Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “nuclear interactions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Imaging studies of comets

The Joint Observatory for Cometary Research's (JOCR) historical mission has been to provide understanding of large-scale interactions between bright comets and solar wind using wide-angle (Schmidt) imagery and spacecraft data; in this pursuit the JOCR has excelled. The 16 inch Newtonian/Cassegrain telescope was upgraded to permit filtered, narrow-field charge coupled device (CCD) imaging of both bright and faint comets. Thus, the goal of obtaining narrow-band imagery of the near-nuclear region of bright comets was added to JOCR's original mission with emphasis on ionization processes and total gas production. A 300 mm lens/CCD system exists with 3 degree field of view (FOV) which uses comet filters; this system bridges the gap between the wide-field (8 x 10 deg) Schmidt plates and the several-arcmin. field of the 16 inch telescope. JOCR is located under dark skies on South Baldy Mountain (el. 10,600 ft.) near Socorro, NM, and is one of the last truly dark sites in the continental U.S.

Niedner, Malcolm B., Jr.↗
NASA NTRS1995

Shapes and stability of algebraic nuclear models

A generalization of the procedure to study shapes and stability of algebraic nuclear models introduced by Gilmore is presented. One calculates the expectation value of the Hamiltonian with respect to the coherent states of the algebraic structure of the system. Then equilibrium configurations of the resulting energy surface, which depends in general on state variables and a set of parameters, are classified through the Catastrophe theory. For one- and two-body interactions in the Hamiltonian of the interacting Boson model-1, the critical points are organized through the Cusp catastrophe. As an example, we apply this Separatrix to describe the energy surfaces associated to the Rutenium and Samarium isotopes.

Lopez-Moreno, Enrique↗
NASA NTRS2015

Human Systems Integration (HSI) Practitioner's Guide

The NASA/SP-2015-3709, Human Systems Integration (HSI) Practitioner's Guide, also known as the "HSIPG," provides a tool for implementing HSI activities within the NASA systems engineering framework. The HSIPG is written to aid the HSI practitioner engaged in a program or project (P/P), and serves as a knowledge base to allow the practitioner to step into an HSI lead or team member role for NASA missions. Additionally, this HSIPG is written to address the role of HSI in the P/P management and systems engineering communities and aid their understanding of the value added by incorporating good HSI practices into their programs and projects. Through helping to build a community of knowledgeable HSI practitioners, this document also hopes to build advocacy across the Agency for establishing strong, consistent HSI policies and practices. Human Systems Integration (HSI) has been successfully adopted (and adapted) by several federal agencies-most notably the U.S. Department of Defense (DoD) and the Nuclear Regulatory Commission (NRC)-as a methodology for reducing system life cycle costs (LCCs). These cost savings manifest themselves due to reductions in required numbers of personnel, the practice of human-centered design, decreased reliance on specialized skills for operations, shortened training time, efficient logistics and maintenance, and fewer safety-related risks and mishaps due to unintended human/system interactions. The HSI process for NASA establishes how cost savings and mission success can be realized through systems engineering. Every program or project has unique attributes. This HSIPG is not intended to provide one-size-fits-all recommendations for HSI implementation. Rather, HSI processes should be tailored to the size, scope, and goals of individual situations. The instructions and processes identified here are best used as a starting point for implementing human-centered system concepts and designs across programs and projects of varying types, including manned and unmanned, human spaceflight, aviation, robotics, and environmental science missions. The practitioner using this guide should have expertise in Systems Engineering or other disciplines involved in producing systems with anticipated human interactions. (See section 1.6 of this guide for further discussion on HSI discipline domains.) The HSIPG provides an "HSI layer" to the NASA Systems Engineering Engine (SEE), detailed in NASA Procedural Requirement (NPR) 7123.1B, NASA Systems Engineering Processes and Requirements, and further explained in NASA/SP-2007-6105, Systems Engineering Handbook (see HSIPG Table 2.2-1, NASA Documents with HSI Content, for specific references and document versions).

Zumbado, Jennifer Rochlis↗
NASA NTRS1996

Investigation of Natural and Man-Made Radiation Effects on Crews on Long Duration Space Missions

Over the past several years, NASA has studied a variety of mission scenarios designed to establish a permanent human presence on the surface of Mars. Nuclear electric propulsion (NEP) is one of the possible elements in this program. During the initial stages of vehicle design work, careful consideration must be given to not only the shielding requirements of natural space radiation, but to the shielding and configuration requirements of the on-board reactors. In this work, the radiation transport code MCNP has been used to make initial estimates of crew exposures to reactor radiation fields for a specific manned NEP vehicle design. In this design, three 25 MW(sub th), scaled SP-100-class reactors are shielded by three identical shields. Each shield has layers of beryllium, tungsten, and lithium hydride between the reactor and the crew compartment. Separate calculations are made of both the exiting neutron and gamma fluxes from the reactors during beginning-of-life, full-power operation. This data is then used as the source terms for particle transport in MCNP. The total gamma and neutron fluxes exiting the reactor shields are recorded and separate transport calculations are then performed for a 10 g/sq cm crew compartment aluminum thickness. Estimates of crew exposures have been assessed for various thicknesses of the shield tungsten and lithium hydride layers. A minimal tungsten thickness of 20 cm is required to shield the reactor photons below the 0.05 Sv/y man-made radiation limit. In addition to a 20-cm thick tungsten layer, a 40-cm thick lithium hydride layer is required to shield the reactor neutrons below the annual limit. If the tungsten layer is 30-cm thick, the lithium hydride layer should be at least 30-cm thick. These estimates do not take into account the photons generated by neutron interactions inside the shield because the MCNP neutron cross sections did not allow reliable estimates of photon production in these materials. These results, along with natural space radiation shielding estimates calculated by NASA Langley Research Center, have been used to provide preliminary input data into a new Macintosh-based software tool. A skeletal version of this tool being developed will allow rapid radiation exposure and risk analyses to be performed on a variety of Lunar and Mars missions utilizing nuclear-powered vehicles.

Bolch, Wesley E.↗
NASA NTRS1978

Surface waves generated by shallow underwater explosions

Surface water waves generated by surface and near surface point explosions are calculated. Taking the impulse distribution imparted at the water surface by the explosion as the overriding mechanism for transferring energy of the explosive to surface wave motion, the linearized theory of Kranzer and Keller is used to obtain the wave displacement in the far field. The impulse distribution is obtained by integrating the pressure wave over an appropriate time interval on a horizontal surface just beneath the undisturbed water surface. For surface explosions, a modified form of the similarity method first used by Collins and Holt is used to obtain the flow field. In the case of submerged explosions, the flow field is estimated by making necessary modifications to Sedov's similarity solution to account for the venting that accompanies the interaction of the leading (blast) wave with the ocean surface. Surface waves generated by a charge at six depths of placement (0.15 m, 0.30 m, 0.61 m, 0.91 m, 1.37 m, 3.05 m) are considered in addition to surface explosions. The results seem to support the existence of an upper critical depth phenomenon (of the type already established for chemical explosions) for point (nuclear) explosions.

Falade, A.↗
NASA NTRS2024

DNA Break Clustering as a Predictor of Cell Death across Various Radiation Qualities: Influence of Cell Size, Cell Asymmetry, and Beam Orientation

Cosmic radiation, composed of high charge and energy (HZE) particles, causes cellular DNA damage that can result in cell death or mutation that can evolve into cancer. In this work, a cell death model is applied to several cell lines exposed to HZE ions spanning a broad range of linear energy transfer (LET) values. We hypothesize that chromatin movement leads to the clustering of multiple double strand breaks (DSB) within one radiation-induced foci (RIF). The survival probability of a cell population is determined by averaging the survival probabilities of individual cells, which is function of the number of pairwise DSB interactions within RIF. The simulation code RITCARD was used to compute DSB. Two clustering approaches were applied to determine the number of RIF per cell. RITCARD outputs were combined with experimental data from four normal human cell lines to derive the model parameters and expand its predictions in response to ions with LET ranging from ∼0.2keV/μmto∼3000keV/μm. Spherical and ellipsoidal nuclear shapes and two ion beam orientations were modeled to assess the impact of geometrical properties on cell death. The calculated average number of RIF per cell reproduces the saturation trend for high doses and high-LET values that is usually experimentally observed. The cell survival model generates the recognizable bell shape of LET dependence for the relative biological effectiveness (RBE). At low LET, smaller nuclei have lower survival due to increased DNA density and DSB clustering. At high LET, nuclei with a smaller irradiation area either because of a smaller size or a change in beam orientation have a higher survival rate due to a change in the distribution of DSB/RIF per cell. If confirmed experimentally, the geometric characteristics of cells would become a significant factor in predicting radiation-induced biological effects.

cell survival↗
NASA NTRS1982

Potential Role of Land Use and Land Cover Information in Powerplant Siting: Example of Three Mile Island

Selecting a site for a nuclear powerplant can be helped by digitizing land use and land cover data, population data, and other pertinent data sets, and then placing them in a geographic information system. Such a system begins with a set of standardized maps for location reference and then provides for retrieval and analysis of spatial data keyed to the maps. This makes possible thematic mapping by computer, or interactive visual display for decisionmaking. It also permits correlating land use area measurements with census and other data (such as fallout dosages), and the updating of all data sets. The system is thus a tool for dealing with resource management problems and for analyzing the interaction between people and their environment. An explanation of a computer-plotted map of land use and cover for Three Mile Island and vicinity is given.

Wray, J. R.↗
NASA NTRS1993

On structuring the rules of a fuzzy controller

Since the pioneering work of Zadeh and Mamdani and Assilian, fuzzy logic control has emerged as one of the most active and fruitful research areas. The applications of fuzzy logic control can be found in many fields such as control of stream generators, automatic train operation systems, elevator control, nuclear reactor control, automobile transmission control, etc. In this paper, two new structures of hierarchical fuzzy rule-based controller are proposed to reduce the number of rules in a complete rule set of a controller. In one approach, the overall system is split into sub-systems which are treated independently in parallel. A coordinator is then used to take into account the interactions. This is done via an iterating information exchange between the lower level and the coordinator level. From the point of view of information used, this structure is very similar to central structure in that the coordinator can have at least in principle, all the information that the local controllers have.

Zhou, Jun↗
NASA NTRS2011

Facility Targeting, Protection and Mission Decision Making Using the VISAC Code

The Visual Interactive Site Analysis Code (VISAC) has been used by DTRA and several other agencies to aid in targeting facilities and to predict the associated collateral effects for the go, no go mission decision making process. VISAC integrates the three concepts of target geometric modeling, damage assessment capabilities, and an event/fault tree methodology for evaluating accident/incident consequences. It can analyze a variety of accidents/incidents at nuclear or industrial facilities, ranging from simple component sabotage to an attack with military or terrorist weapons. For nuclear facilities, VISAC predicts the facility damage, estimated downtime, amount and timing of any radionuclides released. Used in conjunction with DTRA's HPAC code, VISAC also can analyze transport and dispersion of the radionuclides, levels of contamination of the surrounding area, and the population at risk. VISAC has also been used by the NRC to aid in the development of protective measures for nuclear facilities that may be subjected to attacks by car/truck bombs.

Morris, Robert H.↗
NASA NTRS1987

Nuclear processes and accelerated particles in solar flares

Nuclear processes and particle acceleration in solar flares are reviewed. The theory of gamma-ray and neutron production is discussed and results of calculations are compared to gamma-ray, neutron, and charged-particle observations from solar flares. The implications of these comparisons on particle energy spectra, total numbers, anisotropies, electron-to-proton ratios, as well as on acceleration mechanisms and the interaction site, are presented. The information on elemental and isotopic abundances derived from gamma-ray observations is compared to abundances obtained from escaping accelerated particles and other sources.

Ramaty, R.↗
NASA NTRS1993

An H-alpha survey of cluster spirals - Comparison of star formation in clusters and the field

In an objective prism survey of eight nearby Abell clusters, we have detected H-alpha emission from 77 out of a total of 201 CGCG spiral galaxies. We find that detection of H alpha emission is approximately independent of galaxy absolute magnitude, distance to the cluster center, and the presence of a bar. However, tidally distorted spirals are much more likely to be detected than undistorted spirals. Furthermore, there is a strong tendency for tidally distorted spirals to have compact nuclear emission rather than more extended disk-wide emission. When compared to field spirals, we find that late-type (Sc and Sc-Irr) cluster spirals have less H alpha emission, while early-type (Sa and Sab) cluster spirals can have significantly enhanced emission. The enhanced emission is most likely to be due to tidally induced star formation from galaxy-galaxy interactions.

Moss, C.↗
NASA NTRS2010

Optimized O'Neill/Glaser Model for Human Population of Space and its Impact on Survival Probabilities

Two contemporary issues foretell a shift from our historical Earth based industrial economy and habitation to a solar system based society. The first is the limits to Earth's carrying capacity, that is the maximum number of people that the Earth can support before a catastrophic impact to the health of the planet and human species occurs. The simple example of carrying capacity is that of a bacterial colony in a Petri dish with a limited amount of nutrient. The colony experiences exponential population growth until the carrying capacity is reached after which catastrophic depopulation often results. Estimates of the Earth s carrying capacity vary between 14 and 40 billion people. Although at current population growth rates we may have over a century before we reach Earth s carrying limit our influence on climate and resources on the planetary scale is becoming scientifically established. The second issue is the exponential growth of knowledge and technological power. The exponential growth of technology interacts with the exponential growth of population in a manner that is unique to a highly intelligent species. Thus, the predicted consequences (world famines etc.) of the limits to growth have been largely avoided due to technological advances. However, at the mid twentieth century a critical coincidence occurred in these two trends humanity obtained the technological ability to extinguish life on the planetary scale (by nuclear, chemical, biological means) and attained the ability to expand human life beyond Earth. This paper examines an optimized O Neill/Glaser model (O Neill 1975; Curreri 2007; Detweiler and Curreri 2008) for the economic human population of space. Critical to this model is the utilization of extraterrestrial resources, solar power and spaced based labor. A simple statistical analysis is then performed which predicts the robustness of a single planet based technological society versus that of multiple world (independent habitats) society.

Curreri, Peter A.↗
NASA NTRS2010

Optimized O'Neill/Glaser Model for Human Population of Space and its Impact on Survival Probabilities

Two contemporary issues foretell a shift from our historical Earth based industrial economy and habitation to a solar system based society. The first is the limits to Earth s carrying capacity, that is the maximum number of people that the Earth can support before a catastrophic impact to the health of the planet and human species occurs. The simple example of carrying capacity is that of a bacterial colony in a Petri dish with a limited amount of nutrient. The colony experiences exponential population growth until the carrying capacity is reached after which catastrophic depopulation often results. Estimates of the Earth s carrying capacity vary between 14 and 40 billion people. Although at current population growth rates we may have over a century before we reach Earth s carrying limit our influence on climate and resources on the planetary scale is becoming scientifically established. The second issue is the exponential growth of knowledge and technological power. The exponential growth of technology interacts with the exponential growth of population in a manner that is unique to a highly intelligent species. Thus, the predicted consequences (world famines etc.) of the limits to growth have been largely avoided due to technological advances. However, at the mid twentieth century a critical coincidence occurred in these two trends humanity obtained the technological ability to extinguish life on the planetary scale (by nuclear, chemical, biological means) and attained the ability to expand human life beyond Earth. This paper examines an optimized O Neill/Glaser model (O Neill 1975; Curreri 2007; Detweiler and Curreri 2008) for the economic human population of space. Critical to this model is the utilization of extraterrestrial resources, solar power and spaced based labor. A simple statistical analysis is then performed which predicts the robustness of a single planet based technological society versus that of multiple world (independent habitats) society.

Curreri, Peter A.↗
NASA NTRS2010

Optimized O'Neill/Glaser Model for Human Population of Space and its Impact on Survival Probabilities

Two contemporary issues foretell a shift from our historical Earth based industrial economy and habitation to a solar system based society. The first is the limits to Earth s carrying capacity, that is the maximum number of people that the Earth can support before a catastrophic impact to the health of the planet and human species occurs. The simple example of carrying capacity is that of a bacterial colony in a Petri dish with a limited amount of nutrient. The colony experiences exponential population growth until the carrying capacity is reached after which catastrophic depopulation often results. Estimates of the Earth s carrying capacity vary between 14 and 40 billion people. Although at current population growth rates we may have over a century before we reach Earth s carrying limit our influence on climate and resources on the planetary scale is becoming scientifically established. The second issue is the exponential growth of knowledge and technological power. The exponential growth of technology interacts with the exponential growth of population in a manner that is unique to a highly intelligent species. Thus, the predicted consequences (world famines etc.) of the limits to growth have been largely avoided due to technological advances. However, at the mid twentieth century a critical coincidence occurred in these two trends humanity obtained the technological ability to extinguish life on the planetary scale (by nuclear, chemical, biological means) and attained the ability to expand human life beyond Earth. This paper examines an optimized O'Neill/Glaser model (O Neill 1975; Curreri 2007; Detweiler and Curreri 2008) for the economic human population of space. Critical to this model is the utilization of extraterrestrial resources, solar power and spaced based labor. A simple statistical analysis is then performed which predicts the robustness of a single planet based technological society versus that of multiple world (independent habitats) society.

Curreri, Peter A.↗
NASA NTRS1981

Nuclear and particle physics in the early universe

Basic principles and implications of Big Bang cosmology are reviewed, noting the physical evidence of a previous universe temperature of 10,000 K and theoretical arguments such as grand unification decoupling indicating a primal temperature of 10 to the 15th eV. The Planck time of 10 to the -43rd sec after the Big Bang is set as the limit before which gravity was quantized and nothing is known. Gauge theories of elementary particle physics are reviewed for successful predictions of similarity in weak and electromagnetic interactions and quantum chromodynamic predictions for strong interactions. The large number of photons in the universe relative to the baryons is considered and the grand unified theories are cited as showing the existence of baryon nonconservation as an explanation. Further attention is given to quark-hadron phase transition, the decoupling for the weak interaction and relic neutrinos, and Big Bang nucleosynthesis.

Schramm, D. N.↗
NASA NTRS1991

Review of Rover fuel element protective coating development at Los Alamos

The Los Alamos Scientific Laboratory (LASL) entered the nuclear propulsion field in 1955 and began work on all aspects of a nuclear propulsion program with a target exhaust temperature of about 2750 K. A very extensive chemical vapor deposition coating technology for preventing catastrophic corrosion of reactor core components by the high temperature, high pressure hydrogen propellant gas was developed. Over the 17-year term of the program, more than 50,000 fuel elements were coated and evaluated. Advances in performance were achieved only through closely coupled interaction between the developing fuel element fabrication and protective coating technologies. The endurance of fuel elements in high temperature, high pressure hydrogen environment increased from several minutes at 2000 K exit gas temperature to 2 hours at 2440 K exit gas temperature in a reactor test and 10 hours at 2350 K exit gas temperature in a hot gas test. The purpose of this paper is to highlight the rationale for selection of coating materials used (NbC and ZrC), identify critical fuel element-coat interactions that had to be modified to increase system performance, and review the evolution of protective coating technology.

Wallace, Terry C.↗
NASA NTRS2018

The Fusion Driven Rocket: Nuclear Propulsion through Direct Conversion of Fusion Energy

The future of manned space exploration and development of space depends critically on the creation of a dramatically more efficient propulsion architecture for in-space transportation. A very persuasive reason for investigating the applicability of nuclear power in rockets is the vast energy density gain of nuclear fuel when compared to chemical combustion energy. The Fusion Driven rocket (FDR) represents a revolutionary approach to fusion propulsion where the power source releases its energy directly into the propellant, not requiring conversion to electricity. It employs a solid lithium propellant that requires no significant tankage mass. The propellant is rapidly heated and accelerated to high exhaust velocity (> 30 km/s), while having no substantial physical interaction with the spacecraft thereby avoiding damage to the rocket and limiting both the thermal heat load and radiator mass. The key to achieving this stems from research at MSNW and the UW on the magnetically driven implosion of metal foils onto a magnetized plasma target to obtain fusion conditions. A logical extension of this work leads to a method that utilizes these metal shells (or liners) to not only achieve fusion conditions, but to serve as the propellant as well. Several low-mass, magnetically driven metal liners are inductively driven to converge radially and axially and form a thick blanket surrounding the target plasmoid and compress the plasmoid to fusion conditions. Virtually all of the radiant, neutron and particle energy from the plasma is absorbed by the encapsulating, thick metal blanket thereby isolating the spacecraft from the fusion. This energy, in addition to the intense Ohmic heating at peak magnetic field compression, is adequate to vaporize and ionize the metal blanket. The expansion of this hot, ionized metal propellant through a magnetically insulated nozzle produces high thrust at the optimal Isp. The energy from the fusion process, along with the waste heat, is thus utilized at very high efficiency. The basic scheme for FDR is illustrated and described in the report (see Fig. 2) The two most critical issues in meeting challenges introduced employing magneto-inertial fusion as the power source is driver efficiency and “stand-off” – the ability to isolate and protect fusion and thruster from the resultant fusion energy. By employing metal shells for compression, it is possible to produce the desired convergent motion inductively by inserting the metal sheets along the inner surface of cylindrical or conically tapered coils. Both stand-off and energy efficiency issues are solved by this arrangement. 3 This two year effort focused on achieving three key criteria for the Fusion Driven Rocket to move forward for technological development: (1) the physics of the FDR must be fully understood and validated, (2) the design and technology development for the FDR required for its implementation in space must be fully characterized, and (3) an in-depth analysis of the rocket design and spacecraft integration as well as mission architectures enabled by the FDR need to be performed. A subscale, laboratory liner compression test facility was assembled at the University of Washington Plasma Dynamics Laboratory with sufficient liner kinetic energy (~ 0.5 MJ) to reach conditions required for fusion breakeven conditions. Detailed experimental studies of the dynamic behavior of the driven liners as well as liner convergence and magnetic compression were performed. The development of both the 1D liner dynamics code and the full 3D ANSYS® liner calculations was achieved. The characterization of both the FDR and spacecraft as well as a design architecture analysis was conducted that included an examination of a wide range of mission architectures and destinations for which this fusion propulsion system would be enabling or critical. In particular a rapid, single launch manned Mars mission was developed.

Energy↗
NASA NTRS1991

Automated technologies needed to prevent radioactive materials from reentering the atmosphere

Project SIREN (Search, Intercept, Retrieve, Expulsion Nuclear) was created to identify and evaluate the technologies and operational strategies needed to rendezvous with and capture aerospace radioactive materials (e.g., a distressed or spent space reactor core) before such materials can reenter the terrestrial atmosphere and then to safely move these captured materials to an acceptable space destination for proper disposal. A major component of the current project SIREN effort is the development of an interactive technology model (including a computerized data base) that explores, in building-block fashion, the interaction of the technologies and procedures needed to successfully accomplish a SIREN mission. The SIREN model will include appropriate national and international technology elements--both contemporary and projected into the next century. To obtain maximum flexibility and use, the SIREN technology data base is being programmed for use on 286-class PC's. The major technical elements for a successful SIREN mission include: ground and space-based tracking, launch vehicles of needed payload capacity, telerobotic systems, sensors, capture technologies, and space transport and disposal. However, Project SIREN also will impose specialized requirements including the use of dextrous aerospace systems capable of properly functioning in intense radiation and thermal environments.

Buden, David↗