Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “diffuser”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 577 records · Page 32

Optimization design of helium circulator diffuser in HTR-PM - 18488

Circulator is very important in HTR-PM. It needs to supply enough pressure rise to circulate cooled helium in the primary loop of HTR-PM to bring heat out. Its pressure rise requirement is the highest among the worldwide circulators. Diffuser is one main component to produce pressure rise for circulator. And the most particular for HTR-PM is that the helium must flow out from two round tubes after flowing through the diffuser, which is very different from other circulators. This special export structure increases flow loss and decreases diffuser efficiency. So it is necessary to optimize diffuser to satisfy high pressure rise requirement of HTR-PM circulator with the special export structure. Four geometrical variables of diffuser have been studied and optimized. Based on the flow and performance analysis, the optimum structure was chosen. Then the detailed simulation was done by combining it with impeller to obtain performance characteristics of the whole circulator. Finally, the simulation results were compared with experimental results. It was obtained that simulation pressure rise was 201 kPa and experimental result was 210 kPa, which verified that optimization design of diffuser was effective. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Dirichlet absorbing boundary conditions for classical and peridynamic diffusion-type models

Diffusion-type problems in (nearly) unbounded domains play important roles in various fields of fluid dynamics, biology, and materials science. The aim of this paper is to construct accurate absorbing boundary conditions (ABCs) suitable for classical (local) as well as nonlocal peridynamic (PD) diffusion models. The main focus of the present study is on the PD diffusion formulation. The majority of the PD diffusion models proposed so far are applied to bounded domains only. In this study, we propose an effective way to handle unbounded domains both with PD and classical diffusion models. For the former, we employ a meshfree discretization, whereas for the latter the finite element method (FEM) is employed. The proposed ABCs are time-dependent and Dirichlet-type, making the approach easy to implement in the available models. The performance of the approach, in terms of accuracy and stability, is illustrated by numerical examples in 1D, 2D, and 3D.

36 MATERIALS SCIENCE↗

Kinetic energy dependence of carrier diffusion in a GaAs epilayer studied by wavelength selective PL imaging

Photoluminescence (PL) imaging has been shown to be an efficient technique for investigating carrier diffusion in semiconductors. In the past, the measurement was typically carried out by measuring at one wavelength (e.g., at the band gap) or simply the whole emission band. At room temperature in a semiconductor like GaAs, the band-to-band PL emission may occur in a spectral range over 200 meV, vastly exceeding the average thermal energy of about 26 meV. To investigate the potential dependence of the carrier diffusion on the carrier kinetic energy, we performed wavelength selective PL imaging on a GaAs double hetero-structure in a spectral range from about 70 meV above to 50 meV below the bandgap, extracting the carrier diffusion lengths at different PL wavelengths by fitting the imaging data to a theoretical model. The results clearly show that the locally generated carriers of different kinetic energies mostly diffuse together, maintaining the same thermal distribution throughout the diffusion process. Potential effects related to carrier density, self-absorption, lateral wave-guiding, and local heating are also discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Nonadiabatic Effects on Defect Diffusion in Silicon-Doped Nanographenes

Single atom impurities in graphene, substitutional silicon defects in particular, have been observed to diffuse under electron beam irradiation. However, the relative importance of elastic and inelastic scattering in facilitating their mobility remains unclear. Here, we employ excited-state electronic structure calculations to explore potential inelastic effects, and find an electronically nonadiabatic excited-state silicon diffusion pathway involving “softened” Si–C bonding that presents an ~2 eV lower diffusion barrier than the ground-state pathway. Beam-induced transition rates to this state indicate that the excited-state pathway is accessible through irradiation of the defect site. However, even in the limit of fully elastic scattering, upward nonadiabatic transitions are also possible along the diffusion coordinate, increasing the diffusion barrier and further demonstrating the potential for electronic nonadiabaticity to influence beam-induced atomic transformations in materials. Additionally, we also propose some experimentally testable signatures of such excited-state pathways.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Insights into the Li Diffusion Mechanism in Si/C Composite Anodes for Lithium-Ion Batteries

Recently, Si/C composite materials have attracted enormous research interest as the most promising candidates for the anodes of next-generation lithium-ion batteries, owing to their high energy density and mechanical buffering property. However, the fundamental mechanism of Li diffusion behavior in various Si/C composite materials remains unclear, with our understanding limited by experimental techniques and continuum modeling methodologies. Herein, the atomic behavior of Li diffusion in the Si/C composite material is studied within the framework of density functional theory. Two representative structural mixing formats, that is, simple mixture mode and core-shell mode, are modeled and compared. We discover that the carbon material increases Li diffusion in silicon from 7.75 x 10 -5 to 2.097 x 10 -4 cm 2 /s. The boost is about 50% more obvious in the mixture mode, while the core-shell structure shows more dependence on the atomic structures of the carbon layer. These results offer new insights into Li diffusion behavior in Si/C composites and unlock the enhancing mechanism for Li diffusion in Si/C. Furthermore, this understanding facilitates the modeling of batteries with composite anodes and will guide the corresponding structure designs for robust and high-energy-density batteries.

25 ENERGY STORAGE↗

Strong influence of periodic boundary conditions on lateral diffusion in lipid bilayer membranes

The Saffman-Delbrück hydrodynamic model for lipid-bilayer membranes is modified to account for the periodic boundary conditions commonly imposed in molecular simulations. Predicted lateral diffusion coefficients for membrane-embedded solid bodies are sensitive to box shape and converge slowly to the limit of infinite box size, raising serious doubts for the prospects of using detailed simulations to accurately predict membrane-protein diffusivities and related transport properties. Estimates for the relative error associated with periodic boundary artifacts are 50% and higher for fully atomistic models in currently feasible simulation boxes. MARTINI simulations of LacY membrane protein diffusion and LacY dimer diffusion in DPPC membranes and lipid diffusion in pure DPPC bilayers support the underlying hydrodynamic model.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Analysis of Anisotropic Nonlocal Diffusion Models: Well-posedness of Fractional Problems for Anomalous Transport

We analyze the well-posedness of an anisotropic, nonlocal diffusion equation. Establishing an equivalence between weighted and unweighted anisotropic nonlocal diffusion operators in the vein of unified nonlocal vector calculus, we apply our analysis to a class of fractional-order operators and present rigorous estimates for the solution of the corresponding anisotropic anomalous diffusion equation. Furthermore, we extend our analysis to the anisotropic diffusion-advection equation and prove well-posedness for fractional orders s ∊ [0.5, 1). We also present an application of the advection-diffusion equation to anomalous transport of solutes.

97 MATHEMATICS AND COMPUTING↗

Turbulent Transport by Diffusive Stratified Shear Flows: From Local to Global Models. I. Numerical Simulations of a Stratified Plane Couette Flow

Shear-induced turbulence could play a significant role in mixing momentum and chemical species in stellar radiation zones, as discussed by Zahn. In this paper we analyze the results of direct numerical simulations of stratified plane Couette flows, in the limit of rapid thermal diffusion, to measure the turbulent viscosity and the turbulent diffusivity of a passive tracer as a function of the local shear and the local stratification. We find that the stability criterion proposed by Zahn, namely that the product of the gradient Richardson number and the Prandtl number must be smaller than a critical values (JPr){sub c} for instability, adequately accounts for the transition to turbulence in the flow, with (JPr){sub c}≃0.007. This result recovers and confirms the prior findings of Prat et al. Zahn’s model for the turbulent diffusivity and viscosity, namely that the mixing coefficient should be proportional to the ratio of the thermal diffusivity to the gradient Richardson number, does not satisfactorily match our numerical data. It fails (as expected) in the limit of large stratification where the Richardson number exceeds the aforementioned threshold for instability, but it also fails in the limit of low stratification where the turbulent eddy scale becomes limited by the computational domain size. We propose a revised model for turbulent mixing by diffusive stratified shear instabilities that properly accounts for both limits, fits our data satisfactorily, and recovers Zahn’s model in the limit of large Reynolds numbers.

79 ASTRONOMY AND ASTROPHYSICS↗

Diffusion of Oxygen Isotopes in Thermally Evolving Planetesimals and Size Ranges of Presolar Silicate Grains

Presolar grains are small particles found in meteorites through their isotopic compositions, which are considerably different from those of materials in the solar system. If some isotopes in presolar grains diffused out beyond their grain sizes when they were embedded in parent bodies of meteorites, their isotopic compositions could be washed out, and hence the grains could no longer be identified as presolar grains. We explore this possibility for the first time by self-consistently simulating the thermal evolution of planetesimals and the diffusion length of {sup 18}O in presolar silicate grains. Our results show that presolar silicate grains smaller than ∼0.03 μ m cannot keep their original isotopic compositions even if the host planetesimals experienced a maximum temperature as low as 600 °C. Since this temperature corresponds to that experienced by petrologic type 3 chondrites, isotopic diffusion can constrain the size of presolar silicate grains discovered in such chondrites to be larger than ∼0.03 μ m. We also find that the diffusion length of {sup 18}O reaches ∼0.3–2 μ m in planetesimals that were heated up to 700–800°C. This indicates that, if the original size of presolar grains spans a range from ∼0.001 μ m to ∼0.3 μ m like that in the interstellar medium, then the isotopic records of the presolar grains may be almost completely lost in such highly thermalized parent bodies. We propose that isotopic diffusion could be a key process to control the size distribution and abundance of presolar grains in some types of chondrites.

79 ASTRONOMY AND ASTROPHYSICS↗

Anomalous Transport of Cosmic Rays in a Nonlinear Diffusion Model

We investigate analytically and numerically the transport of cosmic rays following their escape from a shock or another localized acceleration site. Observed cosmic-ray distributions in the vicinity of heliospheric and astrophysical shocks imply that anomalous, superdiffusive transport plays a role in the evolution of the energetic particles. Several authors have quantitatively described the anomalous diffusion scalings, implied by the data, by solutions of a formal transport equation with fractional derivatives. Yet the physical basis of the fractional diffusion model remains uncertain. We explore an alternative model of the cosmic-ray transport: a nonlinear diffusion equation that follows from a self-consistent treatment of the resonantly interacting cosmic-ray particles and their self-generated turbulence. The nonlinear model naturally leads to superdiffusive scalings. In the presence of convection, the model yields a power-law dependence of the particle density on the distance upstream of the shock. Although the results do not refute the use of a fractional advection–diffusion equation, they indicate a viable alternative to explain the anomalous diffusion scalings of cosmic-ray particles.

79 ASTRONOMY AND ASTROPHYSICS↗

Space-Dependent Wielandt Shift Methods for Multigroup Diffusion Eigenvalue Problems

In the calculation of neutronic eigenfunctions and eigenvalues, it is often desirable to approximate the neutron transport equation by a diffusion equation that requires significantly less computational resources to solve. Even when a full transport solution is needed, the solution of the diffusion system can be used to accelerate iterative methods for calculating the transport eigenfunction and eigenvalue. The convergence rate of the basic power iteration method for eigenvalue problems is governed by the dominance ratio; realistic reactor core problems often have high dominance ratios and the power iteration method can converge slowly as a result. A common technique for accelerating the convergence of power iteration is the Wielandt shift (WS) method, which reduces the dominance ratio by 'shifting' the eigenvalue spectrum using an estimate of the desired eigenvalue. WS provides a significant speedup over power iteration if the eigenvalue estimate is close to the true eigenvalue, but it can be difficult to obtain such an estimate. In practice, the shift in the WS method can be dynamically updated in the iteration scheme, in a way that depends on the eigenvalue estimates from the most recent iterations. We present a physically-motivated Space-Dependent Wielandt Shift (SDWS) for solving multigroup diffusion eigenvalue problems. The space-dependence of the eigenvalue shift in SDWS enables a more effective acceleration of the power iteration scheme than WS at the beginning of the iteration scheme, when the current estimate of the eigenvalue is not close to the actual eigenvalue. Several variants of SDWS are discussed here, including an SDWS method that combines the strengths of SDWS (in the early iterations) with those of standard WS (in the later iterations). Numerical results from a 1-D multigroup diffusion problem demonstrate an order of magnitude speedup over power iteration and a 41% speedup over a standard WS technique. This speedup is problem-dependent and appears to be greater for 'more difficult' problems. In this summary, the term 'speedup' refers to a reduction in the number of iterations required to converge to the correct eigenvalue and eigenfunction. Because the scattering is treated fully implicitly (i.e., it is part of the left-hand side of the diffusion system and directly inverted), the computational cost of a single iteration does not vary significantly among the methods discussed in this summary. The number of iterations is therefore representative of the total computational cost for a method. We acknowledge that certain iterative solvers for linear systems (e.g., GMRES) require more computational time to converge when the system is nearly singular (i.e., when a very aggressive Wielandt shift is applied). Nonetheless, when using SDWS in the manner described in this summary, we have seen that the reduction in computational time from reducing the number of power iterations generally outweighs the extra computational time required by iterative solvers such as GMRES. (authors)

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Value of Formalin Fixation for the Prolonged Preservation of Rodent Myocardial Microanatomical Organization: Evidence by MR Diffusion Tensor Imaging

Previous ex vivo diffusion tensor imaging (DTI) studies on formalin-fixed myocardial tissue assumed that, after some initial changes in the first 48 hr since the start of fixation, DTI parameters remain stable over time. Prolonged preservation of cardiac tissue in formalin prior to imaging has been seen many times in the DTI literature as it is considered orderly. Here, our objective is to define the effects of the prolonged cardiac tissue exposure to formalin on tissue microanatomical organization, as this is assessed by DTI parameters. DTI experiments were conducted on eight excised rodent hearts that were fixed by immersion in formalin. The samples were randomly divided into two equinumerous groups corresponding to shorter (~2 weeks) and more prolonged (~6–8 weeks) durations of tissue exposure to formalin prior to imaging. We found that when the duration of cardiac tissue exposure to formalin before imaging increased, water diffusion became less restricted, helix angle (HA) histograms flattened out and exhibited heavier tails (even though the classic HA transmural variation was preserved), and a significant loss of inter-voxel primary diffusion orientation integrity was introduced. The prolonged preservation of cardiac tissue in formalin profoundly affected its microstructural organization, as this was assessed by DTI parameters. The accurate interpretation of diffusivity profiles necessitates awareness of the pitfalls of prolonged cardiac tissue exposure duration to formalin. The acquired knowledge works to the advantage of a proper experimental design of DTI studies of fixed hearts.

59 BASIC BIOLOGICAL SCIENCES↗

Amino Acid Immobilization of Copper Surface Diffusion on Cu(111)

Surface diffusion and molecular self-assembly are two critically important processes in chemistry and nature. Amino acids deposited on a Cu(111) surface driving a separation at the 2D limit between self-assembling molecules and diffusing copper atoms is reported. Since the self-assembling amino acids prefer non-planar, tridentate bonding with neighboring adatoms, they attach to and immobilize diffusing copper adatoms on the surface. This chemical interaction freezes out the copper diffusion causing the condensation of solid copper adatom islands on the surface. Such separation and immobilization are observed for eight different amino acids, suggesting the generality of this phenomenon beyond a single amino acid species. Furthermore, at elevated temperatures, a disruption of the prototypical Ostwald ripening of adatom islands is also observed. Here, these results provide fundamental insight into chiral molecular self-assembly and its interplay with metal atom surface diffusion.

36 MATERIALS SCIENCE↗

Bulk and Short-Circuit Anion Diffusion in Epitaxial Fe 2 O 3 Films Quantified Using Buried Isotopic Tracer Layers

Self-diffusion is a fundamental physical process that, in solid materials, is intimately correlated with both microstructure and functional properties. In this work, a universal approach is presented to precisely characterize self-diffusion in ionic solids by isotopically enriching anions and/or cations at specific locations within an epitaxial film stack, and characterize their redistribution at high spatial resolution with atom probe tomography. Nanoscale anion diffusivity is quantified in epitaxial α-Fe 2 O 3 thin films deposited by molecular beam epitaxy with a thin (10 nm) buried layer highly enriched in 18 O. The isotopic sensitivity of the atom probe allows precise measurement of 18 O distribution across the sharp interfaces between this layer and the surrounding Fe 2 O 3 after annealing. Short-circuit anion diffusion through 1D and 2D structural defects in Fe 2 O 3 are also directly visualized in 3D. This versatile approach to study precisely tailored thin film samples at high spatial and mass fidelity will facilitate a deeper understanding of atomic-scale diffusion phenomena.

36 MATERIALS SCIENCE↗

Distributions of Functionals of Switching Diffusions

The paper deals with methods of computation of distributions of functionals of switching diffusions. The switching between two collections of diffusion coefficients occurs at the Poisson time moments which are independent of the initial diffusions. One can also consider more general diffusions when the choice is made from three or more collections of diffusion coefficients.

97 MATHEMATICS AND COMPUTING↗

An Experimental Method to Measure Gaseous Diffusivity in Tight and Partially Saturated Porous Media via Continuously Monitored Mass Spectrometry

Detection of radioxenon and radioargon produced by underground nuclear explosions is one of the primary methods by which the Comprehensive Nuclear-Test–Ban Treaty (CTBT) monitors for nuclear activities. However, transport of these noble gases to the surface via barometric pumping is a complex process relying on advective and diffusive processes in a fractured porous medium to bring detectable levels to the surface. To better understand this process, experimental measurements of noble gas and chemical surrogate diffusivity in relevant lithologies are necessary. However, measurement of noble gas diffusivity in tight or partially saturated porous media is challenging due to the transparent nature of noble gases, the lengthy diffusion times, and difficulty maintaining consistent water saturation. Here, the quasi-steady-state Ney–Armistead method is modified to accommodate continuous gas sampling via effusive flow to a mass spectrometer. An analytical solution accounting for the cumulative sampling losses and induced advective flow is then derived. Experimental results appear in good agreement with the proposed theory, suggesting the presence of retained groundwater reduces the effective diffusivity of the gas tracers by 10–1000 times. Finally, by using a mass spectrometer, the method described herein is applicable to a broad range of gas species and porous media.

47 OTHER INSTRUMENTATION↗

Application of IR Thermography with Thermal Diffusivity Analysis for Detection of Plies Displacement in CFRP Composites

This paper presents an efficient nondestructive testing (NDT) method for detection of plies displacement in carbon fiber reinforced plastic (CFRP) composites using the active thermography technique. To assess the capability of the proposed technique for detection of plies displacement, the CFRP composite specimens with simulated fault were designed and manufactured. The IR thermography measurements were conducted using two-sided experimental arrangement. From recorded sequences of thermal images, the temperature variations versus time plots were extracted to obtain the maximum thermal contrasts. For quantitative interpretation of the results, the thermal diffusivity values for each composite material were determined and related to the fiber volume fraction. The experimental results showed that the thermal diffusivity increases with an increase of fiber volume fraction; further, the values of thermal diffusivity are specimen thickness dependent. The obtained values of thermal diffusivity varied from 1.5 × 10{sup −7} m{sup 2}/s (for 3.2 mm composite with 8.5 vol.% carbon fiber) to 2.6 × 10{sup −7} m{sup 2}/s (for 7.7 mm composite with 34.1 vol.% carbon fiber). On the basis of these results, it was concluded that the active thermography combined with thermal diffusivity analysis can be considered as a reliable NDT technique for detection of plies displacement in CFRP composites.

36 MATERIALS SCIENCE↗

A computational study of yttria-stabilized zirconia: II. Cation diffusion

Cubic yttria-stabilized zirconia is widely used in industrial electrochemical devices. While its fast oxygen ion diffusion is well understood, why cation diffusion is much slower—its activation energy (~5 eV) is 10 times that of anion diffusion—remains a mystery. Indeed, all previous computational studies predicted more than 5 eV is needed for forming a cation defect, and another 5 eV for moving one. In contrast, our ab initio calculations have correctly predicted the experimentally observed cation diffusivity. We found Schottky pairs are the dominant defects that provide cation vacancies, and their local environments and migrating path are dictated by packing preferences. As a cation exchanges position with a neighboring vacancy, it passes by an empty interstitial site and severely displaces two oxygen neighbors with shortened Zr-O distances. This causes a short-range repulsion against the migrating cation and a long-range disturbance of the surrounding, which explains why cation diffusion is relatively difficult. In comparison, cubic zirconia's migrating oxygen only minimally disturbs neighboring Zr, which explains why it is a fast oxygen conductor.

36 MATERIALS SCIENCE↗