SEARCH · Engineering Papers

Results for “model compounds”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

All sources NASA NTRS DOE OSTI

NASA NTRS1994

Increase of carbonyl fluoride (COF2) in the stratosphere and its contribution to the 1992 budget of inorganic fluorine in the upper stratosphere

Volume mixing ratio profiles of COF2 have been derived through most of the stratosphere between 30 deg N and 54 deg S from series of 0.01-/cm resolution infrared solar spectra recorded in the occultation mode by the atmospheric trace molecule spectroscopy (ATMOS) instrument during the ATLAS 1 space shuttle mission of March-April 1992. When compared with similar results obtained from the ATMOS/Spacelab 3 mission of April-May 1985, the cumulative increase in the burden of COF2 in the middle and upper stratosphere was found to be 67% for that 7-year time interval. By combining a subset of these COF2 results with upper stratospheric concentrations of HF also derived from the ATMOS observations, it was further found that the budget of inorganic fluorine above 35 km altitude increased by (60 +/- 10)% over the 1985-1992 time interval, which corresponds to an average exponential rate of increase of (6.7 +/- 1/1)%/yr, or a linear rate of increase reference to 1985 of (8.5 +/- 1.3)%/yr at the 1 sigma confidence level. The total inorganic F atom volume mixing ratio found in the upper stratosphere for 1985 and 1992 and the increase during this perid mirror the rise in man-made fluorine-bearing compounds at the ground during the early to mid 1980s. This demonstrates the negligible impact of natural sources of fluorine, in particular volcanic activity, on the observed change in F in the upper stratosphere. Implications of the present findings and comparison with model results are discussed.

Zander, R.↗

NASA NTRS1994

Increase of carbonyl fluoride (COF2) in the stratosphere and its contribution to the 1992 budget of inorganic fluorine in the upper stratosphere

Volume mixing ratio profiles of COF2 have been derived through most of the stratosphere between 30 deg N and 54 deg S from series of 0.01-cm(exp -1) resolution infrared solar spectra recorded in the occultation mode by the atmospheric trace molecule spectroscopy (ATMOS) instrument during the ATLAS 1 space shuttle mission of March-April 1992. When compared with similar results obtained from the ATMOS/Spacelab 3 mission of April-May 1985, the cumulative increase in the burden of COF2 in the middle and upper stratosphere was found to be 67% for that 7-year time interval. By combining a subset of these COF2 results with upper stratospheric concentrations of HF also derived from the ATMOS observations, it was further found that the budget of inorganic fluorine above 35 km altitude increased by (60 +/- 10) % over the 1985-1992 time interval, which corresponds to an average exponential rate of increase of(6.7 +/- 1.1) % /yr , or a linear rate of increase referenced to 1985 of (8.5 +/- 1.3) % /yr at the 1(sigma) confidence level. The total inorganic F atom volume mixing ratio found in the upper stratosphere for 1985 and 1992 and the increase during this period mirror the rise in man-made fluorine-bearing compounds at the ground during the early to mid 1980s. This demonstrates the negligible impact of natural sources of fluorine, in particular volcanic activity, on the observed change of F in the upper stratosphere. Implications of the present findings and comparison with model results are discussed.

Zander, R.↗

NASA NTRS1998

Profile Evolution Simulation in Etching Systems Using Level Set Methods

Semiconductor device profiles are determined by the characteristics of both etching and deposition processes. In particular, a highly anisotropic etch is required to achieve vertical sidewalls. However, etching is comprised of both anisotropic and isotropic components, due to ion and neutral fluxes, respectively. In Ar/Cl2 plasmas, for example, neutral chlorine reacts with the Si surfaces to form silicon chlorides. These compounds are then removed by the impinging ion fluxes. Hence the directionality of the ions (and thus the ion angular distribution function, or IAD), as well as the relative fluxes of neutrals and ions determines the amount of undercutting. One method of modeling device profile evolution is to simulate the moving solid-gas interface between the semiconductor and the plasma as a string of nodes. The velocity of each node is calculated and then the nodes are advanced accordingly. Although this technique appears to be relatively straightforward, extensive looping schemes are required at the profile corners. An alternate method is to use level set theory, which involves embedding the location of the interface in a field variable. The normal speed is calculated at each mesh point, and the field variable is updated. The profile comers are more accurately modeled as the need for looping algorithms is eliminated. The model we have developed is a 2-D Level Set Profile Evolution Simulation (LSPES). The LSPES calculates etch rates of a substrate in low pressure plasmas due to the incident ion and neutral fluxes. For a Si substrate in an Ar/C12 gas mixture, for example, the predictions of the LSPES are identical to those from a string evolution model for high neutral fluxes and two different ion angular distributions.(2) In the figure shown, the relative neutral to ion flux in the bulk plasma is 100 to 1. For a moderately isotropic ion angular distribution function as shown in the cases in the left hand column, both the LSPES (top row) and rude's string method (bottom row) predict tapered profiles. The LSPES uses an AD with a FWHM = 13.5 degrees, and rude's model uses a ratio of sheath voltage to ion temperature of 50. The more anisotropic IADs produce profiles with more vertical sidewalls and a wider bottom surface, as shown in the right hand column. Here, the LSPES has an AD with a FWHM = 2 degrees, and rude's model uses a ratio of 500 of sheath voltage to ion temperature. The agreement between the LSPES and rude's model is excellent in both cases. We will present etching profiles generated by the LSPES, including calculations of the re-emitted fluxes of both neutrals and ions off of the profile walls. In addition, we will show the effect of geometric structures (overhangs, etc.) on the etching profiles. Other physical aspects, such as surface diffusion, will also be included in the model.

Hwang, Helen H.↗

NASA NTRS2004

Did the Pre-RNA World Rest Upon DNA Molecules?

The isolation of a DNA sequence that catalyzes the ligation of oligodeoxynucleotides via the formation of 3' - 5' phosphodiester linkage significance in selection experiments has been reported. Ball recently used this to discuss the possibility that natural DNA molecules may have formed in the primitive Earth leading to the origin of life. As noted by Ferris and Usher, if metabolic pathways evolved backwards, it could be argued that the biosynthesis of 2-deoxyribose from ribose suggests that RNA came from DNA. As summarized elsewhere, there are several properties of deoxyribose which could be interpreted to support the possibility that DNA-like molecules arose prior to the RNA world. For example, 2-deoxyribose is slightly more soluble than ribose (which may have been an advantage in a drying pool scenario), may have been more reactive under possible prebiotic conditions (it forms a nucleoside approx. 150 times faster than ribose with the alternative base urazole at 25 C), while it decomposes in solution (approximately 2.6 times more slowly than ribose at 100 C). Other advantages of DNA over RNA are that it has one fewer chiral center, has a greater stability at the 8.2 pH value of the current oceans, and does not has the 2'5' and 3'5' ambiguity in polymerizations. Yet, there is strong molecular biological and biochemical evidence that RNA was featured in the biology well before the last common ancestor. The presence of sugar acids, including both ribo- and deoxysugar acids, in the 4.6 Ga old Murchison meteorite suggest that both may have been available in the primitive Earth, derived from the accretion of extraterrestrial sources and/or from endogenous processes involving formaldehyde and its derivatives. However, the abiotic synthesis of deoxyribose, ribose, and other sugars from glyceraldehyde and acetaldehyde under alkaline conditions is inefficient and unespecific. Although sugars are labile compounds, the role of cyanamide or borate minerals in the stabilization of the cyclic forms of ribose and other pentoses has recently been demonstrated. Nonetheless, the assumption either RNA or DNA was the first genetic material needs to be supplemented by laboratory models demonstrating that the prebiotic synthesis of activated beta-D-(deoxy)ribonucleotides and their polymers was feasible. As of today such evidence is lacking, and there is no convincing synthesis of any nucleotide, since all model experiments produce complex mixtures of products in which there is no preferential synthesis of chiral D-nucleotides. This strongly suggests that both DNA and RNA may have been preceded by pairing structures much simpler than extant nucleic acids. It is doubtful that DNA molecules, or indeed other (de0xy)ribofuranoid oligonucleotides formed the basis of these as yet undescribed pre-RNA worlds.

Lazcano, Antonio↗

NASA NTRS2004

Evaluation of GOME Satellite Measurements of Tropospheric NO2 and HCHO using Regional Data from Aircraft Campaigns in the Southeastern United States

We compare tropospheric measurements of nitrogen dioxide (NO2) and formaldehyde (HCHO) from the Global Ozone Monitoring Experiment (GOME) satellite instrument with in situ measurements over eastern Texas and the southeast United States. On aveiage, the GOME and in situ measurements of tropospheric NO2 and HCHO columns are consistent despite pronounced sampling differences. The geometric mean in situ to GOME ratios over the campaign are 1.08 for NO2 and 0.84 for HCHO, with corresponding geometric standard deviations of 1.27 and 1.38. The correlation of the observed column spatial variability between the two NO2 measurement sets is encouraging before (r2 = 0.54, n = 18) and after (r2 = 0.67, n = 18) correcting for a sampling bias. Mean relative vertical profiles of HCHO and NO2 calculated with a global three-dimensional model (GEOS-CHEM) and used in the GOME retrieval are highly consistent with in situ measurements; differences would affect the retrieved NO2 and HCHO columns by a few percent. GOME HCHO columns over eastern Texas include contributions from anthropogenic volatile organic compound (VOC) emissions but are dominated by biogenic VOC emissions at the regional scale in August-September when HCHO columns are within 20% of those over the southeastern United States. In situ measurements show that during summer the lowest 1500 m (the lower mixed layer) contains 75% of the tropospheric NO2 column over Houston and Nashville, and 60% of the HCHO column over Houston. Future validation of space-based measurements of tropospheric NO2 and HCHO columns over polluted regions should include coincident in situ measurements that span the entire satellite footprint, especially in the heterogeneous mixed layer.

Martin, R. V.↗

NASA NTRSDate not supplied

UAS Payload Design for In-Situ Smoke Plume Sensing

To aid in the detection of harmful aerosols and trace gases emitted in wildfires and prescribed burns, we are designing a smoke-specific payload which can be flown on the Black Swift S2™ Uncrewed Aerial System (UAS) platform. The payload will be custom and mounted within the nosecone, equipped with a trace gas sensor suite and particle spectrometer for characterization of wildfire and prescribed burn emissions. This data will aid in the improvement of HYSPLIT3 modeling to make more informed decisions regarding prescribed burns, particularly for mountain valleys in the Pacific Northwest. The trace gas suite will be composed of 8 low-cost trace gas sensors (CH4, CO2, CO, HCN, NO2, NO, O3, and Volatile Organic Compounds (VOCs)). Portable Optical Particle Spectrometer (POPS) measures particle size range between 0.14 to 3 µm, which is crucial for assessing public health impact, air quality, and visibility.

Henry Miller↗

NASA NTRS1981

The growth of metastable peritectic compounds

The influence of gravitationally driven thermosolutal convection on the directional solidification of peritectic alloys is considered as well as the relationships between the solidification processing conditions, and the microstructure, chemistry, and magnetic properties of such alloys. Analysis of directionally solidified Pb-Bi peritectic samples indicates that appreciable macrosegregation occurs due to thermosolutal convection and/or Soret diffusion. A peritectic solidification model which accounts for partial mixing in the liquid ahead of the planar solidification interface and describes macrosegregation has been developed. Two-phase dendritic and banded microstructures were grown in the Pb-Bi peritectic system, refined two-phase microstructures have were observed, and candidate formation mechanisms proposed. Material handling, containment, casting, microstructural and magnetic characterization techniques were developed for the Sm-Co system. Alloys produced with these procedures are homogeneous.

Larson, D. J., Jr.↗

NASA NTRS1988

Carbon recycling in materially closed ecological life support systems

Results of studies are presented of materially closed energetically open microbial ecosystems or 'closed ecosystems'. These are natural marine ecosystems that have been sealed in glass containers to prevent material exchange with the environment but allow energy to pass freely through them. They represent model life support systems for the future human habitation of space. The results are discussed analytically and indicate that these ecosystems, when subjected to a constant energy flux, seem to be reliable and self-sufficient systems for recycling of biologically produced carbon compounds.

Obenhuber, D. C.↗

NASA NTRS1990

An explanation for the rise in T(sub c) in the Tl- and Bi-based high temperature superconductors

Using the plasmon exchange model for the high T(sub c) superconductor, it is shown that the T(sub c) rises with an increase in the number of CuO layers per unit cell, which is in agreement with recent observations in the Tl- and Bi-based compounds. The calculation also suggests that the sample will become superconducting in successive stages and that there is a saturation effect, i.e., that T(sub c) cannot be raised indefinitely by increasing the number of CuO layers.

Bose, S. M.↗

NASA NTRS1991

An explanation for the rise in Tc in the Tl- and Bi-based high temperature superconductors

Bose, S. M.↗

NASA NTRS2004

Temperature Dependence of Density, Viscosity and Electrical Conductivity for Hg-Based II-VI Semiconductor Melts

The relaxation phenomenon of semiconductor melts, or the change of melt structure with time, impacts the crystal growth process and the eventual quality of the crystal. The thermophysical properties of the melt are good indicators of such changes in melt structure. Also, thermophysical properties are essential to the accurate predication of the crystal growth process by computational modeling. Currently, the temperature dependent thermophysical property data for the Hg-based II-VI semiconductor melts are scarce. This paper reports the results on the temperature dependence of melt density, viscosity and electrical conductivity of Hg-based II-VI compounds. The melt density was measured using a pycnometric method, and the viscosity and electrical conductivity were measured by a transient torque method. Results were compared with available published data and showed good agreement. The implication of the structural changes at different temperature ranges was also studied and discussed.

Li, C.↗

NASA NTRS2012

Characterizing of a Mid-Latitude Ice-Rich Landing Site on Mars to Enable in Situ Habitability Studies

We suggest an ice-rich landing site at 188.5E 46.16N within Amazonis Planitia as a candidate location to support a Mars lander mission equipped to study past habitability and regions capable of preserving the physical and chemical signs of life and organic matter. Studies of the ice-rich subsurface on Mars are critical for several reasons. The subsurface environment provides protection from radiation to shield organic and biologic compounds from destruction. The ice-rich substrate is also ideal for preserving organic and biologic molecules and provides a source of H2O for biologic activity. Examination of martian ground ice can test several hypotheses such as: 1) whether ground ice supports habitable conditions, 2) that ground ice can preserve and accumulate organic compounds, and 3) that ice contains biomolecules evident of past or present biological activity on Mars. This Amazonis site, located near the successful Viking Lander 2, shows indirect evidence of subsurface ice (ubiquitous defined polygonal ground, gamma ray spectrometer hydrogen signature, and numerical modeling of ice stability) and direct evidence of exposed subsurface ice. This site also provides surface conditions favorable to a safe landing including no boulders, low rock density, minimal rough topography, and few craters.

Heldmann, J.↗

NASA NTRS2016

An Observationally Constrained Evaluation of the Oxidative Capacity in the Tropical Western Pacific Troposphere

Hydroxyl radical (OH) is the main daytime oxidant in the troposphere and determines the atmospheric lifetimes of many compounds. We use aircraft measurements of O3, H2O, NO, and other species from the Convective Transport of Active Species in the Tropics (CONTRAST) field campaign, which occurred in the tropical western Pacific (TWP) during January-February 2014, to constrain a photochemical box model and estimate concentrations of OH throughout the troposphere. We find that tropospheric column OH (OHCOL) inferred from CONTRAST observations is 12 to 40% higher than found in chemical transport models (CTMs), including CAM-chem-SD run with 2014 meteorology as well as eight models that participated in POLMIP (2008 meteorology). Part of this discrepancy is due to a clear-sky sampling bias that affects CONTRAST observations; accounting for this bias and also for a small difference in chemical mechanism results in our empirically based value of OHCOL being 0 to 20% larger than found within global models. While these global models simulate observed O3 reasonably well, they underestimate NOx (NO +NO2) by a factor of 2, resulting in OHCOL approx.30% lower than box model simulations constrained by observed NO. Underestimations by CTMs of observed CH3CHO throughout the troposphere and of HCHO in the upper troposphere further contribute to differences between our constrained estimates of OH and those calculated by CTMs. Finally, our calculations do not support the prior suggestion of the existence of a tropospheric OH minimum in the TWP, because during January-February 2014 observed levels of O3 and NO were considerably larger than previously reported values in the TWP.

Hydroxyl radical↗

NASA NTRS1977

Thermal alteration experiments on organic matter in recent marine sediments as a model for petroleum genesis

The fate of naturally occurring lipids and pigments in a marine sediment exposed to elevated temperatures was studied. Samples of a young marine sediment from Tanner Basin, California, were heated to a series of temperatures (65-200 C) for varying periods of time (7-64 days). The sediment was analyzed prior to and after heating for pigments, isoprenoid compounds, alcohols, fatty acids, and hydrocarbons. Structural changes caused by heating unextractable organic material (kerogen) were also studied, and the significance of the results for understanding petroleum genesis is considered. Among other results, fatty acids and hydrocarbons increased in abundance although there appeared to be no obvious precursor-to-product relationship via simple decarboxylation reactions. Chlorins were partially converted into porphyrins. The phytyl side chain of pheophytin was initially preserved intact by reduction of the phytyl double bond, but later converted to a variety of isoprenoid compounds including alkanes. Thermal grafting of components onto kerogen occurred as well as structural changes caused by heat.

Baedecker, M. J.↗

NASA NTRS1991

Properties of novel CVD graphite fibers and their bromine intercalation compounds

A hybrid fiber with a PAN core surrounded by a vapor grown carbon fiber (VGCF) sheath was fabricated using a proprietary process. The density, ultimate tensile strength, Young's modulus, and resistivity of pristine and bromine intercalated fibers made by this technique having diameters varying from 5 to 50 microns were compared with the values predicted from the rule of mixtures model. For both the pristine and intercalated fibers, the density, ultimate tensile strength, and Young's modulus of the fibers were lower than predicted, but the resistivity was measured to be consistent with predictions. The lower than theoretical mechanical properties may be evidence of a low density disordered interface between the core and the sheath which would lower the density and degrade the mechanical properties, but would leave the resistivity nearly unaffected. Intercalation had little if any effect on the ultimate tensile strength and Young's modulus, but raised the density by about 11 pct., and lowered the resistivity by an order of magnitude. The diameter dependence of the resistivity showed evidence of a depletion layer of the type found in VGCF.

Gaier, James R.↗

NASA NTRS1992

Properties of hybrid CVD/PAN graphite fibers and their bromine intercalation compounds

Gaier, James R.↗

NASA NTRS1992

Bolide impacts and the oxidation state of carbon in the Earth's early atmosphere

A one-dimensional photochemical model was used to examine the effect of bolide impacts on the oxidation state of Earth's primitive atmosphere. The impact rate should have been high prior to 3.8 Ga before present, based on evidence derived from the Moon. Impacts of comets or carbonaceous asteroids should have enhanced the atmospheric CO/CO2 ratio by bringing in CO ice and/or organic carbon that can be oxidized to CO in the impact plume. Ordinary chondritic impactors would contain elemental iron that could have reacted with ambient CO2 to give CO. Nitric oxide (NO) should also have been produced by reaction between ambient CO2 and N2 in the hot impact plumes. High NO concentrations increase the atmospheric CO/CO2 ratio by increasing the rainout rate of oxidized gases. According to the model, atmospheric CO/CO2 ratios of unity or greater are possible during the first several hundred million years of Earth's history, provided that dissolved CO was not rapidly oxidized to bicarbonate in the ocean. Specifically, high atmospheric CO/CO2 ratios are possible if either: (1) the climate was cool (like today's climate), so that hydration of dissolved CO to formate was slow, or (2) the formate formed from CO was efficiently converted into volatile, reduced carbon compounds, such as methane. A high atmospheric CO/CO2 ratio may have helped to facilitate prebiotic synthesis by enhancing the production rates of hydrogen cyanide and formaldehyde. Formaldehyde may have been produced even more efficiently by photochemical reduction of bicarbonate and formate in Fe(++)-rich surface waters.

Non-NASA Center↗

NASA NTRS2002

Molecular modeling of polymer composite interactions with analytes in electronic nose sensors for environmental monitoring in International Space Station

We report a molecular modeling study to investigate the polymer-carbon black (CB) composite-analyte interactions in resistive sensors. These sensors comprise the JPL Electronic Nose (ENose) sensing array developed for monitoring breathing air in human habitats. The polymer in the composite is modeled based on its stereisomerism and sequence isomerism, while the CB is modeled as uncharged naphthalene rings (with no hydrogens). The Dreiding 2.21 force field is used for the polymer and solvent molecules and graphite parameters are assigned to the carbon black atoms. A combination of molecular mechanics (MM) and molecular dynamics (NPT-MD and NVT-MD) techniques are used to obtain the equilibrium composite structure by inserting naphthalene rings in the polymer matrix. Polymers considered for this work include poly(4- vinylphenol), polyethylene oxide, and ethyl cellulose. Analytes studied are representative of both inorganic (ammonia) and organic (methanol, toluene, hydrazine) compounds. The results are analyzed for the composite microstructure by calculating the radial distribution profiles as well as for the sensor response by predicting the interaction energies of the analytes with the composites.

electronic noise environmental monitoring polymer ↗