Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “neon”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

3D radiated power analysis of JET SPI discharges using the Emis3D forward modeling tool

Abstract Precise values for radiated energy in tokamak disruption experiments are needed to validate disruption mitigation techniques for burning plasma tokamaks like ITER and SPARC. Control room analysis of radiated power ( P rad ) on JET assumes axisymmetry, since fitting 3D radiation structures with limited bolometry coverage is an under-determined problem. In mitigated disruptions, radiation is toroidally asymmetric and 3D, due to fast-growing 3D MHD modes and localized impurity sources. To address this problem, Emis3D adopts a physics motivated forward modeling (‘guess and check’) approach, comparing experimental bolometry data to synthetic data from user-defined radiation structures. Synthetic structures are observed with the Cherab modeling framework and a best fit chosen using a reduced χ 2 statistic. 2D tomographic inversion models are tested, as well as helical flux tubes and 3D MHD simulated structures from JOREK. Two nominally identical pure neon shattered pellet injection (SPI) mitigated discharges in JET are analyzed. 2D tomographic inversions with added toroidal freedom are the best fits in the thermal quench (TQ) and current quench (CQ). In the pre-TQ, 2D reconstructions are statistically the best fits, but are likely over-optimized and do not capture the 3D radiation structure seen in fast camera images. The next-best pre-TQ fits are helical structures that extend towards the high-field side, consistent with an impurity flow under the magnetic nozzle effect also observed in JOREK simulations. Whole-disruption radiated fractions of 0.98 + 0.03 / − 0.29 and 1.01 + 0.02 / − 0.17 are found, suggesting that the stored energy may have been fully mitigated by each SPI, although mitigation efficiencies well below ITER and SPARC requirements for high energy pulses are still within the large uncertainties. Emis3D is also used to validate JOREK SPI simulations, and confirms improvements in matching experiment from changes to impurity modeling. Time-dependent toroidal peaking factors are calculated and discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Analysis and design of fast flow liquid Li divertor for fusion nuclear science facility (FNSF) using coupled plasma boundary and LM MHD/heat transfer codes *

The SOLPS-ITER code is utilized to analyze the boundary plasma associated with a fast-flow lithium (Li) divertor configuration in the fusion nuclear science facility (FNSF) tokamak and identify operational regimes with acceptable divertor and core conditions. Plasma transport from the SOLPS-ITER code has been coupled with a liquid metal (LM) MHD/heat transfer code to model a Li open-surface divertor design and assess its impact on the scrape-off-layer (SOL) and core plasma performance. Simulations with only Neon (Ne) impurity seeding have been conducted to evaluate its impact on meeting FNSF design demands for the divertor and upstream plasma parameters. Simulation results indicate that Ne seeding significantly mitigates divertor heat flux but potentially reduces both upstream electron and main ion density due to fuel dilution. The combined application of Ne seeding and deuterium (D 2 ) puffing is required to satisfy the FNSF design requirements on upstream density ($n^{OMP}_{e,sep}$~1× 10 20 m -3 ) and divertor energy flux ($q^{Odiv}_{\bot,max}$<10 MW m -2 ). D 2 puffing plays a role in counteracting upstream density drops and augmenting energy and momentum losses through atomic and molecular processes. The inlet Li flow velocity is systematically varied across a wide range to identify acceptable flows and corresponding LM surface temperatures. This comprehensive analysis identifies the acceptable Li flow parameters, LM surface temperature, and emitted Li fluxes necessary to meet the major design constraints. The emitted Li fluxes exhibit minimal impact on the main plasma at surface temperatures up to approximately ~525 °C, corresponding emitted Li fluxes of up to φ Li ~2X10 23 atoms s -1 . Uncertainties in the Li emission processes from the surface are also investigated, primarily influencing Li loss in the lower surface temperature range (<525 °C), with simulation results indicating a minor impact on the divertor and upstream plasma. Conversely, evaporation predominantly drives the Li loss processes at higher surface temperature ranges (>525 °C), contaminating both the divertor and upstream plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Extended-MHD simulations of disruption mitigation via massive gas injection in SPARC

Recent developments to the M3D-C1 code enable higher fidelity modeling of disruptions, and can be applied in the design verification of reactor-scale tokamaks. Among these new capabilities is a method to mesh conducting vessel structures such as coils and passive plates, packing of the toroidal mesh around gas injectors, as well as anisotropic resistivity inside the vessel structures. We present extended-magnetohydrodynamic (MHD) simulations of disruption mitigation via massive gas injection (MGI) in SPARC. The goal of this study is to inform the disruption mitigation layout of SPARC and aid in the design of an effective gas injector configuration. Fully three-dimensional simulations with M3D-C1 are carried out for various injector configurations with the primary goal of determining the effect of different MGI parameters on heat loads and vessel forces. The simulations include a model for impurity ionization, recombination, advection and radiation, as well as spatially resolved conducting structures around the plasma. A localized mixture of deuterium and neon with a small toroidal and poloidal width is injected in up to six locations. We demonstrate that M3D-C1 can model a rapid shutdown via MGI using narrow and more realistic gas plumes than in previous simulations. As a result of the q = 1 surface in the SPARC baseline case a sawtooth is observed early in the simulations. Despite the sawtooth and the onset of edge MHD instabilities, the impurity distribution remains localized around the injector locations, but enables a radiative shutdown of the plasma. We find that using the maximum of six gas injectors results in a lower peaking factor and leads to a more even distribution of radiation toroidally than using two injectors.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Multi-device analysis of energy loss duration and pellet penetration with implications for shattered pellet injection in ITER

A robust disruption mitigation system (DMS) requires accurate characterization of key disruption timescales, one of the most notable being the thermal quench (TQ). Recent modeling of shattered pellet injection (SPI) into ITER plasmas, using JOREK and INDEX, suggests long TQ durations (6–10 ms) and slow cold front propagation due to the large plasma size. If validated, these predictions would have an impact on the desired pellet parameters and mitigation strategies for the ITER DMS. To resolve these questions, a database of SPI experiments from several small-to-large sized devices (J-TEXT, KSTAR, AUG, DIII-D, and JET) has been compiled under the auspices of the International Tokamak Physics Activity MHD, disruptions, and control topical group. Analysis of the energy loss duration (proxy for the TQ duration) with machine size is presented for both mixed neon/deuterium (Ne/D) SPI and pure deuterium (D) SPI. Several metrics for the energy loss onset (e.g. soft x-ray signal drop, I p dip, and radiation flash) were considered as the conventional metric, electron cyclotron emission, is often cut-off during SPI. Several scalings with different onset metrics showed an increase in energy loss duration with machine size. The energy loss duration was additionally shown to be a function of the ratio between the number of SPI neon atoms injected and the stored energy. Analysis of the pellet shard position relative to the cold front found that in larger devices, pellets are typically found inboard of the q = 2 surface at the energy loss onset. Lastly, the delay between the pellet shards hitting the q = 2 surface and the energy loss onset was additionally found to increase with machine size. This suggests that the pellet shards in large devices will penetrate faster and further than the cooling front.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Modeling the effect of MHD activity on runaway electron generation during SPARC disruptions

Magnetohydrodynamic (MHD) instabilities and runaway electrons (REs) interact in several ways, making it important to self-consistently model these interactions for accurate predictions of RE generation and the design of mitigation strategies, such as massive gas injection (MGI). Using M3D-C1 – an extended MHD code with a RE fluid model – we investigate the effects of 3-D nonlinear MHD activity, material injection, and 2-D axisymmetric vertical displacement events (VDEs) on RE evolution during disruptions on SPARC – a high-field, high-current tokamak designed to achieve a fusion gain Q > 1. Several cases, comprising different combinations of neon (Ne) and deuterium (D 2 ) injection, are considered. Here, our results demonstrate key effects that arise from the self-consistent RE + MHD coupling, such as an initial increase in RE generation due to MHD instability growth, decreased saturation energies of the m/n = 1/1 mode driving sawteeth-like activity, RE losses in stochastic magnetic fields, and subsequent RE confinement and plateau formation due to re-healing of flux surfaces. Large RE plateaus (>5 MA) are obtained with Ne-only injection (2-5 × 10 21 atoms), while combined D 2 + Ne injection (2 × 10 21 Ne atoms; 1.8 × 10 22 D 2 molecules) produces a lower RE current (<2 MA). With D 2 + Ne injection, a post thermal quench "cold" VDE terminates the RE beam, preventing a steady plateau. These simulations couple REs, 3-D MHD instabilities, MGI, and axisymmetric VDEs for the first time in SPARC disruption simulations and represent a crucial step in understanding RE generation and mitigation in high-current devices like SPARC.

Datta, Rishabh [Massachusetts Inst. of Technology ↗
DOE OSTI2023

TriWaSp: a multi-faceted visible spectroscopy diagnostic on the ST40 tokamak

Here, we present a new state-of-the-art Triple Wavelength Spectrometer (TriWaSp), recently deployed on ST40, a high field low aspect ratio spherical tokamak. The TriWaSp has a range of possible applications due to its flexible design; the current configuration focuses on charge exchange recombination spectroscopy from carbon and neon impurities in the ST40 plasma. This paper discusses the detailed setup of the system and presents initial charge exchange ion temperature measurements using a single line of sight, which show good agreement with other ion temperature diagnostics. Building on these commissioning results and forward modelling of the system, a new observation geometry has been implemented for the next experimental campaign which will considerably improve the localisation of ion temperature and velocity profile measurements.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Hydrodynamic simulations of electron-capture supernovae: progenitor and dimension dependence

ABSTRACT We present neutrino-transport hydrodynamic simulations of electron-capture supernovae (ECSNe) in flash with new two-dimensional (2D) collapsing progenitor models. These progenitor models feature the 2D modelling of oxygen-flame propagation until the onset of core collapse. We perform axisymmetric simulations with six progenitor models that, at the time of collapse, span a range of propagating flame front radii. For comparison, we also perform a simulation with the same set-up using the canonical, spherically symmetrical progenitor model n8.8. We found that the variations in the progenitor models inherited from simulations of stellar evolution and flame propagation do not significantly alter the global properties of the neutrino-driven ECSN explosion, such as the explosion energy (∼1.36–1.48 × 1050 erg) and the mass (∼0.017–0.018 M⊙) and composition of the ejecta. Due to aspherical perturbations induced by the 2D flame, the ejecta contains a small amount (≲1.8 × 10−3 M⊙) of low-Ye (0.35 < Ye < 0.4) component. The baryonic mass of the protoneutron star is ∼1.34 M⊙ (∼1.357 M⊙) with the new (n8.8) progenitor models when simulations end at ∼400 ms and the discrepancy is due to updated weak-interaction rates in the progenitor evolutionary simulations. Our results reflect the nature of ECSN progenitors containing a strongly degenerate oxygen–neon–magnesium (ONeMg) core and suggest a standardized ECSN explosion initialized by ONeMg core collapse. Moreover, we carry out a rudimentary three-dimensional simulation and find that the explosion properties are fairly compatible with the 2D counterpart. Our paper facilitates a more thorough understanding of ECSN explosions following the ONeMg core collapse, though more three-dimensional simulations are still needed.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Time-dependent density-functional theory of high-order harmonic generation from noble-gas atoms driven by orthogonally polarized two-color laser fields

An orthogonally polarized two-color (OTC) field of frequency ratio 1 : 2 is known to generate both odd and even harmonic spectra in the mutually orthogonal directions of the fundamental and the second-harmonic fields, respectively. Recollision angles of an ionized electron driven back to its parent ion by an OTC field are inferred from the intensity ratio of odd and even harmonics, where the relative phase delays between the two-color fields can be used in time-resolved measurements on a subcycle time scale. Here, we present the ab initio, many-electron calculation of time-resolved recollision angles of noble-gas atoms driven by an OTC field, based on the time-dependent density-functional theory. Our results agree well with experimental data by Shafir et al. in Nat. Phys. 5, 412 (2009) of helium atom and New J. Phys. 12, 073032 (2010) of neon atom.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2020

Resonant propagation of x rays from the linear to the nonlinear regime

We present a theoretical study of temporal, spectral, and spatial reshaping of intense, ultrafast x-ray pulses propagating through a resonant medium. Our calculations are based on the solution of a three-dimensional time-dependent Schrodinger-Maxwell equation, with the incident x-ray photon energy on resonance with the core-level is-3p transition in neon. We study the evolution of the combined incident and medium-generated field, including the effects of stimulated emission, absorption, ionization, and Auger decay, as a function of the input pulse energy and duration. We find that stimulated Raman scattering between core-excited states 1s -1 3p and 2p -1 3p occurs at high x-ray intensity, and that the emission around this frequency is strongly enhanced when also including the similar 1s -1 -2p -1 response of the ion. We also explore the dependence of x-ray self-induced transparency (SIT) and self-focusing on the pulse intensity and duration, and we find that the stimulated Raman scattering plays an important role in both effects. Finally, we discuss how these nonlinear effects may potentially be exploited as control parameters for pulse properties of x-ray free-electron laser sources.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2021

Enhanced ionization of counter-rotating electrons via doorway states in ultrashort circularly polarized laser pulses

We have performed single-active-electron numerical calculations of neon- and argonlike atoms interacting with short, intense, circularly polarized laser pulses at wavelengths between 10 nm and 1000 nm. Our results reveal a surprisingly large change by a factor of about 100 in the ionization ratio of electrons in initial states counter-rotating with respect to the field over corotating electrons in the previously unexplored intermediate few-photon ionization regime. The physical mechanism behind this observation is related to resonant enhanced ionization via states close in energy to the initial states. These doorway states are accessible exclusively from the initial state for counter-rotating electrons within the respective wavelength regime. Furthermore, the results may open a new route for controlling the generation of spin-polarized electrons by ultrashort laser pulses.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2024

Above-threshold ionization at laser intensity greater than 10 20 W / cm 2

Here we present experimental observation of above-threshold ionization (ATI) electrons produced by ionization of the neon K shell in a laser field where intensity exceeds 10 20 W/cm 2 . An array of plastic scintillating calorimeter detectors was used to measure the high-energy electrons at four angles in the laser forward direction. Coarse energy resolution was obtained using aluminum filters of several thicknesses to block lower-energy electrons. A threshold intensity around 2×10 20 W/cm 2 is observed for production of energetic ATI electrons in the laser forward direction, with maximum electron energy exceeding 10 MeV. L-shell electrons with energies <1.4 MeV are scattered farther forward along the laser direction than expected. We present comparisons of the measured total electron energies to the predictions of Monte Carlo models employing the ADK-PPT ionization model and the Augst barrier suppression ionization model.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2023

Refined room-temperature equation of state of Bi up to 260 GPa

At room temperature, bismuth undergoes several structural transitions with increasing pressure before taking on a body-centered cubic (bcc) phase at approximately 8 GPa. The bcc structure is stable to the highest measured pressure and its simplicity, along with its high compressibility and atomic number, makes it an enticing choice as a pressure calibrant. Here, we present three data sets on the compression of bismuth in a diamond anvil cell in a neon pressure medium, up to a maximum pressure of about 260 GPa. The use of a soft pressure medium reduces deviatoric stress when compared to previous work. With an expanded pressure range, a higher point density, and a decreased uniaxial stress component, we are able to provide more reliable equation of state parameters. We also conduct density functional theory electronic-structure calculations that confirm that the bcc phase is energetically favored at high pressure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Ab initio multishell valence-space Hamiltonians and the island of inversion

In the shell-model framework, valence-space Hamiltonians connecting multiple major-oscillator shells are of key interest for investigating the physics of neutron-rich nuclei, which have been the subject of intense experimental activity for decades. Here we present an extension of the ab initio valence-space in-medium similarity renormalization group, which allows the derivation of such Hamiltonians nonperturbatively. Starting from initial two- and three-nucleon forces from chiral effective field theory, we then calculate properties of nuclei in the important island-of-inversion region above oxygen, so far unexplored with ab initio methods. In this work, our results in the neon and magnesium isotopes indicate the importance of neutron excitation from the $\textit{sd}$ to $\textit{pf}$ shells and ground states dominated by intruder configurations around $\textit{N}$ = 20, consistent with the conclusions from phenomenological studies. We also benchmark the excitation spectrum of 16 O with coupled-cluster theory, finding generally good agreement, and discuss implications for ground-state energies and charge radii in oxygen and calcium isotopes. Finally we outline the proper procedure for treating the longstanding issue of center-of-mass contamination, and show that with a particular choice of valence space, these spurious states can be removed successfully.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Spectroscopy of 30 P and the abundance of 29 Si in presolar grains

The astrophysical 29 Si(p,γ) reaction is expected to play a key role in determining the final 29 Si yields ejected in nova explosions. Such yields are used to accurately identify the stellar origins of meteoritic stardust and recently, distinctive silicon isotopic ratios have been extracted from a number of presolar grains. Here, the light-ion 28 Si( 3 He,p) fusion-evaporation reaction was used to populate low-spin proton-unbound excited states in the nucleus 30 P that govern the rate of the astrophysical 29 Si(p,γ) reaction. In particular, γ decays were observed from resonances up to E r = 500keV, and key resonances at 217 and 315 keV have now been identified as 2 + and 2¯ levels, respectively. Here, the present paper provides the first estimate of the 217-keV resonance strength and indicates that the strength of the 315-keV resonance, which dominates the rate of the 29 Si(p,γ) reaction over the entire peak temperature range of oxygen-neon novae, is higher than previously expected. As such, the abundance of 29 Si ejected during nova explosions is likely to be less than that predicted by the most recent theoretical models.

20 ≤ A ≤ 38↗
DOE OSTI2021

First-principles equation of state database for warm dense matter computation

We put together a first-principles equation of state (FPEOS) database for matter at extreme conditions by combining results from path integral Monte Carlo and density functional molecular dynamics simulations of the elements H, He, B, C, N, O, Ne, Na, Mg, Al, and Si as well as the compounds LiF , B 4 C , BN , CH 4 , CH 2 , C 2 H 3 , CH , C 2 H , MgO , and MgSiO 3 . For all these materials, we provide the pressure and internal energy over a density-temperature range from ~ 0.5 to 50 g cm - 3 and from ~ 10 4 to 10 9 K, which are based on ~ 5000 different first-principles simulations. We compute isobars, adiabats, and shock Hugoniot curves in the regime of L - and K -shell ionization. Invoking the linear mixing approximation, we study the properties of mixtures at high density and temperature. Furthermore, we derive the Hugoniot curves for water and alumina as well as for carbon-oxygen, helium-neon, and CH-silicon mixtures. We predict the maximal shock compression ratios of H 2 O , H 2 O 2 , Al 2 O 3 , CO , and CO 2 to be 4.61, 4.64, 4.64, 4.89, and 4.83, respectively. Finally we use the FPEOS database to determine the points of maximum shock compression for all available binary mixtures. We identify mixtures that reach higher shock compression ratios than their end members. We discuss trends common to all mixtures in pressure-temperature and particle-shock velocity spaces. In the Supplemental Material, we provide all FPEOS tables as well as computer codes for interpolation, Hugoniot calculations, and plots of various thermodynamic functions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Observation of ionization trends in a laboratory photoionized plasma experiment at Z

We report experimental and modeling results for the charge state distribution of laboratory photoionized neon plasmas in the first systematic study over nearly an order of magnitude range of ionization parameter ξ ∝ F/N e . The range of ξ is achieved by flexibility in the experimental platform to adjust either the x-ray drive flux F at the sample or the electron number density N e or both. Experimental measurements of photoionized plasma conditions over such a range of parameters enable a stringent test of atomic kinetics models used within codes that are applied to photoionized plasmas in the laboratory and astrophysics. From experimental transmission data, ion areal densities are extracted by spectroscopic analysis that is independent of atomic kinetics modeling. The measurements reveal the net result of the competition between photon-driven ionization and electron-driven recombination atomic processes as a function of ξ as it affects the charge state distribution. Results from radiation-hydrodynamics modeling calculations with detailed inline atomic kinetics modeling are compared with the experimental results. There is good agreement in the mean charge and overall qualitative similarities in the trends observed with ξ but significant quantitative differences in the fractional populations of individual ions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Constraining the P 30 ( p , γ ) S 31 Reaction Rate in ONe Novae via the Weak, Low-Energy, β -Delayed Proton Decay of Cl 31

The 30 P(p,γ) 31 S reaction plays an important role in understanding the nucleosynthesis of A ≥ 30 nuclides in oxygen-neon novae. The Gaseous Detector with Germanium Tagging was used to measure 31 Cl β-delayed proton decay through the key J π = 3/2 + , 260-keV resonance. The intensity $I$$^{260}_{βp}$ = $8.3$$^{+1.2}_{–0.9}$ × 10 –6 represents the weakest β-delayed, charged-particle emission ever measured below 400 keV, resulting in a proton branching ratio of Γ p /Γ = $2.5$$^{+0.4}_{–0.3}$ × 10 –4 . Here, by combining this measurement with shell-model calculations for Γγ and past work on other resonances, the total 30 P(p,γ) 31 S rate has been determined with reduced uncertainty. The new rate has been used in hydrodynamic simulations to model the composition of nova ejecta, leading to a concrete prediction of 30 Si: 28 Si excesses in presolar nova grains and the calibration of nuclear thermometers.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Coherent High-Frequency Axial Oscillations in a Partially Magnetized Direct Current Magnetron Discharge

High-frequency oscillations are observed in a neon plasma of a direct current magnetron discharge. At low discharge currents, we see highly coherent 60 MHz fluctuations. Above a distinct current threshold, secondary 5–10 MHz fluctuations emerge in addition to turbulent fluctuations in the 60–100 MHz range. The oscillations in the total discharge current suggest axial wave propagation. A lower-hybrid wave theory is invoked to model the high-frequency oscillations. Here, we attribute the low-frequency modes to a turbulence-driven inverse cascade process, as suggested by recent simulations.

33 ADVANCED PROPULSION SYSTEMS↗