Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electrocatalysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Modular Solar-to-Fuel Electrolysis at Low Cell Potentials Enabled by Glycerol Electrooxidation and a Bipolar Membrane Separator

Solar fuel generation through water electrolysis or electrochemical CO 2 reduction is thermodynamically limited when paired with the oxygen evolution reaction (OER). The glycerol electrooxidation reaction (GEOR) is an alternative anodic reaction with lower anodic electrochemical potential that utilizes a renewable coproduct produced during biodiesel synthesis. We show that GEOR on a Au-Pt-Bi ternary metal electrocatalyst in a model alkaline crude glycerol solution can provide significant cell potential reductions even when paired to reduction reactions in seawater and acidic catholytes via a bipolar membrane (BPM). We showed that the combination of GEOR electrooxidation and a BPM separator lowers the total cell potential by 1 V at an electrolysis current of 10.0 mA cm -2 versus to an anode performing OER when paired with hydrogen evolution and CO 2 reduction cathodes. The observed voltage reduction was steady for periods of up to 80 hours, with minimal glycerol crossover observed through the membrane. Furthermore, these results motivate new, high-performance cell designs for photoelectrochemical solar fuels integrated systems based on glycerol electrooxidation.

25 ENERGY STORAGE↗
DOE OSTI2024

Layered Sn-Au Thin Films for Increased Electrochemical ATR-SEIRAS Enhancement

Operando electrochemical attenuated total reflection surface-enhanced infrared absorption spectroscopy (EC ATR-SEIRAS) is a valuable method for a fundamental understanding of electrochemical interfaces under real operating conditions. The applicability of this method depends on the ability to tune the optical and catalytic properties of an electrode film, and it thus requires unique optimization for any given material. Motivated by the growing interest in Sn-based electrocatalysts for selective reduction of CO2 to formate species, we investigate several Sn thin-film synthesis routes for the resulting SEIRA signal response. We compare the SEIRA performance of thermally evaporated metallic Sn to a series of Sn-based films on top of a SEIRA-active Au substrate (metallic Sn, oxide-derived metallic Sn, and metal oxide SnOx). Using alkanethiol self-assembled monolayers as a probe, we find that electrodepositing metallic catalyst films on top of SEIRA-active Au substrates yield higher signal relative to thermal evaporation as well as higher signal than the independent SEIRA-active Au underlayer. These observations come despite the fact that thermally evaporated Sn has a significantly higher surface roughness (and thus higher adsorbate population), suggesting specific SEIRA-magnifying effects for the stacked films. Finally, we applied these films to observe the electrochemical conversion of CO2. Differences are observed in spectral features based on the composition of the electrode being either metallic or oxide-derived metallic Sn, implying differences in their respective reaction pathways.

CO2 reduction↗
DOE OSTI2024

Ketjenblack-Supported and Unsupported ZrO 2 –ZrN Nanoparticle Systems for Enabling Efficient Electrochemical Nitrogen Reduction to Ammonia

Artificial N 2 fixation via the electrocatalytic nitrogen (N 2 ) reduction reaction (NRR) has been recently promoted as a rational route toward reducing energy consumption and CO 2 emission as compared with the traditional Haber–Bosch process. Nevertheless, optimizing NRR relies on developing highly efficient electrocatalysts. Herein, we report on the reliable and reproducible synthesis of two promising electrocatalysts in either the presence or absence of Ketjenblack (KB), namely, ZrO 2 –ZrN@KB and ZrO 2 –ZrN systems, synthesized through the nitriding of Zr. Both materials had never previously been considered for NRR, to the best of our knowledge. Nevertheless, both of these electrocatalysts incorporated a combination of tetragonal ZrO 2 , ZrON, and cubic ZrN and showed excellent activity and durability toward NH 3 formation. Moreover, the maximum NH3 production rate of 84.1 μg h –1 mg –1 at -0.7 V vs a reversible hydrogen electrode (RHE) was achieved with the ZrO 2 –ZrN electrocatalyst with an impressive Faradaic efficiency of 21.2% at -0.6 V vs RHE, indicating a high selectivity associated with the NRR. Additionally, the catalysts demonstrated excellent stability during the electrolysis process and recycling tests. Here we postulate that the combination of exposed active sites of ZrN and ZrO 2 likely contributes to the enhanced NRR performance attributed to ZrO 2 –ZrN.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Nanoscopic Titanium Dioxide Overlayers Improve the Durability of Porphyrin Molecular Electrocatalysts while Maintaining Molecular Structure and Redox Activity

Molecular catalysts, such as metalated porphyrins, are attractive cocatalysts for photocatalytic water splitting owing to their potential to simultaneously catalyze target reactions at their metal center, extend charge-separated-state lifetimes, and accumulate the requisite charge for product formation. However, porphyrin catalysts, like most molecular catalysts, are often limited by poor stability associated with demetalation, inactivation by undesired bonding (e.g., O2 coordination/redox/dimerization), and detachment from electrode supports or semiconducting photoabsorbers. In this study, nanoscopic titanium dioxide (TiO2) overlayers, deposited by atomic layer deposition (ALD), are demonstrated to encapsulate cobalt(III) meso-tetra(4-carboxyphenyl) porphyrin chloride (CoTCPP) molecular catalysts and thereby improve their adhesion to electrode surfaces over a wide range of electrode potentials spanning from -1.0 V vs RHE to +1.8 V vs RHE. Through analysis of Raman and ultraviolet-visible spectroscopy, it was confirmed that the metalloporphyrin structure was maintained when the surface-bound CoTCPP was encapsulated by 10 - 250 ALD cycles (~2 - 18 nm thick) of TiO2. Additional characterization of CoTCPP catalysts before and after electrochemical measurements reveals that up to 97% of the encapsulated CoTCPP remains tethered to the electrode surface after chronoamperometry tests under hydrogen evolution reaction (HER) conditions, compared to <36% for unencapsulated CoTCPP. This study also shows that encapsulated CoTCPP molecules remain partially redox active for overlayers up to 8 nm, which can also attenuate undesired redox mediator back reactions like ferricyanide reduction.

08 HYDROGEN↗
DOE OSTI2025

Spin-Polarized Oxygen Evolution Reaction Enabled by Chiral Molecules Coupled with Ferromagnetic Electrocatalysts

The discovery of chirality-induced spin selectivity (CISS) revolutionized our understanding of the capabilities of chiral molecules, revealing that chiral molecules can function as spin filters, aligning the spin orientation of electrons when they transmit through them. Recently, CISS has been exploited to direct energy conversion, especially the oxygen evolution reaction (OER). However, despite the remarkable progress that has been achieved, the effect of CISS in influencing the intermediate species formation and changing the rate-determining step (RDS) is still vague. To understand those key reaction mechanism steps, electrocatalysts with distinct magnetic characteristics, ferromagnetic CoFe2O4 and paramagnetic Co3O4, were synthesized. The results show that spin-polarized charge carriers retain their spin alignment when coupled with ferromagnetic CoFe2O4, akin to the behavior observed under a magnetic field. The Tafel analysis and kinetic isotope studies (kinetic isotope effect) suggest that in the absence of chiral molecules, the initial electron transfer step, the formation of O* species, governs the rate-determining step (RDS). However, introducing chiral molecules shifts the RDS to a combination of the first and second electron transfers, leading to the formation of OOH*. This conclusion was further supported by in situ infrared spectroscopy, which shows that l-methionine-modified CoFe2O4 (l-CoFe2O4) promotes the formation of OOH*, a key intermediate for O2 generation. This study highlights the critical role of CISS in affecting the OER mechanism and intermediate species formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

In Situ Analysis of Manganese Antimonate Oxygen Evolution Electrocatalysts via Ambient Pressure X-ray Photoelectron Spectroscopy

Here, manganese antimonates are earth-abundant potential alternatives to precious metal catalysts for the oxygen-evolution reaction (OER). Herein, X-ray photoelectron spectroscopy was used to determine the surface chemistry of a manganese antimonate catalyst for the OER under ultra-high vacuum, ambient pressure, and in situ reaction conditions. Ex situ and in situ analysis revealed the oxidation states of surficial species as a function of material stoichiometry, water content, and applied potential. In situ XPS measurements in 1.0 M KOH(aq) indicated that relative to the rest state, the surface Mn(III) partially oxidized while effecting the OER, with approximately 15% of the Mn signal attributable to Mn(IV) and the remainder attributable to Mn(III).

36 MATERIALS SCIENCE↗
DOE OSTI2020

Water-Fed Hydroxide Exchange Membrane Electrolyzer Enabled by a Fluoride-Incorporated Nickel–Iron Oxyhydroxide Oxygen Evolution Electrode

Here, we have developed a dissolved oxygen and galvanic corrosion method to synthesize vertically aligned fluoride-incorporated nickel–iron oxyhydroxide nanosheet arrays on a compressed Ni foam as an efficient self-supported oxygen evolution electrode. It is integrated with poly(aryl piperidinium) hydroxide exchange membrane and ionomers with high ion exchange capacity into a hydroxide exchange membrane electrolyzer fed with pure water, which achieves a performance of 1020 mA cm –2 at 1.8 V and prevents the detachment of catalysts during continuous operation (>160 h at 200 mA cm –2 ). Furthermore, this work provides a potential pathway for massively producing low-cost hydrogen using intermittent renewable energy sources.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Electrocatalytic Oxidation of Alcohol with Cobalt Triphosphine Complexes

Coordination of the tridentate ligand bis(2-diphenylphosphinoethyl)phenylphosphine (P3) to cobalt forms [(CH3CN)2CoIIP3](BF4)2 (CoIIP3). In the presence of the Brönsted base iPr2EtN, CoIIP3 electrocatalytically oxidizes benzyl alcohol (BnOH) to benzaldehyde at an applied potential of -630 mV vs Fc+/0 with a TON of 19.9. In a noncatalytic reaction with excess BnOH and iPr2EtN, CoIIP3 is reduced by one electron to [(CH3CN)2CoIP3]BF4 (CoIP3) with concomitant formation of half an equivalent of benzaldehyde. This stoichiometric oxidation of BnOH suggests electron transfer occurs between intermediate cobalt species and starting CoIIP3. Kinetics and computational studies support an unfavorable alcohol binding preequilibrium step followed by favorable deprotonation of bound alcohol.

Electrocatalysis, Alcohol oxidation, Electrooxidat↗
DOE OSTI2021

Immobilization of “Capping Arene” Cobalt(II) Complexes on Ordered Mesoporous Carbon for Electrocatalytic Water Oxidation

We report the synthesis, characterization, and electrocatalytic water oxidation activity of two cobalt complexes, (6-FP)Co(NO 3 ) 2 (1) (6-FP = 8,8'-(1,2-phenylene)diquinoline) and (5-FP)Co(NO 3 ) 2 (2) (5-FP = 1,2-bis(N-7-azaindolyl)benzene), containing "capping arene" bidentate ligands with nitrogen atom donors. The cobalt complexes 1 and 2 were supported on ordered mesoporous carbon (OMC) by π-π stacking, resulting in heterogenized cobalt materials 6-FP-Co-OMC-1 and 5-FP-Co-OMC-2, respectively, and studied for electrocatalytic water oxidation. We find that 6-FP-Co-OMC-1 exhibits an overpotential of 355 mV for a current density of 10 mA cm -2 and a turnover frequency (TOF) of ~0.53 s -1 at an overpotential of 400 mV at pH 14. 6-FP-Co-OMC-1 exhibits activity that is ~1.6 times that of 5-FP-Co-OMC-2, which gives a TOF of 0.32 s -1 at 400 mV overpotential. The structural stability of the single-atom Co site was demonstrated for 6-FP-Co-OMC-1 using X-ray absorption spectroscopy for the molecular complex supported on OMC, but slow degradation in catalyst activity can be attributed to eventual formation of Co oxide clusters. DFT computations of electrocatalytic water oxidation using the molecular complexes as models provide a description of the catalytic mechanism. These studies reveal that the mechanism for O-O bond formation involves an intermediate Co IV oxo complex that undergoes an intramolecular reductive O-O coupling to form a Co II -OOH species. Further, the calculations predict that the molecular 6-FP-Co structure is more active for electrocatalytic water oxidation than 5-FP-Co, which is consistent with experimental studies of 6-FP-Co-OMC-1 and 5-FP-Co-OMC-2, highlighting the possibility that the ligand structure influences the catalytic activity of the supported molecular catalysts.

25 ENERGY STORAGE↗
DOE OSTI2022

Role of High-Spin Species and Pendant Amines in Electrocatalytic Alcohol Oxidation by a Nickel Phosphine Complex

We report the development of active and efficient electrocatalysts for oxidation of alcohols using earth-abundant metals will aid the progress towards a renewable energy economy. Here we present a detailed mechanistic study of electrocatalytic benzyl alcohol oxidation by a molecular nickel complex containing pendant amines using a combination of kinetic studies, NMR spectroscopy, and density functional theory. The catalyst preferentially binds alcohol in high-spin octahedral geometry, but this complex is not readily deprotonated by exogeneous base and inhibits catalysis. Dissociation of one or more solvent ligands returns the complex to a low-spin state that can be deprotonated. Kinetic modeling indicates the off-cycle high-spin intermediate lowers the catalytic turnover frequency by a factor of eight, suggesting that substantial gains in activity can be attained by improvements to the catalyst coordination geometry. In a second finding, we demonstrate the pendant amine of the catalyst only functions as a proton relay for the potential-determining step, oxidation of a nickel hydride intermediate, but does not have a substantial impact on the overall rate for oxidation of benzyl alcohol to benzaldehyde. This result contradicts the common expectation for pendant amines to participate in rate-limiting proton transfer reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Asymmetrical C–C Coupling for Electroreduction of CO on Bimetallic Cu–Pd Catalysts

Electroreduction of carbon monoxide (CO) possesses great potential for achieving the renewable synthesis of hydrocarbon chemicals from CO 2 . We report here selective reduction of CO to acetate using Cu–Pd bimetallic electrocatalysts. High activity and selectivity are demonstrated for CO-to-acetate conversion with >200 mA/cm 2 in geometric current density and >65% in Faradaic efficiency (FE). An asymmetrical C–C coupling mechanism is proposed to explain the composition-dependent catalytic performance and high selectivity toward acetate. This mechanism is supported by the computationally predicted shift of the *CO adsorption from the top-site configuration on Cu (or Cu-rich) surfaces to the bridge sites of Cu–Pd bimetallic surfaces, which is also associated with the reduction of the CO hydrogenation barrier. Further kinetic analysis of the reaction order with respect to CO and Tafel slope supports a reaction pathway with *CO–*CHO recombination following a CO hydrogenation step, which could account for the electroreduction of CO to acetate on the Cu–Pd bimetallic catalysts. Furthermore, our work highlights how heteroatomic alloy surfaces can be tailored to enable distinct reaction pathways and achieve advanced catalytic performance beyond monometallic catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Electrochemical CO2 Reduction over Metal-/Nitrogen-Doped Graphene Single-Atom Catalysts Modeled Using the Grand-Canonical Density Functional Theory

Renewably driven, electrochemical conversion of carbon dioxide into value-added products is expected to be a critical tool in global decarbonization. However, theoretical studies based on the computational hydrogen electrode largely ignore the nonlinear effects of the applied potential on the calculated results, leading to inaccurate predictions of catalytic behavior or mechanistic pathways. Here, we use grand canonical density functional theory (GC-DFT) to model electrochemical CO2 reduction (CO2R) over metal- and nitrogen-doped graphene catalysts (MNCs) and explicitly include the effects of the applied potential. We used GC-DFT to compute the CO2 to CO reaction intermediate energies at -0.3, -0.7, and -1.2 VSHE catalyzed by MNCs each doped with 1 of the 10 3d block metals coordinated by four pyridinic nitrogen atoms. Our results predict that Sc-, Ti-, Co-, Cu-, and Zn-N4Cs effectively catalyze CO2R at moderate to large reducing potentials (-0.7 to -1.2 VSHE). ZnN4C is a particularly promising electrocatalyst for CO2R to CO both at low and moderate applied potentials based on our thermodynamic analysis. Our findings also explain the observed pH independence of CO production over FeN4C and predict that the rate-determining step of CO2R over FeN4C is not *CO2- formation but rather *CO desorption. Additionally, the GC-DFT-computed density of states analysis illustrates how the electronic states of MNCs and adsorbates change non-uniformly with applied potential, resulting in a significantly increased *CO2- stability relative to other intermediates and demonstrating that the formation of the adsorbed *CO2- anion is critical to CO2R activation. This work demonstrates how GC-DFT paves the way for physically realistic and accurate theoretical simulations of reacting electrochemical systems.

CO2 reduction↗
DOE OSTI2022

Exchange Coupling Determines Metal-Dependent Efficiency for Iron- and Cobalt-Catalyzed Photochemical CO 2 Reduction

Catalysts promoting multielectron charge delocalization offer selectivity for the CO 2 reduction reaction (CO 2 RR) over the competing hydrogen evolution reaction. Here, we show metal–ligand exchange coupling as an example of charge delocalization that can determine the efficiency for photocatalytic CO 2 RR. A comparative evaluation of iron and cobalt complexes supported by the redox-active ligand tpyPY2Me establishes that the two-electron reduction of [Co(tpyPY2Me)] 2+ ([Co] 2+ ) occurs at potentials 770 mV more negative than the [Fe(tpyPY2Me)] 2+ ([Fe] 2+ ) analogue by maximizing the exchange coupling in the latter compound. The positive shift in the reduction potential promoted by metal–ligand exchange coupling drives [Fe] 2+ to be among the most active and selective molecular catalysts for photochemical CO 2 RR reported to date, maintaining up to 99% CO product selectivity with total turnover numbers (TONs) and initial turnover frequencies exceeding 30,000 and 900 min –1 , respectively. In contrast, [Co] 2+ shows much lower CO 2 RR activity, reaching only ca. 600 TON at 83% CO product selectivity under similar conditions accompanied by rapid catalyst decomposition. Further, the spin density plots of the two-electron reduced [Co] 0 complex implicate a paramagnetic open-shell doublet ground state compared to the diamagnetic open-shell singlet ground state of reduced [Fe] 0 , rationalizing the observed negative shift in two-electron reduction potentials from the [M] 2+ species and lowered CO 2 RR efficiency for the cobalt complex relative to its iron congener. This work emphasizes the contributions of multielectron metal–ligand exchange coupling in promoting effective CO 2 RR and provides a starting point for the broader incorporation of this strategy in catalyst design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Mixed-Metal Nickel–Iron Oxide Aerogels for Oxygen Evolution Reaction

Alkaline electrolyte membrane electrolyzers are a promising technology to efficiently produce clean hydrogen without the use of critical raw materials. At the heart of these electrolyzers are the electrocatalysts, which facilitate the cathodic and anodic reactions, with the latter oxygen evolution reaction (OER) being the most sluggish. In recent years, aerogels have become a very well-studied class of materials due to their unique properties, including very high surface area. Until now, aerogels have not been used to catalyze the OER by themselves but were mainly considered catalyst supports. Here, mixed-metal nickel–iron oxide aerogels were synthesized with a modified epoxide route synthesis and tested as OER catalysts. Depending on the Ni/Fe ratio, they show very high catalytic activity and low overpotential to reach 10 mA cm –2 (at η = 380 mV). This activity is beyond that of the existing state-of-the-art platinum group metal-free OER catalysts.

PGM free catalysts↗
DOE OSTI2022

Optimizing Catalysis by Combining Molecular Scaling Relationships: Iron Porphyrin-Catalyzed Electrochemical Oxygen Reduction as a Case Study

Here, the present work demonstrates the generality of molecular scaling relationships toward achieving faster catalysis at lower overpotentials. In iron porphyrin-catalyzed oxygen reduction, independent tuning of the catalyst E 1/2 and buffer pK a resulted in improvement of both the maximum turnover frequency (TOF max ) and the effective overpotential (η eff ). Interestingly, the most optimal system is achieved with the most reducing catalyst and a weak buffered acid—a perhaps counterintuitive conclusion. More generally, this study illustrates a path to optimization of catalytic systems through their differing responses to changes in the intrinsic features of the system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗