SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The role of the existence and sufficiency conditions in the field of optimal control was briefly described. The existence theorems are discussed for general nonlinear systems. However, the sufficiency conditions pertain to "nearly" linear systems with integral convex costs. Moreover, a brief discussion of linear systems with multiple-cost functions is presented.
Generalized multistep methods for the numerical solution of nonlinear systems of ordinary differential equations are introduced which allow the correction of previously computed values of the solution at internal points of the grid. These methods are shown to possess enhanced numerical stability. Preliminary numerical results indicate that for some satellite orbit problems these methods also possess greater overall efficiency. A uniformly converging theory of error propagation is presented which is valid for nonasymptotic values of the step size. Experimental results are seen to conform with theory.
An extension of the Chahine relaxation method (1970) for inverting the radiative transfer equation is presented. This method is superior to the original method in that it takes into account in a realistic manner the shape of the kernel function, and its extension to nonlinear systems is much more straightforward. A comparison of the new method with a matrix method due to Twomey (1965), in a problem involving inference of vertical distribution of ozone from spectroscopic measurements in the near ultraviolet, indicates that in this situation this method is stable with errors in the input data up to 4%, whereas the matrix method breaks down at these levels. The problem of non-uniqueness of the solution, which is a property of the system of equations rather than of any particular algorithm for solving them, remains, although it takes on slightly different forms for the two algorithms.
The equations of planar motion for a flexible beam in orbit which includes the effects of gravity gradient torques and control torques from point actuators located along the beam was developed. Two classes of theorems are applied to the linearized form of these equations to establish necessary conditions for controlability for preselected actuator configurations. The feedback gains are selected: (1) based on the decoupling of the original coordinates and to obtain proper damping, and (2) by applying the linear regulator problem to the individual model coordinates separately. The linear control laws obtained using both techniques were evaluated by numerical integration of the nonlinear system equations. Numerical examples considering pitch and various number of modes with different combination of actuator numbers and locations are presented. The independent model control concept used earlier with a discretized model of the thin beam in orbit was reviewed for the case where the number of actuators is less than the number of modes. Results indicate that although the system is controllable it is not stable about the nominal (local vertical) orientation when the control is based on modal decoupling. An alternate control law not based on modal decoupling ensures stability of all the modes.
Undamped modes approximate dynamic behavior of rotors and bearings. Application of modal analysis to uncouple equations of motion simplifies stability, steady-state unbalance response, and transient response analysis of system; nonlinear stability is predicted from calculated frequency spectra. Analysis provides designers with complete information without involving large-scale computational costs. Programs are written in FORTRAN IV for use on CDC 6600 computer.
A model is developed which treats interplanetary structures as a small-scale incompressible Alfvenic fluctuation superposed on a large-scale background flow, and uses the complete magnetohydrodynamic equations and the full energy equation to describe the interplanetary structures. For steady-state corotating structures the model assumes the background flow to be field aligned, and the nonlinear system is treated as being composed of two subsets: one dealing with the expansion of the solar wind in stream tubes, the other with the interaction between neighboring stream tubes. The expansion subset has a singularity at Parker's critical radius, and the interaction subset has a singularity at the Alfvenic point. Concerning the region where the flow velocity is super-Alfvenic, the characteristic equation is derived, and a general method of numerical solution for the three-dimensional problems based on the characteristics theory is discussed. In addition, a viscous WKB solution of the microscale system is presented.
The effectiveness of using minimization techniques for the solution of nonlinear structural analysis problems is discussed and demonstrated by comparison with the conventional pseudo force technique. The comparison involves nonlinear problems with a relatively few degrees of freedom. A survey of the state-of-the-art of algorithms for unconstrained minimization reveals that extension of the technique to large scale nonlinear systems is possible.
The paper considers jump phenomena composed of large amplitude responses of nonlinear systems caused by small amplitude disturbances. Physical problems where large jumps in the solution amplitude are important features of the response are described, including snap buckling of elastic shells, chemical reactions leading to combustion and explosion, and long-term climatic changes of the earth's atmosphere. A new method of rational functions was then developed which consists of representing the solutions of the jump problems as rational functions of the small disturbance parameter; this method can solve jump problems explicitly.
An attempt to obtain a dynamic model for a turbofan gas turbine engine for the purpose of adaptive control is described. The requirements for adaptive control indicate that a dynamic model should be identified from data sampled during engine operation. The dynamic model identified was of the form of linear differential equations with time varying coefficients. A turbine engine is, however, a highly nonlinear system, so the identified model would be valid only over a small area near the operating point, thus requiring frequent updating of the coefficients in the model. Therefore it is necessary that the identifier use only recent information to perform its function. The identifier selected minimized the square of the equation errors. Known linear systems were used to test the characteristics of the identifier. It was found that the performance was dependent on the number of data points used in the computations and upon the time interval over which the data points were obtained. Preliminary results using an engine deck for the quiet, clean, shorthaul experimental engine indicate that the identified model predicts the engine motion well when there is sufficient dynamic information, that is when the engine is in transient operation.
A revised version of a split-velocity method for numerical calculation of compressible duct flow was developed. The revision incorporates balancing of mass flow rates on each marching step in order to maintain front-to-back continuity during the calculation. The (checkerboard) zebra algorithm is applied to solution of the three-dimensional continuity equation in conservative form. A second-order A-stable linear multistep method is employed in effecting a marching solution of the parabolized momentum equations. A checkerboard successive overrelaxation iteration is used to solve the resulting implicit nonlinear systems of finite-difference equations which govern stepwise transition.
The nonlinear modified equation approach is taken in this paper to analyze the generalized Lax-Wendroff explicit scheme approximation to the unsteady one- and two-dimensional equations of gas dynamics. Three important applications of the method are demonstrated. The nonlinear modified equation analysis is used to (1) generate higher order accurate schemes, (2) obtain more accurate estimates of the discretization error for nonlinear systems of partial differential equations, and (3) generate an adaptive mesh procedure for the unsteady gas dynamic equations. Results are obtained for all three areas. For the adaptive mesh procedure, mesh point requirements for equal resolution of discontinuities were reduced by a factor of five for a 1-D shock tube problem solved by the explicit MacCormack scheme.
A revised version of Dodge's split-velocity method for numerical calculation of compressible duct flow was developed. The revision incorporates balancing of mass flow rates on each marching step in order to maintain front-to-back continuity during the calculation. The (checkerboard) zebra algorithm is applied to solution of the three dimensional continuity equation in conservative form. A second-order A-stable linear multistep method is employed in effecting a marching solution of the parabolized momentum equations. A checkerboard iteration is used to solve the resulting implicit nonlinear systems of finite-difference equations which govern stepwise transition. Qualitive agreement with analytical predictions and experimental results was obtained for some flows with well-known solutions.
A demonstration that the four dimensional variational analysis method using the governing equations as exact constraints can be successfully employed for a perfect model and for a simple, but nonlinear, system is presented. The method is stable in an assimilation cycle. The method reconstructs the unobservable variables; in the case demonstrated, no velocity data was observed. The analysis errors are much smaller than the observing system errors.
Several topics arising in the finite element solution of the incompressible Navier-Stokes equations are considered. Specifically, the question of choosing finite element velocity/pressure spaces is addressed, particularly from the viewpoint of achieving stable discretizations leading to convergent pressure approximations. The role of artificial viscosity in viscous flow calculations is studied, emphasizing work by several researchers for the anisotropic case. The last section treats the problem of solving the nonlinear systems of equations which arise from the discretization. Time marching methods and classical iterative techniques, as well as some modifications are mentioned.
Nonlinearities within a synthetic aperture radar (SAR) present significant obstacles to the calibration of the output imagery. The problem of calibrating a SAR is considerably more involved than that of calibrating a real aperture radar (RAR) or scatterometer, since the SAR relies heavily on the principle of superposition, which fails in nonlinear systems. It is shown in this paper that non-linearities can distort SAR imagery to such an extent that two areas of equal backscatter on the ground can be imaged to have significantly different intensities in the image.
The effect of a geometric nonlinearity on the Ibrahim Time Domain (ITD) modal data analysis technique has been studied using two analytically derived models and one laboratory model. Response data for the three models were analyzed by the ITD method. Indicators of nonlinear response were found which include harmonically related frequencies with repetitive mode shapes, clusters of frequencies in a narrow band around each harmonic, and variations in frequency with amplitude of oscillation. Also,for the cases studied, the presence of a nonlinearity has no detrimental effect on identifying linear responses. A potential for applying the algorithm to the identification of a certain class of nonlinear system was indicated.
In the present investigation, the basic approach is employed to view an iterative scheme as Newton's method or as a modified Newton's method. Attention is given to various modified Newton methods which can arise from differencing schemes for the Euler equations. Flux vector splitting is considered as the basic spatial differencing technique. This technique is based on the partition of a flux vector into groups which have certain properties. The Euler equations fluxes can be split into two groups, the first group having a flux Jacobian with all positive eigenvalues, and the second group having a flux Jacobian with all negative eigenvalues. Flux vector splitting based on a velocity-sound speed split is considered along with the use of numerical techniques to analyze nonlinear systems, and the steady Euler equations for quasi-one-dimensional flow in a nozzle. Results are given for steady flows with shocks.
This paper considers several topics arising in the finite element solution of the incompressible Navier-Stokes equations. Specifically, the question of choosing finite element velocity/pressure spaces is addressed, particularly from the viewpoint of achieving stable discretizations leading to convergent pressure approximations. Following this, the role of artificial viscosity in viscous flow calculations is studied, emphasizing recent work by several researchers for the anisotropic case. The last section treats the problem of solving the nonlinear systems of equations which arise from the discretization. Time marching methods and classical iterative techniques, as well as some recent modifications are mentioned.