Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “geologic characterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Evaluation of coal-associated sediments, wastes, and AMD sludge in the Southern Appalachian Basin as feedstock materials for REE and Li recovery

Critical minerals (CM) such as rare earth elements (REE+) and Lithium (Li) are essential to technological innovation, energy transitions, global economic and defense security, necessitating the search for unconventional resources and efficient recovery methods to avert supply chain disruptions. Here, this study evaluates coal-associated sediments (underclay and roof rock) and wastes from the Pennsylvanian Pottsville Formation of the Southern Appalachian Basin (SAB) as potential feedstocks for CM recovery. A total of 34 samples (15 underclays, 12 roof rocks, 5 Acid Mine Drainage (AMD) sludges, and 2 coal mining wastes) were characterized using XRD, XRF, ICP-MS, and μ-XRF analytical methods. The REE+ and Li concentrations of these materials ranged from 46.8 to 334.4 ppm and from 11.1 to 519 ppm, respectively, with one underclay sample (Hendrix 3456) yielding the highest values for both. Bulk mineralogy for all samples was dominated by aluminosilicate clay phases, particularly illite and kaolinite. All samples exhibited REY def, rel% values >26% and C outl indices that ranged from 0.69 to 0.94, classifying their REE ore potential as Category II (Promising) as defined by Seredin and Dai (2012). Extractability tests (EPA method 3051 A) yielded low REE+ and Li recoveries, with maximum values of 3.3% and 3.6%, respectively, suggesting associations with resistant minerals like clay and phosphates. Elemental mapping indicates that REE+ is associated with phosphate, whereas statistical analysis suggests that REE+ are associated with aluminosilicates, suggesting heterogeneous associations or minimal phosphate contribution. Li also correlated positively with Al 2 O 3 , indicating an aluminosilicate host. This study highlights the potential of coal-associated sediments in the SAB.

Clay minerals↗
DOE OSTI2025

Thermal Characterization and Exhumation of Northwest San Juan Basin Area, NM

The San Juan Basin (SJB), located in southwestern Colorado northwestern New Mexico, containing Paleozoic through middle Cenozoic strata, formed as a partitioned basin approximately 80 Ma in response to the Laramide orogeny. The SJB is a commercially mature, petroleum-producing basin, and currently being explored for CCUS and geothermal resources. Modern heat flow within the SJB is spatially variable with higher geothermal gradients in its northern and eastern portions. The temporal history of the basin thermal history is essential for understanding capacity for carbon storage and geothermal exploration. We present thermochronometric analyses of two surface and two subsurface samples to constrain spatial-temporal thermal evolution of the northwestern San Juan Basin. Apatite (U-Th)/He thermochronometric analyses were conducted on Cliff House and Kirtland Formation outcrops and subsurface samples of the Ojo Alamo and Pictured Cliffs Formations from a DOE funded, CCUS project pilot-well. In addition, vitrinite reflectance data and 1D basin modelling constrain possible time-temperature pathways of the samples in an area where no previous studies have constrained the uplift/exhumation of the Hogback Monocline using thermochronometry. Modeling suggests that elevated subsurface temperatures developed simultaneously with regional late Oligiocene volcanism in the San Juan Volcanic field and timing of maximum burial in the SJB. Late Miocene to Pliocene cooling/exhumation through the apatite (U-Th)/He partial retention zone support stratigraphic evidence of the Colorado Plateau uplift, possibly regional epeirogenic uplift driven by mantle processes.

02 PETROLEUM↗
DOE OSTI2024

Empirical Dynamic Modeling Reveals Complexity of Methane Fluxes in a Temperate Salt Marsh

Abstract Methane dynamics within salt marshes are complex because vegetation types, temperature, oscillating water levels, and changes in salinity and redox conditions influence CH 4 production, consumption, oxidation, and emissions. These non‐linear and complex interactions among variables affect the traditionally expected functional relationships and present challenges for interpreting and developing process‐based models. We employed empirical dynamic modeling (EDM) and convergent cross mapping (CCM) as a novel approach for characterizing seasonal/multiday and diurnal CH 4 dynamics by inferring causal variables, lags, and interconnections among multiple biophysical variables within a temperate salt marsh using 5 years of eddy covariance data. EDM/CCM is a nonparametric approach capable of quantifying the coupling between variables while determining time scales where variable interactions are the most relevant. We found that gross primary productivity, tidal creek dissolved oxygen, and temperature were important for seasonal/multiday dynamics (rho = 0.73–0.80), while water level was most important for diurnal dynamics during both the growing and dormancy phenoperiods (rho = 0.72 and 0.56, respectively). Lags for the top‐ranked variables (i.e., gross primary productivity, dissolved oxygen, temperature, water level) occurred between 1 and 5 weeks at the seasonal scale and 1–24 hr at the diurnal scale. The EDM had high prediction capabilities for intra‐/inter‐seasonal patterns and annual CH 4 sums but had limitations in representing large, infrequent fluxes. Results highlight the importance of non‐linearity, drivers, lag times, and interconnections among multiple biophysical variables that regulate CH 4 fluxes in tidal wetlands. This research introduces a novel approach to examining CH 4 fluxes, which will aid in evaluating current paradigms in wetlands and other ecosystems.

Environmental Sciences & Ecology↗
DOE OSTI2021

The Relationship Between Topography, Bedrock Weathering, and Water Storage Across a Sequence of Ridges and Valleys

Abstract Bedrock weathering regulates nutrient mobilization, water storage, and soil production. Relative to the mobile soil layer, little is known about the relationship between topography and bedrock weathering. Here, we identify a common pattern of weathering and water storage across a sequence of three ridges and valleys in the sedimentary Great Valley Sequence in Northern California that share a tectonic and climate history. Deep drilling, downhole logging, and characterization of chemistry and porosity reveal two weathering fronts. The shallower front is ∼7 m deep at the ridge of all three hillslopes, and marks the extent of pervasive fracturing and oxidation of pyrite and organic carbon. A deeper weathering front marks the extent of open fractures and discoloration. This front is 11 m deep under two ridges of similar ridge‐valley spacing, but 17.5 m deep under a ridge with nearly twice the ridge‐valley spacing. Hence, at ridge tops, the fraction of the hillslope relief that is weathered scales with hillslope length. In all three hillslopes, below this second weathering front, closed fractures and unweathered bedrock extend about one‐half the hilltop elevation above the adjacent channels. Neutron probe surveys reveal that seasonally dynamic moisture is stored to approximately the same depth as the shallow weathering front. Under the channels that bound our study hillslopes, the two weathering fronts coincide and occur within centimeters of the ground surface. Our findings provide evidence for feedbacks between erosion and weathering in mountainous landscapes that result in systematic subsurface structuring and water routing.

58 GEOSCIENCES↗
DOE OSTI2023

HFTS-1 (Final Report)

Despite the long history of hydraulic fracturing, the optimal number of fracturing stages during multi-stage fracture stimulation in horizontal wells can be a complex subject. In addition to the increased expense of multistage fracturing in horizontal wells, increasing the number of fracturing stages does not always correlate with a commensurate increase in production. The problem is the application of a uniform fracture stimulation design to all stages with no consideration for geological variations along the wellbore. The result is an inefficient use and costly waste of energy and water. Optimization of the fracturing process requires an understanding of the cause-and-effect relationship between fracturing parameters and local geological properties at a given location along the wellbore. Realizing that the generalized rock mechanics theories and hypotheses are not truly applicable to fractured and laminated shales, quantifiable impacts of a shale’s geomechanical and depositional features are a prerequisite for design and implementation of optimized hydraulic fractures. The overarching goal of this project is to understand and define the relationships of shale geology and fracture dynamics using detailed field data that includes coring of the fracture domain. Finally, resource recovery from shale formations is estimated to be less than fifteen percent. Research proposed in this project will establish the foundations for investigating enhanced recovery techniques for increased resource recovery in existing fracture treated wells. Natural gas as an EOR fluid is in the initial stages of being used broadly in the oil and gas industry and as such, many aspects of the process need to be researched and addressed prior to widespread acceptance. In addition, re-fracturing techniques, particularly using cemented liners also need to be further investigated. This project explores several of these EOR techniques in greater detail, not just at the theoretical level, but through actual field test sites. This report delves into the research program, identified tasks, several studies, observations, results, and conclusions under the Hydraulic Fracturing Test Site (HFTS) project. This test project is subdivided into three distinct phases and each phase is discussed in detail under separate sections. The original test site for Phase 1 as well as the Phase 2 site are in Midland Basin in Texas and operated by Laredo Petroleum. In the first two phases, the program targeted the Wolfcamp formation in Midland Basin. Phase 3 of the study targeted the EagleFord play in South Texas with Devon Energy as the operator. Significant conclusions from this study include: 1) lateral and vertical fracture growth mapping as well as proppant transport behavior, 2) Use of field gas and its applicability for huff n puff EOR injection in the Midland Basin, 3) Development and validation of proppant log, both at core scale as well as in-fill well implementation by analyzing drilling mud return samples, 4) Applicability of liner refracturing including best practices for enhanced unit level productivity. This report will detail all these studies as well as technical results and conclusions from said studies. These include general subsurface characterization work, completion designs as implemented, studies looking at fracture geometry, high resolution microseismic study, advanced crosswell strain mapping studies including drainage characterization, core characterization results, proppant analysis (core and observation wells), geochemistry, etc. to name a few.

02 PETROLEUM↗
DOE OSTI2023

Discrete Measurements of the Least Horizontal Principal Stress from Core Data: An Application of Viscoelastic Stress Relaxation

Summary The emerging Paradox Oil Play in southeastern Utah is among the most significant unconventional plays in the western USA. The mean total undiscovered oil resources within just the Pennsylvanian Cane Creek interval of the Paradox Basin are believed to exceed 215 million barrels. However, to date, less than 5% (~9 million barrels) of the total Cane Creek resource has been produced from fewer than 40 wells, and only approximately one-half of those are horizontal wells. More than 95% of production is from the central Cane Creek Unit (CCU). Natural fractures are a key feature of many production wells, but stimulation by induced hydraulic fractures is not consistently successful. We hypothesize that more effective production in this play will rely on better fundamental characterization, especially on better quantification of the state of stress. Approximately 110 ft of core, well logs, and a diagnostic fracture injection test (DFIT) were acquired from the State 16-2 well within the CCU. With these data, we applied two methods to constrain and clarify the state of stress. The first technique, the Simpson’s coefficient method, provides lower bounds on the two horizontal principal stresses and relies on only limited data. Alternatively, the viscoelastic stress relaxation (VSR) method is used to estimate the least horizontal principal stress, building on observations that principal stresses become more isotropic as the viscous behavior of a rock is more pronounced. Results of these two methods support the hypothesis that the state of stress in the CCU of the Paradox Basin is nearly lithostatic and isotropic. Other factors consistent with this hypothesis include high formation pore pressure, which tends to reduce the possible stress states by changing the frictional failure equilibrium; lack of induced fractures in the core, which should be present in the case of stress anisotropy; and interbedded halite layers, which given their high degree of ductility, probably lead to greater VSR for the entire sedimentary package.

Energy & Fuels↗
DOE OSTI2024

Estimates of Lake Nitrogen, Phosphorus, and Chlorophyll‐ a Concentrations to Characterize Harmful Algal Bloom Risk Across the United States

Abstract Excess nutrient pollution contributes to the formation of harmful algal blooms (HABs) that compromise fisheries and recreation and that can directly endanger human and animal health via cyanotoxins. Efforts to quantify the occurrence, drivers, and severity of HABs across large areas is difficult due to the resource intensive nature of field monitoring of lake nutrient and chlorophyll‐aconcentrations. To better characterize how nutrients interact with other environmental factors to produce algal blooms in freshwater systems, we used spatially explicit and temporally matched climate, landscape, in‐lake characteristic, and nutrient inventory data sets to predict nutrients and chlorophyll‐aacross the conterminous US (CONUS). Using a nested modeling approach, three random forest (RF) models were trained to explain the spatiotemporal variation in total nitrogen (TN), total phosphorus (TP), and chlorophyll‐aconcentrations across US EPA's National Lakes Assessment (n = 2,062). Concentrations of TN and TP were the most important predictors and, with other variables, the RF model accounted for 68% of variation in chlorophyll‐a. We then used these RF models to extrapolate lake TN and TP predictions to lakes without nutrient observations and predict chlorophyll‐afor ∼112,000 lakes across the CONUS. Risk for high chlorophyll‐aconcentrations is highest in the agriculturally dominated Midwest, but other areas of risk emerge in nutrient pollution hot spots across the country. These catchment and lake‐specific results can help managers identify potential nutrient pollution and chlorophyll‐ahot spots that may fuel blooms, prioritize at‐risk lakes for additional monitoring, and optimize management to protect human health and other environmental end goals.

Environmental Sciences & Ecology↗
DOE OSTI2025

Integrating Contaminant Source Indicators, Water Quality Measures, and Ecotoxicity to Characterize Contaminant Mixtures and Per- and Polyfluoroalkyl Substance (PFAS) Variability in an Urban Watershed

Thousands of chemical contaminants threaten watersheds but are time and cost prohibitive to monitor. Identifying their sources, transport, and ecological risk is limited in heterogeneous urban watersheds. We present an integrative watershed approach using source-specific indicator compounds, common water quality measures, and ecotoxicity assays to examine the distribution of contaminant mixtures in an urbanized watershed. Indicator compound concentrations were temporally and spatially distributed for treated/untreated sewage (sucralose, artificial sweetener), road runoff (diphenyl-guanidine [DPG] and 6PPD-quinone [6PPD-Q], automobile tire additives), and lawncare runoff (aminomethanephosphonic acid (AMPA), major degradant of the herbicide glyphosate). Sucralose was predominately sourced from treated wastewater; measurable concentrations in tributaries indicated raw sewage inputs. DPG and 6PPD-Q concentrations correlated to road density during base flow and were elevated during stormflow. AMPA was measurable spring through fall, especially where lawns were dense. When specific sources dominated flow, water quality measures correlated with wastewater (sulfate, potassium, chloride, and sodium) and road runoff (chromium and lead) indicators. The limited behavioral toxicity observed in exposed zebrafish (Danio rerio) (18%) was not well explained by source-indicators. PFAS concentrations were highly variable spatially but not well explained by our source-specific indicator compounds. Here, more costly compound-specific monitoring may be necessary when multiple sources exist or when unexpected toxicity trends occur.

computer simulations↗
DOE OSTI2021

Hydro-mechanical measurements and x-ray imaging of sheared crystalline rock fractures from EGS Collab experiments 1 & 2

Measuring hydro-mechanical properties of natural fractures is a prerequisite for optimizing hydraulic stimulation design and well placement. We completed experiments to characterize shear on natural fractures in schist, amphibolite, and rhyolite specimens drilled from EGS Collab Project’s field sites at the Sanford Underground Research Facility (SURF) in South Dakota. A triaxial direct shear method and coupled x-ray imaging were used to perform hydroshearing and mechanical shearing at the site’s in-situ stress conditions. This produced simultaneous measurements of fracture and matrix strength, permeability, stress-dependent aperture, dilation, and friction strength. Our results identified that only a subset of the natural fractures was weak enough for hydroshearing. Generally, hydroshearing increases fracture permeability by a factor of 10 or more and the enhancement is retainable over time. However, the shear slip does not always result in permeability enhancement. High content of phyllosilicates was found to associate with exceptionally weak fractures that also exhibited poor or even negative enhancement after stimulation. Combining our measurements with site data, we can predict that most observable fractures at the two EGS Collab sites do not meet the criteria for hydroshearing before tensile opening. In some cases, the visible fractures are low permeability and as strong as the adjacent rock. To induce hydroshearing before tensile opening, injection must target known weak and favorably oriented fractures with confirmed pre-existing permeability.

58 GEOSCIENCES↗
DOE OSTI2020

Using SIMS to decode noisy stratigraphic δ 13 C variations in Ediacaran carbonates

Carbonate carbon isotope (δ 13 C carb ) chemostratigraphy is a valuable tool in Precambrian stratigraphic correlation. The effectiveness of this tool rests on the assumption that δ 13 C carb data record global seawater signals. However, in some cases δ 13 C carb data exhibit rapid and noisy stratigraphic variations that may have been influenced by authigenic or diagenetic carbonate minerals. To assess the contribution of non-primary minerals towards bulk carbonate carbon isotope values, we acquired SIMS (secondary ion mass spectrometry) δ 13 C carb data, electron microscopic data, and CL (cathodoluminescence) microscopic data from two Ediacaran successions—the lower Member II of the Doushantuo Formation in South China and the Mooifontein Member of the Zaris Formation in southern Namibia. The Doushantuo samples came from a stratigraphic interval with noisy meter-scale δ 13 C carb variations of up to 10‰, whereas the Mooifontein Member is characterized by consistent δ13Ccarb values with limited meter-scale variations of less than ~4‰. Our data show that the meter-scale stratigraphic variations in δ 13 C carb are also mirrored in the SIMS data at μm-mm scales in both Doushantuo and Mooifontein samples. In the Doushantuo samples, SIMS δ 13 C carb values of authigenic calcite vary by up to 10‰ over μm-mm scales and can be either higher or lower than those of the co-existing dolomite matrix, which also appears to be affected by authigenic carbonate on the basis of petrographic observation. Bulk-sample δ 13 C carb values measured on powders microdrilled from the same SIMS specimens are within the range of SIMS δ 13 C carb values. Thus, we infer that bulk-sample δ 13 C carb values of Doushantuo samples represent mixtures of different carbonate components. The Doushantuo and Mooifontein SIMS δ 13 C carb data validate the traditional method of using chemostratigraphic consistency to evaluate authigenic/diagenetic alteration, but given that secondary phases may be 13 C-enriched relative to matrix carbonate, caution is warranted when taking maximum values to approximate primary chemostratigraphic trends.

58 GEOSCIENCES↗
DOE OSTI2020

XANES spectroscopy of sulfides stable under reducing conditions

X-ray absorption near-edge structure (XANES) spectroscopy is a powerful technique to quantitatively investigate sulfur speciation in geologically complex materials such as minerals, glasses, soils, organic compounds, industrial slags, and extraterrestrial materials. This technique allows non-destructive investigation of the coordination chemistry and oxidation state of sulfur species ranging from sulfide (2–oxidation state) to sulfate (6+ oxidation state). Each sulfur species has a unique spectral shape with a characteristic K-edge representing the s → p and d hybridization photoelectron transitions. As such, sulfur speciation is used to measure the oxidation state of samples by comparing the overall XANES spectra to that of reference compounds. Although many S XANES spectral standards exist for terrestrial applications under oxidized conditions, new sulfide standards are needed to investigate reduced (oxygen fugacity, f O 2 , below IW) silicate systems relevant for studies of extraterrestrial materials and systems. Sulfides found in certain meteorites (e.g., enstatite chondrites and aubrites) and predicted to exist on Mercury, such as CaS (oldhamite), MgS (niningerite), and FeCr 2 S 4 (daubréelite), are stable at f O 2 below IW-3 but rapidly oxidize to sulfate and/or produce sulfurous gases under terrestrial surface conditions. XANES spectra of these compounds collected to date have been of variable quality, possibly due to the unstable nature of certain sulfides under typical (e.g., oxidizing) laboratory conditions. A new set of compounds was prepared for this study and their XANES spectra are analyzed for comparison with potential extraterrestrial analogs. S K -edge XANES spectra were collected at Argonne National Lab for FeS (troilite), MnS (alabandite), CaS (oldhamite), MgS (niningerite), Ni 1–x S, NiS 2 , CaSO 4 (anhydrite), MgSO 4 , FeSO 4 , Fe 2 (SO 4 ) 3 , FeCr 2 S 4 (daubréelite), Na 2 S, Al 2 S 3 , Ni 7 S 6 , and Ni 3 S 2 ; the latter five were analyzed for the first time using XANES. These standards expand upon the existing S XANES end-member libraries at a higher spectral resolution (0.25 eV steps) near the S K -edge. Processed spectra, those that have been normalized and “flattened,” are compared to quantify uncertainties due to data processing methods. Future investigations that require well-characterized sulfide standards, such as the ones presented here, may have important implications for understanding sulfur speciation in reduced silicate glasses and minerals with applications for the early Earth, Moon, Mercury, and enstatite chondrites.

Anzures, Brendan A.↗
DOE OSTI2023

Dinitrogen Emissions Dominate Nitrogen Gas Emissions From Soils With Low Oxygen Availability in a Moist Tropical Forest

Lowland tropical forest soils are relatively N rich and are the largest global source of N 2 O (a powerful greenhouse gas) to the atmosphere. Despite the importance of tropical N cycling, there have been few direct measurements of N 2 (an inert gas that can serve as an alternate fate for N 2 O) in tropical soils, limiting our ability to characterize N budgets, manage soils to reduce N 2 O production, or predict the future role that N limitation to primary productivity will play in buffering against climate change. We collected soils from across macro‐ and micro‐topographic gradients that have previously been shown to differ in O 2 availability and trace gas emissions. We then incubated these soils under oxic and anoxic headspaces to explore the relative effect of soil location versus transient redox conditions. No matter where the soils came from, or what headspace O 2 was used in the incubation, N 2 emissions dominated the flux of N gas losses. In the macrotopography plots, production of N 2 and N 2 O were higher in low O 2 valleys than on more aerated ridges and slopes. In the microtopography plots, N 2 emissions from plots with lower mean soil O 2 (5%–10%) were greater than in plots with higher mean soil O 2 (10%–20%). We estimate an N gas flux of ∼37 kg N/ha/yr from this forest, 99% as N 2 . These results suggest that N 2 fluxes may have been systematically underestimated in these landscapes, and that the measurements we present call for a reevaluation of the N budgets in lowland tropical forest ecosystems.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Integrated experimental studies of pore structure and fluid uptake in the Bossier Shale in eastern Texas, USA

Within the Haynesville-Bossier Shale complex, the Bossier Shale has not been extensively studied by either industry and academia, despite it being an unconventional gas reservoir and a potential caprock for carbon storage in the underlaying Haynesville Shale. The lack of knowledge of the complex pore structures and fluid-rock interactions hinders the effective extraction of gas and the characterization of fluid reservoirs and sealing capacity. Integrated experimental studies of pore structure and fluid-rock interactions were conducted in seven Bossier Shale core samples collected in eastern Texas. Petrographic, geochemical, and petrophysical properties such as mineral composition, organic richness, thermal maturity, porosity, pore/pore throat diameter distribution, water-accessible pores, liquid water imbibition, and water vapor adsorption were characterized using complementary approaches of thin-section petrography, scanning electron microscopy, X-ray diffraction, total organic matter, pyrolysis, mercury intrusion porosimetry, nuclear magnetic resonance, (Ultra-) small angle X-rays scattering as well as small angle neutron scattering with deuterated liquids and contrast variation. Further, the results show that the thermally mature Bossier Shales are composed of mixed argillaceous mudstone, mixed mudstone, and mixed carbonate mudstone. The shale contains both organic and inorganic pores, with porosities of 3.24-9.37 %, pore-to-throat ratios of 1.65 to 19.4, and water-accessible pores accounting for 28.7-72.6 % of total pores. Approaches of liquid water imbibition and water vapor adsorption, with and without direct contact of water with shale samples, indicate that liquid water first enters the nano-sized pores under high capillary pressures, and water vapor adsorption is mainly controlled by both clay minerals and pores with diameters less than 10 nm. These findings contribute to a better understanding of pore structures and water-shale interactions and their controlling factors in the Bossier Shale.

58 GEOSCIENCES↗
DOE OSTI2025

Clarifying the trophic state concept to advance macroscale freshwater science and management

For over a century, ecologists have used the concept of trophic state (TS) to characterize an aquatic ecosystem's biological productivity. However, multiple TS classification schemes, each relying on a variety of measurable parameters as proxies for productivity, have emerged to meet use‐specific needs. Frequently, chlorophyll a, phosphorus, and Secchi depth are used to classify TS based on autotrophic production, whereas phosphorus, dissolved organic carbon, and true color are used to classify TS based on both autotrophic and heterotrophic production. Both classification approaches aim to characterize an ecosystem's function broadly, but with varying degrees of autotrophic and heterotrophic processes considered in those characterizations. Moreover, differing classification schemes can create inconsistent interpretations of ecosystem integrity. For example, the US Clean Water Act focuses exclusively on algal threats to water quality, framed in terms of eutrophication in response to nutrient loading. This usage lacks information about non‐algal threats to water quality, such as dystrophication in response to dissolved organic carbon loading. Consequently, the TS classification schemes used to identify eutrophication and dystrophication may refer to ecosystems similarly (e.g., oligotrophic and eutrophic), yet these categories are derived from different proxies. These inconsistencies in TS classification schemes may be compounded when interdisciplinary projects employ varied TS frameworks. Even with these shortcomings, TS can still be used to distill information on complex aquatic ecosystem function into a set of generalizable expectations. The usefulness of distilling complex information into a TS index is substantial such that usage inconsistencies should be explicitly addressed and resolved. To emphasize the consequences of diverging TS classification schemes, we present three case studies for which an improved understanding of the TS concept advances freshwater research, management efforts, and interdisciplinary collaboration. To increase clarity in TS, the aquatic sciences could benefit from including information about the proxy variables, ecosystem type, as well as the spatiotemporal domains used to classify TS. As the field of aquatic sciences expands and climatic irregularity increases, we highlight the importance of re‐evaluating fundamental concepts, such as TS, to ensure their compatibility with evolving science.

classification↗
DOE OSTI2024

DEEPEN: Final 3D PFA Favorability Models and 2D Favorability Maps at Newberry Volcano

Part of the DEEPEN (DE-risking Exploration of geothermal Plays in magmatic ENvironments) project involved developing and testing a methodology for a 3D play fairway analysis (PFA) for multiple play types (conventional hydrothermal, superhot EGS, and supercritical). This was tested using new and existing geoscientific exploration datasets at Newberry Volcano. This GDR submission includes images, data, and models related to the 3D favorability and uncertainty models and the 2D favorability and uncertainty maps. The DEEPEN PFA Methodology, detailed in the journal article below, is based on the method proposed by Poux & O'brien (2020), which uses the Leapfrog Geothermal software with the Edge extension to conduct PFA in 3D. This method uses all available data to build a 3D geodata model which can be broken down into smaller blocks and analyzed with advanced geostatistical methods. Each data set is imported into a 3D model in Leapfrog and divided into smaller blocks. Conditional queries can then be used to assign each block an index value which conditionally ranks each block's favorability, from 0-5 with 5 being most favorable, for each model (e.g., lithologic, seismic, magnetic, structural). The values between 0-5 assigned to each block are referred to as index values. The final step of the process is to combine all the index models to create a favorability index. This involves multiplying each index model by a given weight and then summing the resulting values. The DEEPEN PFA Methodology follows this approach, but split up by the specific geologic components of each play type. These components are defined as follows for each magmatic play type: 1. Conventional hydrothermal plays in magmatic environments: Heat, fluid, and permeability 2. Superhot EGS plays: Heat, thermal insulation, and producibility (the ability to create and sustain fractures suitable for and EGS reservoir) 3. Supercritical plays: Heat, supercritical fluid, pressure seal, and producibility (the proper permeability and pressure conditions to allow production of supercritical fluid) More information on these components and their development can be found in Kolker et al., (2022). For the purposes of subsurface imaging, it is easier to detect a permeable fluid-filled reservoir than it is to detect separate fluid and permeability components. Therefore, in this analysis, we combine fluid and permeability for conventional hydrothermal plays, and supercritical fluid and producibility for supercritical plays. We also project the 3D favorability volumes onto 2D surfaces for simplified joint interpretation, and we incorporate an uncertainty component. Uncertainty was modeled using the best approach for the dataset in question, for the datasets where we had enough information to do so. Identifying which subsurface parameters are the least resolved can help qualify current PFA results and focus future efforts in data collection. Where possible, the resulting uncertainty models/indices were weighted using the same weights applied to the respective datasets, and summed, following the PFA methodology above, but for uncertainty.

15 GEOTHERMAL ENERGY↗
DOE OSTI2022

Pore-Scale Microenvironments Control Anthropogenic Carbon Mineralization Outcomes in Basalt

Thin sections and hand samples from 50 sidewall cores from the Wallula Basalt Pilot Demonstration, a basaltic carbon sequestration demonstration, provided the opportunity for the in-depth analysis of carbon mineralization induced by the injection of supercritical CO 2 . In this study, we used optical petrography and scanning electron microscopy to characterize the physical and chemical characteristics of the basalt components influenced by carbon mineralization reactions from all available hand samples and thin sections within the three CO 2 injection zones and caprock flow interiors. We found extensive carbonate mineralization, mostly in the form of nodules that were shown to be chemically zoned: Ca-dominant in the core regions and Ca-bearing Fe-dominant in the outer regions. Carbonate mineralization also took the form of fracture-filling carbonate cement, and acicular aragonite was also observed. Overall, we clarified the structural and paragenetic relationships between newly formed minerals, identifying a new fibro-palagonite-like, poorly crystalline silicate phase that grew on the carbonate nodules and pore-lining zeolites. Here we observed Fe-dominant carbonate precipitates surrounding acicular aragonite and rhombohedral Ca-carbonate cores, whereas previous studies of these zoned nodules did not observe these structures. A comprehensive accounting of the carbon mineralization products is vital to understand and predict the behavior of supercritical CO 2 in the subsurface given both the diversity of the host rock between and within injection zones, especially considering that the morphology and chemistry of the diverse precipitates are influenced by the pore-scale microenvironments of the basalt.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

The Zonal Patterns in Late Quaternary Tropical South American Precipitation

Speleothem oxygen isotope records (δ 18 O) of tropical South American rainfall in the late Quaternary show a zonal “South American Precipitation Dipole” (SAPD). The dipole is characterized by opposing east-west precipitation anomalies compared to the present—wetter in the east and drier in the west at the mid-Holocene (~7 ka), and drier in the east and wetter in the west at the Last Glacial Maximum (~21 ka). However, the SAPD remains enigmatic because it is expressed differently in western versus eastern δ18O records and isotope-enabled climate model simulations usually misrepresent the magnitude and/or spatial pattern of δ 18 O change. Here, we address the SAPD enigma in two parts. First, we re-interpret the δ 18 O data to account for upwind rainout effects that are known to be pervasive in tropical South America, but are not always considered in Quaternary paleoclimate studies. Our revised interpretation reconciles the δ 18 O data with cave infiltration and other proxy records, and indicates that the centroid of tropical South American rainfall has migrated zonally over time. Second, using an energy balance model of tropical atmospheric circulation, we hypothesize that zonal migration of the precipitation centroid can be explained by regional energy budget shifts, such as changing Saharan albedo associated with the African Humid Period, that have not been modeled in previous SAPD studies. This hypothesis of a migrating precipitation centroid presents a new framework for interpreting δ18O records from tropical South America and may help explain the zonal rainfall anomalies that predate the late Quaternary.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

The ATTO-Campina site: A new observatory for tropical convection and gas-aerosol-cloud-precipitation interactions in the Amazon

We present results from ATTO-Campina, a new permanent observational site in central Amazon, about 4 km from the ATTO towers. Operational since 2020, ATTO-Campina characterizes atmospheric, cloud and rainfall properties through remote sensing. The goal is to provide continuous, complementary measurements to the ATTO towers, addressing the rainforest’s complex gas-aerosol-cloud-precipitation dynamics. Using a 3.5-year dataset, we classified convective clouds into three types: shallow cumulus (ShCu), congestus (Con) or (Deep) clouds. The shallow-to-deep transition takes about three hours, starting with ShCu formation at 11:00 local time. The accumulated rainfall peak follows at about 16:00. Only weak downdrafts are present in the upper troposphere where previous studies indicate new particle formation (NPF) occurrence. Strong downdrafts are mostly limited to heights below 5 km. Con and Deep convective days have higher concentrations of ultrafine aerosol and lower concentrations of accumulation-mode particles compared to ShCu. Convective clouds also significantly modify gas mixing ratios. Deep convective clouds are associated with high near-surface O3, consistent with downward transport from the midtroposphere. Our results showcase the added detail achieved by integrating data from the ATTO towers and ATTO-Campina sites. Together, these sites support better understanding of interconnected gas-aerosol-cloud-precipitation processes in the Amazon and their evolution under climate change.

54 ENVIRONMENTAL SCIENCES↗