Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “fractional diffusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Insights into the mechanisms controlling the residual corrosion rate of borosilicate glasses

Borosilicate glasses are widely used to confine high-level radioactive wastes. The lifetime of these materials could reach hundreds of thousands of years if leaching of the glass into groundwater enables the formation of a passivating gel layer. Even in this regime, the glass will never stop corroding as thermodynamic equilibrium between glass and solution cannot be achieved. Therefore, accurate predictions of glass durability including passivation, require a deep understanding of the mechanisms controlling the so-called residual rate. However, despite tremendous efforts, these mechanisms remain poorly understood. Here, focusing on the behavior of the soluble elements of the International Simple Glass (B, Na, and Ca), we show that the residual rate is controlled by the behavior of B, a glass former supposed to dissolve instantaneously when in contact with water and thus widely considered as an ideal tracer. We then demonstrate that B release is controlled by multiple processes highly dependent on the pH. At the beginning of the passivating layer formation, the hydrolysis of B-O-Si linkages is rate-limiting and has an activation energy of ~60 kJ mol –1 , a value slightly lower than that for breaking Si-O-Si linkages. Once the fraction of closed pores resulting from gel restructuring is high enough, then diffusion of both reactants (water molecules) and some products (mainly B aq , Ca aq ) through the growing gel layer becomes rate-limiting. Consequently, B and Ca accumulate in an inner layer referred to as the active zone, with potential feedback on the B-O-Si hydrolysis. A new paradigm, including B as a key element of the system, is proposed to develop a comprehensive model for the corrosion of borosilicate glass.

36 MATERIALS SCIENCE↗

THE EXCEPTIONAL SOFT X-RAY HALO OF THE GALAXY MERGER NGC 6240

We report on a recent {approx}150 ks long Chandra observation of the ultraluminous infrared galaxy merger NGC 6240, which allows a detailed investigation of the diffuse galactic halo. Extended soft X-ray emission is detected at the 3{sigma} confidence level over a diamond-shaped region with projected physical size of {approx}110 Multiplication-Sign 80 kpc, and a single-component thermal model provides a reasonably good fit to the observed X-ray spectrum. The hot gas has a temperature of {approx}7.5 million K, an estimated density of 2.5 Multiplication-Sign 10{sup -3} cm{sup -3}, and a total mass of {approx}10{sup 10} M{sub Sun }, resulting in an intrinsic 0.4-2.5 keV luminosity of 4 Multiplication-Sign 10{sup 41} erg s{sup -1}. The average temperature of 0.65 keV is quite high to be obviously related to either the binding energy in the dark-matter gravitational potential of the system or the energy dissipation and shocks following the galactic collision, yet the spatially resolved spectral analysis reveals limited variations across the halo. The relative abundance of the main {alpha}-elements with respect to iron is several times the solar value, and nearly constant as well, implying a uniform enrichment by type II supernovae out to the largest scales. Taken as a whole, the observational evidence is not compatible with a superwind originated by a recent, nuclear starburst, but rather hints at widespread, enhanced star formation proceeding at a steady rate over the entire dynamical timescale ({approx}200 Myr). The preferred scenario is that of a starburst-processed gas component gently expanding into, and mixing with, a pre-existing halo medium of lower metallicity (Z {approx} 0.1 solar) and temperature (kT {approx} 0.25 keV). This picture cannot be probed more extensively with the present data, and the ultimate fate of the diffuse, hot gas remains uncertain. Under some favorable conditions, at least a fraction of it might be retained after the merger completion, and evolve into the hot halo of a young elliptical galaxy.

79 ASTRONOMY AND ASTROPHYSICS↗

Cosmic rays from leptonic dark matter

If dark matter possesses a lepton number, it is natural to expect the dark-matter annihilation and/or decay mainly produces the standard model leptons, while negligible amount of the antiproton is produced. To illustrate such a simple idea, we consider a scenario that a right-handed sneutrino dark matter decays into the standard model particles through tiny R-parity violating interactions. Interestingly enough, charged leptons as well as neutrinos are directly produced, and they can lead to a sharp peak in the predicted positron fraction. Moreover, the decay of the right-handed sneutrino also generates diffuse continuum gamma rays which may account for the excess observed by EGRET, while the primary antiproton flux can be suppressed. Those predictions on the cosmic-ray fluxes of the positrons, gamma rays and antiprotons will be tested by the PAMELA and FGST observatories.

79 ASTRONOMY AND ASTROPHYSICS↗

AXIAL RATIO OF EDGE-ON SPIRAL GALAXIES AS A TEST FOR BRIGHT RADIO HALOS

We use surface brightness contour maps of nearby edge-on spiral galaxies to determine whether extended bright radio halos are common. In particular, we test a recent model of the spatial structure of the diffuse radio continuum by Subrahmanyan and Cowsik which posits that a substantial fraction of the observed high-latitude surface brightness originates from an extended Galactic halo of uniform emissivity. Measurements of the axial ratio of emission contours within a sample of normal spiral galaxies at 1500 MHz and below show no evidence for such a bright, extended radio halo. Either the Galaxy is atypical compared to nearby quiescent spirals or the bulk of the observed high-latitude emission does not originate from this type of extended halo. (letters)

79 ASTRONOMY AND ASTROPHYSICS↗

Mechanical behavior at high temperatures of highly oxygen- or hydrogen-enriched α and prior-β phases of Zirconium alloys - 2016-0063

During a hypothetical loss-of-coolant accident, zirconium alloy fuel claddings can be loaded by internal pressure and exposed to steam at high temperatures (HTs) up to 1,200 deg. C and then cooled and quenched in water. A significant fraction of the oxygen that reacts with the cladding during HT oxidation diffuses beneath the oxide through the metallic substrate. This induces a progressive transformation of the metallic β{sub Zr}-phase layer into an intermediate layer of α{sub Zr}(O) phase containing up to 7 weight % (wt.%) oxygen. Furthermore, in some specific conditions, the cladding may rapidly absorb a significant amount of hydrogen during steam exposition at HTs. As a β{sub Zr} stabilizer, hydrogen would mainly diffuse and concentrate up to several thousands of parts per million by weight (wppm) into the inner β{sub Zr}-phase layer. This study intends to provide new and more comprehensive data on the HT mechanical behavior of the α{sub Zr}(O) and (prior-)β{sub Zr} phases containing high contents of oxygen and hydrogen, respectively. Model samples produced from M5{sup R} and Zircaloy-4 cladding tubes homogeneously charged in oxygen (less than or equal to 6 wt.%) and hydrogen (less than or equal to 3,000 wppm), respectively, were prepared. Their mechanical behavior was determined under vacuum between 800 and 1,100 deg. C for the oxygen-enriched α{sub Zr} phase and in air between 700 and 20 deg. C after cooling from the β{sub Zr} temperature domain for the hydrogen-enriched (prior-)β{sub Zr} phase. The α{sub Zr} phase was substantially strengthened and embrittled by oxygen. The contribution of the α{sub Zr}(O) layer to the HT creep behavior of an oxidized fuel cladding tube subjected to internal pressure is evaluated by finite element analysis. Mechanical strength and ductility of the model (prior-)β{sub Zr} phase appear to be affected by hydrogen contents of 2000-3000 wppm in ways that depend on temperature. (authors)

36 MATERIALS SCIENCE↗

An asymptotic description of transient settling and ultrafiltration of colloidal dispersions

The present model for the sedimentation of colloidal systems includes a diffusion term in the governing equation which, in the regions above the sediment, acts as small perturbation to the Kynch (1952) theory. Within the sediment, diffusion is comparable to convection due to the the high solid volume fraction. An application of the method of matched asymptotic expansions to the conservation equation allows a complete description of the settling process to be formulated, with specific attention to volume-fraction evolution in the sediment.

Davis, K. E.↗

Chemical and physical effects in the bulk of cometary analogs

KOSI comet simulation experiments were designed as a macroscopic tester for the studies of physicochemical problems inherent to comet bodies. The analog samples consist of H2O and CO2 ice, organic admixtures, mineral dust, and carbon. Two of the fundamental changes the analogs undergo when submitted to 'insolation' by artificial sunlight, i.e., the diffusion of frozen gases and subsequent crust formation and the natural isotopic fractionation, are reported.

Roessler, K.↗

The Effects of Flame Structure on Extinction of CH4-O2-N2 Diffusion Flames

The effects of flame structure on the extinction limits of CH4-O2-N2 counterflow diffusion flames were investigated experimentally and numerically by varying the stoichiometric mixture fraction Z(sub st), Z(sub st) was varied by varying free-stream concentrations, while the adiabatic flame temperature T(sub ad) was held fixed by maintaining a fixed amount of nitrogen at the flame. Z(sub st) was varied between 0.055 (methane-air flame) and 0.78 (diluted- methane-oxygen flame). The experimental results yielded an extinction strain rate K(sub ext) of 375/s for the methane-air flame, increasing monotonically to 1042/s for the diluted-methane-oxygen flame. Numerical results with a 58-step Cl mechanism yielded 494/s and 1488/s, respectively. The increase in K(sub ext) with Z(sub st) for a fixed T(sub ad) is explained by the shift in the O2 profile toward the region of maximum temperature and the subsequent increase in rates for chain-branching reactions. The flame temperature at extinction reached a minimum at Z(sub st) = 0.65, where it was 200 C lower than that of the methane-air flame. This significant increase in resistance to extinction is seen to correspond to the condition in which the OH and O production zones are centered on the location of maximum temperature.

Du, J.↗

Clear Evidence for Fe-60 in Silicate from a Semarkona Chondrule

Fe-60 (t(sub 1/2) = 1.5 Ma) is key to understanding the sources of short-lived radionuclides in the early solar system because it is the only one among those known from meteoritic material that is produced only in stars [1]. Within the last year, it has become clear that Fe-60 was present in sulfides from primitive ordinary and enstatite chondrites in amounts sufficient to require a recent stellar input [2-5]. The sulfide data indicate an initial Fe-60/Fe-56 ratio for the early solar system of between approx. 3 10(exp -7) and approx. 1.6 10(exp -6) [2-4]. However, iron (and nickel?) in sulfides is easily mobilized by very mild heating [e.g., 6], so there is considerable uncertainty over the true initial ratio. To resolve this uncertainty, we have begun a search for evidence of Fe-60 in silicates from primitive chondrites. In olivine from type 3.0-3.1 ordinary chondrites, diffusive exchange of iron and magnesium has not occurred to any significant degree, and diffusive exchange in pyroxene is slower [7]. However, the relatively small elemental fractionation of iron from nickel in silicates, coupled with the fact that the daughter nuclide, Ni-60, makes up approx. 26 % of normal nickel, make detection of excesses of radiogenic Ni-60 very difficult. Fortunately, we have found a fine-grained radiating-pyroxene chondrule in Semarkona (LL3.0) with a very high Fe/Ni ratio that gives clear evidence of Fe-60.

Huss, G. R.↗

Apparent I-Xe Cooling Rates of Chondrules Compared with Silicates from the Colomera Iron Meteorite

In I-Xe dating, a regular pattern of increasing Xe-129/128Xe-128 ratio with increasing extraction temperature is often observed. If one makes the crude assumption that the temperatures at which the Xe is extracted in the laboratory is approximately the same as the temperature at which those sites closed 4.6 Ga ago, a (zeroth order) model cooling rate can be found. In order to test and refine this model we can apply the cooling theory of Dodson to those extraction steps approaching the I-Xe isochrons. Using an Arrhenius plot for these temperature fractions, and assuming that an only single phase is involved, the effective diffusion parameters can be estimated (frequency factor and activation energy). From the apparent (zeroth order) cooling rate, the closure temperature can be estimated from the Dodson equation. This model closure temperature can then be compared with the actual laboratory temperature at which the isochron begins. The ratio of the closure temperature and the temperature corresponding to the start of the isochron provides the ratio of the two temperature scales, incorporation and extraction. The actual cooling rate is then given by the apparent (zeroth order) cooling rate times the temperature scale factor. Figure 1 shows Arrhenius plots for I-Xe data

Hohenberg, C. M.↗

MICROSTRUCTURE EVOLUTION MODELING FOR SOLUTION TREATMENT OF ALUMINUM ALLOYS

The microstructure evolution during solution treatment plays an important role in mechanical properties of heat-treated aluminum alloys. In this paper, models were reviewed that can predict the microstructure evolution during the solutionizing process of the aging heat treatment of aluminum alloys. The dissolution of Mg2Si particles has been modeled as a diffusion process of Mg in the -Al matrix. The evolution of volumetric fraction of fragmented silicon as a function of time and temperature was also considered. The growth and coarsening of silicon particles during the heat treatment was considered. It was found that constitutive equations and required property data for most of the phenomena that need to be considered are available. Several model parameters that need to be obtained from material characterization were identified. Pending the availability of these model parameters, this comprehensive model can be used to describe the microstructure evolution of aluminum alloys in order to optimize the solutionizing heat treatment for energy savings.

Yin, Hebi↗

Analyzing the effects of temperature on soot formation with a joint volume-surface-hydrogen model

The intent of the current work is to present and further validate a new tri-variate model for the formation of soot particles, to apply this model in analyzing the effects of temperature on the formation and growth of soot, and to compare the findings with the present understanding derived from numerous experimental studies. In this novel model, a particle is represented as a fractal shaped aggregate and is described by three independent quantities: the volume, the surface area, and the number of hydrogenated sites (or active sites) on the surface. The introduction of this third variable allows for a better description of the surface reactivity at high temperatures. This approach is extended by a model for the total carbon-to-hydrogen (C/H) ratio of the particle. The model is validated first in high temperature premixed ethylene flames, premixed benzene flames, an acetylene counterflow diffusion flame, and toluene pyrolysis in shock-tubes. Then, the soot volume fraction is computed for a series of atmospheric laminar ethylene premixed flames with varying flame temperatures. The soot model is shown to reproduce the well known bell-shaped temperature dependence of soot volume fraction, which was found in many experiments. It is observed that nucleation is the largest contributor to soot volume fraction at low temperatures while growth by surface reactions is more important at higher temperatures. The surface reactivity and the volumetric carbon-to-hydrogen ratio (C/H) are also computed as a function of temperature. The surface reactivity is found to depend not only on the temperature but also on the particle size and the residence time in the flame. Finally, as observed experimentally, the C/H ratio is found to be essentially constant and close to unity for low temperature flames and increases with residence time in high temperature flames. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Corrected Distortion model for Lagrangian spray simulation of transcritical fuel injection

In this work, we present a detailed implementation and validation of the droplet modeling framework proposed by Dahms and Oefelein (2016) into the engine commercial CFD software CONVERGE using the User Defined Function (UDF) interface. The model accounts for the nonlinear deformation and oscillation experienced by liquid spray droplet injected into high pressure and temperature. Lagrangian spray simulations of Engine Combustion Network (ECN) Spray A are performed. Model validation against standard experimental measurements of liquid velocity, vapor mixture fraction is conducted. To perform more rigorous model validation, new experimental measurements based on Diffused Back Illumination (DBI) are introduced. The new measurements are processed for Projected Liquid Volume (PLV), which offers as close as possible one-to-one model validation for liquid penetration while offering new insights into the spray physics. Comparison with a One-D model based on adiabatic mixing theory by Siebers (1999) and Desantes et al. (2007) are also conducted. Through these model validation exercises, it is shown that the new framework improves liquid-phase penetration predictions, following a tendency for enhanced evaporation, compared to the standard approach for both Reynolds Average Navier Stokes (RANS) and Large Eddy Simulation (LES). Additionally, at the liquid length, maximum mixture fraction values predicted by the new approach are in good agreement those of an adiabatic mixing model. Qualitative analysis of the spray behaviors during the early stage of the injection process reveals that the proposed framework predicts significant increase in droplet evaporation rate with lower drop drag compared to the current standard approach.

42 ENGINEERING↗

Nonadiabatic Flamelet Formulation for Predicting Wall Heat Transfer in Rocket Engines

A flamelet-based combustion model is introduced for the prediction of wall heat transfer in rocket engines and confined combustion systems. To account for convective heat loss due to the interaction of the flame with the wall, a permeable thermal boundary condition is introduced in the counterflow diffusion flame configuration. The solution of the resulting nonadiabatic flame structure forms a three-dimensional manifold, which is parameterized in terms of mixture fraction, progress variable, and temperature. The performance of the model is first assessed through a direct numerical simulation analysis of an H 2 /O 2 diffusion flame that is stabilized at an inert isothermal wall. The developed nonadiabatic flamelet model is shown to accurately predict the temperature, chemical composition, and wall heat transfer. Combined with a presumed probability density function closure, the model is then applied to large-eddy simulation of a single-injector rocket combustor to examine effects of heat transfer on the turbulent flame structure in rocket engines.

42 ENGINEERING↗

Total X-Ray Emission from the LMC Observed with HaloSat

We constrain the global parameters of the Large Magellanic Cloud (LMC) by modeling the first soft X-ray (0.4–6.8 keV) observations of the entire LMC produced in a single pointing with moderate spectral resolution by the HaloSat CubeSat. These data are best fit with the sum of two thermal plasma components in collisional ionization equilibrium and a power law. We find cool (0.210 ± 0.014 keV) and hot (0.89 ± 0.14 keV) components. The total X-ray luminosity of the LMC is (1.08 ± 0.14) × 10{sup 39} erg s{sup −1}. X-ray binaries make up a large fraction of the emission with a luminosity of (6.0 ± 0.8) × 10{sup 38} erg s{sup −1}, followed by cool gas from superbubbles, supernovae, and diffuse emission with a luminosity of (3.0 ± 0.3) × 10{sup 38} erg s{sup −1}. The hot gas from star formation contributes the smallest fraction, with a luminosity of (1.9 ± 0.5) × 10{sup 38} erg s{sup −1}. We estimate the total volume of the cool gas to be between (0.2–1.2) × 10{sup 10} pc{sup 3} and the hot gas to be between (1.0–5) × 10{sup 7} pc{sup 3} for filling factors of f = 1 and 0.2. These volumes result in a total thermal energy for the cool gas between (1.4–3) × 10{sup 54} erg for electron densities of 0.017–0.04 cm{sup −3}, and a thermal energy for the hot gas between (1.7–4) × 10{sup 53} erg for electron densities of 0.12–0.3 cm{sup −3}. This yields cooling timescales for the cool and hot gas of (1.5–3) × 10{sup 8} yr and (1.8–6) × 10{sup 7} yr, respectively.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Properties of grains derived from IRAS observations of dust

The authors used the results of Infrared Astronomy Satellite (IRAS) observations of diffuse medium dust to develop a theoretical model of the infrared properties of grains. Recent models based entirely on traditional observations of extinction and polarization include only particles whose equilibrium temperatures do not exceed 20 K in the diffuse interstellar medium. These classical grains, for which the authors have adopted the multipopulation model developed by Hong and Greenberg (1980), can explain only the emission in the IRAS 100 micron band. The measurements at shorter wavelengths (12, 25 and 60 microns) require two new particle populations. Vibrational fluorescence from aromatic molecules provides the most likely explanation for the emission observed at 12 microns, with polycyclic aeromatic hydrocarbons (PAHs) containing about 10 percent of cosmic carbon. A simplified model of the emission process shows that PAH molecules can also explain most of the emission measured by IRAS at 25 microns. The authors identified the warm particles responsible for the excess 60 microns emission with small (a approx. equals 0.01 microns) iron grains. A compilation of the available data on the optical properties of iron indicates that the diffuse medium temperature of small iron particles should be close to 50 K and implies that a large, possibly dominant, fraction of cosmic iron must be locked up in metallic particles in order to match the observed 60 microns intensities. The model matches the infrared fluxes typically observed by IRAS in the diffuse medium and can also reproduce the infrared surface brightness distribution in individual clouds. In particular, the combination of iron and classical cool grains can explain the surprising observations of the 60/100 microns flux ratio in clouds, which is either constant or increases slightly towards higher opacities. The presence of metallic grains has significant implications for the physics of the interstellar medium, including catalytic H2 formation, for which iron grains could be the main site; differences in depletion patterns between iron and other refractory elements (Mg, Si); and superparamagnetic behavior of large grains with embedded iron clusters giving rise to the observed high degree of alignment by the galactic magnetic field.

Wesselius, P. R.↗

A spectral analysis of the domain decomposed Monte Carlo method for linear systems

The domain decomposed behavior of the adjoint Neumann-Ulam Monte Carlo method for solving linear systems is analyzed using the spectral properties of the linear operator. Relationships for the average length of the adjoint random walks, a measure of convergence speed and serial performance, are made with respect to the eigenvalues of the linear operator. In addition, relationships for the effective optical thickness of a domain in the decomposition are presented based on the spectral analysis and diffusion theory. Using the effective optical thickness, the Wigner rational approximation and the mean chord approximation are applied to estimate the leakage fraction of stochastic histories from a domain in the decomposition as a measure of parallel performance and potential communication costs. The one-speed, two-dimensional neutron diffusion equation is used as a model problem to test the models for symmetric operators. In general, the derived approximations show good agreement with measured computational results. (authors)

97 MATHEMATICS AND COMPUTING↗

A Computational Investigation of Sooting Limits of Spherical Diffusion Flames

Limiting conditions for soot particle inception in spherical diffusion flames were investigated numerically. The flames were modeled using a one-dimensional, time accurate diffusion flame code with detailed chemistry and transport and an optically thick radiation model. Seventeen normal and inverse flames were considered, covering a wide range of stoichiometric mixture fraction, adiabatic flame temperature, and residence time. These flames were previously observed to reach their sooting limits after 2 s of microgravity. Sooting-limit diffusion flames with residence times longer than 200 ms were found to have temperatures near 1190 K where C/O = 0.6, whereas flames with shorter residence times required increased temperatures. Acetylene was found to be a reasonable surrogate for soot precursor species in these flames, having peak mole fractions of about 0.01.

Lecoustre, V. R.↗