Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “evaluation datasets”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
NASA NTRS2024

Expanded Signal to Noise Ratio Estimates for Validating Next-Generation Satellite Sensors in Oceanic, Coastal, and Inland Waters

The launch of the NASA Plankton, Aerosol, Cloud, ocean Ecosystem (PACE) and the Surface Biology and Geology (SBG) satellite sensors will provide increased spectral resolution compared to existing platforms. These new sensors will require robust calibration and validation datasets, but existing field-based instrumentation is limited in its availability and potential for geographic coverage, particularly for coastal and inland waters, where optical complexity is substantially greater than in the open ocean. The minimum signal-to-noise ratio (SNR) is an important metric for assessing the reliability of derived biogeochemical products and their subsequent use as proxies, such as for biomass, in aquatic systems. The SNR can provide insight into whether legacy sensors can be used for algorithm development as well as calibration and validation activities for next-generation platforms. We extend our previous evaluation of SNR and associated uncertainties for representative coastal and inland targets to include the imaging sensors PRISM and AVIRIS-NG, the airborne-deployed C-AIR radiometers, and the shipboard HydroRad and HyperSAS radiometers, which were not included in the original analysis. Nearly all the assessed hyperspectral sensors fail to meet proposed criteria for SNR or uncertainty in remote sensing reflectance (R rs ) for some part of the spectrum, with the most common failures (>20% uncertainty) below 400 nm, but all the sensors were below the proposed 17.5% uncertainty for derived chlorophyll-a. Instrument suites for both in-water and airborne platforms that are capable of exceeding all the proposed thresholds for SNR and R rs uncertainty are commercially available. Thus, there is a straightforward path to obtaining calibration and validation data for current and next-generation sensors, but the availability of suitable high spectral resolution sensors is limited.

signal-to-noise ratio↗
NASA NTRS2008

Statistical Evaluation of Combined Daily Gauge Observations and Rainfall Satellite Estimations over Continental South America

This paper describes a comprehensive assessment of a new high-resolution, high-quality gauge-satellite based analysis of daily precipitation over continental South America during 2004. This methodology is based on a combination of additive and multiplicative bias correction schemes in order to get the lowest bias when compared with the observed values. Inter-comparisons and cross-validations tests have been carried out for the control algorithm (TMPA real-time algorithm) and different merging schemes: additive bias correction (ADD), ratio bias correction (RAT) and TMPA research version, for different months belonging to different seasons and for different network densities. All compared merging schemes produce better results than the control algorithm, but when finer temporal (daily) and spatial scale (regional networks) gauge datasets is included in the analysis, the improvement is remarkable. The Combined Scheme (CoSch) presents consistently the best performance among the five techniques. This is also true when a degraded daily gauge network is used instead of full dataset. This technique appears a suitable tool to produce real-time, high-resolution, high-quality gauge-satellite based analyses of daily precipitation over land in regional domains.

Vila, Daniel↗
NASA NTRS2018

Modeling the Distribution and Type of High-Latitude Natural Wetlands for Methane Studies

High latitude (>50N) natural wetlands emit a substantial amount of methane to the atmosphere, and are located in a region of amplified warming. Northern hemisphere high latitudes are characterized by cold climates, extensive permafrost, poor drainage, short growing seasons, and slow decay rates. Under these conditions, organic carbon accumulates in the soil, sequestering CO2 from the atmosphere. Methanogens produce methane from this carbon reservoir, converting stored carbon into a powerful greenhouse gas. Methane emission from wetland ecosystems depends on vegetation type, climate characteristics (e.g, precipitation amount and seasonality, temperature, snow cover, etc.), and geophysical variables (e.g., permafrost, soil type, and landscape slope). To understand how wetland methane dynamics in this critical region will respond to climate change, we have to first understand how wetlands themselves will change and therefore, what the primary controllers of wetland distribution and type are. Understanding these relationships permits data-anchored, physically-based modeling of wetland distribution and type in other climate scenarios, such as paleoclimates or future climates, a necessary first step toward modeling wetland methane emissions in these scenarios. We investigate techniques and datasets for predicting the distribution and type of high latitude (>50N) natural wetlands from a suite of geophysical and climate predictors. Hierarchical clustering is used to derive an empirical methane-centric wetland model. The model is applied in a multistep process first to predict the distribution of wetlands from relevant geophysical parameters, and then, given the predicted wetland distribution, to classify the wetlands into methane-relevant types using an expanded suite of climate and biogeophysical variables. As the optimum set of predictor variables is not known a priori, the model is applied iteratively, and each simulation is evaluated with respect to observed high-latitude wetlands.

Romanski, Joy↗
NASA NTRS2021

A Chlorophyll-a Algorithm for Landsat-8 Based on Mixture Density Networks

Retrieval of aquatic biogeochemical variables, such as the near-surface concentration of chlorophyll-a (Chla) in inland and coastal waters via remote observations, has long been regarded as a challenging task. This manuscript applies Mixture Density Networks (MDN) that use the visible spectral bands available by the Operational Land Imager (OLI) aboard Landsat-8 to estimate Chla. We utilize a database of co-located in situ radiometric and Chla measurements (N = 4,354), referred to as Type A data, to train and test an MDN model (MDN(A)). This algorithm’s performance, having been proven for other satellite missions, is further evaluated against other widely used machine learning models (e.g., support vector machines), as well as other domain-specific solutions (OC3), and shown to offer significant advancements in the field. Our performance assessment using a held-out test data set suggests that a 49% (median) accuracy with near-zero bias can be achieved via the MDN(A) model, offering improvements of 20 to 100% in retrievals with respect to other models. The sensitivity of the MDN(A) model and benchmarking methods to uncertainties from atmospheric correction (AC) methods, is further quantified through a semi-global matchup dataset (N = 3,337), referred to as Type B data. To tackle the increased uncertainties, alternative MDN models (MDN(B)) are developed through various features of the Type B data (e.g., Rayleigh-corrected reflectance spectra ρ(s)). Using held-out data, along with spatial and temporal analyses, we demonstrate that these alternative models show promise in enhancing the retrieval accuracy adversely influenced by the AC process. Results lend support for the adoption of MDN(B) models for regional and potentially global processing of OLI imagery, until a more robust AC method is developed. Index Terms—Chlorophyll-a, coastal water, inland water, Landsat-8, machine learning, ocean color, aquatic remote sensing.

Brandon Smith↗
NASA NTRSDate not supplied

Development of Solar Flare and Energetic Particle Prediction Portal (SEP 3 )

Solar activity is a primary factor determining the state of the Earth’s space environment, geomagnetic and ionospheric disturbances, and radiation hazards. In the current state of knowledge, machine learning (ML) methods provide essential tools for processing data, investigating relationships among various physical properties and characteristics, uncovering hidden connections, and predicting hazardous solar events. The primary difficulty in developing and applying modern machine-learning tools in heliophysics is that the essential data are scattered among over a hundred data repositories developed by instrument teams of space missions and ground-based observatories. In addition, statistical and ML methods require long time series of homogeneous measurements. To facilitate ML-ready data preparation and access, we have developed an interactive database of solar flares integrating the most essential datasets (https://solarflare.njit.edu/). The database performs an initial data processing and is automatically updated. In addition, we are developing the Solar Energetic Particle Prediction Portal (SEP3, https://sun.njit.edu/SEP3), which hosts web applications that allow users to retrieve the database records. The Portal has a search page for browsing the events from the most widely used catalogs and a dedicated space to share the most recent achievements of the team. The interactive widget can display soft X-ray and proton flux time series from GOES satellites and the flare records. The data portal has been used to evaluate the forecasts of solar proton events and investigate machine-learning approaches to SEP prediction.

SMD↗
NASA NTRS2021

Tonlé Sap Food Security & Agriculture III: Evaluating Changes in Ecosystem Vitality and Freshwater Health in the Tonlé Sap Basin using Remotely Sensed Data

Tonlé Sap Lake, located in Cambodia, Southeast Asia, is one of the most productive inland fisheries in the world. With the unique reverse flow hydrology of the Tonlé Sap River, this freshwater system contains rich biodiversity and provides critical freshwater resources for the local community. Overfishing, stronger seasonality, drought, dam construction, forest fires, and untreated industrial domestic sewage threaten the ecosystem vitality and economic success of Tonlé Sap. In collaboration with Conservation International and the Cambodian Ministry of Water Resources and Meteorology’s Tonlé Sap Authority, we calibrated and finalized remotely-sensed proxies for sub-indicators of the Freshwater Health Index (FHI). We used NASA Earth observation data from Moderate Resolution Imaging Spectroradiometer (MODIS), and the Gravity Recovery and Climate Experiment (GRACE). These datasets were used in RS proxies and a Soil and Water Assessment Tool (SWAT) model that previous teams developed for sub-indicators of FHI. They included landcover, bank modification, and water quality metrics. It was determined that the ground water storage in Tonlé Sap Lake exhibited a slight declining trend over from April 1st, 2002 to February 3rd, 2017. To calculate chlorophyll-a concentration in the Tonlé Sap Lake, we used Copernicus Global Land Service mission data which provided a Trophic State Index of the lake. Between January 1st, 2000 and December 31st, 2020, the lake and surrounding region within the study area boundary displayed a slight decrease in vegetation density and consistently high chlorophyll-a concentrations. The SWAT model calculated nitrogen and phosphorus content measured in outlet points of the lake. We demonstrated that remotely sensed data is valuable for providing additional information for the FHI, but is not fully capable of replacing its in situ counterpart. We also concluded the water quantity is on a slowly declining trend within the basin.

Joey Lindsay↗
NASA NTRSDate not supplied

Document Classification Techniques for Aviation Letters of Agreement

Often when working with historic air traffic management (ATM) documents, it is helpful to classify them into specific categories. In this paper, we conduct a thorough review of natural language processing techniques to perform this classification task on Letters of Agreement (LOAs), technical aviation documents outlining rules for utilizing US airspace. We evaluate multiple techniques for representing the text in the documents as embeddings: unigram and bigram Term Frequency Inverse Document Frequency (TFIDF), Word2Vec, Doc2Vec, GloVe and RoBERTa. We investigate a wide range of classification models: K-Nearest Neighbors, Random Forest, Support Vector Machines (SVM), Logistic Regression, Naive Bayes, Feed-Forward Neural Network, Convolutional Neural Networks (CNNs) and Long-Short Term Memory (LSTM). By comparing the different methods, we found the best overall approach for our task was to use unigram TFIDF representations with SVM while also gaining insight into how the other methodologies performed on a small technical datasets.

ATM↗
NASA NTRSDate not supplied

Document Classification Techniques for Aviation Letters of Agreement

Often when working with historic air traffic management (ATM) documents, it is helpful to classify them into specific categories. In this paper, we conduct a thorough review of natural language processing techniques to perform this classification task on Letters of Agreement (LOAs), technical aviation documents outlining rules for utilizing US airspace. We evaluate multiple techniques for representing the text in the documents as embeddings: unigram and bigram Term Frequency Inverse Document Frequency (TFIDF), Word2Vec, Doc2Vec, GloVe and RoBERTa. We investigate a wide range of classification models: K-Nearest Neighbors, Random Forest, Support Vector Machines (SVM), Logistic Regression, Naive Bayes, Feed-Forward Neural Network, Convolutional Neural Networks (CNNs) and Long-Short Term Memory (LSTM). By comparing the different methods, we found the best overall approach for our task was to use unigram TFIDF representations with SVM while also gaining insight into how the other methodologies performed on a small technical datasets.

ATM↗
NASA NTRS1993

The SSABLE system - Automated archive, catalog, browse and distribution of satellite data in near-real time

Historically, locating and browsing satellite data has been a cumbersome and expensive process. This has impeded the efficient and effective use of satellite data in the geosciences. SSABLE is a new interactive tool for the archive, browse, order, and distribution of satellite date based upon X Window, high bandwidth networks, and digital image rendering techniques. SSABLE provides for automatically constructing relational database queries to archived image datasets based on time, data, geographical location, and other selection criteria. SSABLE also provides a visual representation of the selected archived data for viewing on the user's X terminal. SSABLE is a near real-time system; for example, data are added to SSABLE's database within 10 min after capture. SSABLE is network and machine independent; it will run identically on any machine which satisfies the following three requirements: 1) has a bitmapped display (monochrome or greater); 2) is running the X Window system; and 3) is on a network directly reachable by the SSABLE system. SSABLE has been evaluated at over 100 international sites. Network response time in the United States and Canada varies between 4 and 7 s for browse image updates; reported transmission times to Europe and Australia typically are 20-25 s.

Simpson, James J.↗
NASA NTRS2019

Global Validation of Columnar Water Vapor Derived from EOS MODIS-MAIAC Algorithm Against the Ground-Based AERONET Observations

The water vapor is a relevant greenhouse gas in the Earth's climate system, and satellite products become one of the most effective way to characterize and monitor the columnar water vapor (CWV) content at global scale. Recently, a new product (MCD19) was released as part of MODIS (Moderate Resolution Imaging Spectroradiometer) Collection 6 (C6). This operational product from the Multi-Angle Implementation for Atmospheric Correction (MAIAC) algorithm includes a high 1-kilometer resolution CWV retrievals. This study presents the first global validation of MAIAC C6 CWV obtained from MODIS MCD19A2 product. This evaluation was performed using Aerosol Robotic Network (AERONET) observations at 265 sites (2000-2017). Overall, the results show a good agreement between MAIAC/AERONET CWV retrievals, with correlation coefficient higher than 0.95 and RMS (Root Mean Square) error lower than 0.250 centimeters. The binned error analysis revealed an underestimation (approximately 10 percent) of Aqua CWV retrievals with negative bias for CWV higher than 3.0 centimeters. In contrast, Terra CWV retrievals show a slope of regression close to unity and a low mean bias of 0.075 centimeters. While the accuracy is relatively similar between 1.0 and 5.0 centimeters for both sensor products, Terra dataset is more reliable for applications in humid tropical areas (less than 5.0 centimeters). The expected error was defined as plus or minus 15 percent, with less than 68 percent of retrievals falling within this envelope. However, the accuracy is regionally dependent, and lower error should be expected in some regions, such as South America and Oceania. Since MODIS instruments have exceeded their design lifetime, time series analysis was also presented for both sensor products. The temporal analysis revealed a systematic offset of global average between Terra and Aqua CWV records. We also found an upward trend (approximately 0.2 centimeters per decade) in Terra CWV retrievals, while Aqua CWV retrievals remain stable over time. The sensor degradation influences the ability to detect climate signals, and this study indicates the need for revisiting calibration of the MODIS bands 17-19, mainly for Terra instrument, to assure the quality of the MODIS water vapor product. Finally, this study presents a comprehensive validation analysis of MAIAC CWV over land, raising the understanding of its overall quality.

MAIAC↗
NASA NTRSDate not supplied

Requirement Discovery Using Embedded Knowledge Graph with ChatGPT

The field of Advanced Air Mobility (AAM) is witnessing a transformation with innovations such as electric aircraft and increasingly automated airspace operations. Within AAM, the Urban Air Mobility (UAM) concept focuses on providing air-taxi services in densely populated urban areas. This research introduces the utilization of Large Language Models (LLMs), such as OpenAI's GPT-4, to enhance the UAM Requirement discovery process. This study explores two distinct approaches to leverage LLMs in the context of UAM Requirement discovery. The first approach evaluates the LLM's ability to provide responses without relying on additional outside systems, such as a relational or graph database. Instead, a vector store provides relevant information to the LLM based on the user’s question, a process known as Retrieval Augmented Generation (RAG). The second approach integrates the LLM with a graph database. The LLM acts as an intermediary between the user and the graph database, translating user questions into cypher queries for the database and database responses into human-readable answers for the user. Our team implemented and tested both solutions to analyze requirements within a UAM dataset. This paper will talk about our approaches, implementations, and findings related to both approaches.

systems engineering↗
NASA NTRSDate not supplied

Overview of SatCORPS Satellite-Derived Cloud and Radiation Retrieval Coverage of ARM Domains

The ARM Climate Research Facility program maintains a number of climatically representative sites, which provide long-term cloud- and climate-monitoring records via ground-based instrumentation. These measurements provide a valuable data record over a localized region, but can be greatly enhanced by use of satellite monitoring. Satellite analyses over larger domains can provide parameters helpful for monitoring climate and evaluating models. The NASA/Langley Cloud group routinely derives such cloud and radiative parameters, from various geostationary and polar-orbiting satellite coverage over ARM sites; the group provides near-realtime analyses covering the 3 ARM fixed sites, as well as the GO-Amazon AMF site. This is accomplished by employing a suite of algorithms including VISST (Visible Infrared Solar Split-Window Technique), SIST (Solar Infrared Split-Window Technique), and SINT (Solar-infrared Infrared Near-Infrared Technique), now collectively called SatCORPS (Satellite Cloud Observations and Radiative Property retrieval System). An overview and catalog of SatCORPS-derived datasets processed for ASR, and available from both the ARM archive and the NASA/Langley Cloud group website, is provided. Specific improvements included in recently added datasets such as GO-Amazon and Azores are highlighted, including an improved cloud-detection mask, as well as improvements in derived Top-of-Atmosphere (TOA) SW albedoes and LW fluxes. New narrowband-to-broadband (NB-BB) fits and corrections for improved TOA fluxes are illustrated, including MTSAT-1/CERES Aqua NB-BB fits for the TWPICE field campaign, as well as new fits covering the Azores region which incorporate GERB TOA fluxes (Geostationery Earth Radiation Budget). Finally, validation of the reprocessed SatCORPS datasets is shown.

M M Khader↗
NASA NTRSDate not supplied

Examining Artifacts from GLOBE Program Research Symposia & Using Network Analysis Techniques to Characterize Students’ Authentic STEM Investigations

For the past several years, the GLOBE Program's International Virtual Science Symposia (IVSS) and Student Research Symposia (SRS) have provided opportunities for U.S. and international students to present their Earth science research investigations to the GLOBE community through online or in-person events. This presentation will share the techniques and findings of an evaluation study that used student posters and written reports to characterize their research investigations through multiple lenses and frameworks. The study began with a list of characteristics drawn from a literature review, an analysis of sample projects, and several reviews by expert stakeholders and scientists, which comprehensively covered diverse relevant frameworks including citizen science, student STEM learning through authentic experiences, and The GLOBE Program model. Once applied to 207 student projects, this list of codes revealed the frequency and prevalence of various qualities and experiences represented by GLOBE student research investigations. An innovative application of social network analysis techniques to the coded dataset revealed frequently cooccurring characteristics. This networking approach identified and conceptually mapped several "clusters" of characteristics that typified student projects, empirically based on the submitted projects themselves. The basic quantitative investigation of frequencies indicates the extent to which various characteristics are present in - or absent from - GLOBE SRS and IVSS projects, while the network analysis provides a descriptive framework for typifying projects. Ultimately, the descriptive framework fostered a suite of assessment tools to help The GLOBE Program's staff, scientists, and research project judges understand the diversity of student research projects. GLOBE can use these tools to identify and respond to areas of need; for instance, the descriptive framework illustrates the potential for further education and training resources related to data analysis, interpretation of data, and credibility of scientific claims. This presentation will share the novel utilization of network analysis techniques to holistically assess and react to student research contributions.

Ann Martin↗
NASA NTRSDate not supplied

Document Classification Techniques for Aviation Letters of Agreement

Often when working with technical documents, it is helpful to classify them into specific categories. In this paper, we conduct a thorough review of natural language processing techniques to perform this classification task on Letters of Agreement (LOAs), technical aviation documents outlining rules for utilizing US airspace. We evaluate multiple techniques, including Transfer Learning, for representing the text in the documents as embeddings: unigram and bigram Term Frequency Inverse Document Frequency (TFIDF), Word2Vec, Doc2Vec, GloVe and RoBERTa. We investigate a wide range of classification models: K-Nearest Neighbors, Random Forest, Support Vector Machines (SVM), Logistic Regression, Naive Bayes, Feed-Forward Neural Network, Convolutional Neural Networks (CNNs) and Long-Short Term Memory (LSTM). By comparing the different methods, we found the best overall approach for our task was to use unigram TFIDF representations with SVM while also gaining insight into how the other methodologies performed on a small technical datasets.

Aayushi Batra↗
NASA NTRSDate not supplied

Requirement Discovery Using Embedded Knowledge Graph With ChatGPT

The field of Advanced Air Mobility (AAM) is witnessing a transformation with innovations such as electric aircraft and increasingly automated airspace operations. Within AAM, the Urban Air Mobility (UAM) con-cept focuses on providing air-taxi services in densely populated urban areas. This research introduces the utilization of Large Language Models (LLMs), such as OpenAI's GPT-4, to enhance the UAM Requirement discovery process. This study explores two distinct approaches to leverage LLMs in the context of UAM Requirement discovery. The first approach evaluates the LLM's ability to provide responses without relying on additional outside systems, such as a relational or graph database. Instead, a vector store provides relevant information to the LLM based on the user’s question, a process known as Retrieval Augmented Generation (RAG). The second approach integrates the LLM with a graph database. The LLM acts as an intermediary between the user and the graph database, translating user questions into cypher queries for the database and database responses into human-readable answers for the user. Our team implemented and tested both solutions to analyze require-ments within a UAM dataset. This paper will talk about our approaches, implementations, and findings related to both approaches.

systems engineering↗
NASA NTRSDate not supplied

Requirement Discovery Using Embedded Knowledge Graph With ChatGPT - Poster

The field of Advanced Air Mobility (AAM) is witnessing a transformation with innovations such as electric aircraft and increasingly automated airspace operations. Within AAM, the Urban Air Mobility (UAM) con-cept focuses on providing air-taxi services in densely populated urban areas. This research introduces the utilization of Large Language Models (LLMs), such as OpenAI's GPT-4, to enhance the UAM Requirement discovery process. This study explores two distinct approaches to leverage LLMs in the context of UAM Requirement discovery. The first approach evaluates the LLM's ability to provide responses without relying on additional outside systems, such as a relational or graph database. Instead, a vector store provides relevant information to the LLM based on the user’s question, a process known as Retrieval Augmented Generation (RAG). The second approach integrates the LLM with a graph database. The LLM acts as an intermediary between the user and the graph database, translating user questions into cypher queries for the database and database responses into human-readable answers for the user. Our team implemented and tested both solutions to analyze require-ments within a UAM dataset. This paper will talk about our approaches, implementations, and findings related to both approaches.

systems engineering↗
NASA NTRSDate not supplied

Application of the Global Precipitation Forecast dataset for Global Landslide Forecasting System

Landslides are extremely damaging, pervasive and cause fatalities and economic impacts. Extreme rainfall events, coupled with inopportune surface conditions, are the primary triggers of landslides around the world. Forecasting landslide events represent an area of open research. A global Landslide Hazard Assessment for Situational Awareness (LHASA) model has been created that provides near real-time dynamic landslide characterization using Integrated Multi-Satellite Retrievals for Global Precipitation Mission (IMERG). However, it does not provide information on prediction of landslides into future. This study considers how global precipitation forecast data compares to satellite rainfall at different spatiotemporal scales and outlines the potential for its use in landslide hazard prediction/forecasting system. NASA Goddard Earth Observing System (GEOS)-Forecast model assimilates new observations every 6 hours, at 00, 06, 12, and 18 UTC. The GEOS-Forecast model is initialized at 00 UTC and is evaluated with IMERG Early, using Multi-Radar Multi-Sensor gauge corrected (MRMS-GC) precipitation product as a reference over contiguous United States (CONUS). Categorical and continuous statistics along with probability density functions and cumulative distribution functions are considered to assess the performance of the precipitation products, with a focus on landslide hotspots. Seasonality appears to influence the performance of both the GEOS-Forecast and IMERG Early product. Moreover, the global comparison between the GEOS-Forecast and IMERG Early is carried out in terms of percentile difference, correlation, and bias maps. For extreme rainfall events in regions such as Mekong, Colombia, and Tajikistan, GEOS-Forecast appears to resolve high rainfall relative to IMERG Early more frequently. Validation over landslide points reveal that for 24hr rainfall accumulations > 100mm, GEOS-Forecast and IMERG coincide. GEOS-Forecast and IMERG Early precipitation matches more closely for tropical cyclones than other types of storms. Overall, the performance varies with respect to location, rainfall intensities, and type of precipitation events.

Sana Khan↗
NASA NTRS2002

Evaluation of Methods to Estimate the Surface Downwelling Longwave Flux during Arctic Winter

Surface longwave radiation fluxes dominate the energy budget of nighttime polar regions, yet little is known about the relative accuracy of existing satellite-based techniques to estimate this parameter. We compare eight methods to estimate the downwelling longwave radiation flux and to validate their performance with measurements from two field programs in thc Arctic: the Coordinated Eastern Arctic Experiment (CEAREX ) conducted in the Barents Sea during the autumn and winter of 1988, and the Lead Experiment performed in the Beaufort Sea in the spring of 1992. Five of the eight methods were developed for satellite-derived quantities, and three are simple parameterizations based on surface observations. All of the algorithms require information about cloud fraction, which is provided from the NASA-NOAA Television and Infrared Observation Satellite (TIROS) Operational Vertical Sounder (TOVS) polar pathfinder dataset (Path-P): some techniques ingest temperature and moisture profiles (also from Path-P): one-half of the methods assume that clouds are opaque and have a constant geometric thickness of 50 hPa, and three include no thickness information whatsoever. With a somewhat limited validation dataset, the following primary conclusions result: (1) all methods exhibit approximately the same correlations with measurements and rms differences, but the biases range from -34 W sq m (16% of the mean) to nearly 0; (2) the error analysis described here indicates that the assumption of a 50-hPa cloud thickness is too thin by a factor of 2 on average in polar nighttime conditions; (3) cloud-overlap techniques. which effectively increase mean cloud thickness, significantly improve the results; (4) simple Arctic-specific parameterizations performed poorly, probably because they were developed with surface-observed cloud fractions; and (5) the single algorithm that includes an estimate of cloud thickness exhibits the smallest differences from observations.

Chiacchio, Marc↗