SEARCH · Engineering Papers

Results for “mixed conduction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

All sources NASA NTRS DOE OSTI

NASA NTRS1999

Nonmethane Hydrocarbon Measurements on the North Atlantic Flight Corridor During SONEX

Mixing ratios of nonmethane hydrocarbons (NMHCS) were not enhanced in whole air samples collected within the North Atlantic Flight Corridor (NAFC) during the fall of 1997. The investigation was conducted aboard NASA's DC-8 research aircraft, as part of the Subsonic Assessment-Ozone and Nitrogen Experiment (SONEX). NMHC enhancements were not detected within the general Organized Tracking System (OTS) of the NAFC, nor during two tail-chases of the DC-8's own exhaust. Because positive evidence of aircraft emissions was demonstrated by enhancements in both nitrogen oxides and condensation nuclei during SONEX, the NMHC results suggest that the commercial air traffic fleet operating in the North Atlantic region does not contribute significantly to NMHCs in the NAFC.

Simpson, I. J.↗

NASA NTRS1999

Analysis of a Generally Oriented Crack in a Functionally Graded Strip Sandwiched Between Two Homogeneous Half Planes

The driving forces for a generally oriented crack embedded in a Functionally Graded strip sandwiched between two half planes are analyzed using singular integral equations with Cauchy kernels, and integrated using Lobatto-Chebyshev collocation. Mixed-mode Stress Intensity Factors (SIF) and Strain Energy Release Rates (SERR) are calculated. The Stress Intensity Factors are compared for accuracy with previously published results. Parametric studies are conducted for various nonhomogeneity ratios, crack lengths. crack orientation and thickness of the strip. It is shown that the SERR is more complete and should be used for crack propagation analysis.

Shbeeb, N.↗

NASA NTRS2006

Experimental Results of Thin-Film Photovoltaic Cells in a Low Density LEO Plasma Environment: Ground Tests

Plasma ground testing results, conducted at the Glenn Research Center (GRC) National Plasma Interaction (N-PI) Facility, are presented for a number of thin-film photovoltaic cells. The cells represent a mix of promising new technologies identified by the Air Force Research Laboratory (AFRL) under the CYGNUS Space Science Technology Experiment (SSTE-4) Program. The current ground tests are aimed at characterizing the performance and survivability of thin film technologies in the harsh low earth orbital space environment where they will be flown. Measurements of parasitic current loss, charging/dielectric breakdown of cover-slide coatings and arcing threshold tests are performed for each individual cell. These measurements are followed by a series of experiments designed to test for catastrophic arc failure mechanisms. A special type of power supply, called a solar array simulator (SAS) with adjustable voltage and current limits on the supply s output, is employed to bias two adjacent cells at a predetermined voltage and current. The bias voltage is incrementally ramped up until a sustained arc results. Sustained arcs are precursors to catastrophic arc failure where the arc current rises to a maximum value for long timescales often ranging between 30 to 100 sec times. Normal arcs by comparison, are short lived events with a timescale between 10 to 30 sec. Sustained arcs lead to pyrolization with extreme cell damage and have been shown to cause the loss of entire array strings in solar arrays. The collected data will be used to evaluate the suitability of thin-film photovoltaic technologies for future space operations.

Galofaro, Joel T.↗

NASA NTRS2010

Effect of Fluorine on Near-Liquidus Phase Equilibria of Basalts

Volatile species such as H2O, CO2, F, and Cl have significant impact in generation and differentiation of basaltic melts. Thus far experimental work has primarily focused on the effect of water and carbon dioxide on basalt crystallization, liquid-line of descent, and mantle melting [e.g., 1, 2] and the effects of halogens have received far less attention [3-4]. However, melts in the planetary interiors can have non-negligible chlorine and fluorine concentrations. Here, we explore the effects of fluorine on near-liquidus phase equilibria of basalt. We have conducted nominally anhydrous piston cylinder experiments using graphite capsules at 0.6 - 1.5 GPa on an Fe-rich model basalt composition. 1.75 wt% fluorine was added to the starting mix in the form of AgF2. Fluorine in the experimental glass was measured by SIMS and major elements of glass and minerals were analyzed by EPMA. Nominally volatile free experiments yield a liquidus temperature from 1330 C at 0.8GPa to 1400 at 1.6GPa and an olivine(Fo72)-pyroxene(En68)-liquid multiple saturation point at 1.25 GPa and 1375 C. The F-bearing experiments yield a liquiudus temperature from 1260 C at 0.6GPa to 1305 at 1.5GPa and an ol(Fo66)-pyx(En64)-MSP at 1 GPa and 1260 C. This shows that F depresses the basalt liquidus, extends the pyroxene stability field to lower pressure, and forces the liquidus phases to be more Fe-rich. KD(Fe-Mg/mineral-melt) calculated for both pyroxenes and olivines show an increase with increasing F content of the melt. Therefore, we infer that F complexes with Mg in the melt and thus increases the melt s silica activity, depressing the liquidus and changing the composition of the crystallizing minerals. Our study demonstrates that on a weight percent basis, the effect of fluorine is similar to the effect of H2O [1] and Cl [3] on freezing point depression of basalts. But on an atomic fraction basis, the effect of F on liquidus depression of basalts is xxxx compared to the effect of H. Future studies on kimberlitic and subduction zone magmas, which could have significant amount of fluorine, will need to consider the combined effects of F, Cl, and H on their stability and chemical evolution.

Filiberto, Justin↗

NASA NTRS2012

From Kennedy, to Beyond: Growing Plants in Space

Astronauts cannot have their cake and eat it too, but what about growing a salad and eating it? As NASA continues to push the envelope on Space exploration and inhabitance the need for a fresh food source becomes more vital. The Life Support team at NASA is using a system developed by ORBITEC the VEGGIE, in which astronauts aboard the ISS, and potentially the Moon and Mars, will be capable of growing food. The introduction of plants not only gives astronauts a means of independently supplying food, but also recreation, oxygen replenishment and psychological benefits. The plants were grown in "pillows", the system used for growing plants within the VEGGIE. This test included 4 types of media mixtures that are composed of a clay based media called Arcilite and Fafard #2, which is a peat moss-based media ( <1 mm Arcilite, 1-2 mm of Arcilite, 1:1 <1 mm & 1-2 mm mixture and 1:1 Arcilite & Fafard mixture). Currently, 3 lettuce cultivars are being grown in 4 mixtures of media. Tests were being conducted to see which form of media has the ratio of best growth and least amount of microbes that are harmful. That is essential because a person's body becomes more susceptible to illness when they leave Earth. As a result, test must be conducted on the "pillow" system to assess the levels of microbial activity. The cultivars were tested at different stages during their growing process for microbes. Datum show that the mix of Fafard and Arcilite had the best growth, but also the most microbes. This was due to the fact that Fafard is an organic substance so it contains material necessary for microbes to live. Data suggest that the <1 mm Arcilite has an acceptable amount of growth and a lower level of microbes, because it is non-organic.

Flemming, Cedric, II↗

NASA NTRS1986

Transition and mixing in axisymmetric jets and vortex rings

A class of impulsively started, axisymmetric, laminar jets produced by a time dependent joint source of momentum are considered. These jets are different flows, each initially at rest in an unbounded fluid. The study is conducted at three levels of detail. First, a generalized set of analytic creeping flow solutions are derived with a method of flow classification. Second, from this set, three specific creeping flow solutions are studied in detail: the vortex ring, the round jet, and the ramp jet. This study involves derivation of vorticity, stream function, entrainment diagrams, and evolution of time lines through computer animation. From entrainment diagrams, critical points are derived and analyzed. The flow geometry is dictated by the properties and location of critical points which undergo bifurcation and topological transformation (a form of transition) with changing Reynolds number. Transition Reynolds numbers were calculated. A state space trajectory was derived describing the topological behavior of these critical points. This state space derivation yielded three states of motion which are universal for all axisymmetric jets. Third, the axisymmetric round jet is solved numerically using the unsteady laminar Navier Stokes equations. These equations were shown to be self similar for the round jet. Numerical calculations were performed up to a Reynolds number of 30 for a 60x60 point mesh. Animations generated from numerical solution showed each of the three states of motion for the round jet, including the Re = 30 case.

Allen, G. A., Jr.↗

NASA NTRS2007

Thermal Conductivity of Polymer Copoly(Ethylene Vinyl Acetate)/Nano-Filler Blends

The development of flexible, thermally conductive fabrics and plastic tubes for the Liquid Cooling and Ventilation Garment (LCVG) are needed to reduce weight and improve the mobility, comfort, and performance of future spacesuits. Such improvements would allow astronauts to operate more efficiently and safely for extended extravehicular activities. As a continuation of our work on the improvement of thermal conductivity (TC) of polymeric materials, nanocomposites were prepared from copoly(ethylene vinyl acetate), trade name Elvax 260 , metallized carbon nanofibers (CNFs), nickel (Ni) nanostrands, boron nitride both alone and as mixtures with aluminum powder. The nanocomposites were prepared by melt mixing at various loading levels and subsequently fabricated into several material forms (i.e., ribbons, tubes, and compression molded plaques) for analysis. Ribbons and tubes were extruded to form samples in which the nanoparticles were aligned in the direction of flow. The degree of dispersion and alignment of the nanoparticles were investigated using high-resolution scanning electron microscopy. Tensile properties of the aligned samples were determined at room temperature. TC measurements were performed using a laser flash (Nanoflash ) technique. The TC of the samples was measured in both the direction of alignment as well as transverse. Tubing of comparable dimensions to that used in the LCVG was extruded from select compositions and the thermal conductivities of the tubes measured.

Ghose, S.↗

NASA NTRS2007

Thermal Conductivity of Copoly(ethylene vinyl acetate)/Nano-Filler Blends

The development of flexible, thermally conductive fabrics and plastic tubes for the Liquid Cooling and Ventilation Garment (LCVG) are needed to reduce weight and improve the mobility, comfort, and performance of future spacesuits. Such improvements would allow astronauts to operate more efficiently and safely for extended extravehicular activities. As a continuation of our work on the improvement of thermal conductivity (TC) of polymeric materials, nanocomposites were prepared from copoly(ethylene vinyl acetate), trade name Elvax 260TradeMark), metallized carbon nanofibers (CNFs), nickel (Ni) nanostrands, boron nitride both alone and as mixtures with aluminum powder. The nanocomposites were prepared by melt mixing at various loading levels and subsequently fabricated into several material forms (i.e., ribbons, tubes, and compression molded plaques) for analysis. Ribbons and tubes were extruded to form samples in which the nanoparticles were aligned in the direction of flow. The degree of dispersion and alignment of the nanoparticles were investigated using high-resolution scanning electron microscopy. Tensile properties of the aligned samples were determined at room temperature. TC measurements were performed using a laser flash (Nanoflash(TradeMark) technique. The TC of the samples was measured in both the direction of alignment as well as transverse. Tubing of comparable dimensions to that used in the LCVG was extruded from select compositions and the thermal conductivities of the tubes measured.

Ghose, S.↗

NASA NTRS1975

Thermal conductivity of comets

The thermal conductivity of two comet models is calculated. Both models assume the comets to be heterogeneous in composition. One model considers the comet to have a nucleus of water-ice mixed with basaltic and meteoritic material in the form of dust and agglomerated particles surrounded by a layer of water-frost. The second model assumes the frost and water-ice layers have sublimated, leaving a porous structure to some depth composed of solid basaltic and meteoritic material with residual gases. K values are calculated as a function of depth, density, temperature and porosity.

Kumar, G. N.↗

NASA NTRS1980

Scale model performance test investigation of exhaust system mixers for an Energy Efficient Engine /E3/ propulsion system

A scale model performance test was conducted as part of the NASA Energy Efficient Engine (E3) Program, to investigate the geometric variables that influence the aerodynamic design of exhaust system mixers for high-bypass, mixed-flow engines. Mixer configuration variables included lobe number, penetration and perimeter, as well as several cutback mixer geometries. Mixing effectiveness and mixer pressure loss were determined using measured thrust and nozzle exit total pressure and temperature surveys. Results provide a data base to aid the analysis and design development of the E3 mixed-flow exhaust system.

Kuchar, A. P.↗

NASA NTRS1983

An experimental and numerical investigation of the impingement of an oblique shock wave on a body of revolution

Attention is given to the experimental study and numerical simulation of the impingement of oblique shock wave on a cylinder, in order both to document the complex three-dimensional shock wave and boundary layer interaction occurring in practical problems (such as stores carriage interference in a supersonic tactical aircraft) and to conduct a critical comparison of experimental measurements and numerical computations for such complex flows. A thin layer approximation of the Navier-Stokes equations was solved by means of a mixed explicit-implicit scheme. Experimental measurements reveal a highly complex flow field with two distinct adjacent separation zones, regions of high cross flow, and multiply reflected shocks and expansion fans.

Brosh, A.↗

NASA NTRS1982

Automated pixel screening and selection technique

One approach for estimating crop acreage on the basis of Landsat data involves the sampling of portions of Landsat imagery which represent 5 x 6-n mi areas on the ground, taking into account acreage estimates for each of these areas. Difficulties concerning the estimating procedures are related to labeling. These difficulties arise in particular in connection with mixed pixels. The present investigation is concerned with the employment of a suitable automated technique for overcoming these difficulties. A description of the selected technique is presented, and the test conducted for the evaluation of the technique is discussed. It is found that the employed automated pixel screening and selection procedure provides representative samples of the scene. The amount of time spent on pure pixel selection is significantly reduced by using the automated method.

Dailey, C. L.↗

NASA NTRS1985

An intercomparison of nitric oxide measurement techniques

Results from an intercomparison of techniques to measure tropospheric levels of nitric oxide (NO) are discussed. The intercomparison was part of the National Aeronautics and Space Administration's Global Tropospheric Experiment and was conducted at Wallops Island, VA, in July 1983. Instruments intercompared included a laser-induced fluorescence system and two chemiluminescence instruments. The intercomparisons were performed with ambient air at NO mixing ratios ranging from 10 to 60 pptv and NO-enriched ambient air at mixing ratios from 20 to 170 pptv. All instruments sampled from a common manifold. The techniques exhibited a high degree of correlation among themselves and with changes in the NO mixing ratio. Agreement among the three techniques was placed at approximately + or - 30 percent. Within this level of agreement, no artifacts or species interferences were identified.

Hoell, J. M., Jr.↗

NASA NTRS1999

Use of On-Line Tracers as a Diagnostic Tool in General Circulation Model Development: Transport Between the Troposphere and Stratosphere - 2

A key component of climate/chemistry modeling is how to handle the influx into (and egress from) the troposphere. This is especially important when considering tropospheric ozone, and its precursors (e.g., NO(x) from aircraft). A study has been conducted with various GISS models to determine the minimum requirements necessary for producing realistic troposphere-stratosphere exchange. Four on-line tracers are employed: CFC-11 and SF6 for mixing from the troposphere into the stratosphere, Rn222 for vertical mixing within the troposphere, and 14C for mixing from the stratosphere into the troposphere. Four standard models are tested, with varying vertical resolution, gravity wave drag and location of the model top, and additional subsidiary models are employed to examine specific features. The results show that proper vertical transport between the troposphere and stratosphere in the GISS models requires lifting the top of the model considerably out of the stratosphere, and including gravity wave drag in the lower stratosphere. Increased vertical resolution without these aspects does not improve troposphere-stratosphere exchange. The transport appears to be driven largely by the residual circulation within the stratosphere; associated E-P flux convergences require both realistic upward propagating energy from the troposphere, and realistic pass-through possibilities. A 23 layer version with a top at the mesopause and incorporating gravity wave drag appears to have reasonable stratospheric-tropospheric exchange, in terms of both the resulting tracer distributions and atmospheric mass fluxes.

Rind, David H.↗

NASA NTRS2015

A WRF-Chem Analysis of Flash Rates, Lightning-NOx Production and Subsequent Trace Gas Chemistry of the 29-30 May 2012 Convective Event in Oklahoma During DC3

The Deep Convective Clouds and Chemistry (DC3) field campaign in 2012 provided a plethora of aircraft and ground-based observations (e.g., trace gases, lightning and radar) to study deep convective storms, their convective transport of trace gases, and associated lightning occurrence and production of nitrogen oxides (NOx). This is a continuation of previous work, which compared lightning observations (Oklahoma Lightning Mapping Array and National Lightning Detection Network) with flashes generated by various flash rate parameterization schemes (FRPSs) from the literature in a Weather Research and Forecasting Chemistry (WRF-Chem) model simulation of the 29-30 May 2012 Oklahoma thunderstorm. Based on the Oklahoma radar observations and Lightning Mapping Array data, new FRPSs are being generated and incorporated into the model. The focus of this analysis is on estimating the amount of lightning-generated nitrogen oxides (LNOx) produced per flash in this storm through a series of model simulations using different production per flash assumptions and comparisons with DC3 aircraft anvil observations. The result of this analysis will be compared with previously studied mid-latitude storms. Additional model simulations are conducted to investigate the upper troposphere transport, distribution, and chemistry of the LNOx plume during the 24 hours following the convective event to investigate ozone production. These model-simulated mixing ratios are compared against the aircraft observations made on 30 May over the southern Appalachians.

Cummings, Kristin A.↗

NASA NTRS2015

RUMS - Realtime Visualization and Evaluation of Live, Virtual, Constructive Simulation Data

This paper describes the tools and display capabilities being developed to visualize aircraft flight and trajectory information that is produced during a distributed Live, Virtual, Constructive (LVC) simulation events involving a mix of manned and unmanned aircraft. This paper discusses the design approach and general software architecture of the Remote User Monitor Service (RUMS) application. The simulations and flight tests are conducted over a nationwide network with components communicating via software gateways that translate the messages and provide a location to access and collect data. The data collected is not only archived for post-processing and analysis, but also processed in real-time by RUMS, which allows dynamic viewing of the information via a web browser. This real-time dynamic viewing of the data allows test conductors and researchers to monitor the health of the distributed system and of the data being collected not only in situ where tests are conducted but also at remote locations.

distributed simulation↗

NASA NTRS2017

Measuring the Effectiveness of Human Autonomy Teaming

Human-Automation Teaming (HAT), is now recognized as a promising solution to the problems of humans managing increasingly complex work systems. A human-automation team can be defined as the interdependent coupling between one or more human operators and one or more autonomous systems requiring collaboration and coordination to accomplish system and task goals (e.g., Langan-Fox et al., 2009). In this conception, automated agents are considered team members that can operate at various levels of automation, be focused on one or more human-information-processing stages, and the interactions with human operators may be adaptable, adjustable or mixed initiative. We investigated some metrics for assessing HAT effectiveness in a demonstration of a HAT tool used by ground station operators in a Reduced Crew Operations project that was conducted at NASA Ames Human Automation Teaming Laboratory. In this paper, we focus on operator metrics of HAT effectiveness, specifically workload and operator behaviors.

measurements↗

NASA NTRSDate not supplied

TPSAS-NF1676L-33873-DND

NOAA's National Air Quality Forecasting Capability (NAQFC) model provides 48-hour forecast of surface ozone and other atmospheric constituents serving as the nation's key tool actively used by regulatory professionals in assessing air quality events and the issuance of public air quality alerts. NAQFC incorporates input meteorology from North American Mesoscale Model (NAM) at 12 km horizontal resolution that is coupled to the Community Multi-scale Air Quality Model (CMAQ) to predict emissions, tropospheric gas and aerosol chemistry, and related deposition and removal processes. The NAQFC forecast simulations contain 35 steps in altitude, with about one third of these in a typical afternoon daytime boundary layer (0-1.5 km). While several studies have been conducted comparing NAQFC predictions to surface observations, investigations comparing the vertical distribution to observations remain limited. Vertical comparisons are needed in order to fully assess forecast model behavior and atmospheric mixing conditions leading to the formation of ozone at the surface. The Tropospheric Ozone Lidar Network (TOLNet) instruments provide a unique observational capability in this regard, as ozone vertical measurements can be directly compared to models, such as NAQFC, and provide additional insight into atmospheric processes and enhance forecast capabilities. In this study, we utilize multiple TOLNet lidar observations obtained during the Ozone Water Land Environmental Transition Studies (OWLETS-2017 & OWLETS-2018) and the Long Island Sound Tropospheric Ozone Study (LISTOS-2018) to compare with NAQFC vertical predictions of ozone. These campaigns took place at different coastal locations along the US East coast with each campaign having multiple TOLNet lidars present, providing a unique opportunity to examine vertical structure of ozone in regions with complex water-land boundaries. Preliminary comparison results will be presented on ozone temporal and vertical differences between NAQFC and the TOLNet lidars along with example case studies to illustrate insights into boundary layer and surface processes of trace gases.

Timothy Berkoff↗