Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “methane conversion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Mechanistic pathways and role of oxygen in oxidative coupling of methane derived from transient kinetic studies

Oxidative coupling of methane (OCM) is a promising industrial process to upgrade natural gas to high value chemicals. In this study, Temporal Analysis of Products (TAP) and steady-state experiments were conducted to distinguish how the composition of surface and gas phase oxygen influence mechanistic details of the selective conversion of CH 4 to C 2 H 4 over the Mn-Na 2 WO 4 /SiO 2 catalyst. The results from TAP studies indicate that methane activation on this catalyst proceeds predominantly via a short-lived, transient surface oxygen species and there is a competition for this species to form either CO or methyl radicals on the surface. This active species has a total lifetime of 3 s and is identified to have a dioxygen (e.g. O 2 2- or O 2 -) form. We show that the concentration of the transient surface oxygen species significantly impacts the OCM performance. Oxygen attributed to the catalyst lattice (in a singular form e.g., O - ), is found to activate methane to a lesser degree, but exclusively forms CO 2 . Evidence for these surface pathways for methyl radical, CO and CO 2 formation identified by TAP are also validated through steady-state experiments. Finally, by distinguishing different catalyst oxygen species and their role in selective/nonselective pathways, important screening criteria have been identified for the advancement of superior catalyst formulations.

36 MATERIALS SCIENCE↗

A Scaling Study of Microbially-Enhanced Methane Production From Coal (Mecbm): Optimizing Nutrient Delivery For Maximized Methane Production

Microbially-enhanced coalbed methane (MECBM) recovery is a novel method to stimulate gas production in CBM reservoirs. We first develop suitable nutrient recipes for native coals from sites each in the Illinois Basin and in the San Juan Basin. The optimal concentrations for statistically significant parameters are identified and the methane yields at laboratory scale are obtained (Part I & II). We then demonstrate the importance of replicating truly in-situ conditions for bio- gasification studies by investigating methane productivity in a core holder simulating in-situ conditions. Based on the experimental results, the resulting gas production correlates positively with the permeability of the samples. We examine the deliverability of engineered microbial solutions to promote coal bioconversion in coals and demonstrate that greater than milli-darcy permeability is required under in-situ stress conditions (Part III). This constraint is supplemented by imaging and a fractal-based characterization approach to evaluate changes in the physical properties of coal due to bio-gasification. High resolution SEM imaging is used to observe swelling of the coal matrix with sub-micron wide continuous pores observed to persist even after microbial treatment (IV). We explore the potential of generating, propping-open and sustaining the functionality of hydraulic fractures in coal using different fracturing fluids (Part V). The alteration of the nano-pore structure due to MECBM treatment is examined by using small angle X-ray scattering (SAXS) to define the in-situ porosity evolution as a proxy to infer permeability evolution (Part VI). Coupled hydro-mechanical and bio-gasification modeling is applied to determine the effectiveness of nutrient delivery by hydraulic fracturing and its field implementation. Compared with both the unstimulated and hydro-shear-dilated cases of the natural fracture network, hydraulic fracturing demonstrates a significant improvement to enhance nutrient delivery. A preliminary analysis of field-scale methane yield is completed with consideration of the combined influence of permeability evolution, solute transport and microbial growth (Part VII). Developing nutrient solutions for Illinois Basin and San Juan Basin (Task 2): To enhance methane release from coal through bio-gasification, suitable nutrient solutions are needed to stimulate microbial activities toward coal depolymerization and conversion to biogas. Specific for bituminous coal in the Illinois basin, a nutrient recipe that can be used to enhance coal bio- gasification in situ is developed. Based on our previous experience working with Illinois coal and the characteristics of the formation water and the indigenous microbial community, four parameters, Fe powder, methanol, ethanol, and trace minerals are optimized through using a Box-Behnken design. The optimal condition predicted by the models is: Fe-powder at 74 mM, methanol at 97.91 mM, ethanol at 100 mM, and trace minerals at 100%. Under these conditions, the predicted methane yield and content is 1,417.35 ft 3 /ton and 80.7%, respectively. These results are then validated by experimental studies. In addition, each added component is evaluated in terms of its contribution to methane generated. Specifically, the role of coal in the bio-gasification process is studied against two other solid materials. Experimental data from different solid matrices prove that coal is indeed degraded by the studied microbial community.

01 COAL, LIGNITE, AND PEAT↗

Methanol Conversion for the Production of Hydrogen

The production of methanol from a variety of biomass sources is gaining favor. Several facilities exist or are under construction throughout the world to convert biogenerated methane from the decomposition of biomass into methanol using conventional steam reforming. Methanol is an excellent liquid-hydrogen-transport medium. When powered by hydrogen, fuel cells have the potential to be the cleanest and most efficient source of electricity for use by the automotive industry. On-board reforming of liquid hydrocarbon fuels is a viable alternative to the storage of compressed hydrogen. A problem in current reforming processes is the quantity of carbon monoxide (CO) produced. Our research is geared toward circumventing the production of carbon monoxide in methanol reforming through the development of novel reforming catalysts. By modifying a copper-based catalyst, we have produced several catalysts that retain their activity and high surface area after extended methanol reforming runs both with and without the addition of steam.

03 NATURAL GAS↗

Anaerobic co-digestion of sugarcane press mud with vinasse on methane yield

Highlights: • Press mud and vinasse co-digestion was investigated. •Methane yield during co-digestion was 64% higher to mono-digestion. • Press mud and vinasse co-digestion increased process stability. - Abstract: The conversion efficiency of high solids waste digestion as sugarcane press mud (P) may be limited due to hydrolysis step. The option of co-digestion with vinasse, main liquid waste generated from ethanol production, was investigated under batch regime at mesophilic conditions (37.5 ± 1 °C) and the best mixture was evaluated under semicontinuous regime in stirred-tank reactors. The maximum values for methane yield in batch tests were for V{sub 75}/P{sub 25} and V{sub 50}/P{sub 50} mixtures (on basis of the chemical oxygen demand (COD) percentage added in the mixture), with an average value of 246 N mL CH{sub 4} g{sup −1} COD{sub fed}, which was 13% higher than that of press mud alone. A highest methane production rate of 69.6 N mL CH{sub 4} g{sup −1} COD{sub fed}{sup −1} d{sup −1} was obtained for the mixtureV{sub 75}/P{sub 25}. During the experiment carried out in CSTR reactors, the organic loading rate (OLR) was increased from 0.5 up to 2.2 g VS L{sup −1} d{sup −1}. Methane yields of 365 L CH{sub 4} kg{sup −1} VS and biogas productivities of 1.6 L L{sup −1} were obtained in co-digestion, which was 64% higher in comparison to mono-digestion. The performance of the process in mono-digestion was less stable than in co-digestion, with a significant fall of methane yield to 1.8 kg VS m{sup −3} d{sup −1}, and a partial inhibition of the methanogenic archaeas when the OLR was increased up to 2.2 kg VS m{sup −3} d{sup −1}. The co-digestion of vinasse with press mud is a good option for the treatment of streams at the alcohol-sugar industry.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Dual function materials (Ru+Na 2 O/Al 2 O 3 ) for direct air capture of CO 2 and in situ catalytic methanation: The impact of realistic ambient conditions

Here a dual function material (DFM) comprised of 1% Ru, 10% Na 2 O/γ–Al 2 O 3 was studied for combined direct air capture (DAC) of CO 2 and catalytic methanation in a temperature swing operation. In the newly proposed operation, the DFM captures CO 2 (400 ppm) from air at ambient conditions. The material is then heated in H 2 to a temperature sufficient for catalytic conversion of the captured CO 2 to renewable natural gas. In this study, we demonstrate high CO 2 adsorption capacity and rates at ambient conditions (25 °C); the adsorbed CO 2 is then successfully catalytically methanated upon heating in H 2 . Adsorption was also carried out in humid conditions, more closely simulating ambient air. Adsorption and methane production were greatly improved with stable initial performance. The rate of adsorption is shown to be flowrate-dependent, which is critical for future reactor design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhancing Value-Added CO Production from CO 2 Hydrogenation by Tailoring the Ru-CeO 2 Interface on MgO

Catalytic CO 2 hydrogenation presents a promising route for converting CO 2 into valuable products, contributing to the mitigation of net CO 2 emissions. Supported Ru catalysts have recently gained considerable attention due to their tunability for 100% CO selectivity via the reverse water-gas shift pathway, effectively suppressing the competing methanation route. However, despite achieving full CO selectivity, the overall CO yield remains limited by low CO 2 conversion, necessitating further improvement. In this work, CeO 2 was introduced to modify a Ru/MgO single-atom catalyst for CO 2 hydrogenation. The resulting Ru-CeO 2 /MgO catalyst, featuring abundant Ru-CeO 2 interfacial sites, exhibited a favorable balance of CO 2 conversion and CO selectivity, delivering the highest CO yield (32.5% at 500 °C), which is 9.0 and 1.8 times higher than that on Ru/MgO (3.6%) and Ru/CeO 2 (18.4%), respectively. Although the CO selectivity was slightly compromised due to enhanced CO binding at Ru-CeO 2 interfacial sites, H 2 was more efficiently activated at these interfaces and readily reacted with CO 2 adsorbed on CeO 2 -MgO surfaces, thereby boosting the CO 2 hydrogenation activity and CO yield. This study underscores the critical role of Ru-metal oxide interface engineering in improving CO yield and advancing the rational design of highly efficient Ru catalysts for CO production from CO 2 hydrogenation.

36 MATERIALS SCIENCE↗

CO 2 to Fuels Through Novel Electrochemical Catalysis (Final Report)

Electrochemical upgrading of CO 2 into hydrocarbon fuels via CO 2 –H 2 O co-electrolysis using solid oxide electrolysis cells (SOECs) presents an encouraging approach to cost-effective storage of renewable power. In this study, we harness the unique property of protonic ceramic electrolysis cells (PCEC) and demonstrate direct electro-catalytic production of CH 4 from CO 2 –H 2 O in a unit-cell stack configuration. The unit-cell stack was developed to evaluate the scalability and the applicability of PCECs from a broader system-level viewpoint. Tradeoffs between operating conditions and performance metrics were explored and thoroughly characterized. An exceptional CH 4 -yield ratio of 34.6% from only CO 2 –H 2 O reactants was achieved under an electrolysis current of 1 A cm –2 at 450 °C. With exhaust-H 2 recycle, this value was boosted to greater than 70%. In addition, the electrochemical co-conversion of CO 2 –H 2 O offers a higher CH 4 -yield ratio compared to traditional thermo-catalytic conversion of CO 2 –H 2 under certain operating conditions, indicating possible electrochemical promotion of catalytic CO 2 methanation. The demonstrated good performance is a promising result for further scale-up and for the practical utilization of electrochemical CO 2 upgrade using PCECs. Techno-economic analyses reveal operating conditions that yield cost-competitive levelized cost of fuel production.

01 COAL, LIGNITE, AND PEAT↗

Editorial: Microbial C1 Metabolism and Biotechnology

Archaea and bacteria with the capacity to utilize one-carbon (C1) molecules as carbon and energy sources are widespread across the planet and are important players in many biogeochemical processes. As such, they occupy an array of diverse anaerobic and aerobic niches and perform unique metabolisms that enable the utilization of carbon dioxide (CO 2 ), carbon monoxide (CO), formate (HCOOH), methanol (CH 3 OH), and methane (CH 4 ) for growth. Several industrial processes have been developed that leverage these microbes for the targeted conversion of anthropogenic waste gases that contain C1 molecules, including natural gas (CH 4 ), anaerobic digestion-derived biogas (CH 4 and CO 2 ), industrial flue gas (CO 2 and CO), and syngas (CO 2 , CO, and H 2 ) (Figure 1). Further, there is increasing interest in electrochemical reduction of CO 2 to CO, CH 4 , and intermediates with increased solubility compared to gaseous C1 molecules (formate and methanol) using electrons derived from renewable sources like wind, solar, or hydrothermal systems to mitigate atmospheric greenhouse gas. Thus, C1-utilizing microbes will likely play an integral role in biotechnologies that are part of a sustainable, circular bioeconomy. However, fundamental knowledge gaps into the metabolism and physiology of these microbes exist that limit their utility as biocatalysts for carbon-efficient biomanufacturing. This special topic presents studies focused on the fundamental aspects of C1 metabolism in diverse microbial systems with the ability to convert anthropogenic greenhouse gases into valuable products.

59 BASIC BIOLOGICAL SCIENCES↗

Conversion of landfill gas to liquid fuels through a TriFTS (tri-reforming and Fischer–Tropsch synthesis) process: a feasibility study

Biogas produced in landfills contains large amounts of methane (a potent greenhouse gas) and hence requires collection and treatment according to EPA regulations. Tri-reforming of such biogas (CH 4 + CO 2 ) is a combination of dry reforming, steam reforming, and partial oxidation to produce syngas (CO + H 2 ). This syngas can be converted to liquid hydrocarbons using Fischer–Tropsch Synthesis (FTS). A novel technology of combining tri-reforming and FTS (TriFTS) is proposed and utilized here to convert landfill gas (LFG) to high value added liquid hydrocarbon fuels such as gasoline, diesel, and jet fuel. This article explores the feasibility of TriFTS from an experimental and process economics point of view. Landfill gas collected from a local landfill was used in this study. After removing contaminant gases such as H 2 S and NH 3 via condensation and adsorption, NiMg/Ce 0.6 Zr 0.4 O 2 pellets were used in a tri-reforming reactor to produce H 2 and CO in a ratio suitable for FTS. The conversions of CH 4 and CO 2 were 99% and 60%, respectively. The H 2 /CO molar ratio was 1.7. In the FTS section, a Co/SiO 2 eggshell catalyst was used to synthesize liquid hydrocarbon with high selectivity for middle distillate cuts. The CO conversion in FTS was 71% and the liquid hydrocarbon product was similar to that of low sulfur diesel. The experimental results were used to conduct a preliminary economic analysis of a commercial scale TriFTS process. The results indicate that 45% of the energy contained in the LFG can be recovered in the liquid fuel generated, with the rest going to meet the energy demands of the conversion process including heat losses. The breakeven cost of diesel fuel produced was estimated as $3.24 per gal but reduces to 2.71 per gal if the LFG is assumed to be free of cost as would be the case for landfill operators. Additional renewable fuel credits will make the process even more economically attractive. This study suggests that conversion of LFG to liquid fuels is a promising new technology ripe for commercialization.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Chemical Processing in High-Pressure Aqueous Environments. 9. Process Development for Catalytic Gasification of Algae Feedstocks

Through the use of a metal catalyst, gasification of wet algae slurries can be accomplished with high levels of carbon conversion to gas at relatively low temperature (350 C). In a pressurized-water environment (20 MPa), near-total conversion of the organic structure of the algae to gases has been achieved in the presence of a supported ruthenium metal catalyst. The process is essentially steam reforming, as there is no added oxidizer or reagent other than water. In addition, the gas produced is a medium-heating value gas due to the synthesis of high levels of methane, as dictated by thermodynamic equilibrium. As opposed to earlier work, biomass trace components were removed by processing steps so that they did not cause processing difficulties in the fixed catalyst bed tubular reactor system. As a result, the algae feedstocks, even those with high ash contents, were much more reliably processed. High conversions were obtained even with high slurry concentrations. Consistent catalyst operation in these short-term tests suggested good stability and minimal poisoning effects. High methane content in the product gas was noted with significant carbon dioxide captured in the aqueous byproduct in combination with alkali constituents and the ammonia byproduct derived from proteins in the algae. High conversion of algae to gas products was found with low levels of byproduct water contamination and low to moderate loss of carbon in the mineral separation step.

01 COAL, LIGNITE, AND PEAT↗

Modified Ceria for “Low–Temperature” CO 2 Utilization: A Chemical Looping Route to Exploit Industrial Waste Heat

Efficient CO 2 utilization is key to limit global climate change. Carbon monoxide, which is a crucial feedstock for chemical synthesis, can be produced by splitting CO 2 . However, existing thermochemical routes are energy intensive requiring high operating temperatures. A hybrid redox process (HRP) involving CO 2 –to–CO conversion using a lattice oxygen–deprived redox catalyst at relatively low temperatures (<700 °C) is reported. The lattice oxygen of the redox catalyst, restored during CO 2 –splitting, is subsequently used to convert methane to syngas. Operated at temperatures significantly lower than a number of industrial waste heat sources, this cyclic redox process allows for efficient waste heat–utilization to convert CO 2 . To enable the low temperature operation, lanthanum modified ceria (1:1 Ce:La) promoted by rhodium (0.5 wt%) is reported as an effective redox catalyst. Near–complete CO 2 conversion with a syngas yield of up to 83% at low temperatures is achieved using Rh–promoted LaCeO 4–x . While La improves low–temperature bulk redox properties of ceria, Rh considerably enhances the surface catalytic properties for methane activation. Density functional theory calculations further illustrate the underlying functions of La–substitution. In conclusion, the highly effective redox catalyst and HRP scheme provide a potentially attractive route for chemical production using CO 2 , industrial waste heat, and methane, with appreciably lowered CO 2 emissions.

03 NATURAL GAS↗

Ligation of Single-Site Ruthenium within Perovskite Oxides for Efficient Conversion of Thermodynamically Stable Molecules

Ru cation ligation in SrTiO 3 perovskite and their migration to the surface through exsolution are investigated for the dry reforming of methane (DRM), a chemistry that requires activation of two thermodynamically stable molecules, CH 4 and CO 2 . Compared to a supported 1 wt % Ru/SrTiO 3 benchmark, doped and exsolved Ru-SrTiO 3 demonstrate ≥3× higher CH 4 turnover rates (873 K), with isolated, ligated Ru exhibiting higher reactivity. Reactor studies assert that CH 4 and CO 2 activation are both kinetically relevant for CH 4 turnover rates on exsolved Ru-SrTiO 3 , unlike for supported Ru systems, where H-abstraction from CH 4 is the sole kinetically relevant step. As such, exsolved and doped Ru architectures are responsive toward co-reactant activation strategies, with their consequent reaction networks showing marked departures from those established for supported Ru catalysts. In situ spectroscopy and kinetic analyses propose distinct sensitivity toward CO 2 on Ru-SrTiO 3 systems, where higher CH4 turnover rates result from O-assisted C─H bond activation pathways. These pathways occur on paired Ru-oxygen vacancy sites that are inherent to the perovskite structure and are not readily accessible on supported Ru catalysts. Here, CO 2 is activated on oxygen vacancies directly adjacent to Ru active sites, which facilitates CH 4 C─H bond activation through a surface methoxy intermediate. The high reactivity of Ru-SrTiO 3 systems enables stable CH 4 turnover rates at milder reaction temperatures (673 K), conditions under which the supported counterpart, Ru/SrTiO 3 , is inactive. Overall, this work demonstrates that ligation of catalytically active cations in perovskite oxides facilitates site engineering toward atom-efficient activation of thermodynamically stable feedstocks.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Development of eye-safe lidar for aerosol measurements

Research is summarized on the development of an eye safe Raman conversion system to carry out lidar measurements of aerosol and clouds from an airborne platform. Radiation is produced at the first Stokes wavelength of 1.54 micron in the eye safe infrared, when methane is used as the Raman-active medium, the pump source being a Nd:YAG laser at 1.064 micron. Results are presented for an experimental study of the dependence of the 1.54 micron first Stokes radiation on the focusing geometry, methane gas pressure, and pump energy. The specific new technique developed for optimizing the first Stokes generation involves retroreflecting the backward-generated first Stokes light back into the Raman cell as a seed Stokes beam which is then amplified in the temporal tail of the pump beam. Almost 20 percent conversion to 1.54 micron is obtained. Complete, assembled hardware for the Raman conversion system was delivered to the Goddard Space Flight Center for a successful GLOBE flight (1989) to measure aerosol backscatter around the Pacific basin.

Singh, Upendra N.↗

Upgrading Biogas through in situ Conversion of Carbon Dioxide to Biomethane in Anaerobic Digesters

Organic waste streams generated by wastewater treatment plants, agricultural operations, and food processing industries represent an important yet underutilized opportunity for renewable energy production in the United States. Through anaerobic digestion, these waste streams can produce biogas, a mixture primarily composed of methane (CH4) and carbon dioxide (CO2), that can be upgraded to pipeline-quality natural gas. However, most existing upgrading technologies remove CO2 from biogas rather than utilizing it, leaving a significant portion of the potential energy unused. This project investigates a novel biological upgrading approach that converts CO2 into additional CH4 by supplying hydrogen (H2) to specialized microorganisms capable of performing hydrogenotrophic methanation. The main challenges associated with biological biogas upgrading are related to hydrogen supply, gas-liquid mass transfer, and process stability. First, due to the high cost of hydrogen gas, it is preferable that H2 be produced on-site using renewable energy sources such as wind or solar power. Second, hydrogen has low solubility in liquids, which limits its availability to microorganisms and requires strategies to improve gas dissolution and transfer within the reactor. Third, process inhibition may occur as a result of increased pH caused by CO2 consumption or elevated H2 partial pressure, both of which can negatively affect methanogenic activity. Although research in these areas has advanced during the course of this project, these challenges have not yet been fully resolved. To date, the biological systems that have achieved the highest methane concentrations are typically ex-situ reactors, where operational conditions can be more easily controlled. For this reason, the findings of the present project remain highly relevant. The project goal was to develop an innovative system that can accomplish biogas upgrading via biological conversion of CO2 to CH4, in a novel hybrid approach that combines the advantages of both in-situ and ex-situ systems. The proposed system employs a three-phase upflow anaerobic bioreactor with H2 delivery through a gas-permeable membrane, enabling efficient hydrogen transfer and microbial conversion. Under optimized operating conditions, the system achieved 99% H2 consumption and 90% CO2 conversion. A subsequent gas cleaning stage was implemented to further improve gas quality and meet target purity standards. The upgraded gas composition reached 97.7% CH4, 2.2% CO2, and 0.97% O2, while H2S concentrations remained below detection limits. In addition, a flue gas-driven inorganic thermoelectric generator (TEG) system was designed and experimentally validated as a potential source of electricity for H2 production. The system consisted of six TEG modules connected in series and achieved an open-circuit voltage of 4.5 V and a maximum power output of 224 mW at a temperature difference of approximately 53.5 °C, demonstrating effective conversion of waste heat into electrical power under simulated flue gas conditions. Finally, a comprehensive techno-economic analysis was completed to evaluate the capital and operating costs associated with the proposed system. The results provide important insights to guide future scale-up, optimization, and potential deployment of integrated biological biogas upgrading technologies.

09 BIOMASS FUELS↗

Aqueous Phase Reforming of Glycerol for Hydrogen Production Over Pt-Re Supported on Carbon

Hydrogen production from the aqueous phase reforming of glycerol over several 3%Pt-Re/C catalysts (1-4.5% Re) has been studied in the absence and presence of base, and the results compared with a Re-free 3%Pt/C catalyst. Although the Pt/C catalyst is very selective toward the production of hydrogen, catalytic activity is low. Addition of Re significantly increases the conversion of glycerol, at some loss of hydrogen selectivity to light hydrocarbons and water-soluble oxygenates. Addition of 1%KOH to the feedstock increases the selectivity of the Pt-Re/C catalysts toward hydrogen, but selectivity toward aqueous phase oxygenates also increases except for 3%Pt-3%Re/C, where it remains constant. The increase in hydrogen selectivity with base addition arises primarily from reducing the selectivity toward methane and higher alkanes, products that consume H2. For comparison, KOH addition to the glycerol feed with the Re-free 3%Pt/C catalyst provides an increase in glycerol conversion but results in a decline in both H2 and alkanes relative to aqueous phase oxygenates. This indicates that alternative pathways have been enabled by base addition. The highest hydrogen productivity among the catalysts tested is achieved with a 3%Pt-3%Re/C catalyst with added KOH base, but this hydrogen productivity declines with time on stream. The observed product distributions as well as deactivation with base can be understood in terms of the different reaction pathways that become emphasized depending on catalyst composition and pH.

03 NATURAL GAS↗

The Role of Rhenium in the Conversion of Glycerol to Synthesis Gas Over Carbon Supported Platinum-Rhenium Catalysts

Reaction kinetics measurements were carried out to study the conversion of aqueous solutions of glycerol (30 and 80 wt%) over carbon-supported Pt and Pt-Re catalysts at temperatures from 483 to 523 K. The results of these studies show that the turnover frequencies for production of H2, CO, CO2, and light alkanes (primarily methane) all increase upon the addition of Re to Pt/C catalysts. The molar ratio of H2/CO increases, while the CO/CO2 ratio decreases with Re addition, indicating increased rate of water-gas shift. For glycerol conversion over a Pt-Re/C catalyst with an atomic Pt:Re ratio of 1:1, increasing pressure or decreasing temperature leads to an increase in the production of alkanes and light oxygenated hydrocarbons (ethanol, methanol, propanediols, and acetone) at the expense of CO and CO2. Temperature-programmed desorption studies and microcalorimetric measurements indicate that addition of Re to Pt modifies the interaction of CO with surface sites. X-ray absorption spectroscopy and transmission electron microscopy studies provide evidence indicating that Pt-Re/C catalysts consist primarily of bimetallic nanoparticles with sizes below 2 nm, and Re inhibits the sintering of these nanoparticles during reaction conditions for glycerol conversion. The results of these reaction kinetic studies and characterization studies indicate that the performance of Pt-Re/C catalysts for glycerol conversion is related to the formation of Pt-Re nanoparticles, for which Re promotes the overall rate of glycerol reforming by reducing the binding energy of CO to Pt, thereby leading to less extensive blocking of surface sites by reaction intermediates and/or products. In addition, the presence of Re facilitates water-gas shift and Csingle bondO bond cleavage reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗