving accurate surface reflectance (SR) over land from GK-2A/AMI is a challenging but high priority objective. One of the challenges is the absence of a spectral band in the 2.2 m SWIR range from AMI, which is required by many atmospheric correction algorithms to retrieve atmospheric aerosol properties. To remedy this issue, we adopt a strategy that combines concurrent GK-2A/AMI and Himawari 8/AHI observations in order to derive AMI SR. We have adapted the NASA Multi-Angle Implementation of Atmospheric Correction (MAIAC) algorithm to process the data stream from Himawari 8/AHI. The advantages of the MAIAC algorithm is its capability to exploit the high temporal frequency and varying illumination geometry of the geostationary data for advanced cloud/snow detection, aerosol retrieval, and characterization of surface bidirectional reflectance properties. Leveraging the similarities of spectral bands and the sun-target-sensor geometry between AMI and AHI, we are able to create denser time series of observations and enhanced BRDF samples over most of the spatial coverage of AMI (and AHI). The combined stereo-type observations not only help derive SR for AMI but also enhance retrievals of the corresponding AHI surface products. We evaluate the resulting AMI SR using ground (AERONET) observations and corresponding MODIS products. Further, we discuss potential challenges in utilizing the geostationary satellite data for land surface monitoring.

geostationary satellite↗
NASA NTRS2022

The Long-stable Hard State of XTE J1752-223 and the Disk Truncation Dilemma

The degree to which the thin accretion disks of black hole X-ray binaries are truncated during hard spectral states remains a contentious open question in black hole astrophysics. During its singular observed outburst in 2009–2010, the black hole X-ray binary XTE J1752−223 spent ∼1 month in a long-stable hard spectral state at a luminosity of ∼0.02–0.1 L Edd . It was observed with 56 RXTE pointings during this period, with simultaneous Swift-XRT daily coverage during the first 10 days of the RXTE observations. While reflection modeling has been extensively explored in the analysis of these data, there is disagreement surrounding the geometry of the accretion disk and corona implied by the reflection features. We reexamine the combined, high signal-to-noise, simultaneous Swift and RXTE observations, and perform extensive reflection modeling with the latest relxill suite of reflection models, including newer high disk density models. We show that reflection modeling requires that the disk be within ∼5 R ISCO during the hard spectral state, while weaker constraints from the thermal disk emission imply higher truncation (Rin = 6–80 R ISCO ). We also explore more complex coronal continuum models, allowing for two Comptonization components instead of one, and show that the reflection features still require only a mildly truncated disk. Finally we present a full comparison of our results to previous constraints found from analyses of the same data set.

Accretion↗
NASA NTRS1992

Experimental investigation of the effects of aft blowing with various nozzle exit geometries on a 3.0 caliber tangent ogive at high angles of attack: Forebody pressure distributions

An experimental study of the effects of aft blowing on the asymmetric vortex flow of a slender, axisymmetric body at high angles of attack was conducted. A 3.0 caliber tangent ogive body fitted with a cylindrical afterbody was tested in a wind tunnel under subsonic, laminar flow test conditions. Asymmetric blowing from both a single nozzle and a double nozzle configuration, positioned near the body apex, was studied. Aft blowing was observed to alter the vortex asymmetry by moving the blowing-side vortex closer to the body surface while moving the non-blowing-side vortex further away from the body. The effect of increasing the blowing coefficient was to move the blowing-side vortex closer to the body surface at a more upstream location. The data also showed that blowing was more effective in altering the initial vortex asymmetry at the higher angles of attack than at the lower. The effects of changing the nozzle exit geometry were studied and it was observed that blowing from a nozzle with a low, broad exit geometry was more effective in reducing the vortex asymmetry than blowing from a high, narrow exit geometry.

Chokani, Ndaona↗
NASA NTRS1990

Airborne/spaceborne radar - Panel report

Mobile radar platforms can provide unique observations of geophysical phenomena for scientific research and for operational applications such as reconnaissance and flight safety. Airborne or spaceborne radar can provide: (1) observations where it is often impractical or too costly to place a ground-based radar, (2) surveillance over a large area or over a long time period when the system of interest is moving, (3) the ability to adjust viewing angles to minimize uncertainties due to viewing geometry, for example, along a dual-Doppler baseline, (4) measurements to complement coincident observations from other remote and in situ sensors, and (5) evaluation of ground surface properties and their impact on the evolution of the boundary-layer and their role in storm systems, hydrology, and earth surface radiation balance. However, advances in signal processing, antenna design, power amplifiers, and other critical system components will be required if radar measurements from airborne and spaceborne platforms are to become a reality.

Jorgensen, David P.↗
NASA NTRS1996

Shape deformation of the organ of Corti associated with length changes of outer hair cell

Cochlear outer hair cells (OHC) are commonly assumed to function as mechanical effectors as well as sensory receptors in the organ of Corti (OC) of the inner ear. OHC in vitro and in organ explants exhibit mechanical responses to electrical, chemical or mechanical stimulation which may represent an aspect of their effector process that is expected in vivo. A detailed description, however, of an OHC effector operation in situ is still missing. Specifically, little is known as to how OHC movements influence the geometry of the OC in situ. Previous work has demonstrated that the motility of isolated OHCs in response to electrical stimulation and to K(+)-gluconate is probably under voltage control and causes depolarisation (shortening) and hyperpolarization (elongation). This work was undertaken to investigate if the movements that were observed in isolated OHC, and which are induced by ionic stimulation, could change the geometry of the OC. A synchronized depolarization of OHC was induced in guinea pig cochleae by exposing the entire OC to artificial endolymph (K+). Subsequent morphometry of mid-modiolar sections from these cochleae revealed that the distance between the basilar membrane (BM) and the reticular lamina (RL) had decreased considerably. Furthermore, in the three upper turns OHC had significantly shortened in all rows. The results suggest that OHC can change their length in the organ of Corti (OC) thus deforming the geometry of the OC. The experiments reveal a tonic force generation within the OC that may change the position of RL and/or BM, contribute to damping, modulate the BM-RL-distance and control the operating points of RL and sensory hair bundles. Thus, the results suggest active self-adjustments of cochlear mechanics by slow OHC length changes. Such mechanical adjustments have recently been postulated to correspond to timing elements of animal communication, speech or music.

Non-NASA Center↗
NASA NTRS1999

MHD Streamer Structure, Slow Solar Wind, and the Streamer Brightness Boundary

Flow tubes adjacent to closed magnetic field lines on the boundaries of streamers can have extremely large geometric spreading factors. Numerical models in this thin layer are subject to grid definition uncertainties. Therefore, we compute flow tube geometry using the analytic model of streamer structure described by Pneuman. This model has been found to be more widely applicable than commonly believed as a consequence of observations made with SOHO/UVCS and YOKHOH/SXT. We use the model to compute the radial dependence of flow tube geometry (the "spreading factors") for several different streamer models. The results are used to analyze the hypothesis that extremely slow flows in these open flow tubes may cause high densities relative to adjacent coronal hole flow. Such high density could mean that the streamer brightness boundary is defined by the open flow tubes adjacent to streamers rather than closed field lines.

Suess, Steven T.↗
NASA NTRS1976

The ion optics of a two grid electron-bombardment thruster

A detailed experimental investigation has been performed to determine the ion beam divergence of an electron-bombardment ion thruster as a function of grid geometry changes. The results show that, to a good approximation, each geometrical grid parameter independently affects one aspect of grid set performance. These observations are used to develop a graphical technique for predicting the ion beam divergence of an arbitrary ion source and grid geometry combination. The usefulness of this technique is demonstrated by comparing predicted ion beam divergence of the 30-cm diameter Engineering Model ion thruster with independent experimental determinations. Good agreement is shown between predicted and experimental results.

Aston, G.↗
NASA NTRS1974

Forced-convection peak heat flux on cylindrical heaters in water and refrigerant 113

An investigation was conducted of the peak heat flux on cylindrical heaters in a fluid flowing perpendicular to the major axis of the heater. The test fluids were water and Refrigerant 113. Heaters of 0.049 to 0.181 cm diameter were tested over a fluid velocity range of 10.1 to 81.1 cm/sec. The experimental results were observed to fall within two regions based on the vapor removal geometry: jets or sheets. Mathematical models for each region successfully correlated the data for both fluids.

Cochran, T. H.↗
NASA NTRS1979

Influence of coolant tube curvature on film cooling effectiveness as detected by infrared imagery

Thermal film cooling footprints observed by infrared imagery from straight, curved, and looped coolant tube geometries are compared. It was hypothesized that the differences in secondary flow and in the turbulence structure of flow through these three tubes should influence the mixing properties between the coolant and the main stream. A flow visualization tunnel, an infrared camera and detector, and a Hilsch tube were employed to test the hypothesis.

Papell, S. S.↗
NASA NTRS1979

Coolant tube curvature effects on film cooling as detected by infrared imagery

Reported herein are comparative thermal film cooling footprints observed by infrared imagery from straight, curved and looped coolant tube geometries. It was hypothesized that the difference in secondary flow and turbulence structure of flow through these three tubes should influence the mixing properties between the coolant and mainstream. The coolant was injected across an adiabatic plate through a hole angled at 30 deg to the surface in line with the free stream flow. The data cover a range of blowing rates from 0.37 to 1.25 (mass flow per unit area of coolant divided by free stream). Average temperature difference between coolant and tunnel air was 25 C. Data comparisons confirmed that coolant tube curvature significantly influences film cooling effectiveness.

Papell, S. S.↗
NASA NTRS1982

Variation of directional reflectance factors with structural changes of a developing alfalfa canopy

Directional reflectance factors of an alfalfa canopy were determined and related to canopy structure, agronomic variables, and irradiance conditions at four periods during a cutting cycle. Nadir and off-nadir reflectance factors decreased with increasing biomass in Thematic Mapper band 3(0.63-0.69 micrometer) and increased with increasing biomass in band 4(0.76-0.90 micrometer). The sensor view angle had less impact on perceived reflectance as the alfalfa progressed from an erectophile canopy of stems after harvest to a near planophile canopy of leaves at maturity. Studies of directional reflectance are needed for testing and upgrading vegetation canopy models and to aid in the complex interpretation problems presented by aircraft scanners and pointable satellites where illumination and viewing geometries may vary widely. Distinct changes in the patterns of radiance observed by a sensor as structural and biomass changes occur are keys to monitoring the growth and condition of crops.

Kirchner, J. A.↗
NASA NTRS1984

Remote Sensing of Earth Terrain

Theoretical models that are useful and practical in relating remote sensing data to the important physical parameters characterizing Earth terrain are developed. The development of models that are useful in data analysis and interpretation, scene simulation, and developing new remote sensing approaches and techniques is discussed. Numerous theoretical models that are applicable to the active and passive remote sensing of plowed fields, atmospheric precipitation, vegetation, and snow fields were developed. The radiative transfer theory is used to interpret the active and passive data as a function of rain rate. Both the random medium model and the discrete scatterer model is used to study the remote sensing of vegetation fields. Due to the non-spherical geometry of the scatterers there is strong azimuthal dependence in the observed data. Thus, the anisotropic random medium model and the discrete scatterer model with nonspherical particles was developed. In order to relate the remote sensing data to the actual physical parameters, the scattering of electromagnetic waves from randomly distributed dielectric scatterers was studied. Both the rigorous random discrete scatterer theory and the strong fluctuation theory are used to derive the backscattering cross section in terms of the actual physical parameters and the results agree well with the data obtained from the snow fields.

Kong, J. A.↗
NASA NTRS1987

Constraints for models of Be stars derived from UV and IRAS observations

The effect of different geometrical models (disk and circumstellar shell) on the mass loss determinations of Be stars is investigated. The characteristics of the disk and circumstellar shell models are described. The models are applied to the analysis of the column density derived from the UV lines and emission measurements derived from IRAS observations of 10 Be stars, and the mass loss rate for these stars are calculated. It is observed that the mass loss rates obtained from the circumstellar shell model are a factor of 0.01 smaller than those of the disk model; the mass of the IR emitting region is three times larger in the shell model than that in the disk model; and the radial outflow velocity of the IR emitting region for the shell model is of the order of 0.01 km/sec and for the disk model of the order of 10 km/sec. It is noted that the UV and IRAS observations can be analyzed using the two models if the proper geometry is considered.

Lamers, H. J. G. L. M.↗
NASA NTRS1988

High resolution microwave and X-ray observations of solar flares

This paper presents an analysis of high spatial resolution observations of 18 weak flares, carried out during the Solar Maximum Year in the microwave range, H-alpha, and soft X-rays, together with observations of the associated hard X-ray emission and the photospheric magnetic field. This combination of observations made it possible to obtain a picture of the flare geometry and the relative position of the various emissions, to study the change of the geometry during the flare, to estimate the electron temperature and emission measure of the thermal plasma, and to compute the contribution of the free-free process in the microwave emission. Results are interpreted as evidence for the presence of energetic electrons even in the post-burst phase of some flares. There was also found a clear case of homologous radio and X-ray bursts, one case of foot-point expansion with a relative velocity of 20 km/s at 6.16 cm, as well as some evidence of triggering of flares by disturbances moving with a velocity of 5000-13,000 km/s.

Alissandrakis, C. E.↗
NASA NTRS1990

A space-based concept for a collision warning sensor

This paper describes a concept for a space-based collision warning sensor experiment, the Debris Collision Warning Sensor (DCWS) experiment, in which the sensor will rely on passive sensing of debris in optical and IR passband. The DCWS experiment will be carried out under various conditions of solar phase angle and pass geometry; debris from 1.5 m to 1 mm diam will be observable. The mission characteristics include inclination in the 55-60 deg range and an altitude of about 500 km. The results of the DCWS experiment will be used to generate collision warning scenarios for the Space Station Freedom.

Talent, David L.↗
NASA NTRS1992

The albedos of Pluto and Charon - Wavelength dependence

The March 3, 1987 occultation of Charon by Pluto was monitored simultaneously with three telescopes. Each site covered a distinct wavelength interval with the total range spanning 0.44-2.4 microns. Observing the same event ensures an identical sun-Pluto-earth geometry for all three sites, and minimizes the assumptions which must be made to combine results. This spectrophotometry is used to derive the individual geometric albedos of Pluto and Charon over a factor of at least 5 in wavelength. Combining the results with those of Binzel (1988) improved (B - V) color estimates (on the 'Johnson Pluto' system) are obtained for the components of the system at rotational phase 0.75: (Pluto + Charon) = 0.843 +/- 0.006; Pluto alone = 0.866 +/- 0.007; and Charon alone = 0.702 +/- 0.010.

Marcialis, Robert L.↗
NASA NTRS1993

Enhanced mixing of a rectangular supersonic jet by natural and induced screech

The influence of shear layer excitation on the mixing of supersonic rectangular jets was studied experimentally. Two methods of excitation were used to control the jet mixing. The first used the natural screech of an underexpanded supersonic jet from a converging nozzle. The level of the screech excitation was controlled by the use of a pair of baffles located to block the acoustic feedback path between the downstream shock structure and the nozzle lip. A screech level variation of over 30 decibels was achieved and the mixing was completely determined by the level of screech attained at the nozzle lip. The second form of self-excitation used the induced screech caused by obstacles or paddles located in the shear layers on either long side of the rectangular jet. With sufficient immersion of the paddles intense jet mixing occurred and large flapping wave motion was observed using a strobed focused Schlieren system. Each paddle was instrumented with a total pressure tap and strain gages to determine the pressure and drag force on the square cross-section paddle. Considerable drag was observed in this initial exploratory study. Future studies using alternate paddle geometries will be conducted to maximize jet mixing with minimum drag.

Rice, Edward J.↗
NASA NTRS1994

Scaling of energy absorbing composite plates

The energy absorption response and crushing characteristics of geometrically scaled graphite-Kevlar epoxy composite plates were investigated. Two different trigger mechanisms including notch, and steeple geometries were incorporated into the plate specimens to initiate crushing. Sustained crushing was achieved with a new test fixture which provided lateral support to prevent global buckling. Values of specific sustained crushing stress (SSCS) were obtained which were lower than values reported for tube specimens from previously published data. Two sizes of hybrid plates were fabricated; a baseline or model plate, and a full-scale plate with inplane dimensions scaled by a factor of two. The thickness dimension of the full-scale plates was increased using two different techniques: the ply-level method in which each ply orientation in the baseline laminate stacking sequence is doubled, and the sublaminate technique in which the baseline laminate stacking sequence is repeated as a group. Results indicated that the SSCS has a small dependence on trigger mechanism geometry. However, a reduction in the SSCS of 10-25% was observed for the full-scale plates as compared with the baseline specimens, indicating a scaling effect in the crushing response.

Jackson, Karen↗