Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “large grids”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Predicting Antarctic Net Snow Accumulation at the Kilometer Scale and Its Impact on Observed Height Changes

Sub-grid-scale processes occurring at or near the surface of an ice sheet have a potentially large impact on local and integrated net accumulation of snow via redistribution and sublimation. Given observational complexity, they are either ignored or parameterized over large-length scales. Here, we train random forest (RF) models to predict variability in net accumulation over the Antarctic Ice Sheet using atmospheric variables and topographic characteristics as predictors at 1 km resolution. Observations of net snow accumulation from both in situ and airborne radar data provide the input observable targets needed to train the RF models. We find that local net accumulation deviates by as much as 172% of the atmospheric model mean. The correlation in space between the predicted net accumulation variability and satellite-derived surface-height change indicates that surface processes operate differently through time, driven largely by the seasonal anomalies in snow accumulation.

Antarctic↗

Solar house system interfaced with the power utility grid

Photovoltaic cells may be used to convert sunlight directly into electrical energy and into low-grade heat to be used for large scale terrestrial solar energy conversion. Both forms of energy can be utilized if such cells are deployed in close proximity to the consumer (rooftop). CdS/Cu2S solar cells are an example of cells which may be produced inexpensively enough to become economically attractive. Cell parameters relevant for combined solar conversion are presented. Critical issues, such as production yield, life expectancy, stability of performance, are discussed. Systems design parameters related to operating temperatures are analyzed. First results obtained on Solar One, the experimental solar house of the University of Delaware, are given. Economic aspects are discussed.

Boeer, K. W.↗

The length scale for sub-grid-scale parameterization with anisotropic resolution

Use of the Smagorinsky eddy-viscosity formulation and related schemes for subgrid-scale parameterization of large eddy simulation models requires specification of a single length scale, earlier related by Lilly to the scale of filtering and/or numerical resolution. An anisotropic integration of the Kolmogoroff enstrophy spectrum allows generalization of that relationship to anisotropic resolution. It is found that the Deardorff assumption is reasonably accurate for small anisotropies and can be simply improved for larger values.

Lilly, Douglas K.↗

Flow Characterization of the NASA Langley Unitary Plan WindTunnel, Test Section 2: Computational Results

Flow in the empty Unitary Planform Wind Tunnel at the NASA Langley Research Center issimulated with computational fluid dynamics methods. The objectives are to assess CFD’s truepredictive capability and to generate flow-field maps upstream of the tunnel’s test section foruse in associated vehicle tests. Multiple CFD solvers, grid adaption methods, and turbulencemodels are used by five teams doing the simulations. The simulation domain is as large aspractical: from the start of the settling chamber, just downstream of the last set of turningvanes, to well downstream of the test section. Simulations are done at three Mach numbers andseveral Reynolds numbers that cover most of the tunnel’s operating range. The sensitivity ofthe CFD solutions to simulation process details, including turbulence model, spatial resolutionand settling-chamber inflow velocity profile, is characterized. Significant sensitivities in somedetails of the predicted test section flow are described. CFD predicts that details of flow inthe settling chamber can affect the flow in the test section. Turning of the flow through thetunnel contraction and past nozzle-block hardware generates streamwise vortices, some ofwhich survive into the core of the test section, principally at low Mach number. Preliminarycomparisons to experimental measurements are given. The major flow characteristics andthe dynamical vortices predicted by CFD exist in the experiment. Several details in CFD andexperiment are observed to differ, including the effects of the vortices and features that appearto be Mach waves in the test section. Sensitivity to grid resolution and turbulence modelingis noted in the vortices; no potential cause for the differences in Mach waves has yet beenidentified in the CFD sensitivity studies.

wind tunnel↗

Load Balancing Sequences of Unstructured Adaptive Grids

Mesh adaption is a powerful tool for efficient unstructured grid computations but causes load imbalance on multiprocessor systems. To address this problem, we have developed PLUM, an automatic portable framework for performing adaptive large-scale numerical computations in a message-passing environment. This paper makes several important additions to our previous work. First, a new remapping cost model is presented and empirically validated on an SP2. Next, our load balancing strategy is applied to sequences of dynamically adapted unstructured grids. Results indicate that our framework is effective on many processors for both steady and unsteady problems with several levels of adaption. Additionally, we demonstrate that a coarse starting mesh produces high quality load balancing, at a fraction of the cost required for a fine initial mesh. Finally, we show that the data remapping overhead can be significantly reduced by applying our heuristic processor reassignment algorithm.

Biswas, Rupak↗

Interplanetary scintillation at large elongation angles - Response to solar wind density structure

Synoptic interplanetary scintillation (IPS) index measurements at 34.3 MHz were obtained during May-December 1974 by means of the University of Iowa Cocoa Cross radiotelescope on a 'grid' of 150 selected radio sources covering solar elongation angles up to 180 deg. Over 80 of these sources displayed definite IPS, and the solar elongation dependence of the 34.3-MHz IPS index is consistent with the elongation of angle dependence measured at higher frequencies. Large enhancements of the IPS index are found to coincide with solar wind (proton) density increases greater than 10/cu cm. Correlation analysis confirms the IPS response to solar wind density and indicates that the events are due primarily to the corotating solar wind turbulent plasma structures which dominated the interplanetary medium during 1974.

Erskine, F. T.↗

Large-Scale Parallel Unstructured Mesh Computations for 3D High-Lift Analysis

A complete "geometry to drag-polar" analysis capability for three-dimensional high-lift configurations is described. The approach is based on the use of unstructured meshes in order to enable rapid turnaround for complicated geometries which arise in high-lift configurations. Special attention is devoted to creating a capability for enabling analyses on highly resolved grids. Unstructured meshes of several million vertices are initially generated on a work-station, and subsequently refined on a supercomputer. The flow is solved on these refined meshes on large parallel computers using an unstructured agglomeration multigrid algorithm. Good prediction of lift and drag throughout the range of incidences is demonstrated on a transport take-off configuration using up to 24.7 million grid points. The feasibility of using this approach in a production environment on existing parallel machines is demonstrated, as well as the scalability of the solver on machines using up to 1450 processors.

Mavriplis, D. J.↗

Use of TRMM Data to Test an Improved Parameterization of Stratiform Precipitation

We successfully implemented our EAUcup parameterization of convection in our most recent geodesic-grid version of the Colorado State University General Circulation Model (CSU GCM). Tendencies due to convection and large-scale cloud microphysics are computed using the same time-step, allowing smoother interactions between convective and large-scale moist processes. Figures illustrate our most recent progress on the simulation of convective and stratiform precipitations for January. Comparisons against TRMM precipitation radar (PR) data would reveal a systematic overestimation of the simulated monthly-mean convective rainfall over well-known areas of deep convection. One major deficiency in the global distribution of stratiform precipitation simulated in the CSU GCM is the lack of stratiform precipitation over land in the tropics. This result strongly disagree with Fowler and Randall who show that convective and stratiform precipitations always coexist and that their ratio to the total precipitation is about 0.5. We believe that stratiform precipitation over land evaporates before reaching the ground because the lower troposphere remains too dry in response to the lack of convective detrainment occurring immediately above the Planetary Boundary Layer (PBL). This issue is further investigated at present. We made significant progress in the development of our parameterization of fractional cloudiness. As an example of our ongoing research effort, a figure shows the global distribution of the cloud ice mixing ratio and corresponding fractional area of ice clouds at 250 hPa. These results were obtained using our latitude-longitude grid version of the CSU GCM. There is a nice correspondence between areas of high (low) values of the cloud ice mixing ratio and the cloud fraction. A nice correspondence between the global distribution of the cloud water mixing ratio and fraction of water clouds in the lower troposphere can also be found. We are pursuing this effort, but in the geodesic version of the GCM. We hope to be able to make comparison of the simulated precipitation against TRMM precipitation data in the near future.

Randall, David A.↗

Three-Dimensional Application of DAMAS Methodology for Aeroacoustic Noise Source Definition

At the 2004 AIAA/CEAS Aeroacoustic Conference, a breakthrough in acoustic microphone array technology was reported by the authors. A Deconvolution Approach for the Mapping of Acoustic Sources (DAMAS) was developed which decouples the array design and processing influence from the noise being measured, using a simple and robust algorithm. For several prior airframe noise studies, it was shown to permit an unambiguous and accurate determination of acoustic source position and strength. As a follow-on effort, this paper examines the technique for three-dimensional (3D) applications. First, the beamforming ability for arrays, of different size and design, to focus longitudinally and laterally is examined for a range of source positions and frequency. Advantage is found for larger array designs with higher density microphone distributions towards the center. After defining a 3D grid generalized with respect to the array s beamforming characteristics, DAMAS is employed in simulated and experimental noise test cases. It is found that spatial resolution is much less sharp in the longitudinal direction in front of the array compared to side-to-side lateral resolution. 3D DAMAS becomes useful for sufficiently large arrays at sufficiently high frequency. But, such can be a challenge to computational capabilities, with regard to the required expanse and number of grid points. Also, larger arrays can strain basic physical modeling assumptions that DAMAS and all traditional array methodologies use. An important experimental result is that turbulent shear layers can negatively impact attainable beamforming resolution. Still, the usefulness of 3D DAMAS is demonstrated by the measurement of landing gear noise source distributions in a difficult hard-wall wind tunnel environment.

Brooks, Thomas F.↗

Large-scale Parallel Unstructured Mesh Computations for 3D High-lift Analysis

A complete "geometry to drag-polar" analysis capability for the three-dimensional high-lift configurations is described. The approach is based on the use of unstructured meshes in order to enable rapid turnaround for complicated geometries that arise in high-lift configurations. Special attention is devoted to creating a capability for enabling analyses on highly resolved grids. Unstructured meshes of several million vertices are initially generated on a work-station, and subsequently refined on a supercomputer. The flow is solved on these refined meshes on large parallel computers using an unstructured agglomeration multigrid algorithm. Good prediction of lift and drag throughout the range of incidences is demonstrated on a transport take-off configuration using up to 24.7 million grid points. The feasibility of using this approach in a production environment on existing parallel machines is demonstrated, as well as the scalability of the solver on machines using up to 1450 processors.

Mavriplis, Dimitri J.↗

Large-Scale Parallel Unstructured Mesh Computations for 3D High-Lift Analysis

A complete "geometry to drag-polar" analysis capability for three-dimensional high-lift configurations is described. The approach is based on the use of unstructured meshes in order to enable rapid turnaround for complicated geometries which arise in high-lift con gurations. Special attention is devoted to creating a capability for enabling analyses on highly resolved grids. Unstructured meshes of several million vertices are initially generated on a work-station, and subsequently refined on a supercomputer. The flow is solved on these refined meshes on large parallel computers using an unstructured agglomeration multigrid algorithm. Good prediction of lift and drag throughout the range of incidences is demonstrated on a transport take-off configuration using up to 24.7 million grid points. The feasibility of using this approach in a production environment on existing parallel machines is demonstrated, as well as the scalability of the solver on machines using up to 1450 processors.

Mavriplis, D. J.↗

Multi-Grid-Cell Validation of Satellite Aerosol Property Retrievals in INTEX/ITCT/ICARTT 2004

Aerosol transport off the US Northeast coast during the Summer 2004 International Consortium for Atmospheric Research on Transport and Transformation (ICARTT) Intercontinental Chemical Transport Experiment (INTEX) and Intercontinental Transport and Chemical Transformation (ITCT) experiments produced a wide range of aerosol types and aerosol optical depth (AOD) values, often with strong horizontal AOD gradients. In these conditions we flew the 14-channel NASA Ames Airborne Tracking Sun photometer (AATS) on a Jetstream 31 (J31) aircraft. Legs flown at low altitude (usually less than 100 m ASL) provided comparisons of AATS AOD spectra to retrievals for 90 grid cells of the satellite radiometers MODIS-Terra, MODIS-Aqua, and MISR, all over the ocean. Characterization of the retrieval environment was aided by using vertical profiles by the J31 (showing aerosol vertical structure) and, on occasion, shipboard measurements of light scattering and absorption. AATS provides AOD at 13 wavelengths lambda from 354 to 2138 nm, spanning the range of aerosol retrieval wavelengths for MODIS over ocean (466-2119 nm) and MISR (446-866 nm). Midvisible AOD on low-altitude J31 legs in satellite grid cells ranged from 0.05 to 0.9, with horizontal gradients often in the range 0.05 to 0.13 per 10 km. When possible, we used ship measurements of humidified aerosol scattering and absorption to estimate AOD below the J31. In these cases, which had J31 altitudes 60-110 m ASL (typical of J31 low-altitude transects), estimated midvisible AOD below the J31 ranged from 0.003 to 0.013, with mean 0.009 and standard deviation 0.003. These values averaged 6 percent of AOD above the 53 1. MISR-AATS comparisons on 29 July 2004 in 8 grid cells (each -17.6 km x 17.6 km) show that MISR versions 15 and 16 captured the AATS-measured AOD gradient (correlation coefficient R2 = 0.87 to 0.92), but the MISR gradient was somewhat weaker than the AATS gradient. The large AOD (midvisible values up to -0.9) and differing gradients in this case produced root-mean-square (RMS) MISR-AATS AOD differences of 0.03 to 0.21 (9 to 31%). MISR V15 Angstrom exponent alpha (= -dlnAOD/dln lambda) was closer to AATS than was MISR V16. MODIS-AATS AOD comparisons on 8 overpasses using 61 grid cells (each nominally 10 km x 10 km) had R2 approximately 0.97, with RMS AOD difference approximately 0.03 (approximately 20%). About 87% of the MODIS AOD retrievals differed from AATS values by less than the predicted MODIS over-ocean uncertainty, Delta tau = plus/minus 0.03 plus/minus 0.05 tau. In contrast to the small MODIS-AATS differences in AOD, MODIS-AATS differences in Angstrom exponent alpha were large: RMS differences for alpha (553, 855 nm) were 0.28 for MODIS-Terra and 0.64 for MODIS-Aqua; RMS differences for alpha (855, 2119 nm) were larger still, 0.61 for MODIS-Terra and 1.14 for MODIS-Aqua. The largest MODIS-AATS Angstrom exponent differences were associated with small AOD values, for which MODIS AOD relative uncertainty is large. Excluding cases with AOD(855 nm) less than 0.1 reduced MODIS-AATS alpha differences substantially. In one grid cell on 21 July 2004, smoke over cloud appeared to impair the MODIS-Aqua cloud mask, resulting in retrieved AODs that significantly exceeded AATS values. Experiments with extending MODIS retrievals into the glint mask yielded MODIS AODs consistently less than AATS AODs, especially at long wavelength, indicating that the current MODIS glint mask limits should not be reduced to the extent tried here. The sign of the AOD differences within the glint mask (MODIS AOD less than AATS AOD) is consistent with ship-measured wind speeds there.

Russell, P. B.↗

Intercomparison of Aerosol Volume Size Distributions Derived from AERONET Ground-Based Remote Sensing and LARGE in Situ Aircraft Profiles During the 2011–2014 DRAGON and DISCOVER-AQ Experiments

Aerosol volume size distribution (VSD) retrievals from the Aerosol Robotic Network (AERONET) aerosol monitoring network were obtained during multiple DRAGON (Distributed Regional Aerosol Gridded Observational Network) campaigns conducted in Maryland, California, Texas and Colorado from 2011 to 2014. These VSD retrievals from the field campaigns were used to make comparisons with near-simultaneous in situ samples from aircraft profiles carried out by the NASA Langley Aerosol Group Experiment (LARGE) team as part of four campaigns comprising the DISCOVER-AQ (Deriving Information on Surface conditions from Column and Vertically Resolved Observations Relevant to Air Quality) experiments. For coincident (1 h) measurements there were a total of 91 profile-averaged fine-mode size distributions acquired with the LARGE ultra-high sensitivity aerosol spectrometer (UHSAS) instrument matched to 153 AERONET size distributions retrieved from almucantars at 22 different ground sites. These volume size distributions were characterized by two fine-mode parameters, the radius of peak concentration (rpeak_conc) and the VSD fine-mode width (widthpeak_conc). The AERONET retrievals of these VSD fine-mode parameters, derived from ground-based almucantar sun photometer data, represent ambient humidity values while the LARGE aircraft spiral profile retrievals provide dried aerosol (relative humidity; RH< 20 %) values. For the combined multiple campaign dataset, the average difference in rpeak_conc was 0:0330:035 μm (ambient AERONET values were 15.8% larger than dried LARGE values), and the average difference in widthpeak_conc was 0:0420:039 μm (AERONET values were 25.7% larger). For a subset of aircraft data, the LARGE data were adjusted to account for ambient humidification. For these cases, the AERONET–LARGE average differences were smaller, with rpeak_conc differing by 0:0110:019 μm (AERONET values were 5.2% larger) and widthpeak_conc average differences equal to 0:0300:037 μm (AERONET values were 15.8% larger).

Schafer, Joel S.↗

LANDSAT application of remote sensing to shoreline-form analysis

The author has identified the following significant results. Using Assateague Island, Cape Hatteras, and Cape Lookout, significantly high correlations were found for most of the six barrier island sections that were examined. Relationships were not consistent from island to island. It was concluded that coastal vulnerability to storm damage can not be assessed based on coastal orientation alone. When orientation data were combined with erosion data for individual barrier islands, the relationship could be used as a basis for barrier island classification. A method was developed to obtain large amounts of historical data on surface coastal process from aerial photography, which was called the orthogonal grid address system. Data on shoreline change and overwash penetration gathered on over 400 km of the mid-Atlantic coast, are being used by various federal and state agencies for planning purposes.

Dolan, R.↗

The characteristics of evolving mesoscale systems over mountainous terrain as revealed by radar and PAM

The paper deals with measurements made within the South Park area (which is located near Denver, Colorado, and is a natural genesis area for cumulus clouds) in July and August 1977, using powered aircraft, sailplanes, rawinsondes, boundary layer profilers, acoustic sounders, micrometeorological towers, lidar, research radar, triple-Doppler radar, and a square grid of surface meteorological stations. Extensive analysis revealed a very complex picture of thunderstorm-scale, large-mesoscale, and synoptic-scale interactions.

George, R. L.↗

Improving the convergence rate to steady state of parabolic ADI methods

The present, residuals' L(2)-norms analysis of the rate of convergence to steady state for parabolic ADI solvers allows the prediction of the number of iterations required for convergence, as a function of the Courant number alpha. A modification of current ADI codes is presented which significantly improves the convergence rate and is insensitive to the Courant number over a large range of alpha. This corrected algorithm is tested for the cases of Dirichlet problems for uniform grids of many mesh sizes, mixed Dirichlet-Neumann problems, and problems defined on stretched grids and/or problems with variable coefficients.

Abarbanel, Saul S.↗

Nonequilibrium thermo-chemical calculations using a diagonal implicit scheme

A recently developed computer program for hypersonic vehicle flow analysis is described. The program uses a diagonal implicit algorithm to solve the equations of viscous flow for a gas in thermochemical nonequilibrium. The diagonal scheme eliminates the expense of inverting large block matrices that arise when species conservation equations are introduced. The program uses multiple zones of grids patched together and includes radiation wall and rarefied gas boundary conditions. Solutions are presented for hypersonic flows of air and hydrogen air mixtures.

Imlay, Scott T.↗

HANA - A three-dimensional Navier-Stokes code for chemically reacting flows

A recently developed computer program for analyzing chemically reacting flows is described. The program uses a diagonal implicit algorithm to solve the equations of viscous flow for a gas in thermochemical nonequilibrium. The diagonal scheme eliminates the expense of inverting large block matrices that arise when species conservation equations are introduced. The program uses multiple zones of grids patched together and includes a k-epsilon turbulence model. Solutions are presented for hypersonic flows of air, hypersonic flows of Martian atmospheric gases, combusting flows of hydrogen/air mixtures, and combusting flows of methane/air mixtures.

Imlay, Scott T.↗