Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “initiative”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Intermountain West Energy Sustainability & Transitions Initiative: CO2 Transport and Geologic Storage Modeling Results

These resources provide the full set of cost modeling results and methods as part of the I-WEST Roadmap Initiative that were used to compile figures as part of the "Pathways to CO2 Utilization and Storage for the Intermountain West Region" chapter. The data were generated from a series of National Energy Technology Laboratory (NETL) cost models and relate to carbon dioxide (CO2) transport costs, CO2 enhanced oil recovery (CO2-EOR) economics, and saline storage economics. These models were used to analyze various business cases given changes in technical and financial assumptions for the I-WEST region as a means to explore how these assumptions influence CO2 transport and storage costs, as well as to evaluate the effect of changing oil prices on the viability of CO2-EOR and the mass of CO2 stored via CO2-EOR. The accompanying report titled "Intermountain West Energy Sustainability & Transitions Initiative: CO2 Transport and Geologic Storage Modeling Results" provides a detailed overview on the models, assumptions, and parameters used in the modeling, as well as example results..

CO2 EOR costs,CO2 Storage Costs,CO2 transportation↗
DOE OSTI2022

INITIAL STUDIES OF CAVITY FAULT PREDICTION AT JEFFERSON LABORATORY

The Continuous Electron Beam Accelerator Facility (CEBAF) at Jefferson Laboratory is a CW recirculating linac that utilizes over 400 superconducting radio-frequency (SRF) cavities to accelerate electrons up to 12 GeV through 5-passes. Recent work has shown that, given RF signals from a cavity during a fault as input, machine learning approaches can accurately classify the fault type. In this paper we report on initial results of predicting a fault onset using only data prior to the failure event. A data set was constructed using time-series data immediately before a fault (’unstable’) and 1.5 seconds prior to a fault (’stable’) gathered from over 5,000 saved fault events. The data was used to train a binary classifier. The results gave key insights into the behavior of several fault types and provided motivation to investigate whether data prior to a failure event could also predict the type of fault. We discuss our method using a sliding window approach and report on initial results. Recent modifications to the low-level RF control system will provide access to streaming signals and we outline a path forward for leveraging deep learning on streaming data

Vidyaratne, Lasitha↗
DOE OSTI2020

Workshop Report: Brightest Light Initiative (March 27-29 2019, OSA Headquarters, Washington, D.C.)

This Brightest Light Initiative (BLI) Workshop Report captures the important research ideas and recommendations for enabling that work developed by over 100 leading scientists at a community-initiated workshop held March 27-29, 2019 in Washington, DC. Workshop attendees developed an understanding of key opportunities, as well as gaps in current technologies and capabilities, for science enabled by the highest-intensity lasers.

43 PARTICLE ACCELERATORS↗
DOE OSTI2020

Fissionable Materials Handlers Operators-Initial Training

These courses were designed for all Initial Fissionable Material Handlers Operators and Supervisors whose job activities will require the performance of Fissile Material Operations located within the Plutonium Facility (PF-4). The course requirements are based on DOE order 426.2, Personnel Section, Qualification, and Training Requirements for Fissionable Material Handlers. These courses are required training for all initial Fissionable Material Handlers and is specific to TA-55 FMH Certification. It covers the core areas and topics in Criticality Safety, Material-at-Risk, Nuclear Material Control and Accountability, Radiological Protection, TA-55 Material Handling and Movement.

61 RADIATION PROTECTION AND DOSIMETRY↗
DOE OSTI2020

Initial Exploration of the Use of Mixed Precision in Iterative Solvers (B639388 Subcontract Quarter I Report)

The first quarter of the project was primarily spent identifying potential projects at the intersection of finite precision analysis, mixed precision computation, and Krylov subspace methods. We summarize our findings in the remainder of the document. Other activities include attending biweekly xSDK meetings as well as contributing material to the technical report and journal versions of the multiprecision landscape paper. The subsequent quarter will be spent selecting a subset of the described projects to focus on, performing initial numerical experiments to evaluate the potential for the use of mixed precision, and developing initial theoretical analysis.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Tribal Colleges and Universities/Advanced Manufacturing Network Initiative (Q3 FY2020 Progress Report)

The National Nuclear Security Agency (NNSA) initiated the Minority Serving Institution Partnership Plan (MSIPP) to 1) align investments in a university capacity and workforce development with the NNSA mission to develop the needed skills and talent for NNSA's enduring technical workforce at the laboratories and production plants, and 2) to enhance research and education at under-represented colleges and universities. Out of this effort, MSIPP launched a new consortium in early FY17 focused on Tribal Colleges and Universities (TCUs) known as the Advanced Manufacturing Network Initiative (AMNI). This consortium has been extended for FY20 and FY21. The following report summarizes the status update during this quarter.

42 ENGINEERING↗
DOE OSTI2020

Development of a Safe, Reliable, and Versatile Explosive Demolition Initiation System

Demolition contractors have a need to simultaneously detonate many demolition charges safely, cheaply, and reliably. An explosive distribution company has contracted the Initiation Systems Group at Lawrence Livermore Laboratory as consultants. The task is to develop a new, safer initiation system to detonate anywhere from 1 to 2000 demolition charges. The primary user of the system will be the explosive demolition contractors.

42 ENGINEERING↗
DOE OSTI2020

Integrated Initiative for Plutonium and Actinide Missions

Recognizing the dynamic environment and challenges facing the plutonium and actinide missions at Los Alamos National Laboratory over the next decade, Laboratory leadership established Fiscal Year (FY) 2020 Laboratory Agenda Item 2.6. This agenda item calls for the development and implementation of an integrated initiative for plutonium and actinide missions at Los Alamos. Over the next decade, Los Alamos has been asked to significantly ramp up pit production to help address nuclear stockpile and nuclear deterrence needs, heat source production to support expansion in space exploration, evaluation of stockpile returns, processing operations in support of nonproliferation, and the actinide science to support all of these efforts. All of this must be accomplished while significantly increasing the size of our plutonium and actinide missions workforce and modernizing and updating critical infrastructure. Only through enhanced integration of science, technology, and engineering (ST&E), manufacturing, and mission operations will we enable achievement of these critical missions. An overall summary of the plutonium and actinide missions is included in Figure 1 on Page 3 and Figure 2 on Page 4 summarizes our goals, objectives, FY 2021 recommended actions and internal strategic priorities that are key elements of our integrated initiative.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2020

Tribal Colleges and Universities/Advanced Manufacturing Network Initiative (Q4 FY2020 Progress Report)

The National Nuclear Security Agency (NNSA) initiated the Minority Serving Institution Partnership Plan (MSIPP) to 1) align investments in a university capacity and workforce development with the NNSA mission to develop the needed skills and talent for NNSA’s enduring technical workforce at the laboratories and production plants, and 2) to enhance research and education at under-represented colleges and universities. Out of this effort, MSIPP launched a new consortium in early FY17 focused on Tribal Colleges and Universities (TCUs) known as the Advanced Manufacturing Network Initiative (AMNI). This consortium has been extended for FY20 and FY21. The following report summarizes the status update during this quarter.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗
DOE OSTI2020

Effects of increasing the initial nitric acid concentration from a maximum of 7.5 to 8.5 M during the dissolution of aluminum spent nuclear fuel

H-Canyon is blending solutions from the dissolution of High Flux Isotope Reactor (HFIR) and Material Test Reactor (MTR) fuels with Target Residue Material (TRM) to prepare feed solution for the 1st Cycle of solvent extraction. The initial acid concentration for HFIR fuel dissolution is limited to 7.5 M by the flowsheet; however, an increase in the initial concentration is desirable to more easily achieve the target acidity for solvent extraction using the current blending strategy. To provide flexibility in batching the highly enriched uranium (HEU) solutions, the Savannah River National Laboratory (SRNL) was requested to evaluate the potential for increasing the maximum HNO3 concentration for HFIR fuel dissolution from 7.5 to 8.5 M. In response to this request, a literature review was performed to evaluate the impact of a higher starting HNO3 concentration on the dissolution of aluminum spent nuclear fuels (ASNF) including both HFIR and MTR fuels.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Initial conditions for simulations of beam physics in linear induction accelerators

Flash radiography of hydrodynamic experiments driven by high explosives is a well-known diagnostic technique in use at many laboratories. At Los Alamos, the DualAxis Radiographic Hydrodynamic Test (DARHT) facility two linear induction electron accelerators (LIAs) make the bremsstrahlung radiographic source spots for point projection radiographs from orthogonal views. A new LIA, called Scorpius, is presently under development to advance this technology. To better understand electron-beam physics in these LIAs, numerical simulations are frequently performed with the objective of improving the radiography. At Los Alamos we frequently use the TRAK ray-trace and LSP particle-in-cell (PIC) codes to simulate the injector, and the XTR and LAMDA envelope/centroid codes along with LSP to simulate transport of the accelerated beam through the LIAs. The LIA simulations need the injected beam parameters as initial conditions for calculating beam transport and stability. The determination of these initial conditions is the topic of this note.

43 PARTICLE ACCELERATORS↗
DOE OSTI2021

Tribal Colleges and Universities/Advanced Manufacturing Network Initiative (Phase II) (Q1 FY2021 Progress Report)

The National Nuclear Security Agency (NNSA) initiated the Minority Serving Institution Partnership Plan (MSIPP) to 1) align investments in a university capacity and workforce development with the NNSA mission to develop the needed skills and talent for NNSA’s enduring technical workforce at the laboratories and production plants, and 2) to enhance research and education at under-represented colleges and universities. Out of this effort, MSIPP launched a new consortium in early FY17 focused on Tribal Colleges and Universities (TCUs) known as the Advanced Manufacturing Network Initiative (AMNI). This consortium has been extended for FY20 and FY21. The following report summarizes the status update during this quarter.

42 ENGINEERING↗
DOE OSTI2021

Tribal Colleges and Universities/Advanced Manufacturing Network Initiative Phase II Sandia Technical Assistance (Q2 FY2021 Progress Report)

The National Nuclear Security Agency (NNSA) initiated the Minority Serving Institution Partnership Plan (MSIPP) to 1) align investments in a university capacity and workforce development with the NNSA mission to develop the needed skills and talent for NNSA’s enduring technical workforce at the laboratories and production plants, and 2) to enhance research and education at under-represented colleges and universities. Out of this effort, MSIPP launched a new consortium in early FY17 focused on Tribal Colleges and Universities (TCUs) known as the Advanced Manufacturing Network Initiative (AMNI). This consortium has been extended for FY20 and FY21. The following report summarizes the status update during this quarter.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2021

Tribal Colleges and Universities/Advanced Manufacturing Network Initiative Phase II Sandia Technical Assistance FY21 Q3 Progress Report

The National Nuclear Security Agency (NNSA) initiated the Minority Serving Institution Partnership Plan (MSIPP) to 1) align investments in a university capacity and workforce development with the NNSA mission to develop the needed skills and talent for NNSA’s enduring technical workforce at the laboratories and production plants, and 2) to enhance research and education at under-represented colleges and universities. Out of this effort, MSIPP launched a new consortium in early FY17 focused on Tribal Colleges and Universities (TCUs) known as the Advanced Manufacturing Network Initiative (AMNI). This consortium has been extended for FY20 and FY21. The following report summarizes the status update during this quarter.

42 ENGINEERING↗
DOE OSTI2021

Initial Measurements with the Prototype Parallel-Slit Ring Collimator Fast Neutron Emission Tomography System

Since 2017, Oak Ridge National Laboratory (ORNL) has been developing a passive fast-neutron emission tomography capability. The goal of this development is the ability to quantify the neutron source strength of individual fuel pins (rods) in spent nuclear fuel assemblies. Such a system could be used to measure the burnup of each fuel pin in a spent fuel assembly to take burnup credit when loading dry storage casks or to count individual fuel pins in spent fuel assemblies for safeguards purposes. At present, a laboratory prototype imager has been built and initial imaging measurements performed. The purpose of this prototype is to demonstrate imaging capability sufficient to resolve individual fuel pins in spent fuel assemblies, and in initial measurements, neutron sources separated by a spacing of 1.27 cm (similar to the spacing between fuel pins in commercial pressurized water reactor 17×17 nuclear fuel assemblies) have been resolved. This report documents the as-built imager, first measurements performed with it, and tomographic reconstructions performed using the measured data.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Tribal Colleges and Universities/Advanced Manufacturing Network Initiative: Phase II Sandia Technical Assistance (FY21 Q4 Progress Report)

The National Nuclear Security Agency (NNSA) initiated the Minority Serving Institution Partnership Plan (MSIPP) 1) to align investments in a university capacity and workforce development with the NNSA mission to develop the needed skills and talent for NNSA’s enduring technical workforce at the laboratories and production plants, and 2) to enhance research and education at under-represented colleges and universities. Out of this effort, MSIPP launched a new consortium in early FY17 focused on Tribal Colleges and Universities (TCUs) known as the Advanced Manufacturing Network Initiative (AMNI). This consortium has been extended for FY20 and FY21. The following report summarizes the status update during this quarter.

42 ENGINEERING↗
DOE OSTI2020

Initial Temperature Testing of Advanced Manufactured Melt Wire Package

As a part of the In-Pile Instrumentation Program, The Idaho National Laboratory (INL) has recently established in-house capabilities to fabricate and test new advanced manufactured sensors for measuring the peak irradiation temperature inside a nuclear test reactor. Although nuclear test reactors can use standard methods of real-time temperature monitoring, such as thermocouples, the complexity of feedthroughs and attachment complications to collect real-time measurements greatly increases the cost of the experiment. Passive monitoring techniques may be utilized that exploit the melting point of well characterized material (standard melt wires), however, the limited space available for instrumentation during experiments is also a challenge. To accommodate the challenge, INL has expanded its temperature detection instrumentation capabilities paired with the advancement of in-house advanced manufacturing options to include printed melt wires for peak irradiation temperature measurement. The advanced manufactured melt wire package can determine peak temperatures in experiments that can fit the challenging space available during irradiation. Recent results and knowledge from this ongoing work have made it possible to develop unique temperature sensors that can accomplish user specific temperature ranges inside the harsh environments experienced during radiation testing. This report summarizes the initial temperature testing using fabricated melt wires with two different melting temperatures, silver (melting temperature of ~960 °C) and solder (melting temperature of ~160 °C), that were initially tested for their relative melting points using non-standard method of furnace and hot plate testing under normal air conditions. Future work will include more controlled way of testing printed melt wires under inert gas with multiple temperature measurements followed by comparison of standard melt wire package performance for baseline characterization.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2021

Initial Benchmarks of UV LEDs and Comparisons with White LEDs

The primary goal of this report is to benchmark the initial level of performance of a selection of commercial UV LEDs across all three bands (i.e., UV-A, UV-B, UV-C). To provide the initial performance benchmarks, a test matrix containing 13 different UV LED products was created in association with the LED Systems Reliability Consortium (LSRC). The products in this test matrix were all commercially available as of June 2021, and at least 22 samples of each product were tested. In addition, two common, commercial white LEDs were tested to provide a benchmark against blue-pumped white LEDs. Testing of the samples included electrical performance testing (e.g., current-voltage measurements) and photometric testing in a calibrated integrating sphere capable of measuring devices in the UV-A, UV-B, and UV-C bands. The electrical testing provided insights into the performance of the semiconductor layers in the LEDs, allowing parameters such as the threshold voltage (V th ) and serial resistance (R serial ) of each sample to be determined. The photometric testing provided insights into emission wavelengths, peak shapes, and radiant efficiencies for each sample. Combined, the information from these tests permits the overall device efficiencies to be compared and provides insights into the electrical and optical performance of the technology.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗