Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “forced oscillation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
NASA NTRS1996

Suppression of Dynamic Stall by Steady and Pulsed Upper-Surface Blowing

The Boeing-Vertol VR-7 airfoil was experimentally studied with steady and pulsed upper-surface blowing for sinusoidal pitching oscillations described by alpha = alpha(sub m) + 10 deg sin(omega t). The tests were conducted in the U.S. Army Aeroflightdynamics Directorate's Water Tunnel at NASA Ames Research Center. The experiment was performed at a Reynolds number of 100,000. Pitch oscillations with alpha(sub m) = 10 deg and 15 deg and with reduced frequencies ranging from k = 0.005 to 0.15 were examined. Blowing conditions ranged from C(sub mu) = 0.03 to 0.66 and F(+) = 0 to 3. Unsteady lift, drag, and pitching-moment loads were measured, and fluorescent-dye flow visualizations were obtained. Steady, upper-surface blowing was found to be capable of trapping a separation bubble near the leading edge during a portion of the airfoil's upward rotation. When this occurred, the lift was increased significantly and stall was averted. In all cases, steady blowing reduced the hysteresis amplitudes present in the loads and produced a large thrust force. The benefits of steady blowing diminished as the reduced frequency and mean angle of oscillation increased. Pulsed blowing showed only marginal benefits for the conditions tested. The greatest gains from pulsed blowing were achieved at F(+) = 0.9.

Weaver, D.↗
NASA NTRS2008

Analytical Model of the Nonlinear Dynamics of Cantilever Tip-Sample Surface Interactions for Various Acoustic-Atomic Force Microscopies

A comprehensive analytical model of the interaction of the cantilever tip of the atomic force microscope (AFM) with the sample surface is developed that accounts for the nonlinearity of the tip-surface interaction force. The interaction is modeled as a nonlinear spring coupled at opposite ends to linear springs representing cantilever and sample surface oscillators. The model leads to a pair of coupled nonlinear differential equations that are solved analytically using a standard iteration procedure. Solutions are obtained for the phase and amplitude signals generated by various acoustic-atomic force microscope (A-AFM) techniques including force modulation microscopy, atomic force acoustic microscopy, ultrasonic force microscopy, heterodyne force microscopy, resonant difference-frequency atomic force ultrasonic microscopy (RDF-AFUM), and the commonly used intermittent contact mode (TappingMode) generally available on AFMs. The solutions are used to obtain a quantitative measure of image contrast resulting from variations in the Young modulus of the sample for the amplitude and phase images generated by the A-AFM techniques. Application of the model to RDF-AFUM and intermittent soft contact phase images of LaRC-cp2 polyimide polymer is discussed. The model predicts variations in the Young modulus of the material of 24 percent from the RDF-AFUM image and 18 percent from the intermittent soft contact image. Both predictions are in good agreement with the literature value of 21 percent obtained from independent, macroscopic measurements of sheet polymer material.

Cantrell, John H., Jr.↗
NASA NTRS1998

Experiment 5: Science and Technology of Surface Controlled Oscillations: Report on USML-2 Results

Minuscule amounts (e.g., 1 part in 10,000) of a surface-active material in a liquid can drastically affect the surface behavior of the liquid, influencing how the material flows and mixes with other liquid and solid materials. In many respects, the science of surfactants has been empirical, with trial and error dominating over the ability to predict how surfactant type and concentration influence surface behavior. A program for the modeling of surfactant behavior has been established at Yale. This program combines experimental work performed both on the ground and in space, and theoretical and numerical modeling. By levitating a drop of liquid in air, away from solid container surfaces, and by manipulating the drop with acoustic radiation forces, we have been able to establish idealized conditions for surface behavior studies. The primary experiments involve the study of the free oscillations of initially deformed drops. In STS-73, the USML-2 mission of the Space Shuttle, we performed the following measurements: 1) the oscillation of a spherical drop in its quadrupole mode; 2) the oscillation of a drop about a deformed (oblate) shape; 3) the slow static squeezing of the drop from spherical to nearly flat; and 4) the superoscillations of drops when the radiation forces maintaining the drop in a flattened state are suddenly reduced. Analytic and numerical studies have enabled us to understand the physics of these oscillations and to extract material properties such as the dynamic surface tension and the surface viscosities (shear and dilatational). The relation to ground-based studies is essential, because the knowledge and understanding gleaned from our space studies enable us to interpret ground-based data.

Apfel, Robert E.↗
NASA NTRS1995

User's Guide for ECAP2D: an Euler Unsteady Aerodynamic and Aeroelastic Analysis Program for Two Dimensional Oscillating Cascades, Version 1.0

This guide describes the input data required for using ECAP2D (Euler Cascade Aeroelastic Program-Two Dimensional). ECAP2D can be used for steady or unsteady aerodynamic and aeroelastic analysis of two dimensional cascades. Euler equations are used to obtain aerodynamic forces. The structural dynamic equations are written for a rigid typical section undergoing pitching (torsion) and plunging (bending) motion. The solution methods include harmonic oscillation method, influence coefficient method, pulse response method, and time integration method. For harmonic oscillation method, example inputs and outputs are provided for pitching motion and plunging motion. For the rest of the methods, input and output for pitching motion only are given.

Reddy, T. S. R.↗
NASA NTRS1986

Energetics and optimum motion of oscillating lifting surfaces of finite span

In certain modes of animal propulsion in nature, such as bird flight and fish swimming, the efficiency compared to man-made vehicles is very high. In such cases, wing and tail motions are typically associated with relatively high Reynolds numbers, where viscous effects are confined to a thin boundary layer at the surface and a thin trailing wake. The propulsive forces, which are generated primarily by the inertial forces, can be calculated from potential-flow theory using linearized unsteady-wing theory (for small-amplitude oscillations). In the present study, a recently developed linearized, low-frequency, unsteady lifting-line theory is employed to calculate the (sectional and total) energetic quantities and optimum motion of an oscillating wing of finite span.

Ahmadi, A. R.↗
NASA NTRS1991

The physics of the oscillating lightning

The lightning is proposed to start in a limited region of electric breakdown field. A growing charge pool in a cumulonimbus cloud is likely to produce such a field in its outer layers. When the field is not aligned with the potential surfaces, the electric force pushes positive charge in one direction and negative in the opposite. Self inductance develops and an embryo open electric circuit is born. Oscillations swiftly grow in strength when potential energy of the cloud is released. The channel extends in steps during those cycle stages where charge is crammed into the channel terminals. Electrostatic consequences of a narrow conductor among the cloud charges are computed. The conductor is charged by influence to such a degree that the charge is bound to leak out to the ambient air and appear as a charge sheath some distance off the channel. Ample energy is released to sustain the oscillations. The period increases with channel length and agrees well with observed time between steps. A ground strike leads to a shock pulse travelling up the channel.

Storebo, Per B.↗
NASA NTRS1990

Measured forces and moments on a delta wing during pitch-up

A series of low-speed wind tunnel tests on a 70-deg, sharp, leading-edge delta wing undergoing ramp pitching motion of high amplitude were performed to investigate the aerodynamic forces and moments. Forces and moments were obtained from a six-component interanl balance. Large amplitude oscillatory motion was produced by sinusoidally oscillating the model over a range of reduced frequencies. Ramp motion was produced by pitching the model through a half cycle of sinusoidal motion at a root chord Reynolds number of 1.54 million. The effect of ramp and oscillatory motions on the forces and moments are almost identical at matched pitch rates. Pitch rate had strong effect on the magnitude of the aerodynamic forces and moments. Upon completion of the model motion, some time is required for the forces and moments to decay to their static values. This convergence of the dynamic values to the static ones was a function of the pitch rate.

Bragg, M. B.↗
NASA NTRS1976

Numerical simulation of low gravity draining

A boundary value problem was solved numerically for a liquid that is assumed to be inviscid and incompressible, having a motion that is irrotational and axisymmetric, and having a constant (5 degrees) solid-liquid contact angle. The avoidance of excessive mesh distortion, encountered with strictly Lagrangian or Eulerian kinematics, was achieved by introducing an auxiliary kinematic velocity field along the free surface in order to vary the trajectories used in integrating the ordinary differential equations simulating the moving boundary. The computation of the velocity potential was based upon a nonuniform triangular mesh which was automatically revised to varying depths to accommodate the motion of the free surface. These methods permitted calculation of draining induced axisymmetric slosh through the many (or fractional) finite amplitude oscillations that can occur depending upon the balance of draining, gravitational, and surface tension forces. Velocity fields, evolution of the free surface with time, and liquid residual volumes were computed for three and one half decades of Weber number and for two Bond numbers, tank fill levels, and drain radii. Comparisons with experimental data are very satisfactory.

Bizzell, G. D.↗
NASA NTRS1991

Streaming effect of wall oscillation to boundary layer separation

This paper presents a preliminary theoretical result on the time averaged streaming effect of local forcing excitation to the boundary layer separation from smooth surface. The problem is formulated as a periodic disturbance to a basic steady breakaway separating flow, for which the data are taken from a numerical triple-deck solution. The ratio of Strouhal number St and Reynolds number Re plays an important role, both being assumed sufficiently high. The analytical and numerical results show that this streaming effect is quite strong at proper values of St/Re exp 1/4, which may delay or even suppress the separation.

Wu, X. H.↗
NASA NTRS1990

Circumnutations of sunflower hypocotyls in satellite orbit

The principal objective of the research reported here was to determine whether a plant's periodic growth oscillations, called circumnutations, would persist in the absence of a significant gravitational or inertial force. The definitive experiment was made possible by access to the condition of protracted near weightlessness in an earth satellite. The experiment, performed during the first flight of Spacelab on the National Aeronautics and Space Administration shuttle, Columbia, in November and December, 1983, tested a biophysical model, proposed in 1967, that might account for circumnutation as a gravity-dependent growth response. However, circumnutations were observed in microgravity. They continued for many hours without stimulation by a significant g-force. Therefore, neither a gravitational nor an inertial g-force was an absolute requirement for initiation [correction of initation] or continuation of circumnutation. On average, circumnutation was significantly more vigorous in satellite orbit than on earth-based clinostats. Therefore, at least for sunflower (Helianthus annuus L.) circumnutation, clinostatting is not the functional equivalent of weightlessness.

NASA Discipline Plant Biology↗
NASA NTRS1947

Theoretical Analysis and Bench Tests of a Control-Surface Booster Employing a Variable Displacement Hydraulic Pump

The NACA is conducting a general investigation of servo-mechanisms for use in powering aircraft control surfaces. This paper presents a theoretical analysis and the results of bench tests of a control-booster system which employs a variable displacement hydraulic pump. The booster is intended for use in a flight investigation to determine the effects of various booster parameters on the handling qualities of airplanes. Such a flight investigation would aid in formulating specific requirements concerning the design of control boosters in general. Results of the theoretical analysis and the bench tests indicate that the subject booster is representative of types which show promise of satisfactory performance. The bench tests showed that the following desirable features were inherent in this booster system: (1) No lost motion or play in any part of the system; (2) no detectable lag between motion of the contra1 stick and control surface; and (3) Good agreement between control displacements and stick-force variations with no hysteresis in the stick-force characteristics. The final design configuration of this booster system showed no tendency to oscillate, overshoot, or have other undesirable transient characteristics common to boosters.

Mathews, Charles W.↗
NASA NTRS2021

Solving Global Cirrus Cloud Top-of-the-Atmosphere Radiative Forcing from Satellite Lidar

We estimate top-of-the-atmosphere (TOA) cirrus cloud radiative forcing from satellite lidar observations. We describe the technical innovations necessary to conduct this experiment. Specifically, we highlight advances in broadband radiative transfer modeling, and the optical and physical parameterizations necessary to run them. We present two years of results, across two decades (2008 vs. 2018), highlighting seasonal and annual differences. The goal of this endeavor is to standardize mechanics for transitioning this work to operational Level 2 ground and satellite lidar products moving forward. However, the unique TOA forcing characteristics of cirrus clouds are also discussed, including specifically daytime characteristics than can oscillate between warming and cooling regionally.

James R Campbell↗
NASA NTRS2000

A statistical model of the human core-temperature circadian rhythm

We formulate a statistical model of the human core-temperature circadian rhythm in which the circadian signal is modeled as a van der Pol oscillator, the thermoregulatory response is represented as a first-order autoregressive process, and the evoked effect of activity is modeled with a function specific for each circadian protocol. The new model directly links differential equation-based simulation models and harmonic regression analysis methods and permits statistical analysis of both static and dynamical properties of the circadian pacemaker from experimental data. We estimate the model parameters by using numerically efficient maximum likelihood algorithms and analyze human core-temperature data from forced desynchrony, free-run, and constant-routine protocols. By representing explicitly the dynamical effects of ambient light input to the human circadian pacemaker, the new model can estimate with high precision the correct intrinsic period of this oscillator ( approximately 24 h) from both free-run and forced desynchrony studies. Although the van der Pol model approximates well the dynamical features of the circadian pacemaker, the optimal dynamical model of the human biological clock may have a harmonic structure different from that of the van der Pol oscillator.

NASA Discipline Regulatory Physiology↗
NASA NTRS1991

South Pacific convergence zone and global-scale circulations

The major goals of the research can be classified under three categories: (1) heat and moisture budget studies in the tropics; (2) the role of tropical forcing on subtropical wind maxima in the Southern Hemisphere; and (3) general circulation modeling of low latitude circulations. Research related to the first goal included budget estimates of precipitation, as well as a comparison to rainfall rates observed at numerous island stations. It also included a comparison between observed and satellite estimates of precipitable water. Results and methods used to achieve this goal are given. Included in the second research goal were diagnostic studies of the intraseasonal oscillation which is known to be an important component of organized tropical convection. Also, the role of extratropical forcing on subtropical wind maxima was examined through the use of Eliassen-Palm (EP) fluxes. Again, results and procedural details are discussed in section 3. To accomplish the third research goal, the GLA general circulation model (GCM) was ported to Purdue University and successfully used in a number of control and experimental runs to investigate the significance of tropical heating on subtropical and extratropical circulation features. As with the first two research goals, results and methodology are detailed. Documentation of publications, theses, conference preprint papers, and other scientific information relevant to the research results and significant accomplishments achieved under the contract are given. Finally, the conclusions of the sponsored research are given.

Vincent, Dayton G.↗
NASA NTRS1999

Sensitivity of the Tropical Ocean-Atmosphere to Seasonal and Long-Term Climate Forcing

Since the pioneer works of Bjerknes (1966,1969) many studies have been conducted to understand the El Nino and Southern Oscillation (ENSO) phenomenon. These studies have led to a basic understanding of the dynamics of El Nino. Central to the couple dynamics of ENSO is the delayed action oscillator theory (Suarez and Schopf 1988), which successfully describes the cyclic feature of El Nino. While the oscillatory feature of El Nino is reasonably well understood, the irregularity of El Nino, the effect of monsoon on ENSO, and the response of coupled system to the global warming are still under debate. In the present study, we attempt to provide some theoretical understanding of possible impacts of seasonal cycle, monsoon, and climate changes on ENSO using intermediate coupled model.

Kim, K.-M.↗
NASA NTRS1993

Exact element modal analysis of beam/oscillator systems

Exact modal analysis of a beam/many-oscillator system is presented. Each oscillator consists of a discrete mass having rotational inertia, and two locally-dependent springs: one being rotational and the other, translational. A constant longitudinal force is applied to the mass, and its effect is coupled with the dynamic modes. The beam's distributed mass and other material properties, and its geometric properties, do not vary within spans bounded by the oscillators, but may vary from span to span. The classical separation-of-variables technique is used to obtain a dosedform description of the dynamic matrix, and the modal frequencies are determined as the zeros of this determinant.

Broome, Taft H., Jr.↗
NASA NTRS1981

Unsteady Newton-Busemann flow theory. Part 2: Bodies of revolution

Newtonian flow theory for unsteady flow past oscillating bodies of revolution at very high Mach numbers is completed by adding a centrifugal force correction to the impact pressures. Exact formulas for the unsteady pressure and the stability derivatives are obtained in closed form and are applicable to bodies of revolution that have arbitrary shapes, arbitrary thicknesses, and either sharp or blunt noses. The centrifugal force correction arising from the curved trajectories followed by the fluid particles in unsteady flow cannot be neglected even for the case of a circular cone. With this correction, the present theory is in excellent agreement with experimental results for sharp cones and for cones with small nose bluntness; gives poor agreement with the results of experiments in air for bodies with moderate or large nose bluntness. The pitching motions of slender power-law bodies of revulution are shown to be always dynamically stable according to Newton-Busemann theory.

Hui, W. H.↗