Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “materials processing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Development of materials and process technology for dual alloy disks

Techniques for the preparation of dual alloy disks were developed and evaluated. Four material combinations were evaluated in the form of HIP consolidated and heat treated cylindrical and plate shapes in terms of elevated temperature tensile, stress rupture and low cycle fatigue properties. The process evaluation indicated that the pe-HIP AF-115 rim/loose powder Rene 95 hub combination offered the best overall range of mechanical properties for dual disk applications. The feasibility of this dual alloy concept for the production of more complex components was demonstrated by the scale up fabrication of a prototype CFM-56 disk made from this AF-115/Rene 95 combination. The hub alloy ultimate tensile strength was approximately 92 percent of the program goal of 1520 MPa (220 ksi) at 480 C (900 F) and the rim alloy stress rupture goal of 300 hours at 675 C (1250 F)/925 MPa (134 ksi) was exceeded by 200 hours. The low cycle fatigue properties were equivalent to those exhibited by HIP and heat treated alloys. There was an absence of rupture notch sensitivity in both alloys. The joint tensile properties were approximately 85 percent of the weaker of the two materials (Rene 95) and the stress rupture properties were equivalent to those of the weaker of the two materials (Rene 95).

Marder, J. M.↗

Nonequilibrium thermodynamics of dilute polymer solutions in flow

Modern materials processing applications and technologies often occur far from equilibrium. To this end, the processing of complex materials such as polymer melts and nanocomposites generally occurs under strong deformations and flows, conditions under which equilibrium thermodynamics does not apply. As a result, the ability to determine the nonequilibrium thermodynamic properties of polymeric materials from measurable quantities such as heat and work is a major challenge in the field. Here, we use work relations to show that nonequilibrium thermodynamic quantities such as free energy and entropy can be determined for dilute polymer solutions in flow. In this way, we determine the thermodynamic properties of DNA molecules in strong flows using a combination of simulations, kinetic theory, and single molecule experiments. We show that it is possible to calculate polymer relaxation timescales purely from polymer stretching dynamics in flow. We further observe a thermodynamic equivalence between nonequilibrium and equilibrium steady-states for polymeric systems. In this way, our results provide an improved understanding of the energetics of flowing polymer solutions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cut–and–chip harvester material capacity and fuel performance on commercial-scale willow fields for varying ground and crop conditions

Shrub willow (Salix spp.) is capable of producing commercially attractive amounts of biomass in short rotations, but harvesting costs and logistics remain a concern. There is a particular need for information about harvesting operations on larger, commercial short–rotation woody crop systems. Another recent issue on commercial fields in northern New York is commercial growers conducting harvests during the growing season rather than the recommended dormant season when fields may be too wet to harvest. This study evaluated and modeled the in–field performance of a cut–and–chip harvester for almost 700 wagonloads of chips operating in commercial willow fields in a wider array of crop and field conditions than have been previously reported. Analysis indicated that the time of harvest (leaf–on or leaf–off) and whether site conditions were wet or dry affected the harvester's material capacity. Mean material capacity was greatest for leaf–off, dry conditions (71.8 Mg/hr) and lowest for leaf–on harvests, which were similar for wet (30.4 Mg/hr) and dry conditions (29.7 Mg/hr). Mean crop specific fuel consumption ranged between 1.3 and 3.3 L/Mg, but can get considerably higher for standing biomasses below 40 Mg/ha. Wet ground conditions and leaf–on harvests tend to decrease material capacity and increase fuel consumption as the harvester has to divert power to forward movement and material processing. Relationships for material capacity and fuel consumption based on standing biomass, time of harvest and ground conditions will be essential for evaluating and modeling the economic and environmental impacts of commercial–scale willow operations.

09 BIOMASS FUELS↗

Space processing economics

Two types of space processing operations may be considered economically justified; they are manufacturing operations that make profits and experiment operations that provide needed applied research results at lower costs than those of alternative methods. Some examples from the Skylab experiments suggest that applied research should become cost effective soon after the space shuttle and Spacelab become operational. In space manufacturing, the total cost of space operations required to process materials must be repaid by the value added to the materials by the processing. Accurate estimates of profitability are not yet possible because shuttle operational costs are not firmly established and the markets for future products are difficult to estimate. However, approximate calculations show that semiconductor products and biological preparations may be processed on a scale consistent with market requirements and at costs that are at least compatible with profitability using the Shuttle/Spacelab system.

Bredt, J. H.↗

Lessons learned from the development and manufacture of ceramic reusable surface insulation materials for the space shuttle orbiters

Three ceramic, reusable surface insulation materials and two borosilicate glass coatings were used in the fabrication of tiles for the Space Shuttle orbiters. Approximately 77,000 tiles were made from these materials for the first three orbiters, Columbia, Challenger, and Discovery. Lessons learned in the development, scale up to production and manufacturing phases of these materials will benefit future production of ceramic reusable surface insulation materials. Processing of raw materials into tile blanks and coating slurries; programming and machining of tiles using numerical controlled milling machines; preparing and spraying tiles with the two coatings; and controlling material shrinkage during the high temperature (2100-2275 F) coating glazing cycles are among the topics discussed.

Banas, R. P.↗

Transport processes research

Fundamental research in reduced gravity on transport processes occurring during crystallization and/or during solidification processes was studied. The details of the transport processes in various materials processing modes will be systematically studied. A Shuttle experiment will be planned to provide a better understanding of the role of fluid motion on the formation of morphological patterns and roles of these patterns in solid composition. The approach to the research will involve theoretical modeling of transport processes, non-incursive ground-based laboratory measurements of model systems, and the definition of requirements for space experimentation.

Saville, D. A.↗

Vacuum pumps and systems: A review of current practice

A review of the fundamental characteristics of the many types of vacuum pumps and vacuum pumping systems is given. The optimum pumping range, relative cost, performance limitations, maintenance problems, system operating costs and similar subjects are discussed. Experiences from the thin film deposition, chemical processing, material handling, food processing and other industries, as well as space simulation are used to support conclusions and recommendations.

Giles, Stuart↗

Accelerating Innovation: Turning Goals into Reality

The success of NASA's programs depends upon innovation, which is recognized by several characteristics. All aspects of a program including tools, processes, materials, subsystems, vehicles, and operations should be evaluated to determine possible innovations which might be implemented. Several examples are presented of ways in which innovation has substantially furthered the goals of NASA. The specific fields mentioned include high performance computing, advanced technologies for aerospace system design, advanced materials and manufacturing processes, neural based flight control, linear aerospike engines, advanced space propulsion systems, high altitude and long duration autonomous flights, advanced vehicle concepts, advanced space propulsion systems, as well as advanced weather information. A final list details the perceived ways in which NASA can benefit from continued innovation in such ways as partnering with the private sector.

VanDalsem, William R.↗

Controlled zone microwave plasma system

An apparatus and method for initiating a process gas plasma. A conductive plate having a plurality of conductive fingers is positioned in a microwave applicator. An arc forms between the conductive fingers to initiate the formation of a plasma. A transport mechanism may convey process materials through the plasma. A spray port may be provided to expel processed materials.

47 OTHER INSTRUMENTATION↗

Planar controlled zone microwave plasma system

An apparatus and method for initiating a process gas plasma. A conductive plate having a plurality of conductive fingers is positioned in a microwave applicator. An arc forms between the conductive fingers to initiate the formation of a plasma. A transport mechanism may convey process materials through the plasma. A spray port may be provided to expel processed materials.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Elevated-temperature cyclic properties of advanced manufactured materials

Microreactor developers at the 2019 GAIN Microreactors workshop expressed a need for advanced manufacturing to fabricate microreactor components. Powder metallurgy (PM) hot isostatic pressing (HIP) is more mature than other advanced manufacturing techniques for the following reasons: 1. a code case exists for Section III, Division 1, Subsection NB components of light water reactors to be manufactured using PM HIP Alloy 316L, and 2. tensile and creep properties have been shown to be equivalent to wrought material for Type 316 stainless steel and Grade 91. Thus, PM HIP is more readily deployable in the near term. Elevated-temperature cyclic properties of PM-HIP materials, however, have not been established. The scope of testing for Code qualification could be significantly reduced compared to a new material for the following reasons: 1. only a limited amount of time consuming creep testing would be required, and 2. testing of fatigue and creep-fatigue behavior could be reduced if it can be demonstrated that the properties are comparable to wrought material. The objective of this work package is to develop an understanding of the relationship of advanced materials processing on the material characteristics as they relate to elevated-temperature component design and construction. This will be achieved by the following: • Elevated-temperature fatigue and creep-fatigue testing of PM HIP and wrought Alloy 316L. • Fracture and microstructural characterization of the PM HIP and wrought Alloy 316L. • Analysis of the elevated-temperature fatigue and creep-fatigue properties of PM HIP Alloy 316L. • Draft a report evaluating the elevated-temperature fatigue and creep-fatigue properties of PM HIP Alloy 316L. • Pursue procurement of Alloy 316H and Grade 91 manufactured using PM HIP. • Initiate scoping studies of the procured Alloy 316H or Grade 91 manufactured using PM HIP contingent upon successful material procurement.

36 MATERIALS SCIENCE↗

Silicon solar cell efficiency improvement: Status and outlook

Efficiency and operating life is an economic attribute in silicon solar cells application. The efficiency improvements made during the 30 year existence of the silicon solar cells, from about 6% efficiency at the beginning to 19% in the most recent experimental cells is illustrated. In the more stationary periods, the effort was oriented towards improving radiation resistance and yields on the production lines, while, in other periods, the emphasis was on reaching new levels of efficiency through better cell design and improved material processing. First results were forthcoming from the recent efforts. Considerably more efficiency advancement in silicon solar cells is expected, and the anticipated attainment of efficiencies significantly above 20% is discussed. Major advances in material processing and in the resulting material perfection are required.

Wolf, M.↗

Designs for scalable construction of hybrid quantum photonic cavities

Nanophotonic resonators are central to numerous applications, from efficient spin–photon interfaces to laser oscillators and precision sensing. A leading approach consists of photonic crystal (PhC) cavities, which have been realized in a wide range of dielectric materials. However, translating proof-of-concept devices into a functional system entails a number of additional challenges, inspiring new approaches that combine resonators with wavelength-scale confinement and high quality factors; scalable integration with integrated circuits and photonic circuits; electrical or mechanical cavity tuning; and, in many cases, a need for heterogeneous integration with functional materials such as III–V semiconductors or diamond color centers for spin–photon interfaces. Here we introduce a concept that generates a finely tunable PhC cavity at a selected wavelength between two heterogeneous optical materials whose properties satisfy the above requirements. The cavity is formed by stamping a hard-to-process material with simple waveguide geometries on top of an easy-to-process material consisting of dielectric grating mirrors and active tuning capability. We simulate our concept for the particularly challenging design problem of multiplexed quantum repeaters based on arrays of cavity-coupled diamond color centers, achieving theoretically calculated unloaded quality factors of 106, mode volumes as small as 1.2(λ/neff)3, and maintaining >60% total on-chip collection efficiency of fluorescent photons. We further introduce a method of low-power piezoelectric tuning of these hybrid diamond cavities, simulating optical resonance shifts up to ∼760 GHz and color center fluorescence tuning of 5 GHz independent of cavity tuning. These results will motivate integrated photonic cavities toward larger scale systems-compatible designs.

Greenspon, Andrew S. (ORCID:0000000296317568)↗

Recovering Americium and Curium from Mark-42 Target Materials- New Processing Approaches to Enhance Separations and Integrate Waste Stream Disposition - 12228

Oak Ridge National Laboratory (ORNL) is investigating flowsheets to enhance processing efficiencies and to address waste streams associated with recovery of americium (Am) and curium (Cm) from Mark-42 (Mk-42) target materials stored at ORNL. The objective of this work was to identify the most effective flowsheet with which to process the 104 Mk-42 oxide capsules holding a total of 80 g of plutonium (Pu), 190 g of Cm, 480 g of Am, and 5 kg of lanthanide (Ln) oxides for the recovery and purification of the Am/Cm for future use as feedstock for heavy actinide production. Studies were also conducted to solidify the process flowsheet waste streams for disposal. ORNL is investigating flowsheets to enhance processing efficiencies and address waste streams associated with recovery of Am and Cm from Mk-42 target materials stored at ORNL. A series of small-scale runs are being performed to demonstrate an improved process to recover Am/Cm and to optimize the separations of Ln fission products from the Am/Cm constituents. The first of these runs has been completed using one of the Am/Cm/Ln oxide capsules stored at ORNL. The demonstration run showed promising results with a Ln DF of 40 for the Am/Cm product and an Am/Cm DF of 75 for the Ln product. In addition, the total losses of Am, Cm, and Ln to the waste solvents and raffinates were very low at <0.2%, 0.02%, and 0.04%, respectively. However, the Ln-actinide separation was less than desired. For future Reverse TALSPEAK demonstration runs, several parameters will be adjusted (flow rates, the ratio of scrub to strip stages, etc.) to improve the removal of Ln from the actinides. The next step will also include scale-up of the processing flowsheet to use more concentrated solutions (15 g/L Ln versus 5 g/L) and larger volumes and to recycle the HDEHP solvent. This should improve the overall processing efficiency and further reduce losses to waste streams. Studies have been performed with simulated wastes to develop solidification processes for disposal of the secondary waste streams generated by this flowsheet. Formulations were successfully developed for all the waste simulants. Additional tests with actual waste will be the next step in this effort. Future plans are to process all of the remaining 103 capsules in storage at ORNL. A nine-capsule test is now under way to provide additional information to scale-up the process to a target 20-capsule batch size for future processing runs. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Plasma-assisted microwave processing of materials

A microwave plasma assisted method and system for heating and joining materials. The invention uses a microwave induced plasma to controllably preheat workpiece materials that are poorly microwave absorbing. The plasma preheats the workpiece to a temperature that improves the materials' ability to absorb microwave energy. The plasma is extinguished and microwave energy is able to volumetrically heat the workpiece. Localized heating of good microwave absorbing materials is done by shielding certain parts of the workpiece and igniting the plasma in the areas not shielded. Microwave induced plasma is also used to induce self-propagating high temperature synthesis (SHS) process for the joining of materials. Preferably, a microwave induced plasma preheats the material and then microwave energy ignites the center of the material, thereby causing a high temperature spherical wave front from the center outward.

Barmatz, Martin↗

A Mock UF6 Feed and Withdrawal System for Testing Safeguards Monitoring Systems and Strategies Intended for Nuclear Fuel Enrichment and Processing Plants

This report describes an engineering-scale, mock UF6 feed and withdrawal (F&W) system, its operation, and its intended uses. This system has been assembled to provide a test bed for evaluating and demonstrating new methodologies that can be used in remote, unattended, continuous monitoring of nuclear material process operations. These measures are being investigated to provide independent inspectors improved assurance that operations are being conducted within declared parameters, and to increase the overall effectiveness of safeguarding nuclear material. Testing applicable technologies on a mock F&W system, which uses water as a surrogate for UF6, enables thorough and cost-effective investigation of hardware, software, and operational strategies before their direct installation in an industrial nuclear material processing environment. Electronic scales used for continuous load-cell monitoring also are described as part of the basic mock F&W system description. Continuous monitoring components on the mock F&W system are linked to a data aggregation computer by a local network, which also is depicted. Data collection and storage systems are described only briefly in this report. The mock UF{sub 6} F&W system is economical to operate. It uses a simple process involving only a surge tank between feed tanks and product and withdrawal (or waste) tanks. The system uses water as the transfer fluid, thereby avoiding the use of hazardous UF{sub 6}. The system is not tethered to an operating industrial process involving nuclear materials, thereby allowing scenarios (e.g., material diversion) that cannot be conducted otherwise. These features facilitate conducting experiments that yield meaningful results with a minimum of expenditure and quick turnaround time. Technologies demonstrated on the engineering-scale system lead to field trials (described briefly in this report) for determining implementation issues and performance of the monitoring technologies under plant operating conditions. The ultimate use of technologies tested on the engineering-scale test bed is to work with safeguards agencies to install them in operating plants (e.g., enrichment and fuel processing plants), thereby promoting new safeguards measures with minimal impact to operating plants. In addition, this system is useful in identifying features for new plants that can be incorporated as part of 'safeguards by design,' in which load cells and other monitoring technologies are specified to provide outputs for automated monitoring and inspector evaluation.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗