Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “nitrides”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Some Thermodynamic Features of Uranium–Plutonium Nitride Fuel in the Course of Burnup

Calculation studies on the effect of carbon and oxygen impurities on the chemical and phase compositions of nitride uranium–plutonium fuel in the course of burnup are performed using the IVTANTHERMO code. It is shown that the number of moles of UN decreases with increasing burnup level, whereas UN{sub 1.466}, UN{sub 1.54}, and UN{sub 1.73} exhibit a considerable increase. The presence of oxygen and carbon impurities causes an increase in the content of the UN{sub 1.466}, UN{sub 1.54} and UN{sub 1.73} phases in the initial fuel by several orders of magnitude, in particular, at a relatively low temperature. At the same time, the presence of impurities abruptly reduces the content of free uranium in unburned fuel. Plutonium in the considered system is contained in form of Pu, PuC, PuC{sub 2}, Pu{sub 2}C{sub 3}, and PuN. Plutonium carbides, as well as uranium carbides, are formed in small amounts. Most of the plutonium remains in the form of nitride PuN, whereas unbound Pu is present only in the areas with a low burnup level and high temperatures.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A study of vapor-phase deposition of silicon nitride layers by ammonolysis of dichlorosilane at lowered pressure

Deposition kinetics of silicon nitride layers at lowered reactor pressures of 10-130 Pa and temperatures in the range 973-1073 K has been studied. The equilibrium constant of the bimolecular reaction of dichlorosilane with ammonia has been calculated. The apparent activation energies calculated taking into account the experimental growth rate nearly coincide with the experimental data. Recommendations for improving the quality of silicon nitride layers are made.

36 MATERIALS SCIENCE↗

The effect of nitridation parameters and initial growth conditions on the polarity of GaN epitaxial layers grown by plasma-assisted molecular-beam epitaxy on Si(111) substrates

The dependence of the crystallographic polarity of GaN epitaxial layers produced by nitrogen plasma-enhanced molecular-beam epitaxy on Si(111) substrates on the nitridation parameters and initial growth conditions has been studied. A rapid procedure for determining the polarity of GaN epitaxial layers was developed. It was found experimentally that the nitridation parameters of the silicon substrate have no effect on the polarity of a GaN layer. It was shown that the substrate temperature in the stage of nucleation of a GaN epitaxial layer is one of the factors determining its polarity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis and Optimization of the Sintering Kinetics of Actinide Nitrides

Research conducted for this NERI project has advanced the understanding and feasibility of nitride nuclear fuel processing. In order to perform this research, necessary laboratory infrastructure was developed; including basic facilities and experimental equipment. Notable accomplishments from this project include: the synthesis of uranium, dysprosium, and cerium nitrides using a novel, low-cost mechanical method at room temperature; the synthesis of phase pure UN, DyN, and CeN using thermal methods; and the sintering of UN and (Ux, Dy1-x)N (0.7 ≤ X ≤ 1) pellets from phase pure powder that was synthesized in the Advanced Materials Laboratory at Boise State University.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Morphological development and oxidation mechanisms of aluminum nitride whiskers

Hexagonal aluminum nitride (AlN) whiskers have been synthesized at 1873 K under a flowing nitrogen atmosphere. The synthesized whiskers are long straight filaments with diameters between 1 and 5 {mu}m and length in the cm range. In order to investigate its 'oxidation resistance', a series of experiments have been performed. The oxidation behavior was quite different in the experimental temperature range assigned, which can be attributed to the kinetic factor and the morphological development during oxidation process. It was chemical controlled at lower temperature while both chemical reaction and diffusion controlled at medium temperature. Further accelerating of temperature to 1473 K, AlN whiskers was peeled into smaller parts, which increased the oxidation rate and hence showed powder-like oxidation behavior. Our new kinetic theory has been applied to study the oxidation behavior of AlN whiskers. The comparison of the experimental data with the theoretical ones validates the applicability of the new model. - Hexagonal aluminum nitride (AlN) whiskers have been synthesized at 1873 K under a flowing nitrogen atmosphere. The synthesized whiskers are long straight filaments with diameters between 1 and 5 {mu}m and length in the cm range.

36 MATERIALS SCIENCE↗

Synthesis of ThN using a Carbothermic Reduction to Nitridation Process

The thorium fuel cycle has several advantages when compared to the uranium fuel cycle. Not only is thorium more abundant than uranium, it also avoids many of the disadvantages which are inherent to the uranium fuel cycle. For example, the thorium fuel cycle does not result in significant formation of long lived, highly toxic transuranics that are inevitably formed in the uranium fuel cycle. The fissile U-233 that is created through neutron capture of Th-232 is also more proliferation resistant than the Pu-239 created from the uranium fuel cycle, because of the buildup of U-232, a source of extremely hazardous gamma emitters. Additionally, thermal reactors which utilize the thorium fuel cycle may be used to destroy transuranics through transmutation as opposed to the fast reactors that are typically required for the uranium fuel cycle. The result is that not only does the thorium fuel cycle avoid the production of transuranic actinides, it may also be used to destroy the inventory of these isotopes within existing reactors. The work presented here investigates the fabrication of ThN so that its properties may be studied to determine its feasibility as a nuclear fuel within a thorium fuel cycle. While both ThO{sub 2} and ThN have melt points higher than the metal, one of the potential advantages of using ThN instead of ThO{sub 2} is that it has a 28% higher fertile density. Additionally, previous investigations have suggested that ThN has substantially higher thermal conductivity when compared to ThO{sub 2} fuel. This suggests that if a (Th,U)N solid solution can be shown to behave similarly to (U,Pu)N, the nitride fuel form would possess a significant advantage over (Th,U)O{sub 2} which has poor thermal conductivity. A carbothermic reduction to nitridation (CTR-N) process has been utilized extensively at LANL for the production and study of UN, but this type of process has not been used for the fabrication of high purity ThN. The work presented here describes the development of a similar process which will be used to fabricate bulk ThN for subsequent experimental study. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Mechanochemical-Assisted Synthesis of High-Entropy Metal Nitride via a Soft Urea Strategy

Crystalline high-entropy ceramics (CHC), a new class of solids that contain five or more elemental species, have attracted increasing interest because of their unique structure and potential applications. Up to now, only a couple of CHCs (e.g., high-entropy metal oxides and diborides) have been successfully synthesized. In this paper, a new strategy for preparing high-entropy metal nitride (HEMN-1) is proposed via a soft urea method assisted by mechanochemical synthesis. The as-prepared HEMN-1 possesses five highly dispersed metal components, including V, Cr, Nb, Mo, Zr, and simultaneously exhibits an interesting cubic crystal structure of metal nitrides. By taking advantage of these unique features, HEMN-1 can function as a promising candidate for supercapacitor applications. A specific capacitance of 78 F g -1 is achieved at a scan rate of 100 mV s -1 in 1 m KOH. Finally, in addition, such a facile synthetic strategy can be further extended to the fabrication of other types of HEMNs, paving the way for the synthesis of HEMNs with attractive properties for task-specific applications.

36 MATERIALS SCIENCE↗

3D Hybrid Plasmonic Framework with Au Nanopillars Embedded in Nitride Multilayers Integrated on Si

Integration of nanoscale photonic and plasmonic components on Si substrates is a critical step toward Si-based integrated nanophotonic devices. Herein, a set of unique complex 3D metamaterials with intercalated nanolayered and nanopillar structures with tunable plasmonic and optical properties on Si substrates is designed. More specifically, the 3D metamaterials combine metal (Au) nanopillars and alternating metal-nitride (Au-TiN and Au-TaN) nanolayers, epitaxially grown on Si substrates. The ultrafine Au nanopillars ( d ≈ 3 nm) continuously grow throughout all the nanolayers with high epitaxial quality. Novel optical properties, such as highly anisotropic optical property, high absorbance covering the entire visible spectrum regime, and hyperbolic property in the visible regime, are demonstrated. Furthermore, a waveguide based on a silicon nitride (Si 3 N 4 ) ridge with a multilayer structure is successfully fabricated. The demonstration of 3D nanoscale metamaterial design integrated on Si opens up a new route toward tunable metamaterials nanostructure designs with versatile material selection for various optical components in Si integrated photonics.

36 MATERIALS SCIENCE↗

Boron Nitride-supported Sub-nanometer Pd 6 Clusters for Formic Acid Decomposition: A DFT Study

A periodic, self-consistent planewave DFT study was carried out to explore the potential use of Pd 6 clusters supported on a boron nitride sheet as a catalyst for the selective decomposition of formic acid (HCOOH) to CO 2 and H 2 . The competition between formate (HCOO) and carboxyl (COOH) paths on catalytic sites, with different proximities to the support, was studied. Based on energetics alone, the reaction may mainly follow the HCOO route. Slightly lower activation energies were found at the lateral sites of the cluster as compared to top face sites. This is particularly true for the bidentate to monodentate HCOO conversion. Through comparison of results with similar studies on HCOOH decomposition on extended Pd surfaces, it was demonstrated that the existence of undercoordinated sites in the sub-nanometer cluster could play a key role in preferentially stabilizing HCOO over COOH, which is a common CO precursor in this reaction. A hydrogen spillover mechanism was also investigated; migration toward the boron nitride support is not favorable, at least in the early stages of the reaction. However, hydrogen diffusion on the cluster has low barriers compared to those involved in formic acid decomposition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Photophysics of Intrinsic Single‐Photon Emitters in Silicon Nitride at Low Temperatures

A robust process for fabricating intrinsic single-photon emitters in silicon nitride is recently established. These emitters show promise for quantum applications due to room-temperature operation and monolithic integration with technologically mature silicon nitride photonics platforms. Here, the fundamental photophysical properties of these emitters are probed through measurements of optical transition wavelengths, linewidths, and photon antibunching as a function of temperature from 4.2 to 300 K. Important insight into the potential for lifetime-limited linewidths is provided through measurements of inhomogeneous and temperature-dependent broadening of the zero-phonon lines. At 4.2 K, spectral diffusion is found to be the main broadening mechanism, while spectroscopy time series reveal zero-phonon lines with instrument-limited linewidths.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Atomic Layer Deposition Niobium Nitride Films for High-Q Resonators

Niobium nitride (NbN) is a useful material for fabricating detectors because of its high critical temperature and relatively high kinetic inductance. In particular, NbN can be used to fabricate nanowire detectors and mm-wave transmission lines. When deposited, NbN is usually sputtered, leaving room for concern about uniformity at small thicknesses. In this work, we present atomic layer deposition niobium nitride (ALD NbN) as an alternative technique that allows for precision control of deposition parameters such as film thickness, stage temperature, and nitrogen composition. Atomic-scale control over film thickness admits a high degree of uniformity for films 4–30 nm thick; control over deposition temperature gives rise to growth rate changes, which can be used to optimize film thickness and critical temperature. In order to charac- terize ALD NbN in the radio-frequency regime, we construct single-layer micro- wave resonators and test their performance as a function of stage temperature and input power. ALD processes can admit high resonator quality factors, with ≥ 43% of resonators above Q i = 10 6 , which in turn increase detector multiplexing capabilities. i Furthermore, we find critical temperatures in the range of 7.5–10.9 K that vary as a function of cycle count and deposition temperature.

79 ASTRONOMY AND ASTROPHYSICS↗

Enhanced Tribological, Electrochemical, and Biocompatibility Properties of Ti6Al4V Alloy Through Gas Nitriding and CN Coating Deposition

The tribological properties, electrochemical corrosion resistance, and biocompatibility performance of Ti6Al4V alloy were improved through a duplex surface treatment process consisting of high-temperature gas nitriding followed by amorphous carbon nitride (CN) coating deposition. The tribological properties of the specimens were evaluated using a reciprocating sliding wear tester, while the electrochemical properties were examined by potentiodynamic polarization tests. Finally, the biocompatibility of the samples was investigated by means of cytotoxicity tests performed using mouse leukemic monocyte macrophage cells (Raw 264.7). The duplex treatment significantly improved the tribological performance of the Ti6Al4V sample. In particular, compared to an untreated Ti6Al4V sample, the duplex surface treatment (CN-NTs) reduced the wear depth by around 55 times when sliding against a 316L counterbody and 16 times when sliding against a Ti6Al4V counterbody. Of the various specimens, the CN-T sample showed the best corrosion resistance, while the CN-NT sample showed the best biocompatibility performance.

36 MATERIALS SCIENCE↗

Assessing cytotoxicity of boron nitride nanotubes: Interference with the MTT assay

Thanks to a non-covalent wrapping with glycol-chitosan, highly biocompatible and highly concentrated dispersions of boron nitride nanotubes were obtained and tested on human neuroblastoma cells. A systematic investigation of the cytotoxicity of these nanovectors with several complementary qualitative and quantitative assays allowed a strong interference with the MTT metabolic assay to be highlighted, similar to a phenomenon already observed for carbon nanotubes, that would wrongly suggest toxicity of boron nitride nanotubes. These results confirm the high complexity of these new nanomaterials, and the needing of extensive investigations on their exciting potential applications in the biomedical field.

60 APPLIED LIFE SCIENCES↗

CALPHAD modeling of uranium nitride (UN) fabrication routes enabled by first-principles calculations

The thermochemical details of fabricating uranium nitride (UN) by ammonolysis of uranium tetraflouride (UF 4 ) were determined using density functional theory (DFT) and CALculation of PHAse Diagrams (CALPHAD) computational methods. The thermochemical data of all binary, ternary, and quaternary U-H-N-F phases were computed using DFT, and the data for the phases that have not been measured experimentally, including UN 2 and NH 4 F(g), were combined with existing experimentally-determined data for CALPHAD modeling. The DFT data were benchmarked using experimental Gibbs energy of reaction and experimental thermochemical data for individual species. Phase diagrams relevant to the ammonolysis reaction are depicted, showing regions of stability for solid U-N, U-F and U-N-F phases. An unidentified phase produced in a previous experiment was identified as UN 0.95 F 1.2 (UNF) by comparing its X-ray diffraction spectrum to the experimental spectrum, and its formation during the fabrication of UN from UF 4 is supported by the simulated phase diagram. Here, it is calculated that UN 2 can be produced by the ammonolysis of UF 4 , but requires elevated temperatures, high NH 3 (g) partial pressure, and large amounts of flowing NH 3 (g) to avoid solid flu oride impurities in the uranium nitride. Likewise, U 2 N 3 can be produced instead at temperatures greater than 980 K. The use of silane (SiH 4 ) gas was investigated as a potential additive in the ammonolysis fabrication route to speed removal of fluorine. The addition of SiH 4 (g) offers little advantage to the removal of fluorine, and adds the complication of Si 3 N 4 formation. The use of DFT to fill in missing data to perform CALPHAD calculations demonstrated here allows for the determination of more comprehensive and trustworthy phase diagrams than the use of existing experimental data alone.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Consolidation of cubic and hexagonal boron nitride composites

When we Consolidate cubic boron nitride (cBN) it typically requires either a matrix of metal bearing materials that are undesirable for certain applications, or very high pressures within the cBN phase stability field that are prohibitive to manufacturing size and cost. We present new methodology for consolidating high stiffness cBN composites within a hexagonal boron nitride (hBN) matrix (15–25 vol%) with the aid of a binder phase (0–6 vol%) at moderate pressures (0.5–1.0 GPa) and temperatures (900–1300 °C). The composites are demonstrated to be highly tailorable with a range of compositions and resulting physical/mechanical properties. Ultrasonic measurements indicate that in some cases these composites have elastic mechanical properties that exceed those of the highest strength steel alloys. Moreover, two methods were identified to prevent phase transformation of the metastable cBN phase into hBN during consolidation: 1. removal of hydrocarbons, and 2. increased cBN particle size. Lithium tetraborate worked better as a binder than boron oxide, aiding consolidation without enhancing cBN to hBN phase transformation kinetics. These powder mixtures consolidated within error of their full theoretical mass densities at 1 GPa, and had only slightly lower densities at 0.5 GPa. This shows potential for consolidation of these composites into larger parts, in a variety of shapes, at even lower pressures using more conventional manufacturing methods, such as hot-pressing.

36 MATERIALS SCIENCE↗

Evaluation of hydrogen evolution reaction activity of molybdenum nitride thin films on their nitrogen content

We report preparation and electrochemical properties of molybdenum nitride Mo x N (x from 1 to 2) and Mo thin films prepared by the magnetron sputtering. We adjusted amount of nitrogen during reactive sputtering, to achieve different ratios of Mo:N in the films.We could prepare well-defined and extremely smooth films. We determined hydrogen evolution reaction (HER) activity and other kinetics parameters such as Tafel slopes and exchange current densities. Corrosion stability at anodic potentials was also evaluated from onset potentials of dissolution of prepared films. We found that Mo x N thin film HER activity dependence on nitrogen content in the film exhibits volcano-like diagram. From XRD measurements we identified several phases present in the films from pure Mo to β-Mo 2 N and δ-MoN. We find that β-Mo 2 N phase has the highest HER activity. Stability of studied nitrides at anodic potentials increases with increasing content of nitrogen. Mo films sputtered at high substrate temperatures exhibit higher HER activity than Mo x N systems. Furthermore, with increasing substrate temperature during sputtering, HER activity of pure Mo thin films increases.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ductility evaluation of nitrided Zircaloy-4 cladding by ring compression testing

Here, this study evaluated the embrittlement of Zircaloy-4 cladding by dry air and dry nitrogen environments as a function of process temperature and duration of exposure. A Netzsch thermogravimetric analyzer was used to measure the mass gain of cladding sections over time with specified temperature and gas flow programs. Oxidation of Zircaloy in dry air produced a brittle ZrO 2 layer with ductile unreacted metal. In contrast, nitridation of Zircaloy had a slower reaction rate but produced a brittle cladding that was more easily breached during ring compression tests. The ring compression tests demonstrated that ductility of Zircaloy cladding decreases as nitrogen pickup increases; a ductile-to-brittle transition occurs near a mass gain of 2.1 wt %. Nitridation showed minimal temperature dependency in ductility degradation, whereas oxidation showed significant temperature dependency in ductility degradation, with severe embrittlement occurring at 1200 °C. Optical micrographs confirmed the formation of uniform ZrN layers (approximately 12 µm thick) on the cladding surface, indicating that cladding embrittlement is primarily the result of nitrogen diffusion rather than metal layer thinning.

36 MATERIALS SCIENCE↗

Modulation of the crystallinity of hydrogenated nitrogen-rich graphitic carbon nitrides

An hydrogenated nitrogen-rich graphitic carbon nitride, structurally related to the theoretical graphitic phase of C{sub 3}N{sub 4}, has been synthesized in a bulk well-crystallized form. This new material was prepared by thermal decomposition of thiosemicarbazide up to 600 deg. C at ambient pressure under nitrogen flow. Its composition was determined by elemental combustion analysis. Powder X-ray diffraction, infrared spectroscopy, thermogravimetric analysis, X-ray photoelectron spectroscopy and C{sup 13} MAS NMR characterizations were performed. This material can be schematically described with a two-dimensional framework and a composition close to C{sub 3}N{sub 4.17}H{sub 1.12}. In this nitrogen-rich material, C{sub 3}N{sub 3} voids are fully occupied by water molecules which are strongly trapped into the material. A loss of crystallinity associated with a modification of the thermal behavior is observed when the amount of trapped molecules decreases in the graphitic material, order being damaged both between and in the graphitic planes. - Graphical abstract: Graphitic hydrogenated nitrogen-rich carbon nitride was synthesized at ambient pressure and mild temperature. The nitrogen overstoichiometry is explained by the presence of triazine voids in the graphene planes. The presence of trapped water molecules into these voids tends to influence the crystallinity and the thermal behavior of the materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗