HFIR Storage Box General Handling Calculations
HFIR (High Flux Isotope Reactor) Storage Box General Handling Calculations
42 ENGINEERING↗
SEARCH · Engineering Papers
Results for “generalization”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Stabilized Hyperfoam Modeling of the General Plastics EF4003 (3 PCF) Flexible Foam
Constitutive model parameterizations for the General Plastics EF4003 low density 3 pound per cubic foot are needed for design and qualification purposes in normal and abnormal mechanical simulations. The material is expected to be deformed in two ways: first during preloading, and second under impact conditions of the system (transient dynamic). All analyses are to be performed at room temperature. The goal is to provide the analysis community a robust constitutive model parameterization to represent the compression behavior of the EF4003 foam from small deformations up to massive compressive deformations when the foam is densifying. It is worth noting the EF4003 exhibits anisotropy in its stress-strain behavior between the rise and transverse directions (See figure 2.8c-d) as well as plateau behavior that is very likely to cause material stability issues, due to the buckling transition, (and has historically done so) when using Sandia’s current workhorse models for flexible foams, Hyperfoam and Flex Foam. A Stability-informed Hyperfoam parameterization procedure is developed and executed to calibrate a hyperfoam model for the EF4003 room temperature, transversely loaded data. A rise orientation parameterization was not attempted due to localization in the experiments.
36 MATERIALS SCIENCE↗
Taylor wave solution for a general equation of state
This document describes a solution procedure for calculating the Taylor wave behind an unsupported Chapman–Jouguet (CJ) detonation in planar, cylindrical, and spherical geometries given a general equation of state. The resulting semi-analytic solution can be utilized to examine new equation of state models for detonation products and during the verification of hydrodynamic codes. The governing partial differential equations are reduced to ordinary differential equations in both characteristic and self-similar forms. The first-order systems corresponding to each geometry are amenable to solution numerically using commonly available methods. A difficulty arises at the CJ point in radial coordinates where the similarity equations become singular. Two separate strategies are proposed to integrate the first-order system. The first one uses an asymptotic approximation near the CJ point that can be used to perturb the boundary conditions. The second one applies a change of variables which removes the singularity at the expense of an additional equation to be integrated. A test problem is provided for the Davis products equation of state to illustrate the qualitative features of the Taylor wave in each geometric configuration and compared with a Lagrangian hydrodynamics research code. A Python code listing gives an implementation using the SciPy library to assists users in generating the results.
97 MATHEMATICS AND COMPUTING↗
General Overview of Mobile Sources Used for Well Logging and Industrial Radiography Applications
Mobile sources is a term most commonly used to describe radioactive sources that are used in applications requiring frequent transportation. Such radioactive sources are in common use world-wide where typical applications include radiographic non-destructive evaluation (NDE) and oil and gas well logging, among others requiring lesser amounts of radioactivity. This report provides a general overview of mobile sources used for well logging and industrial radiography applications including radionuclides used, equipment, and alternative technologies. Information presented here has been extracted from a larger study on common mobile radiation sources and their use.
47 OTHER INSTRUMENTATION↗
CrossLink: General Overview [Slides]
Problem: Traditional mesh generation approaches are labor intensive and have limited robustness when applied to parametric design exploration and optimization of complex geometries. While automatic mesh generation approaches exist, they tend to generate tetrahedral or mixed-hybrid meshes which are generally unsuitable for physics applications with strong shock waves, thin boundary layers, and strong gradients. In addition, simulations sizes in the billions of cells are becoming more common with traditional mesh generation methods quickly reaching scalability limits. Solution: CrossLink offers a topology-based mesh generation approach with unstructured block-filling methods and a scalable mesh generation engine. In addition, CrossLink incorporates a python-based API for seamless workflow integration and robust repeatability of the geometry handling and mesh generation process. This makes it ideal for parametric design study and optimization of complex geometries. Finally, future versions of CrossLink will offer a parametric mesh capability that optimizes a high-order mesh and enables reconstruction of the final mesh in memory by the physics solver.
97 MATHEMATICS AND COMPUTING↗
Beyond Generalized Eigenvalues
Two analysis techniques, the generalized eigenvalue method (GEM) or Prony's method (PM), are commonly used to analyze statistical estimates of correlation functions produced in lattice quantum field theory calculations. GEM takes full advantage of the matrix structure of correlation functions but only considers individual pairs of time separations when much more data exists. PM can be applied to many time separations and many individual matrix elements simultaneously but does not fully exploit the matrix structure of the correlation function. We combine both these methods into a single framework based on matrix polynomials which we call block Prony method (BPM).
Fleming, George T.↗
(U) A General-Purpose Code for Correlated Sampling Using Batch Statistics with MCNP6 for Fixed-Source Problems
Correlated sampling can be used to reduce the uncertainty of a difference of tallies by taking advantage of the negative covariance term in the sandwich formula. Booth first showed how correlated sampling can be applied with batch statistics using MCNP’s tally fluctuation chart (TFC) to reduce the uncertainty of a difference of tallies in fixed-source problems. Booth presented a problem in which a 1273% uncertainty in a difference was reduced to 8% by accounting for correlations. Researchers He and Su recently studied correlated sampling using the TFC in MCNP version 5. They determined that the code did not print enough digits in the TFC tally means for accurate batch statistics in some cases. After modifying the source code, they concluded that “correlated sampling can yield a standard deviation of about one magnitude smaller than that predicted by the direct, un-correlated simulation when the changes in system response are small (say about 1%), which is equivalent to saving in CPU time by a factor of 100. Such saving [sic] becomes less significant as the change in system response becomes larger.” He and Su provided the formulas needed to apply batch statistics to compute the correlated uncertainty of a difference of tallies. In this report, we follow up on their work by providing the formulas needed to apply batch statistics to compute the correlated uncertainty of a ratio of tallies and of a difference of two tallies divided by a third tally. We extend these formulas to differences and ratios of ratios. These formulas are applied to reduce the uncertainty associated with calculating a relative sensitivity. He and Su did not investigate the accuracy of their correlated sampling uncertainty estimates. We use their test problems and evaluate the accuracy of the uncertainty estimates by comparing with results obtained from random sampling, and, in simple cases, with theoretical values of the “exact” uncertainties. We find that the uncertainties obtained from batch statistics are accurate as long as at least 100 batches are used. We present a new computer code, COSUBS (COrrelated Sampling Using Batch Statistics), that reads MCNP6 TFCs and applies correlated sampling using batch statistics for the tally combinations that the user specifies. COSUBS is a very general tool that compares all TFCs for a base case and one or two perturbed cases. It computes uncertainties for ratios if given only a base case. This report is organized as follows. The equations to apply batch statistics to the difference of random tallies are reviewed in Sec. II. Section III presents the equations for applying batch statistics to a ratio of random tallies; this is useful for computing relative sensitivities using a one-sided finite difference and the relative sensitivity using the differential operator method. Section IV presents the equations for applying batch statistics to a difference of two random tallies divided by a third; this is useful for computing a relative sensitivities using a central difference. Section V presents the equations for applying batch statistics to a difference of two ratios with four random tallies. Section VI presents the equations for applying batch statistics to a one-sided finite difference estimate of the relative sensitivity of a ratio (this uses four random tallies). Section VII presents the equations for applying batch statistics to a central difference estimate of the relative sensitivity of a ratio (this uses six random tallies). Section VIII presents the equations for applying batch statistics to a sum of random tallies. Section IX discusses how to apply batch statistics using MCNP6. Section X presents COSUBS, describing its command-line options and logic. Sections XI through XVI present numerical results for various test problems. Section XVII is a summary and conclusions. Appendix A derives the theoretical Monte Carlo tally variance given certain assumptions; these variances are used to verify the batch statistics for some of the problems. Appendix B lists the MCNP6 input for the unperturbed example problem. Appendix C presents modifications made to MCNP6.3 to support this work.
97 MATHEMATICS AND COMPUTING↗
Generalizing HEPCloud Split Starter for Multiple Sites and Experiments
This talk discusses changes we made to the HEPCloud Split Starter to be able to reuse the software in multiple HPC sites across different experiments. I will explain the changes we made to the configuration system, how we generalized the project’s scripts, and the steps we took to reduce the application’s footprint on HPC shared storage, among other details.
72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
Generalized wakefield of a microbunched electron cooler
In a previous note [1] we developed theoretical and computational tools for the study of microbunched electron cooling (MBEC [2]) in the three-dimensional regime. In this context, we were able to treat the key space charge effect in a rigorous fashion by taking explicitly into account the point-charge nature of the particles involved (electrons and hadrons). In this report, we build upon our earlier analysis by taking into consideration previously neglected effects that can cause Landau damping in the amplifier section (such as focusing, betatron oscillations and the angular spread of the electron beam). Beginning with the theoretical aspect of this work, we use our modified and expanded tools in order to calculate and study the generalized, point-hadron wakefield of the system, an important quantity that affects the cooling performance.
43 PARTICLE ACCELERATORS↗
PyEmittance: A General Python Package for Particle Beam Emittance Measurements With Adaptive Quadrupole Scans [Poster]
We present PyEmittance: a new Python package for general particle beam emittance measurements that offers adaptive quadrupole scans and is designed for robust and flexible integration with Python-based software, with online accelerators, and with simulation software. It is open source software, and can be installed via the command pip install pyemittance.
43 PARTICLE ACCELERATORS↗
A general mechanistic framework for cross-scale understanding of hot spots and hot moments in carbon and water fluxes
Semi-arid ecosystems, like those in the American Southwest, exert a massive impact on the interannual variability of carbon and water cycling. Unfortunately, these carbon and water fluxes are notoriously difficult to predict due to their high spatial and temporal variability, which is poorly captured by the current generation of vegetation models. Indeed, this region is exemplified by the ‘hot spots and hot moments’ concept, which states that small areas in space (‘hot spots’) and transient moments in time (‘hot moments’) exert an outsized influence on biogeochemical cycling. However, the factors that regulate these pulses in biogeochemical activity are unknown, as is their variability across space and time. These uncertainties severely limit efforts to better represent hot spots and hot moments in models. Here, we seek to develop a generalized method for detecting and quantifying the importance of hot spots and hot moments from individual plant to regional scales. Underpinning this method is our recently developed statistical approach for identifying hot spots and hot moments. By applying this method to semi-continuous measurements of plant water status, a depth profile of soil water potential, and ecosystem fluxes via eddy covariance, we will track the fate of water through the soil-plant-atmosphere continuum and identify the mechanistic drivers of these transient pulses in biogeochemical activity. Then, we will expand this approach across a broad network of Ameriflux towers, and apply a machine learning approach that will allow us to upscale measurements of hot spots and hot moments across the American Southwest and quantify their impact on carbon and water cycles. These products will allow us to identify hot spots and hot moments across spatio-temporal scales and will serve as crucial data sources for validating a new generation of models that can better capture highly dynamic carbon and water fluxes. The proposed method will be easily transferable across biomes and will serve as a framework for future research on hot spots and hot moments across the plant ecophysiology, biometeorology, and vegetation modeling communities.
54 ENVIRONMENTAL SCIENCES↗
Joint Comments from the Department of Energy, National Nuclear Security Administration (DOE NNSA) Los Alamos Field Office and Triad National Security, LLC on the U.S. Environmental Protection Agency’s New Mexico State-Wide Municipal Separate Storm Sewer System Strawman General Permit
In December 2020 and March 2021, EPA issued two MS4 strawman permit drafts specific to the Los Alamos area. EPA made text changes in the 2 nd strawman permit based on stakeholder comments related to the initial draft. During the public meeting on the Los Alamos area designation decision held on February 13, 2024, EPA staff stated that comments from the past strawman permits would be incorporated into the new MS4 permit to be issued state-wide. However, it does not appear that any of the text changes from the 2 nd Los Alamos area strawman permit were included in this state-wide general MS4 strawman permit. For reference, the 2 nd Los Alamos area revised strawman permit is included with these comments as Attachment 2. Many of the following comments refer to or state EPA’s updated text included in the 2 nd Los Alamos area strawman permit. The updated text from this 2 nd strawman permit that are referenced in the following comments should be applicable state-wide and it is suggested that this past work be reconsidered and incorporated.
54 ENVIRONMENTAL SCIENCES↗
Savannah River National Laboratory – General Fusion 2023 INFUSE Report (Rev.1)
This report describes the results from an INFUSE research project, where Savannah River National Laboratory (SRNL) in collaboration with General Fusion (GF) used process modeling to understand and optimize commercial power plant (CPP) fuel cycle designs based on parameters provided by GF. The study primarily focused on two candidate fuel cycles with different blanket materials, one with a lead lithium eutectic (LLE) blanket and the other with a pure lithium (Li) blanket. LLE benefits from a low melting point, favorable neutronics, and lower reactivity, but liquid lithium has the potential for higher tritium breeding ratios (TBR) and does not poison the plasma as a high Z contaminant. It was found that the main differences between LLE and Li designs are the extraction technologies required to remove tritium from the blanket and the amount of tritium and its distribution within the facility. More than 80% of the in-process tritium inventory for the LLE design is contained in the isotope separation system, while for the Li design, over 60% of the in-process tritium inventory is contained within the blanket material. This is due to significant tritium retention by Li. For the Li blanket, the burden of tritium processing rests on the blanket extraction technology rather than the traditional exhaust processing route. Thus, the blanket extraction technology is a main driver of tritium inventory in the Li system and determines the subsequent interface with the tritium processing plant.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Two-stage Stochastic Generalized Disjunctive Programming (GDP) Model for Proactive Planning and Reactive Operations of Resilient Power Systems under Disruptions
In this work, we propose a Generalized Disjunctive Programming (GDP) model that optimizes both long-term capacity planning (such as the number and size of dispatchable/renewable generators, batteries, and transmission lines) and hourly operation (such as on/off schedules of dispatchable generators, power output from each generator, and power flow) to maximize power system reliability while minimizing total cost and CO2 emissions.
Cho, Seolhee↗
Building ControlScore: General Service Administration Office Building Deployment
Improvements to building control systems can lead to energy savings and increased occupant comfort. In an optimized system, process variables such as air temperature will closely follow their desired setpoints and avoid excess energy use. Typically, experts must manually inspect individual control loops to identify poor performance and opportunities for improvement. However, this approach is difficult in modern buildings that have a prohibitively large number of controllers. To address this issue, Pacific Northwest National Laboratory (PNNL) created the ControlScore concept, which takes operating data from the many controllers within a building and generates standardized scores for each loop on a scale of 0 to 10 (a score of 0 indicates poor control, a score of 10 indicates good control). PNNL applied the Building ControlScore application to all available data from a General Services Administration office building within the period of January 1, 2023, to March 9, 2023. The building scored a 4.7 overall, with all 74 of the building’s loops fitting a roughly normal distribution centered around 5. These results indicate that the analyzed systems have below-average performance with room for improvement, especially in the poorly scored systems. Airflow loops tended to have much lower scores than zone temperature loops. The lowest and highest performing systems in the building section were identified, as were all loops with a score less than 1. While the ControlScore identifies loops and systems that aren’t meeting their designated setpoints, it does not indicate the cause of those issues. For example, consider a supply air terminal unit’s airflow loop that received a low score due to it delivering less air than specified by the setpoint. The lower-than-desired airflow could be due to equipment limitations (e.g., the terminal unit or duct serving is too small to accommodate that airflow), malfunctioning equipment (e.g., a stuck damper or bad sensor), or something else entirely. The ControlScore does not diagnose problems it simply identifies the symptoms that can be explored and addressed by building operators.
32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
Interpreting Forced Oscillation Notifications from ESAMS: General Guidance for Reliability Coordinators
The Eastern Interconnection Situational Awareness Monitoring System (ESAMS) project demonstrated the feasibility of aggregating synchrophasor measurements from across an interconnection, analyzing them, and providing real-time wide-area situational awareness to system operators who may have excellent visibility within their footprint but lack an interconnection-wide view. An application within ESAMS that has garnered industry interest involves detecting forced oscillations visible across multiple areas, identifying the region where the oscillation originated from, quantifying the uncertainty in source localization results, and notifying users in real-time if the detected oscillation amplitudes cross a specified threshold. It is expected that system operators will utilize their internal SCADA/EMS/synchrophasor systems in conjunction with information provided by ESAMS to take effective mitigation actions if forced oscillation notifications are received. This report provides some general guidance on how the ESAMS information can be used for source localization and coordination among multiple reliability coordinators; and also identifies potential enhancements to ESAMS notifications for improved interpretability.
24 POWER TRANSMISSION AND DISTRIBUTION↗
Development and Evaluation of a General Drag Model for Gas-Solid Flows via Deep Learning
This project presents the development and evaluation of a general drag model for gas–solid multiphase flows using deep learning techniques. A comprehensive database of more than 4,000 experimental and numerical data points for spherical and non spherical particles was compiled, incorporating geometric features such as sphericity, aspect ratio, and orientation. Several predictive approaches—including traditional em pirical correlations, machine learning, and deep neural networks—were benchmarked, with the proposed Drag Coefficient Correlation-aided Deep Neural Network (DCC DNN) demonstrating superior accuracy. To account for particle–particle interactions, additional drag data were generated using CFD-based simulations of packed and flu idized beds, leading to the development of a retrained model capable of incorporat ing volume fraction effects. Integration of the trained model with the MFiX CFD solver was achieved using FTorch, enabling drag predictions during discrete element method (DEM) simulations. Validation against experimental data for single particles and fluidized beds confirmed the model’s improved predictive ability, particularly for non-spherical geometries. While the model performed strongly under fluidized con ditions, limitations remained in unfluidized regimes, suggesting a need for expanded datasets. Overall, this study demonstrates the feasibility of combining deep learning with physics-informed CFD to improve drag modeling for gas–solid flows, with promis ing implications for scaling multiphase simulations in industrial applications.
42 ENGINEERING↗
The Risk Assessment Information System Compendium of Ecological Screening Benchmarks for Chemicals and Radionuclides (2025) (Volume VIII – Chemicals for Sediment: General)
Volume VIII presents the chemical benchmarks for sediment: general. The benchmarks here are applicable to both freshwater sediments and marine sediments or where no differentiation was made by the source. These values are not repeated in the freshwater sediment and marine sediment categories. Likewise, values listed in the freshwater sediment and marine sediment categories are not repeated in the generic categories. Consult Volume I for information on the sources.
54 ENVIRONMENTAL SCIENCES↗